Kinetics of transesterification of olive oil with methanol catalyzed by immobilized lipase derived from an isolated Burkholderia sp. strain

Kinetic and thermodynamic study of enzymatic hydroesterification mechanism to fatty acid methyl esters synthesis

Eversa® Transform 2.0 lipase used as biocatalyst to biodiesel (fatty acid methyl esters - FAME) synthesis has been the target of interesting studies due to its thermostability and cost-effectiveness. In these researches, data about reaction conditions that result in satisfactory yields were investigated. Nevertheless, kinetic and thermodynamic parameters considering this enzyme are scarce. This paper presents an estimation of kinetic and thermodynamic parameters for the Eversa® Transform 2.0-mediated hydroesterification to FAME synthesis. Kinetic studies were performed for different methanol, water and lipase loads in distinct temperatures. Parameters adjusted by the thermodynamic model indicate that the hydrolysis is decisive in the overall hydroesterification reaction rate and the esterification reaction is endothermic (ΔH_e = 38.98 kJ/mol). Formation of enzymatic complexes is favored by increasing the temperature, especially the enzyme-methanol inhibition complex. Statistical analysis showed that the model was not overparameterized, and the small confidence interval indicated good reliability of the estimated parameters.

Hydrophilic Glyceryl Ferulates Preparation Catalyzed by Free Lipase B from Candida antartica

Ferulic acid (FA), 4-hydroxyl-3-methoxy-2-benzylacrylic acid, has antioxidant, anticancer and ultraviolet absorption activities. However, the low hydrophilicity of FA has limited its application. Glyceryl ferulate (FG), which is an all-natural hydrophilic derivative of FA, can be used as an antioxidant and UV filter in food and cosmetic formulations. However, the applications of FG in these fields are limited due to its low content in nature. In this work, free liquid lipase was firstly used as a catalyst for FG preparation. Several different free liquid lipases (Candida antartica lipase-B, Candida antartica lipase-A, Thermomyces lanuginosus (Lipozyme TL 100L)) were screened and compared. The effects of the transesterification parameters (time, temperature, enzyme load and substrate ratio) were optimized and evaluated by response surface methodology. A reaction thermodynamic investigation was also performed. The results showed that, among the tested free lipases, the maximum FG yield (84.8±1.5%) was achieved using free Candida antartica lipase-B. Under the optimized conditions (an atmospheric system, an enzyme load of 11.1% and a 20:1 molar ratio of glycerol to EF at 70°C for 39.5 h), the FG yield and EF conversion were 84.8±1.5% and 95.7±1.2%, respectively. The activation energies of FG formation and EF conversion were 56.4 and 58.0kJ/mol, respectively.

Isolation and Characterization of a Novel Cold-Adapted Esterase, MtEst45, from Microbulbifer thermotolerans DAU221

A novel esterase, MtEst45, was isolated from a fosmid genomic library of Microbulbifer thermotolerans DAU221. The encoding gene is predicted to have a mass of 45,564 Da and encodes 495 amino acids, excluding a 21 amino acid signal peptide. MtEst45 showed a low amino acid identity (approximately 23–24%) compared with other lipolytic enzymes belonging to Family III, a closely related bacterial lipolytic enzyme family. MtEst45 also showed a conserved GXSXG motif, G₁₃₁IS₁₃₃YG₁₃₅, which was reported as active site of known lipolytic enzymes, and the putative catalytic triad composed of D₂₃₇ and H₂₆₅. Because these mutants of MtEst45, which was S₁₃₃A, D₂₃₇N, and H₂₆₅L, had no activity, these catalytic triad is deemed essential for the enzyme catalysis. MtEst45 was overexpressed in Escherichia coli BL21 (DE3) and purified via His-tag affinity chromatography. The optimal pH and temperature of MtEst45 were estimated to be 8.17 and 46.27°C by response surface methodology, respectively. Additionally, MtEst45 was also active between 1 and 15°C. The optimal hydrolysis substrate for MtEst45 among p-nitrophenyl esters (C₂–C₁₈) was p-nitrophenyl butyrate, and the K_m and V_max values were 0.0998 mM and 550 μmol/min/mg of protein, respectively. MtEst45 was strongly inhibited by Hg²⁺, Zn²⁺, and Cu²⁺ ions; by phenylmethanesulfonyl fluoride; and by β-mercaptoethanol. Ca²⁺ did not affect the enzyme's activity. These biochemical properties, sequence identity, and phylogenetic analysis suggest that MtEst45 represents a novel and valuable bacterial lipolytic enzyme family and is useful for biotechnological applications.

Adaptational properties and applications of cold-active lipases from psychrophilic bacteria

Psychrophilic microorganisms are cold-adapted with distinct properties from other thermal classes thriving in cold conditions in large areas of the earth's cold environment. Maintenance of functional membranes, evolving cold-adapted enzymes and synthesizing a range of structural features are basic adaptive strategies of psychrophiles. Among the cold-evolved enzymes are the cold-active lipases, a group of microbial lipases with inherent stability-activity-flexibility property that have engaged the interest of researchers over the years. Current knowledge regarding these cold-evolved enzymes in psychrophilic bacteria proves a display of high catalytic efficiency with low thermal stability, which is a differentiating feature with that of their mesophilic and thermophilic counterparts. Improvement strategies of their adaptive structural features have significantly benefited the enzyme industry. Based on their homogeneity and purity, molecular characterizations of these enzymes have been successful and their properties make them unique biocatalysts for various industrial and biotechnological applications. Although, strong association of lipopolysaccharides from Antarctic microorganisms with lipid hydrolases pose a challenge in their purification, heterologous expression of the cold-adapted lipases with affinity tags simplifies purification with higher yield. The review discusses these cold-evolved lipases from bacteria and their peculiar properties, in addition to their potential biotechnological and industrial applications.

A novel continuous flow biosynthesis of caffeic acid phenethyl ester from alkyl caffeate and phenethanol in a packed bed microreactor

Caffeic acid phenethyl ester (CAPE) is a rare natural ingredient with several biological activity, but the industrial production of CAPE using lipase-catalyzed esterification of caffeic acid (CA) and 2-phenylethanol (PE) in ionic liquids is hindered by low substrate concentrations and a long reaction time. To establish a high-efficiency bioprocess for obtaining CAPE, a novel continuous flow biosynthesis of CAPE from alkyl caffeate and PE in [Bmim][Tf2N] using a packed bed microreactor was successfully carried out. Among the tested alkyl caffeates and lipases, methyl caffeate and Novozym 435, respectively, were selected as the suitable substrate and biocatalyst. Under the optimum conditions selected using response surface methodology, a 93.21% CAPE yield was achieved in 2.5h using a packed bed microreactor, compared to 24h using a batch reactor. The reuse of Novozym 435 for 20 cycles and continuous reaction for 9 days did not result in any decrease in activity.

Hybrid periodic mesoporous organosilica designed to improve the properties of immobilized enzymes

Hybrid organosilica supports synthesized with pore size adjusted to enzyme dimensions provide high stability in organic solvent systems and prevent leaching.

Screening, purification and characterization of a novel cold-active and organic solvent-tolerant lipase from Stenotrophomonas maltophilia CGMCC 4254

An extracellular organic solvent-tolerant and cold-active lipase producing bacterium was isolated from oil-contaminated soil samples, and identified taxonomically as Stenotrophomonas maltophilia. The lipase from S. maltophilia CGMCC 4254 (SML) was purified 60.5-fold to homogeneity with 38.9 U/mg specific activity. Partially purified SML displayed remarkable stability in 50% and 100% (v/v) hydrophobic organic solvents after incubation for 7 days. The enzyme also retained more than 50% of its residual activity in several pure hydrophilic organic solvents after incubation for 7 days. SML showed 57% maximum activity at 5°C, and had optimal activity at 35°C. These unique properties of SML make it promising as a biocatalyst for industrial processes.