Pulsed electric field pretreatment of rapeseed green biomass (stems) to enhance pressing and extractives recovery

Polyphenol Extraction from Food (by) Products by Pulsed Electric Field: A Review

Nowadays, more and more researchers engage in studies regarding the extraction of bioactive compounds from natural sources. To this end, plenty of studies have been published on this topic, with the interest in the field growing exponentially. One major aim of such studies is to maximize the extraction yield and, simultaneously, to use procedures that adhere to the principles of green chemistry, as much as possible. It was not until recently that pulsed electric field (PEF) technology has been put to good use to achieve this goal. This new technique exhibits many advantages, compared to other techniques, and they have successfully been reaped for the production of extracts with enhanced concentrations in bioactive compounds. In this advancing field of research, a good understanding of the existing literature is mandatory to develop more advanced concepts in the future. The aim of this review is to provide a thorough discussion of the most important applications of PEF for the enhancement of polyphenols extraction from fresh food products and by-products, as well as to discuss the current limitations and the prospects of the field.

Sustainable Isolation of Bioactive Compounds and Proteins from Plant-Based Food (and Byproducts)

Plant-based food produces significantly less greenhouse gases, and due to its wealth of bioactive components and/or plant-based protein, it becomes an alternative in a sustainable food system. However, the processing and production of products from plant sources creates byproducts, which can be waste or a source of useful substances that can be reused. The waste produced during the production and processing of food is essentially nutrient- and energy-rich, and it is recognized as an excellent source of secondary raw materials that could be repurposed in the process of manufacturing and preparing food, or as feed for livestock. This review offers an overview of the sources and techniques of the sustainable isolation of bioactive substances and proteins from various sources that might represent waste in the preparation or production of food of plant origin. The aim is to uncover novel approaches to use waste and byproducts from the process of making food to provide this waste food an additional benefit, not forgetting the expectations of the end user, the consumer. For the successful isolation of bioactive ingredients and proteins from food of plant origin, it is crucial to develop more eco-friendly and efficient extraction techniques with a low CO2 footprint while considering the economic aspects.

A comprehensive review on the biological conversion of lignocellulosic biomass into hydrogen: Pretreatment strategy, technology advances and perspectives

The globe has dependent on energy generation and utilization for many years; conversely, ecological concerns constrained the world to view hydrogen as an alternative for economic development. Lignocellulosic biomass is broadly accessible as a low-cost renewable feedstock and nonreactive nature; it has received a lot of consideration as a global energy source and the most attractive alternative to replace fossil natural substances for energy production. Pretreatment of lignocellulosic biomass is essential to advance its fragmentation and lower the lignin content for sustainable energy generation. This review's goal is to provide the different pretreatment strategies for enlarging the solubility and surface area of lignocellulosic biomass. The biological conversion of lignocellulosic biomass to hydrogen was reviewed and operational conditions and enhancing methods were discussed. This review summarizes the working conditions, parameters, yield percentages, techno-economic analysis, challenges, and future recommendations on the direct conversion of biomass to hydrogen.

Antioxidant and Anti-Inflammatory Effects of Extracts from Pulsed Electric Field-Treated Artichoke By-Products in Lipopolysaccharide-Stimulated Human THP-1 Macrophages

In this study, pulsed electric field (PEF-3 kV/cm; 5 kJ/kg) pretreatment was used to intensify the extractability of valuable intracellular compounds from artichoke by-products during a subsequent aqueous extraction (solid-liquid ratio = 1:10 g/mL, T = 20 °C; t = 120 min). Total phenolic content (TPC), antioxidant activity (DPPH, ABTS) and HPLC-PDA analysis of the artichoke extract (AE) and the biological effects on human cell lines were determined. Chlorogenic acid was found to be the most abundant phenolic compound (53% of the TPC) in the AE. The extract showed good antioxidant properties in a concentration-dependent manner. The potential biological effects of AE were investigated using THP-1 macrophages stimulated by lipopolysaccharides (LPS) as an in vitro model system of oxidative stress. Reduced reactive oxygen species production upon treatment with AE was found. Moreover, AE was able to reduce the secretion of the pro-inflammatory mediators Interleukin-6 and Monocyte Chemoattractant Protein-1 in LPS-stimulated macrophages, as determined by qRT-PCR and ELISA assays. These results highlighted the anti-inflammatory and antioxidant properties of the extracts from PEF-treated artichoke by-products, corroborating their potential application as a source of functional ingredients obtained through a feasible and sustainable process.

Aqueous Extraction of Curcuminoids from Curcuma longa: Effect of Cell Disintegration Pre-treatment and Extraction Condition

Cell structure modification techniques have the potential to improve curcuminoid recovery in Curcuma longa. In this study, different pre-treatments such as high hydrostatic pressure (HPP, high pressure processing), ultrasound (US), pulsed electric field (PEF), and ohmic heating (OH) were used on dried C. longa before aqueous extraction at pH 2.0, 5.0, and 8.0. The released curcuminoids, cell disintegration index (Zp), particle size distribution (PSD), and color (CIE L*, a*, b*) were used to evaluate the different pre-treatment impacts on plant structure and extract properties. In untreated turmeric, the highest amount of released curcuminoids (3.89 mg/g dry matter) was obtained after extraction for 30 min at 95° in the aqueous phase. After pre-treatments, the acidic conditions showed a considerable improvement in curcuminoid recovery; PEF, HPP, and OH improved the curcuminoid recovery by 3.39-, 3.13-, and 1.24-fold, respectively; while US did not lead to an increased release of curcuminoids compared to the untreated material. The highest curcuminoid recovery (with PEF and extraction at pH 5.0) was 6.6% w/w of the total curcuminoids. The non-thermal pre-treatments have less impact on the extract’s color compared to the extraction pH, with alkaline conditions reducing the lightness of the extract.

Bioprospecting lipid-producing microorganisms: From metagenomic-assisted isolation techniques to industrial application and innovations

Traditionally, lipid-producing microorganisms have been obtained via conventional bioprospecting based on isolation and screening techniques, demanding time and effort. Thus, high-throughput sequencing combined with conventional microbiological approaches has emerged as an advanced and rapid strategy for recovering novel oleaginous microorganisms from target environments. This review highlights recent developments in lipid-producing microorganism bioprospecting, following (i) from traditional cultivation techniques to state-of-the-art metagenomics approaches; (ii) related topics on workflow, next-generation sequencing platforms, and knowledge bioinformatics; and (iii) biotechnological potential of the production of docosahexaenoic acid (DHA) by Aurantiochytrium limacinum, arachidonic acid (ARA) by Mortierella alpina and biodiesel by Rhodosporidium toruloides. These three species have been shown to be highly promising and studied in research articles, patents and commercialized products. Trends, innovations and future perspectives of these microorganisms are also addressed. Thus, these microbial lipids allow the development of food, feed and biofuels as alternative solutions to animal and vegetable oils.

Enhancement of Polyphenols Recovery from Rosa canina, Calendula officinalis and Castanea sativa Using Pulsed Electric Field

The current study evaluates the Pulsed Electric Field (PEF) technique for the extraction of polyphenols from the plants Rosa canina, Calendulaofficinalis and Castanea sativa. These plants are traditionally used both for the preparation of therapeutic decoctions and the aromatization of beverages (alcoholic or not). Pulses of 10 μs duration were used to apply electric field intensities ranging from 1.2 to 2.0 kV cm−1. The period of the phenomenon was set to 1 ms, with a total extraction time of 20 min. The total polyphenol content as well as the identified polyphenolic compounds of the extracts were determined for monitoring and evaluation. To estimate the PEF effect, control extracts were prepared using the same process as PEF extracts but without the application of electric field. For all the three plant materials studied, the PEF technique appeared to be successful in increasing polyphenols extraction. The application of a moderate to high electric field, up to 1.4 kV cm−1, resulted in increased total and individual polyphenols recovery, reaching 63.79% and 84%, respectively, in the case of Rosa canina fruits.

Cellulose Recovery from Agri-Food Residues by Effective Cavitational Treatments

Residual biomass from agri-food production chain and forestry are available in huge amounts for further valorisation processes. Delignification is usually the crucial step in the production of biofuels by fermentation as well as in the conversion of cellulose into high added-value compounds. High-intensity ultrasound (US) and hydrodynamic cavitation (HC) have been widely exploited as effective pretreatment techniques for biomass conversion and in particular for cellulose recovery. Due to their peculiar mechanisms, cavitational treatments promote an effective lignocellulosic matrix dismantling with delignification at low temperature (35–50 °C). Cavitation also promotes cellulose decrystallization due to a partial depolymerization. The aim of this review is to highlight recent advances in US and HC-assisted delignification and further cellulose recovery and valorisation.

Pulsed electric field: An emerging pretreatment technology in a biogas production

This review focuses on current status of pulsed electric field (PEF) technology and its implementation in biogas production. First, basic principles of PEF and a schematic overview of typical PEF processing system were provided. Thereafter, lab- and pilot-scale PEF pretreatments of sludge with subsequent anaerobic digestion (AD) were provided. Furthermore, PEF technology, as an emerging technology for the lignocellulose (LC) pretreatment in biogas production which is still predominantly used at lab-scale, was outlined. Eventually, conclusion together with future perspectives and challenges were outlined.

Protein extraction from agri-food residues for integration in biorefinery: Potential techniques and current status

The biorefinery concept is attracting scientific and policy attention as a promising option for enhancing the benefits of agri-food biomass along with a reduction of the environmental impact. Obtaining bioproducts based on proteins from agri-food residues could help to diversify the revenue stream in a biorefinery. In fact, the extracted proteins can be applied as such or in the form of hydrolyzates due to their nutritional, bioactive and techno-functional properties. In this context, the present review summarizes, exemplifies and discusses conventional extraction methods and current trends to extract proteins from residues of the harvesting, post-harvesting and/or processing of important crops worldwide. Moreover, those extraction methods just integrated in a biorefinery scheme are also described. In conclusion, a plethora of methods exits but only some of them have been applied in biorefinery designs, mostly at laboratory scale. Their economic and technical feasibility at large scale requires further study.

Novel technologies applied for recovery and value addition of high value compounds from plant byproducts: A review

Plant byproducts of food processing industry line are undervalued yet important resource. These byproducts contain large percentage of high value functional substances such as antioxidants, pectin, polyphenols and so on. Recently, many research studies concentrated on innovative technologies that promise to overcome such issues as time consuming, inefficiency, and low yield, among others, which exist in most conventional techniques. Consequently, to achieve the recovery of nutraceuticals from high added-value by-products, it is necessary to have more knowledge of these novel technologies and more importantly explore the possibility of application of these latest technologies to the recovery downstream processing. The present work will summarize state-of-the-art technological approaches concerning extraction, superfine and drying applied to plant food processing residues. Simultaneously, the application of the bioactive components originated from byproducts in food industry will also be reviewed.

Recent updates on different methods of pretreatment of lignocellulosic feedstocks: a review

Lignocellulosic feedstock materials are the most abundant renewable bioresource material available on earth. It is primarily composed of cellulose, hemicellulose, and lignin, which are strongly associated with each other. Pretreatment processes are mainly involved in effective separation of these complex interlinked fractions and increase the accessibility of each individual component, thereby becoming an essential step in a broad range of applications particularly for biomass valorization. However, a major hurdle is the removal of sturdy and rugged lignin component which is highly resistant to solubilization and is also a major inhibitor for hydrolysis of cellulose and hemicellulose. Moreover, other factors such as lignin content, crystalline, and rigid nature of cellulose, production of post-pretreatment inhibitory products and size of feed stock particle limit the digestibility of lignocellulosic biomass. This has led to extensive research in the development of various pretreatment processes. The major pretreatment methods include physical, chemical, and biological approaches. The selection of pretreatment process depends exclusively on the application. As compared to the conventional single pretreatment process, integrated processes combining two or more pretreatment techniques is beneficial in reducing the number of process operational steps besides minimizing the production of undesirable inhibitors. However, an extensive research is still required for the development of new and more efficient pretreatment processes for lignocellulosic feedstocks yielding promising results.

Green Sonoextraction of Protein from Oleaginous Press Rapeseed Cake

In this study, extraction of soluble proteins from rapeseed cake using different conventional and innovative extraction processes in order to maximize the extraction yield has been investigated. Firstly, various extraction techniques including ultrasound, microwave, and percolation were tested to increase the protein recovery efficiency. Secondly, response surface methodology (RSM) using a central composite design (CCD) approach was applied to investigate the influence of process variables on ultrasound-assisted extraction (UAE). Statistical analysis revealed that the optimized conditions providing a protein yield of 4.24 g/100 g DM were an ultrasound power of 5.6 W·cm⁻² and temperature of 45 °C. Quantitatively UAE followed by two stages of conventional extraction gave the best total protein yield of 9.81 g/100 g DM. Qualitatively, the protein efficiency ratio (PER) used as measure of the nutritive value (12S/2S ratio) which indicates protein quality in terms of S-containing essential amino acids, was similar to that of the conventional extraction method. Small amounts of protein aggregate were observed in the HPLC profile of the extract.