Sodium chloride concentration determines exoelectrogens in anode biofilms occurring from mangrove-grown brackish sediment

Evolution and interaction of microbial communities in mangrove microbial fuel cells and first description of Shewanella fodinae as electroactive bacterium

Understanding exoelectrogenic bacteria mechanisms and their interactions in complex biofilm is critical for the development of microbial fuel cells (MFCs). In this article, assumptions concerning the benefits of the complex sediment microbial community for electricity production were explored with both the complex microbial community and isolates identified as Shewanella. Analysis of the microbial community revealed a strong influence of the sediment community on anodes and electrolytes compared to that of only water. Moreover, while Pelobacteraceae-related genera were dominant in our MFCs instead of Desulfuromonas and Geobacter as usually reported, the electroactive Shewanella algae and Shewanella fodinae were isolated and cultivated from the anodic biofilm. S. fodinae, described for the first time as an electroactive bacterium to the best of our knowledge, led to a maximal current density of 3.6 A/m² set as 0.3 V/SCE in a three-electrode set-up fed with lactate. S. algae, in a complex medium containing several available substrates, showed several preferential oxidative behaviors including a diauxic behavior. In pure culture and under our conditions, S. fodinae and S. algae were not able to use acetate as a sole electron donor. However, their presence in our acetate-fed MFCs and the adaptive behavior of S. algae hint a syntrophic interaction between the bacteria to optimize the use of the substrate in a complex environment.

Use of Microbial Fuel Cells for the Treatment of Residue Effluents Discharged from an Anaerobic Digester Treating Food Wastes

One of practical challenges in anaerobic-digestion (AD) technology is the cost-effective treatment of residue effluents containing high concentrations of organics, nitrogen and phosphorus (CNP). In order to evaluate the utility of microbial fuel cells (MFCs) for treating anaerobic-digester effluents (ADEs) and generating power from them, laboratory-scale single-chamber MFCs were filled with ADE obtained from a commercial AD plant treating food wastes and thereafter operated by routinely supplying ADE at different hydraulic residence times (HRTs, 5 to 20 days). It is shown that MFCs were able to reduce not only organics in ADE but also nitrogen and phosphorus. For instance, data demonstrated that over 50% of CNP was removed in MFCs operated at an HRT of 10 days, at which the maximum power density reached over 200 mW m−2 (based on the projected area of anode). Metabarcoding of 16S rRNA genes showed that some bacteria were specifically enriched in anode biofilms, suggesting their involvement in power generation. Our study suggests that MFCs are applicable to reducing CNP in ADEs at reasonable rates, and provides subsequent work with fundamental data useful for setting targets for further developments.

Exploration of Bioinformatics on Microbial Fuel Cell Technology: Trends, Challenges, and Future Prospects

Microbial fuel cells (MFCs) are a cost-effective and environmentally friendly alternative energy method. MFC technology has gained much interest in recent decades owing to its effectiveness in remediating wastewater and generating bioelectricity. The microbial fuel cell generates energy mainlybecause of oxidation-reduction reactions. In this reaction, electrons were transferred between two reactants. Bioinformatics is expanding across a wide range of microbial fuel cell technology. Electroactive species in the microbial community were evaluated using bioinformatics methodologies in whole genome sequencing, RNA sequencing, transcriptomics, metagenomics, and phylogenetics. Technology advancements in microbial fuel cells primarily produce power from organic and inorganic waste from various sources. Reduced chemical oxygen demand and waste degradation are two added advantages for microbial fuel cells. From plants, bacteria, and algae, microbial fuel cells were developed. Due to the rapid advancement of sequencing techniques, bioinformatics approaches are currently widely used in the technology of microbial fuel cells. In addition, they play an important role in determining the composition of electroactive species in microorganisms. The metabolic pathway is also possible to determine with bioinformatics resources. A computational technique that reveals the nature of the mediators and the substrate was also used to predict the electrochemical properties. Computational strategies were used to tackle significant challenges in experimental procedures, such as optimization and understanding microbiological systems. The main focus of this review is on utilizing bioinformatics techniques to improve microbial fuel cell technology.

Hypersaline microbial fuel cell equipped with an oxygen-reducing microbial cathode

Microbial anodes and oxygen reducing microbial cathodes were designed separately under constant polarization at + 0.1 V/SCE in a hypersaline medium (NaCl 45 g/L). They were then associated to design two-compartment microbial fuel cells (MFCs). These MFCs produced up to 209 ± 24 mW m^-2 during a week. This was the first demonstration that hypersaline MFCs equipped with microbial cathodes can produce power density at this level. Desulfuromonas sp. were confirmed to be key species of the anodes. The efficiency of the cathodes was linked to the development of a redox system centred at + 0.2 V/SCE and to the presence of Gammaproteobacteria (Alteromonadales and Oceanospirillales), especially an unclassified order phylogenetically linked to the genus Thioalobacter. Comparing the different performance of the four MFCs with the population analyses suggested that polarization at + 0.1 V/SCE should be maintained longer to promote the growth of Thioalobacter on the cathode and thus increase the MFC performance.

Enrichment of Clostridia enhances Geobacter population and electron harvesting in a complex electroactive biofilm

Current research on microbial fuel cell or microbial electrolysis cell dealt with finding new electroactive bacteria and understanding the mechanisms of electronic exchange. Complex consortia allowed to obtain better performances than pure cultures in part thanks to inter-species cooperation. However, the role of each bacterium in a complex biofilm in the electron harvest on an electrode remains unclear. Thus, we combined electrochemical monitoring of electron exchange and high throughput sequencing analysis in order to describe the bacterial composition and the electroactive performance of mangrove mud biofilms. In this study, secondary electroactive biofilms were formed on carbon electrodes from Desulfuromonas-dominated inoculum of pre-formed bioanodes. The performances and the Desulfuromonas-dominated profile were the same as those of primary bioanodes when the planktonic community was conserved. However, a Clostridium enrichment allowed to restore the performance in maximal current densities promoting an increase of Geobacter population, becoming the most dominant group among the Deltaproteobacteria, replacing Desulfuromonas. These results highlight a positive collaboration between Clostridium and Geobacter spp. helping a bacterial population to achieve with the depletion of their environment. Our study provides new insight into relationships between dominant electroactive bacteria and other bacteria species living in an organic matter-rich environment as mangrove sediments.

Substrate salinity: A critical factor regulating the performance of microbial fuel cells, a review

Substrate salinity is a critical factor influencing microbial fuel cells (MFCs) performance and various studies have suggested that increasing substrate salinity first improves MFC performance. However, a further increase in salinity that exceeds the salinity tolerance of exoelectrogens shows negative effects because of inhibited bacterial activity and increased activation losses. In this review, electricity generation and contaminant removal from saline substrates using MFCs are summarized, and results show different optimal salinities for obtaining maximum performance. Then, electroactive bacteria capable of tolerating saline environments and strategies for improving salinity tolerance are discussed. In addition to ohmic resistance and bacterial activity, membrane resistance and catalyst performance will also be affected by substrate salinity, all of which jointly contribute the final overall MFC performance. Therefore, the combined effect of salinity is analyzed to illustrate how the MFC performance changes with increasing salinity. Finally, the challenges and perspectives of MFCs operated in saline environments are discussed.

The effect of additional salinity on performance of a phosphate buffer saline buffered three-electrode bioelectrochemical system inoculated with wastewater

In bioelectrochemical system (BES), phosphate buffer saline (PBS) is usually used to achieve a suitable pH condition, which also increases electrolyte salinity. A series of factors that change with salinity will affect BES performance. To simplify the scenario, a three-electrode BES is used to investigate how additional salinity affects the performance of a 50 mM PBS-buffered BES. Results demonstrated that current production decreased with increasing salinity and the dominant exoelectrogens were not inhibited with the addition of 200 mM NaCl. The distribution of system resistance was analyzed by electrochemical impedance spectroscopy. Compared to the decreased solution and biofilm resistance, the increased interfacial resistance that accounted for up to 97.8% of total resistance was the dominant reason for the decreased current production with the increasing additional salinity. The effects of additional salinity on acetate degradation and columbic efficiency were also analyzed.

Shewanella algae Relatives Capable of Generating Electricity from Acetate Contribute to Coastal-Sediment Microbial Fuel Cells Treating Complex Organic Matter

To identify exoelectrogens involved in the generation of electricity from complex organic matter in coastal sediment (CS) microbial fuel cells (MFCs), MFCs were inoculated with CS obtained from tidal flats and estuaries in the Tokyo bay and supplemented with starch, peptone, and fish extract as substrates. Power output was dependent on the CS used as inocula and ranged between 100 and 600 mW m^–2 (based on the projected area of the anode). Analyses of anode microbiomes using 16S rRNA gene amplicons revealed that the read abundance of some bacteria, including those related to Shewanella algae, positively correlated with power outputs from MFCs. Some fermentative bacteria were also detected as major populations in anode microbiomes. A bacterial strain related to S. algae was isolated from MFC using an electrode plate-culture device, and pure-culture experiments demonstrated that this strain exhibited the ability to generate electricity from organic acids, including acetate. These results suggest that acetate-oxidizing S. algae relatives generate electricity from fermentation products in CS-MFCs that decompose complex organic matter.

Global regulator engineering enhances bioelectricity generation in Pseudomonas aeruginosa-inoculated MFCs

The electricigens with high-electroactivity is essential for resolving the low electricity power output (EPT) of microbial fuel cells (MFCs). However, the manipulation by single functional genes shows limitation because electroactivity is a complex phenotype controlled by multiple genes. Herein, global regulator engineering (GRE) was developed to optimize the electroactivity of an isolated strain (Pseudomonas aeruginosa P3-A-11) using an exogenous global regulator IrrE (ionizing radiation resistance E linkage group) as an object. The GRE was implemented through in vitro random mutagenesis by error-prone PCR and in vivo high-through screening comprised of cultures color assay, PYO measurement and MFCs operation. Four mutants with higher electroactivity were obtained, among which, the mutant 11/M2-59 not only displayed the maximal power density, but also exhibited stronger salt tolerance, consequently showing good performance of MFCs in the presence of salt. Apart from the reduced internal resistance, the increase in phenazines amounts primarily contributed to EPT improvement, which was realized by enhancing the core biosynthesis pathway and affecting other pathways (such as central metabolism pathway, quorum sensing system, regulatory network). Notably, IrrE exerted its positive effect on electroactivity even without native regulators (such as PmpR and RpoS). In addition, the significant fluctuations in expression levels of stress-responsive genes mediated by GRE were closely associated with the enhanced salt tolerance. This work demonstrated that GRE was an effective approach for simultaneously optimizing multiple phenotypes (such as electroactivity and stress tolerance), and thus would provide more opportunities to create high-efficiency electricigens and further promoted the practical application of MFCs.

Metagenomic insights into the ecology and physiology of microbes in bioelectrochemical systems

In bioelectrochemical systems (BESs), electrons are transferred between electrochemically active microbes (EAMs) and conductive materials, such as electrodes, via extracellular electron transfer (EET) pathways, and electrons thus transferred stimulate intracellular catabolic reactions. Catabolic and EET pathways have extensively been studied for several model EAMs, such as Shewanella oneidensis MR-1 and Geobacter sulfurreducens PCA, whereas it is also important to understand the ecophysiology of EAMs in naturally occurring microbiomes, such as those in anode biofilms in microbial fuel cells treating wastewater. Recent studies have exploited metagenomics and metatranscriptomics (meta-omics) approaches to characterize EAMs in BES-associated microbiomes. Here we review recent BES studies that used meta-omics approaches and show that these studies have discovered unexpected features of EAMs and deepened our understanding of functions and behaviors of microbes in BESs. It is desired that more studies will employ meta-omics approaches for advancing our knowledge on microbes in BESs.

Halophilic starch degrading bacteria isolated from Sambhar Lake, India, as potential anode catalyst in microbial fuel cell: A promising process for saline water treatment

In this study, Microbial Fuel Cell (MFC) capable of treating saline starch water was developed. Sodium chloride (NaCl) concentrations ranging from 500 mM to 3000 mM were tested at the anode. Nitrate was used as an electron acceptor at the biocathode. The halophilic bacteria were isolated from Sambhar Lake, India. Results indicated successful removal of starch (1.83 kg/m³-d) and nitrate (0.13 kg/m³-d NO₃^--N) with concomitant power output of 207.05 mW/m² at 1000 mM NaCl concentration. An increase in power density from 71.06 mW/m² to 207.05 mW/m² (2.92 folds) was observed when NaCl concentration was increased from 500 mM to 1000 mM. A decline in power density was observed when the salt concentrations >1000 mM were used. Concentration of 3000 mM supported power output as well as the highest starch degradation (3.2 kg/m³-d) and amylase activity of 2.26 IU/ml. The halophilic exoelectrogens were isolated and identified. The present study demonstrates the utility of MFC for degrading starch in saline water.

Microbial fuel cells in saline and hypersaline environments: Advancements, challenges and future perspectives

This review is aimed to report the possibility to utilize microbial fuel cells for the treatment of saline and hypersaline solutions. An introduction to the issues related with the biological treatment of saline and hypersaline wastewater is reported, discussing the limitation that characterizes classical aerobic and anaerobic digestions. The microbial fuel cell (MFC) technology, and the possibility to be applied in the presence of high salinity, is discussed before reviewing the most recent advancements in the development of MFCs operating in saline and hypersaline conditions, with their different and interesting applications. Specifically, the research performed in the last 5years will be the main focus of this review. Finally, the future perspectives for this technology, together with the most urgent research needs, are presented.

Poly iron sulfate flocculant as an effective additive for improving the performance of microbial fuel cells

Laboratory microbial fuel cells were supplied with artificial wastewater and used to examine how supplementation with poly iron sulfate, an inorganic polymer flocculant widely used in wastewater-treatment plants, affects electricity generation and anode microbiomes. It is shown that poly iron sulfate substantially increases electric outputs from microbial fuel cells. Microbiological analyses show that iron and sulfate separately affect anode microbiomes, and the increase in power output is associated with the increases in bacteria affiliated with the families Geobacteraceae and/or Desulfuromonadaceae. We suggest that poly iron sulfate is an effective additive for increasing the electric output from microbial fuel cells. Other utilities of poly iron sulfate in microbial fuel cells are also discussed.

Electricity generation from rice bran in microbial fuel cells

Background

Rice bran is a by-product of the rice milling process and mostly discarded in Japan. Although many studies have shown that microbial fuel cells (MFCs) are able to generate electricity from organic wastes, limited studies have examined MFCs for generating electricity from rice bran.

Findings

Laboratory-scale single-chamber MFCs were inoculated with paddy field soil and supplied with rice bran for examining electricity generation. Power outputs and microbiome compositions were compared between MFCs containing pure water as the liquid phase (MFC-W) and those containing mineral solution (MFC-M). Polarization analyses showed that both MFCs successfully generated electricity with the maximum power densities of 360 and 520 mW m⁻² (based on the projected area of anode) for MFC-W and MFC-M, respectively. Amplicon-sequencing analyses revealed that Trichococcus and Geobacter specifically occurred in anode biofilms in MFC-W and MFC-M, respectively.

Conclusions

The results suggest that rice bran is a feasible fuel by itself for generating electricity in MFCs.