Limited adsorption selectivity of active carbon toward non-saccharide compounds in lignocellulose hydrolysate

Integrated preparation of functional lignin nanoparticles and levulinic acid directly from the pre-hydrolysis liquor of poplar wood

The pre-hydrolysis liquor (PHL) produced during pulp dissolution and biomass refining is mainly composed of hemicellulose and lignin, and it is a potential source for production of value-added materials and platform chemicals; however, their utilization has been a serious challenge. In this study, we proposed a green and simple strategy to simultaneously prepare size-controlled functional lignin nanoparticles (LNPs) and levulinic acid (LA) from PHL as the raw material. The as-prepared LNPs exhibited remarkable stability thanks to the presence of saccharides with abundant oxygen-containing groups and surface charges, which prevented aggregation and maintained long-term storage stability. Trace amounts of the LNPs (≤ 0.2 wt%) could stabilize various Pickering emulsions, even with oil-to-water ratios as high as 5:5 (v/v). Subsequently, the remaining PHL was directly used to produce LA without adding a catalyst; under optimal conditions (160 °C and 1 h), the yield of LA was 56.3 % based on the dry saccharide content in the raw PHL. More importantly, p-toluenesulfonic acid (p-TsOH), the only reactive reagent used during the entire preparation process, including the two preparation steps of the LNPs and LA, was reusable, and the recovery rate was >70 % after five cycles. Overall, this green and simple strategy effectively and comprehensively utilized the PHL and showed potential for producing biobased nanomaterials and platform chemicals.

Nanogreen is the new future: the conversion of lignin and lignocellulosic wastes into nanomaterials

The lignocellulose biorefinery industry has assumed an important role within the current scenario. Lignin is an abundant and available biopolymer and one of the compounds present in the lignocellulosic waste. Therefore, processing lignin into new materials and nanomaterials, such as nanolignin, has attracted the attention of the scientific community. Lignin nanoparticles are materials that have excellent properties, such as biodegradability and non-toxicity, and have great potential as chelating agents, antimicrobials agents, UV protectors, nanofillers, adsorbents, catalysts, supercapacitors, emulsion stabilizers, delivered systems, drugs, and gene carriers. This review article covers the emergent scenario of nanolignin and the main aspects of scientific interest, such as the conversion and functionalization of lignin, the valorization of lignocellulose waste, and nanoparticle synthesis. A techno-economic evaluation of the biorefinery model of the nanolignin synthesis is presented based on the simulation of the process on the experimental and commercial databases available and reported by some authors. Finally, the techno-economic assessment is complemented by the life cycle assessment of various nanolignin synthesis pathways reported to evaluate the environmental implications and support this emergent technology development.

Review of HPLC-MS methods for the analysis of nicotine and its active metabolite cotinine in various biological matrices

In recent years, tobacco smoking is a risk factor for a series of diseases including cardiovascular diseases, cerebrovascular diseases, and cancers. Nicotine, the primary component of tobacco smoke, is mainly transformed to its active metabolite cotinine, which is often used as biomarker for tobacco exposure for its higher blood concentration and longer residence time than nicotine. Various analytical methods have been developed for the determination of nicotine and cotinine in biological matrices. This article reviewed the HPLC-MS based methods for nicotine and/or cotinine analysis in various biological matrices. The sample preparation, mass and chromatographic conditions and method validation results of these methods have been summarized and analyzed. Sample was mainly pretreated by protein precipitation and/or extraction. Separation was achieved using methanol and/or acetonitrile:water (with or without ammonium acetate) on C18 columns, and acetonitrile:water (with formic acid, ammonium acetate/formate) on HILIC columns. Nicotine-d3, nicotine-d4 and cotinine-d3 were commonly used internal standards. Other non-deuterated IS were also used such as ritonavir, N-ethylnorcotinine, and milrinone. For both nicotine and cotinine, the calibration range was 0.005-35000 ng/mL, the matrix effect was 75.96% - 126.8% and the recovery was 53% - 124.5%. The two analytes were stable at room temperature for 1-10 days, at -80 °C for up to 6 months, and after 3-6 freeze-thaw cycles. Comedications did not affect nicotine and cotinine analysis.

A Novel and Effective Recyclable BiOCl/BiOBr Photocatalysis for Lignin Removal from Pre-Hydrolysis Liquor

The presence of lignin hampers the utilization of hemicelluloses in the pre-hydrolysis liquor (PHL) from the kraft-based dissolving pulp production process. In this paper, a novel process for removing lignin from PHL was proposed by effectively recycling catalysts of BiOCl/BiOBr. During the whole process, BiOCl and BiOBr were not only adsorbents for removing lignin, but also photocatalysts for degrading lignin. The results showed that BiOCl and BiOBr treatments caused 36.3% and 33.9% lignin removal, respectively, at the optimized conditions, and the losses of hemicellulose-derived saccharides (HDS) were both 0.1%. The catalysts could be regenerated by simple photocatalytic treatment and obtain considerable CO and CO2. After 15 h of illumination, 49.9 μmol CO and 553.0 μmol CO2 were produced by BiOCl, and 38.7 μmol CO and 484.3 μmol CO2 were produced by BiOBr. Therefore, both BiOCl and BiOBr exhibit excellent adsorption and photocatalytic properties for lignin removal from pre-hydrolysis.

Separation of saccharides from prehydrolysis liquor of lignocellulose to upgrade dissolving pulp mill into biorefinery platform

In this work, a competitive process consisting of polyelectrolyte flocculation, active carbon absorption, and ion exchange was developed for hemicelluloses-derived saccharides (HDSs) purification from prehydrolysis liquor (PHL) of lignocellulose. Results showed that colloidal lignin counted for 20% of non-saccharide compounds (NSCs) and could be eliminated by flocculation at 500mg/L polyaluminium chloride and 50mg/L anionic polyacrylamide. Active carbon was very effective for decoloration of flocculation-treated PHL, but showed limited absorption selectivity toward NSCs. Lignin, the dominant component of NSCs, is characterized with phenolic hydrogen groups. Phenolic lignin could be easily captured by anion exchange resin with 80% removal. The proposed process showed great industrial potential because of the high value saccharides, but also low molecular phenolic lignin.