Cellulosic bioethanol production from Jerusalem artichoke (Helianthus tuberosus L.) using hydrogen peroxide-acetic acid (HPAC) pretreatment

Utilization of coffee waste as a sustainable feedstock for high-yield lactic acid production through microbial fermentation

Lactic acid is an important industrial precursor; however, high substrate costs are a major challenge in microbial fermentation-based lactic acid production. Coffee waste is a sustainable feedstock alternative for lactic acid production via microbial fermentation. Herein, the feasibility of coffee waste as a feedstock was explored by employing appropriate pretreatment methods and optimizing enzyme combinations. Coffee waste pretreatment with hydrogen peroxide and acetic acid along with a combination of Viscozyme L, Celluclast 1.5 L, and Pectinex Ultra SP-L achieved the 78.9 % sugar conversion rate at a substrate concentration of 4 % (w/v). Lactiplantibacillus plantarum WiKim0126-induced fermentation with a 4 % solid loading yielded a lactic acid concentration of 22.8 g/L (99.6 % of the theoretical maximum yield) and productivity of 0.95 g/L/h within 24 h. These findings highlight the viability of coffee waste as an eco-friendly resource for sustainable lactic acid production.

Extraction and characterization of nanocellulose from cattail leaves: Morphological, microstructural and thermal properties

Hydrogen peroxide combined with acid treatment demonstrates its respective characteristics for the separation of lignocellulosic biomass. Herein, holocellulose was extracted from Cattail leaves (CL) by a two-step treatment with alkali and hydrogen peroxide-acetic acid (HPAA). Then carboxylated nanocellulose was hydrolyzed with a mixed organic/inorganic acid. The chemical composition of the holocellulose and the physicochemical properties of the separated carboxylated nanocellulose were comparable. Carboxyl groups were introduced on the nanocellulose as a result of the esterification process with citric acid (CA), which endows the nanocellulose with high thermal stability (315-318 °C) and good light transmission (>80 %). Furthermore, morphological analyses revealed that nanocellulose had a spider-web-like structure with diameter between 5 and 20 nm.

Effect of peracetic acid generation in hydrogen peroxide-acetic acid pretreatment on production of xylooligosaccharides from poplar by organic acid hydrolysis

Hydrogen peroxide-acetic acid (HPAA) compositions affect the peracetic acid generation and subsequent delignification of lignocellulosic materials. However, the effects of HPAA compositions on lignin removal and poplar hydrolyzability after HPAA pretreatment are not fully elucidated yet. In this work, different volume ratios of HP to AA were used to pretreat poplar, AA and lactic acid (LA) hydrolysis of delignified poplar to produce XOS was compared. Peracetic acid was mainly produced in 1 h of HPAA pretreatment. HPAA with HP to AA ratio of 8:2 (HP₈AA₂) generated 4.4% peracetic acid and removed 57.7% of lignin at 2 h. Furthermore, XOS production from HP₈AA₂-pretreated poplar by AA and LA hydrolysis was increased by 97.1% and 14.9% compared to those from raw poplar, respectively. After alkaline incubation, the glucose yield of HP₈AA₂-AA-pretreated poplar increased from 40.1% to 97.1%. The study results indicated that HP₈AA₂ was conducive to XOS and monosaccharides production from poplar..

Low Indirect Land Use Change (ILUC) Energy Crops to Bioenergy and Biofuels—A Review

Energy crops are dedicated cultures directed for biofuels, electricity, and heat production. Due to their tolerance to contaminated lands, they can alleviate and remediate land pollution by the disposal of toxic elements and polymetallic agents. Moreover, these crops are suitable to be exploited in marginal soils (e.g., saline), and, therefore, the risk of land-use conflicts due to competition for food, feed, and fuel is reduced, contributing positively to economic growth, and bringing additional revenue to landowners. Therefore, further study and investment in R&D is required to link energy crops to the implementation of biorefineries. The main objective of this study is to present a review of the potential of selected energy crops for bioenergy and biofuels production, when cultivated in marginal/degraded/contaminated (MDC) soils (not competing with agriculture), contributing to avoiding Indirect Land Use Change (ILUC) burdens. The selected energy crops are Cynara cardunculus, Arundo donax, Cannabis sativa, Helianthus tuberosus, Linum usitatissimum, Miscanthus × giganteus, Sorghum bicolor, Panicum virgatum, Acacia dealbata, Pinus pinaster, Paulownia tomentosa, Populus alba, Populus nigra, Salix viminalis, and microalgae cultures. This article is useful for researchers or entrepreneurs who want to know what kind of crops can produce which biofuels in MDC soils.

Lignin removal improves xylooligosaccharides production from poplar by acetic acid hydrolysis

Organic acid hydrolysis is a potential method for xylooligosaccharides (XOS) production from lignocelluloses. However, the effect of lignin content on XOS production using organic acid hydrolysis remains unclear. In this work, the effect of delignification on XOS production from poplar by acetic acid (AC) hydrolysis was investigated. Hydrogen peroxide-acetic acid (HPAC) pretreatment catalyzed by 0-200 mM H₂SO₄ (HPAC0-HPAC200) removed 21.6-86.5% of lignin in poplar. HPAC pretreatment increased the xylan accessibility to AC solution, thus increasing the xylan removal during AC hydrolysis. An appropriate delignification (61.7%) resulted in the highest XOS yield of 37.4% by AC hydrolysis, increased by 29.9% compared to the optimal XOS yield (28.8%) from raw poplar. After alkaline post-incubation, the glucose yield of poplar residue rose from 57.1% to 78.6%. This work developed a delignification process to efficiently improve XOS and monosaccharides production from poplar.

Investigation of hydrogen peroxide-acetic acid pretreatment to enhance the enzymatic digestibility of bamboo residues

Bamboo biomass was widely considered as a promising substitute for lignocellulose to produce fermentable sugars and biofuels in the south of China. When P. amarus were treated using hydrogen peroxide and acetic Acid pretreatment in the presence of sulphuric acid at 60 ℃ for 2 h, 82.63% lignin was removed from the bamboo residue, and enzymatic saccharification yield of 79.3% and ethanol content of 13.31 g/L were obtained. Analysis indicated that HPAC pretreatment increased the hydrophilic and porous nature of substrate, which can improve the enzyme accessibility to cellulose. When HPAC-pretreated D. sinicus, B. lapidea, N. affinis, andD. giganteus were used as the substrates of enzymatic saccharification, glucose yields of 71-84% at 72 h were achieved. HPAC pretreatment was a highly efficient and environmentally friendly method for bamboo biorefinery in the south of China.

Delignification of poplar for xylo-oligosaccharides production using lactic acid catalysis

Recently, xylo-oligosaccharides (XOS) production from lignocelluloses by organic acid catalysis has been widely reported. However, the effect of delignification of lignocelluloses on XOS production by organic acid catalysis was unclear, and lactic acid (LA) catalysis in XOS production from lignocelluloses has not been reported. In this work, the effect of delignification on XOS production from poplar by LA catalysis was investigated. Results demonstrated that hydrogen peroxide-acetic acid (HPAA) pretreatment removed 83.2% of lignin and retained 95.4% of xylan. After 2% LA catalysis (170 °C, 30 min), a high XOS yield of 42.7% was obtained from HPAA₁-LA-pretreated poplar. Lignin removal from poplar was positively correlated with XOS yield. Glucose yield of HPAA₁-LA-pretreated poplar by cellulase was 88.9%. Compared with LA-catalyzed poplar, the XOS and glucose production from HPAA₁-LA-pretreated poplar by cellulase increased by 1.4-fold and 6.8-fold, respectively. This work presents a novel strategy for efficient producing XOS and monosaccharides from poplar.

Alkaline post-incubation improves the saccharification of poplar after hydrogen peroxide-acetic acid pretreatment

BACKGROUND

Hydrogen peroxide-acetic acid (HPAA) is widely used in pretreatment of lignocellulose because it has a good capability in selective delignification. However, high concentration (more than 60%) of HPAA increases the cost of pretreatment and the risk of explosion. In this work, alkaline post-incubation was employed to decrease the HPAA loading and improve the saccharification of poplar.

RESULTS

Pretreatment with 100% HPAA removed 91.0% lignin and retained 89.9% glucan in poplar. After poplar was pretreated by 100% HPAA at 60 °C for 2 h, the glucan conversion in enzymatic hydrolysis by cellulase increased to 90.1%. Alkaline incubation reduced the total lignin, surface lignin, and acetyl group of HPAA-pretreated poplar. More than 92% acetyl groups of HPAA-pretreated poplar were removed by alkaline incubation with 1.0% NaOH at 50 °C for 1 h. After incubation of 60% HPAA-pretreated poplar with 1.0% NaOH, the glucan conversion enhanced to 95.0%. About 40% HPAA loading in pretreatment was reduced by alkaline incubation without the decrease of glucose yield.

CONCLUSIONS

Alkaline post-incubation had strong ability on the deacetylation and delignification of HPAA-pretreated poplar, exhibiting a strong promotion on the enzymatic hydrolysis yield. This report represented alkaline incubation reduced the HPAA loading, improved pretreatment safety, exhibiting excellent potential application in saccharification of poplar.

Effect of sulfuric acid on production of xylooligosaccharides and monosaccharides from hydrogen peroxide-acetic acid-pretreated poplar

Lignin is one of the main obstacles for enzymatic hydrolysis, which can be selectively removed by hydrogen peroxide-acetic acid pretreatment (HPAC). In this work, the effects of sulfuric acid concentration on chemical composition, structural features, physical properties and enzymatic digestibility of HPAC pretreated poplar were investigated. The increased H₂SO₄ dosage enhanced the lignin removal of HPAC-pretreated poplar, resulting in the increased accessibility and decreased hydrophobicity. A satisfying glucose yield (91.84%) was obtained from HPAC pretreated poplar (100 mM H₂SO₄) at 5 FPU/g DM of cellulase loading with the addition of xylanase (30 U/g DM) and Tween 80 (3 g/L). The increment of H₂SO₄ concentration promoted the yield of xylooligosaccharides from 0.69% to 20.45% and monosaccharides from 5.76% to 92.89% respectively by two-step enzymatic hydrolysis. This work demonstrated that HPAC pretreatment played a critical role in efficient utilization of poplar carbohydrates by enzymatic hydrolysis.

Functional MYB transcription factor gene HtMYB2 is associated with anthocyanin biosynthesis in Helianthus tuberosus L

BACKGROUND

Tuber color is an important trait for Helianthus tuberosus L. (Jerusalem artichoke). Usually, purple tubers with high anthocyanin content are more nutritious than white tuber. But, the molecular mechanism underlying it is unknown.

RESULTS

In the current study, high-throughput RNA-sequencing was used to compare the transcriptomes between plants with tubers with red or white epidermis. Compared with the white-skinned tubers of cultivar QY3, anthocyanin biosynthesis structural genes had greater expression in the red-skinned tubers of cultivar QY1, indicating that the anthocyanin biosynthesis pathway was activated in 'QY1'; quantitative PCR confirmed this difference in expression. HtMYB2 (Unigene44371_All) was the only MYB transcription factor, homologous to the MYB transcription factor regulating anthocyanin biosynthesis, expressed in the red tuber epidermis of 'QY1'. The anthocyanin concentration in the root, stem, leaf, flower, and tuber epidermis of 'QY1' was higher than in 'QY3', especially tuber epidermis. Correspondingly, HtMYB2 had greater expression in these tissues of 'QY1' than in 'QY3'. The expression of HtMYB2 was associated with anthocyanin accumulation in the different tissues. Overexpression of HtMYB2 activated the anthocyanin biosynthesis pathway, accumulating the pigment in leaves of transgenic tobacco, supporting the model that HtMYB2 regulated anthocyanin biosynthesis. Further experiments found that HtMYB2 had the same coding sequence and genomic sequence in 'QY1' and 'QY3', but that there were several single nucleotide polymorphisms and one insertion-deletion (indel) mutation of 21 nucleotides in the promoter region between the two alleles. The deletion of three nucleotides "AAA" made the promoter of 'QY1' predicted to contain one more possible promoter region. A specific primer, based on the indel, could differentiate between cultivars with red or white tuber epidermis. The genetic variation in HtMYB2 was associated with the tuber skin color in a natural population.

CONCLUSIONS

RNA-seq can successfully isolate the candidate gene (HTMYB2) controlling anthocyanin biosynthesis in purple epidermis of Jerusalem artichoke tuber. HTMYB2 can regulate anthocyanin biosynthesis in plants and is closely related to the formation of purple phenotype in tubers. This study should be useful in understanding the genetic mechanism underlying different tuber skin colors and in breeding new H. tuberosus cultivars with different tuber skin colors.

Two-Stage Pretreatment to Improve Saccharification of Oat Straw and Jerusalem Artichoke Biomass

Pretreatment is a necessary step when lignocellulosic biomass is to be converted to simple sugars; however single-stage pretreatment is often insufficient to guarantee full availability of polymeric sugars from raw material to hydrolyzing enzymes. In this work, the two-stage pretreatment with use of acid (H2SO4, HNO3) and alkali (NaOH) was applied in order to increase the susceptibility of Jerusalem artichoke stalks (JAS) and oat straw (OS) biomass on the enzymatic attack. The effect of the concentration of reagents (2% and 5% w/v) and the order of acid and alkali sequence on the composition of remaining solids and the efficiency of enzymatic hydrolysis was evaluated. It was found that after combined pretreatment process, due to the removal of hemicellulose and lignin, the content of cellulose in pretreated biomass increased to a large extent, reaching almost 90% d.m. and 95% d.m., in the case of JAS and OS, respectively. The enzymatic hydrolysis of solids remaining after pretreatment resulted in the formation of up to 45 g/L of glucose, for both JAS and OS. The highest glucose yield was achieved after pretreatment with 5% nitric acid followed by NaOH, and 90.6% and 97.6% of efficiency were obtained, respectively for JAS and OS.

Production of xylooligosaccharides and monosaccharides from poplar by a two-step acetic acid and peroxide/acetic acid pretreatment

BACKGROUND

Populus (poplar) tree species including hybrid varieties are considered as promising biomass feedstock for biofuels and biochemicals production due to their fast growing, short vegetative cycle, and widely distribution. In this work, poplar was pretreated with acetic acid (AC) to produce xylooligosaccharides (XOS), and hydrogen peroxide-acetic acid (HPAC) was used to remove residual lignin in AC-pretreated poplar for enzymatic hydrolysis. The aim of this work is to produce XOS and monosaccharides from poplar by a two-step pretreatment method.

RESULTS

The optimal conditions for the AC pretreatment were 170 °C, 5% AC, and 30 min, giving a XOS yield of 55.8%. The optimal HPAC pretreatment conditions were 60 °C, 2 h, and 80% HPAC, resulting in 92.7% delignification and 87.8% cellulose retention in the AC-pretreated poplar. The two step-treated poplar presented 86.6% glucose yield and 89.0% xylose yield by enzymatic hydrolysis with a cellulases loading of 7.2 m/g dry mass. Very high glucose (93.8%) and xylose (94.6%) yields were obtained with 14.3 mg cellulases/g dry mass. Both Tween 80 and β-glucosidase enhanced glucose yield of HPAC-pretreated poplar by alleviating the accumulation of cellobiose. Under the optimal conditions, 6.9 g XOS, 40.3 g glucose, and 8.9 g xylose were produced from 100 g poplar.

CONCLUSIONS

The AC and HPAC pretreatment of poplar represented an efficient strategy to produce XOS and fermentable sugars with high yields. This two-step pretreatment was a recyclable benign and advantageous scheme for biorefinery of the poplar into XOS and monosaccharides.

An NIRS-based assay of chemical composition and biomass digestibility for rapid selection of Jerusalem artichoke clones

BACKGROUND

High-throughput evaluation of lignocellulosic biomass feedstock quality is the key to the successful commercialization of bioethanol production. Currently, wet chemical methods for the determination of chemical composition and biomass digestibility are expensive and time-consuming, thus hindering comprehensive feedstock quality assessments based on these biomass specifications. To find the ideal bioethanol feedstock, we perform a near-infrared spectroscopic (NIRS) assay to rapidly and comprehensively analyze the chemical composition and biomass digestibility of 59 Jerusalem artichoke (Helianthus tuberosus L., abbreviated JA) clones collected from 24 provinces in six regions of China.

RESULTS

The distinct geographical distribution of JA accessions generated varied chemical composition as well as related biomass digestibility (after soluble sugars extraction and mild alkali pretreatment). Notably, the soluble sugars, cellulose, hemicellulose, lignin, ash, and released hexoses, pentoses, and total carbohydrates were rapidly and perfectly predicted by partial least squares regression coupled with model population analyses (MPA), which exhibited significantly higher predictive performance than controls. Subsequently, grey relational grade analysis was employed to correlate chemical composition and biomass digestibility with feedstock quality score (FQS), resulting in the assignment of tested JA clones to five feedstock quality grades (FQGs). Ultimately, the FQGs of JA clones were successfully classified using partial least squares-discriminant analysis model coupled with MPA, attaining a significantly higher correct rate of 97.8% in the calibration subset and 91.1% in the validation subset.

CONCLUSIONS

Based on the diversity of JA clones, the present study has not only rapidly and precisely examined the biomass composition and digestibility with MPA-optimized NIRS models but has also selected the ideal JA clones according to FQS. This method provides a new insight into the selection of ideal bioethanol feedstock for high-efficiency bioethanol production.

Nitric Acid Pretreatment of Jerusalem Artichoke Stalks for Enzymatic Saccharification and Bioethanol Production

This paper evaluated the effectiveness of nitric acid pretreatment on the hydrolysis and subsequent fermentation of Jerusalem artichoke stalks (JAS). Jerusalem artichoke is considered a potential candidate for producing bioethanol due to its low soil and climate requirements, and high biomass yield. However, its stalks have a complexed lignocellulosic structure, so appropriate pretreatment is necessary prior to enzymatic hydrolysis, to enhance the amount of sugar that can be obtained. Nitric acid is a promising catalyst for the pretreatment of lignocellulosic biomass due to the high efficiency with which it removes hemicelluloses. Nitric acid was found to be the most effective catalyst of JAS biomass. A higher concentration of glucose and ethanol was achieved after hydrolysis and fermentation of 5% (w/v) HNO3-pretreated JAS, leading to 38.5 g/L of glucose after saccharification, which corresponds to 89% of theoretical enzymatic hydrolysis yield, and 9.5 g/L of ethanol. However, after fermentation there was still a significant amount of glucose in the medium. In comparison to more commonly used acids (H2SO4 and HCl) and alkalis (NaOH and KOH), glucose yield (% of theoretical yield) was approximately 47–74% higher with HNO3. The fermentation of 5% nitric-acid pretreated hydrolysates with the absence of solid residues, led to an increase in ethanol yield by almost 30%, reaching 77–82% of theoretical yield.

Improved ethanol production at high temperature by consolidated bioprocessing using Saccharomyces cerevisiae strain engineered with artificial zinc finger protein

In this work, the consolidated bioprocessing (CBP) yeast Saccharomyces cerevisiae MNII/cocδBEC3 was transformed by an artificial zinc finger protein (AZFP) library to improve its thermal tolerance, and the strain MNII-AZFP with superior growth at 42°C was selected. Improved degradation of acid swollen cellulose by 45.9% led to an increase in ethanol production, when compared to the control strain. Moreover, the fermentation of Jerusalem artichoke stalk (JAS) by MNII-AZFP was shortened by 12h at 42°C with a concomitant improvement in ethanol production. Comparative transcriptomics analysis suggested that the AZFP in the mutant exerted beneficial effect by modulating the expression of multiple functional genes. These results provide a feasible strategy for efficient ethanol production from JAS and other cellulosic biomass through CBP based-fermentation at elevated temperatures.

Development of an integrated process to produce d-mannose and bioethanol from coffee residue waste

A novel, integrated process for economical high-yield production of d-mannose and ethanol from coffee residue waste (CRW), which is abundant and widely available, was reported. The process involves pretreatment, enzymatic hydrolysis, fermentation, color removal, and pervaporation, which can be performed using environmentally friendly technologies. The CRW was pretreated with ethanol at high temperature and then hydrolyzed with enzymes produced in-house to yield sugars. Key points of the process are: manipulations of the fermentation step that allowing bioethanol-producing yeasts to use almost glucose and galactose to produce ethanol, while retaining large amounts of d-mannose in the fermented broth; removal of colored compounds and other components from the fermented broth; and separation of ethanol and d-mannose through pervaporation. Under optimized conditions, approximately 15.7g dry weight (DW) of d-mannose (approximately 46% of the mannose) and approximately 11.3g DW of ethanol from 150g DW of ethanol-pretreated CRW, were recovered.

Simultaneous production of bioethanol and value-added d-psicose from Jerusalem artichoke (Helianthus tuberosus L.) tubers

In this study, the production of bioethanol and value added d-psicose from Jerusalem artichoke (JA) was attempted by an enzymatic method. An enzyme mixture used for hydrolysis of 100mgmL^-1 JA. The resulting concentrations of released d-fructose and d-glucose were measured at approximately 56mgmL^-1 and 15mgmL^-1, respectively. The d-psicose was epimerized from the JA hydrolyzate, and the conversion rate was calculated to be 32.1%. The residual fructose was further converted into ethanol at 18.0gL^-1 and the yield was approximately 72%. Bioethanol and d-psicose were separated by pervaporation. This is the first study to report simultaneous d-psicose production and bioethanol fermentation from JA.

Comparison of red microalgae (Porphyridium cruentum) culture conditions for bioethanol production

Microalgae biomass are useful resources in biofuel production. The objective of this study was to evaluate bioethanol production in response to Porphyridium cruemtum culture conditions. Enzymatic hydrolysis of seawater P. cruemtum (SPC) and freshwater P. cruemtum (FPC, 1% substrate loading, w/v) resulted in glucose conversion yields of 89.8 and 85.3%, respectively, without any pretreatment. However, FPC hydrolysate was more efficiently converted to ethanol about 7.1% than SPC hydrolysate. The comparison of separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF) showed that SSF processing is a superior method for bioethanol production from both SPC and FPC. Though SSF processing (5% substrate loading, w/v) in a 500-mL twin-neck round bottom flask, we achieved ethanol conversion yields of 65.4 and 70.3% from SPC and FPC, respectively, after 9h. These findings indicate that P. cruemtum can grow in freshwater conditions and is an efficient candidate for bioethanol production.

Evaluation of biomass quality in short-rotation bamboo (Phyllostachys pubescens) for bioenergy products

BACKGROUND

In order to improve the availability of biomass, the concept of growing high yield biomass with short rotations and intensive culture has been introduced. Bamboo has become a feedstock of potential interest for future energy production due to its high productivity and short rotation time. The growth age of biomass is an important factor affecting the efficiency of bioconversion and pretreatment for bioenergy production. In this regard, more information is required on the morphology and chemical composition of bamboo for short-rotation biomass production. In this study, we used a compositional assay to compare a bamboo of two different growth ages.

RESULTS

Bamboo of two different ages showed characteristics patterns of morphology, chemical composition, and bioconversion. In young-age (2-month-old) bamboo, the pattern of tissue organization was similar to that of old-age (3-year-old) bamboo, indicating that the former had reached its full height. There were significant differences between young-age and old-age bamboo in terms of chemical composition. The glucose contents in old-age bamboo did not differ significantly among its internodes. For young-age bamboo, the lignin contents were 14.6-18.3%, whereas those of old-age bamboo were considerably higher, ranging from 25.4 to 27.1% with increasing syringyl-to-guaiacyl ratio. The yield of total sugars following enzymatic hydrolysis of young-age bamboo was approximately eight times. However, following hydrogen peroxide-acetic acid pretreatment, the results of separate hydrolysis and fermentation and simultaneous saccharification and fermentation did not differ significantly between young- and old-age bamboo. However, ethanol production was higher in 2-month old than in 3-year old from initial raw biomass.

CONCLUSION

Our data show that the production of total sugar from raw material was high in young bamboo with low lignin content. With respect to short-rotation biomass, bamboo culm harvested after termination of height growth is more appropriate for use as a biomass resource to achieve a high yield for bioconversion process.

"Bligh and Dyer" and Folch Methods for Solid-Liquid-Liquid Extraction of Lipids from Microorganisms. Comprehension of Solvatation Mechanisms and towards Substitution with Alternative Solvents

Bligh and Dyer (B & D) or Folch procedures for the extraction and separation of lipids from microorganisms and biological tissues using chloroform/methanol/water have been used tens of thousands of times and are "gold standards" for the analysis of extracted lipids. Based on the Conductor-like Screening MOdel for realistic Solvatation (COSMO-RS), we select ethanol and ethyl acetate as being potentially suitable for the substitution of methanol and chloroform. We confirm this by performing solid-liquid extraction of yeast (Yarrowia lipolytica IFP29) and subsequent liquid-liquid partition-the two steps of routine extraction. For this purpose, we consider similar points in the ternary phase diagrams of water/methanol/chloroform and water/ethanol/ethyl acetate, both in the monophasic mixtures and in the liquid-liquid miscibility gap. Based on high performance thin-layer chromatography (HPTLC) to obtain the distribution of lipids classes, and gas chromatography coupled with a flame ionisation detector (GC/FID) to obtain fatty acid profiles, this greener solvents pair is found to be almost as effective as the classic methanol-chloroform couple in terms of efficiency and selectivity of lipids and non-lipid material. Moreover, using these bio-sourced solvents as an alternative system is shown to be as effective as the classical system in terms of the yield of lipids extracted from microorganism tissues, independently of their apparent hydrophilicity.

Strategy for dual production of bioethanol and d-psicose as value-added products from cruciferous vegetable residue

In this study, fermentable sugars and d-fructose were produced from cruciferous vegetable residue by enzymatic method without the use of either chemical or mechanical mechanisms. Production of d-psicose was effectively converted from hydrolyzed d-fructose in cabbage residue by d-psicose-3 epimerase; the presence of the borate increased the conversion rate by about two fold, and ethanol production yield was 85.7% of the theoretical yield. Both products, bioethanol and d-psicose, were successfully separated and purified by pervaporation and cation exchange chromatography, and their recovery yields were approximately 87% and 86.2%, respectively.