Conductive and capacitive network for enriching the exoelectrogens and enhancing the extracellular electron transfer in microbial fuel cells

Although lots of nanomaterials modified anodes have been reported to improve the bacterial attachment and extracellular electron transfer (EET) in microbial fuel cells (MFCs), the lack of a three dimensional (3D) conductive and capacitive network severely limited MFCs performance. In this work, 3D conductive networks derived from mucor mycelia were grown on carbon cloth (CC), and capacitive FeMn phosphides/oxides were further anchored on these 3D networks by electrochemical deposition (denoted as FeMn/CMM@CC) to simultaneously address the above challenges. As a result, the multivalent metal active sites were evenly distributed on 3D conductive network, which favored the enrichment of exoelectrogens, mass transport and EET. Consequently, the as-prepared FeMn/CMM@CC anode displayed accumulated charge of 131.4C/m2, higher than bare CC. Meanwhile, FeMn/CMM@CC anode substantially promoted flavin excretion and the amounts of nano conduits. The abundance of Geobacter was 63 % on bare CC, and greatly increased to 83 % on FeMn/CMM@CC. MFCs equipped by FeMn/CMM@CC anode presented the power density of 3.06 W/m2 and coulombic efficiency (29.9 %), evidently higher than bare CC (1.29 W/m2, 7.3 %), and the daily chemical oxygen demand (COD) removal amount also increased to 92.6 mg/L/d. This work developed a facile method to optimize the abiotic-biotic interface by introducing 3D conductive and capacitive network, which was proved to be a promising strategy to modify macro-porous electrodes.

Integrated system of electro-catalytic oxidation and microbial fuel cells for the treatment of recalcitrant wastewater

The emission of recalcitrant wastewater poses serious threats to the environment. In this study, an integrated approach combining electrocatalytic oxidation (EC) for pretreatment and microbial fuel cells (MFC) for thorough pollutant degradation is proposed to ensure efficient degradation of target substances, with low energy input and enhanced bioavailability of refractory organics. When phenol was used as the pollutant, an initial concentration of 2000 mg/L phenol solution underwent EC treatment under constant current-exponential attenuation power supply mode, resulting in a COD removal rate of 54.53%, and a phenol degradation rate of 99.83%. Intermediate products such as hydroquinone and para-diphenol were detected in the solution. After subsequent MFC treatment, only minor amounts of para-diphenol were left, and the degradation rate of phenol and its intermediate products reached 100%, with an output power density of 110.4 mW m-2. When coal chemical wastewater was used as the pollutant, further examination of the EC-MFC system performance showed a COD removal rate of 49.23% in the EC section, and a 76.21% COD removal rate in the MFC section, with an output power density of 181.5 mW m-2. Microbiological analysis revealed typical electrogenic bacteria (such as Pseudomonas and Geobacter), and specific degrading functional bacteria (such as Stenotrophomonas, Delftia, and Brevundimonas). The dominant microbial communities and their proportions adapted to environmental changes in response to the variation of carbon sources.

Development of bioanodes rich in exoelectrogenic bacteria using iron-rich palaeomarine sediment inoculum

Microbial Fuel Cells (MFC) convert energy stored in chemicals into electrical energy thanks to exoelectrogenic microorganisms who also play a crucial role in geochemical cycles in their natural environment, including that of iron. In this study, we investigated paleomarine sediments as inoculum for bioanode development in MFCs. These sediments were formed under anoxic conditions ca. 113 million years ago and are rich in clay minerals, organic matter, and iron. The marlstone inoculum was incubated in the anolyte of an MFC using acetate as the added electron donor and ferricyanide as the electron acceptor in the catholyte. After seven weeks of incubation, the current density increased to 0.15 mA.cm-2 and a stable + 700 mV open circuit potential was reached. Community analysis revealed the presence of two exoelectrogenic bacterial genera, Geovibrio and Geobacter. Development of electroactive biofilms was correlated to bulk chemical transformations of the sediment inoculum with an increase in the Fe(II) to Fetotal ratio. Comparisons to sediments sterilized prior to inoculation confirmed that bioanode development derives from the native microbiota of these paleomarine sediments. This study illustrates the feasibility of developing exoelectrogenic biofilms from iron-rich marlstone and has implications for the role of such bacteria in broader paleoenvironmental phenomena.

Stimulating bioelectric generation and recovery of toxic metals through benthic microbial fuel cell driven by local sago (Cycas revoluta) waste

Benthic microbial fuel cell (BMFC) is the most promising type of bioelectrochemical approach for producing electrons and protons from natural organic waste. In the present work, a single-chamber BMFC was used, containing sago (Cycas revoluta) waste as the organic feed for microorganisms. The local wastewater was supplemented with heavy metal ions (Pb2+, Cd2+, Cr3+, Ni2+, Co2+, Ag+, and Cu2+) and used as an inoculation source to evaluate the performance of BMFC against the toxic metal remediations. According to the experimental results, the maximum power density obtained was 42.55 mW/m2 within 25 days of the BMFC operation. The maximum remediation efficiency of the metal ion removal from the wastewater was found to be 99.30% (Ag+). The conductive pili-type bacteria species (Acinetobacter species, Leucobacter species, Bacillus species, Proteus species. and Klebsiella pneumoniae) were found in the present study during isolation and identification processes. This study's multiple parameter optimization revealed that pH 7 and room temperature is the best condition for optimal performance. Finally, this study included the mechanism, future recommendations, and concluding remarks.

Bioelectrocatalytic reduction by integrating pyrite assisted manganese cobalt-doped carbon nanofiber anode and bacteria for sustainable antimony catalytic removal

A novel manganese cobalt metal-organic framework based carbon nanofiber electrode (MnCo/CNF) was prepared and used as microbial fuel cell (MFC) anode. Pyrite was introduced into the anode chamber (MnCoPy_MFC). Synergistic function between pyrite and MnCo/CNF facilitated the pollutants removal and energy generation in MnCoPy_MFC. MnCoPy_MFC showed the highest chemical oxygen demand removal efficiency (82 ± 1%) and the highest coulombic efficiency (35 ± 1%). MnCoPy_MFC achieved both efficient electricity generation (maximum voltage: 658 mV; maximum power density: 3.2 W/m3) and total antimony (Sb) removal efficiency (99%). The application of MnCo/CNF significantly enhanced the biocatalytic efficiency of MnCoPy_MFC, attributed to its large surface area and abundant porous structure that provided ample attachment sites for electroactive microorganisms. This study revealed the synergistic interaction between pyrite and MnCo/CNF anode, which provided a new strategy for the application of composite anode MFC in heavy metal removal and energy recovery.

Magnetite-equipped algal-rich sediments for microbial fuel cells: Remediation of sediment organic matter pollution and mechanisms of remote electron transfer

Using the bio-electrochemical methods for the restoration of high algae sediments is full of potential and challenges. How to promote extracellular electron transfer (EET) process in microbial fuel cells (MFC) is the key bottleneck. The study had explored the potential application of magnetite on accelerating electron transfer for improving the output of MFC and sediment pollution remediation. The results indicated that the organic matter degradation rate showed a remarkable increase of 27.45 %, and the voltage output was approximately 1.68 times higher compared to the MFC configured with regular sediment. Abundant electroactive bacteria (EABs), such as Geobacter and Burkholderiaceae, and fermentative bacteria were responsible for these results, accompanied by the enhanced fluorescence of humic substances (HS), increased concentration and activity of cytochrome C (25.05 % and 21.12 %), as well as elevated extracellular polymeric substance content. Moreover, the intrinsic EET mechanisms among Fe-oxides, HS, and EABs were explored. According to the electrochemical analysis and substance transformation, the EET process involved four stages: magnetite-enhanced direct electron transfer via strong conductivity, iron respiration mediating electron transfer to the electrode, the model quinone substance acting as an electron shuttle facilitating EET and iron reduction, and iron cycling mediating electron transfer. This study provides an effective strategy for pollution remediation in algal-rich sediment, which was beneficial for the harmless treatment and resource utilization of both algae and sediment, simultaneously.

Enhancement of gaseous chlorobenzene biodegradation and power generation in a microbial fuel cell by bifunctional Acinetobacter sp. HY-99C

The efficient biodegradation of volatile chlorinated hydrocarbons using microbial fuel cells (MFCs) offers a feasible approach for purifying waste gas and alleviating energy crises. However, power generation is limited by poor pollutant biodegradation and slow electron transfer. The bifunctional bacterium Acinetobacter sp. HY-99C was screened and used to improve the performance of a conventional MFC. The inoculation of strain HY-99C into the conventional MFC promoted the formation of a compact biofilm with high metabolic activity and an enriched bifunctional genus (Acinetobacter), which resulted in the accelerated decomposition of chlorinated aromatic compounds into biodegradable organic acids. This led to efficient chlorobenzene removal and power generation from the MFC, with a chlorobenzene elimination capacity of 70.8 g m-3 h-1 and power density of 89.6 mW m-2, which are improved over those of previously reported MFCs. This study provides novel insights into enhancing pollutant removal and power generation in MFCs.

Comparative study of exoelectrogenic utilization preferences and hydrogen conversion among major fermentation products in microbial electrolysis cells

This study comparatively investigated the exoelectrogenic utilization and hydrogen conversion of major dark fermentation products (acetate, propionate, butyrate, lactate, and ethanol) from organic wastes in dual-chamber microbial electrolysis cells (MECs) alongside their mixture as a simulated dark fermentation effluent (DFE). Acetate-fed MECs showed the highest hydrogen yield (1,465 mL/g chemical oxygen demand), near the theoretical maximum yield, with the highest coulombic efficiency (105%) and maximum current density (7.9 A/m2), followed by lactate-fed, propionate-fed, butyrate-fed, mixture-fed, and ethanol-fed MECs. Meanwhile, the highest hydrogen production rate (514 mL/L anolyte∙d) was observed in ethanol-fed MECs despite their lower coulombic efficiency. Butyrate was the least favored substrate, followed by propionate, leading to significantly delayed startup and reaction. The active anodic microbial community structure varied considerably among the MECs utilizing different substrates, particularly between Geobacter and Acetobacterium dominance. The results highlight the substantial effect of the DFE composition on its utilization and current-producing bioanode development.

Tetracycline hydrochloride degradation in polarity inverted microbial fuel cells: Performance, mechanisms and microbiology

Tetracycline antibiotics are widely used in veterinary medicine, human therapy and agriculture, and their presence in natural water raises environmental concerns. In this study, more than 94% of tetracycline hydrochloride (TCH) could be rapidly degraded within 48 h in polarity-inverted microbial fuel cells. The electrochemically active bacteria had the best electrochemical performance at 1 mg/L of TCH with the minimum internal resistance of 77.38 Ω. The electron-rich functional groups of TCH were continuously attacked and finally degradated into small molecules in three possible degradation pathways. Microbial community structure analysis showed that Comamonas and Shinella were enriched at the electrode as polarity-inverted bacteria. Genomic analysis showed that both direct and indirect electron transfer participated in the degradation of TCH in polarity-inverted microbial fuel cell (MFC) and the functional genes related to electrical conductivity in polarity-inverted MFC were more enriched on the electrode surface than non-polarity-inverted MFC. This study can facilitate further investigations about the biodegradation of TCH in polarity-inverted microbial fuel cell.

Performance analysis of microbial fuel cell - membrane bioreactor with reduced graphene oxide enhanced polypyrrole conductive ceramic membrane: Wastewater treatment, membrane fouling and microbial community under high salinity

The application of membrane bioreactor (MBR) in high salinity wastewater treatment was mainly hindered by membrane fouling. Microbial fuel cell (MFC)-MBR coupling system was established to alleviate membrane fouling and save energy. Reduced graphene oxide/polypyrrole ceramic membrane (rGO/PPy CM) with high conductivity and stability was innovatively placed in MFC-MBRs as both cathode and filter, with PPy CM, rGO/PPy CM and CM placed in other reactors. MFC-MBR (rGO/PPy) and MFC-MBR (PPy) achieved higher pollutant removal efficiencies (90.73 % and 90.45 % for TOC, 87.22 % and 86.56 % for NH4+-N, respectively) and superior anti-fouling performance (1.86 and 1.93 kPa/d for average membrane fouling rates) than both conventional MBRs (CMBRs). The stable voltage generation was around 287 and 242 mV, respectively. Through high throughput sequencing, electric field showed a positive correlation with the abundance and activity of most dominant phylum (Bacteroidetes, Chloroflexi, Actinobacteria, and Firmicutes) and functional genes (amoA, hao, narG, napA, nirK, norB, and nosZ), thereby improving pollutant removal efficiency. The higher conductivity of rGO/PPy CM resulted in enhanced electric field intensity, leading to superior performance of anti-fouling and pollutant removal. This study inventively explored the effects of conductive membrane property on electricity generation performance, microbial community, pollutant removal and membrane fouling, providing theoretical support for the selection of electrode materials in MFC-MBR.

Enhancing diversified extracellular electron transfer (EET) processes through N-MXene-modified non-adhesive hydrogel bioanodes

The focus of this study is to develop a high-performance anode material for microbial fuel cells (MFCs). PEDOT:PSS and nitrogen-modified MXene were combined to create a hydrogel composite material called PPNM, which was drop-cast onto carbon felt (CF) as the MFCs anode. The PPNM exhibited a higher peak power density of 4.78 W m-2, an increase of 332% compared to the CF anode. It is worth noting that the PPNM Hydrogel maintains its rough and porous structure, providing favorable sites for bacterial colonization. The introduction of N-MXene has improved the electrochemical performance of the hydrogel, particularly impacting the mediated electron transfer process. Microbial community analysis revealed the presence of more electrochemically active species on the PPNM anode. These findings highlight the potential of PPNM hydrogel and pave the way for similar strategies in achieving high-performance anodes in MFCs.

Effects of municipal waste compost on microbial biodiversity and energy production in terrestrial microbial fuel cells

Microbial Fuel Cells (MFCs) transform organic matter into electricity through microbial electrochemical reactions catalysed on anodic and cathodic half-cells. Terrestrial MFCs (TMFCs) are a bioelectrochemical system for bioelectricity production as well as soil remediation. In TMFCs, the soil is the ion-exchange electrolyte, whereas a biofilm on the anode oxidises organic matter through electroactive bacteria. Little is known of the overall microbial community composition in a TMFC, which impedes complete exploitation of the potential to generate energy in different soil types. In this context, an experiment was performed to reveal the prokaryotic community structure in single chamber TMFCs with soil in the presence and absence of a municipal waste compost (3% w/v). The microbial community was assessed on the anode and cathode and in bulk soil at the end of the experiment (54 days). Moreover, TMFC electrical performance (voltage and power) was also evaluated over the experimental period, varying the external resistance to improve performance. Compost stimulated soil microbial activity, in line with a general increase in voltage and power. Significant differences were observed in the microbial communities between initial soil conditions and TMFCs, and between the anode, cathode and bulk soil in the presence of the compost. Several electroactive genera (Bacillus, Fulvivirga, Burkholdeira and Geobacter) were found at the anode in the presence of compost. Overall, the use of municipal waste compost significantly increased the performance of the MFCs in terms of electrical power and voltage generated, not least thanks to the selective pressure towards electroactive bacteria on the anode.

Algae-Bacteria cooperated microbial ecosystem: A self-circulating semiartificial photosynthetic purifying strategy

The microbial fuel cell (MFC) is a promising bio-electrochemical technology that enables simultaneous electricity generation and effluent purification. Harnessing solar energy to provide sustainable power for MFC operation holds great potential. In this study, a semiartificial photosynthetic self-circulating MFC ecosystem is successfully established through the collaboration of electrogenic microorganisms and photosynthetic algae. The ecosystem can operate continuously without carbon sources and produces a voltage of 150 mV under irradiation. The irradiation doubles the maximum power density of the ecosystem, reaching 8.07 W/m2 compared to dark conditions. The results of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) suggest a higher diffusion capacity or faster electron replenishment ability within the ecosystem. Furthermore, the capacity of ecosystem for removing chromium (Cr(VI)) has been investigated comprehensively. Under irradiation, the ecosystem demonstrates a 2.25-fold increase in Cr(VI) removal rate compared to dark conditions. Finally, the results of 16S rRNA amplicon sequencing indicates an increase in the relative abundance of strict and facultative aerobic electroactive bacteria in the ecosystem, including Citrobacter (21 %), Bacillus (15 %) and Enterococcus (6 %). The ecosystem offers a novel, self-sustaining approach to address the challenges of energy recovery and environmental pollution.

Evaluation of bamboo derived biochar as anode catalyst in microbial fuel cell for xylan degradation utilizing microbial co-culture

This study aimed to examine the microbial degradation of xylan through Bacillus sp. isolated from wastewater. Co-culture of Bacillus licheniformis strain and MTCC-8104 strain of Shewanella putrefaciens were employed in a microbial fuel cell (MFC) to facilitate energy production simultaneous xylan degradation under optimum conditions. Electrochemical properties of MFC and degradation analysis were used to validate xylan degradation throughout various experimental parameters. Degradation of the optimal xylan concentration using co-culture, resulting in a power density of 7.8 W/m3, the anode surface was modified with bamboo-derived biochar in order to increase power density under the same operational condition. Under optimum circumstances, increasing the anode's surface area boosted electron transport and electro-active biofilm growth, resulting in a higher power density of 12.9 W/m3. Co-culture of hydrolyzing and electro-active bacteria was found beneficial for xylan degradation and anode modifications enhance power output while microbial degradation.

Nano-hydroxyapatite/carbon nanotube: An excellent anode modifying material for improving the power output and diclofenac sodium removal of microbial fuel cells

Anode material and surface properties have a crucial impact on the performance of MFCs. Designing and fabricating various modified carbon-based anodes with functional materials is an effective strategy to improve anode performance in MFCs. Anode materials with excellent bioaffinity can promote bacterial attachment, growth, and extracellular electron transfer. In this study, positively charged nano hydroxyapatite (nHA) with remarkable biocompatibility combined with carbon nanotubes (CNTs) with unique structure and high conductivity were used as anode modifying material. The nHA/CNTs modified carbon brush (CB) exhibited improved bacteria adsorption capacity, electrochemical activity and reticular porous structure, thus providing abundant sites and biocompatible microenvironment for the attachment and growth of functional microbial and accelerating extracellular electron transfer. Consequently, the nHA/CNTs/CB-MFCs achieved the maximum power density of 4.50 ± 0.23 mW m-2, which was 1.93 times higher than that of the CB-MFCs. Furthermore, diclofenac sodium (DS), which is a widely used anti-inflammatory drug and is also a persistent toxic organic pollutant constituting a serious threat to public health, was used as the model organic pollutant. After 322 days of long-term operation, enhanced diclofenac sodium removal efficiency and simultaneous bioelectricity generation were realized in nHA/CNTs/CB-MFCs, benefiting from the mature biofilm and the diverse functional microorganisms revealed by microbial community analysis. The nHA/CNTs/CB anode with outstanding bioaffinity, electrochemical activity and porous structure presents great potential for the fabrication of high-performance anodes in MFCs.

In-situ microbial protein production by using nitrogen extracted from multifunctional bio-electrochemical system

Upgrading of waste nitrogen sources is considered as an important approach to promote sustainable development. In this study, a multifunctional bio-electrochemical system with three chambers was established, innovatively achieving 2.02 g/L in-situ microbial protein (MP) production via hydrogen-oxidizing bacteria (HOB) in the protein chamber (middle chamber), along with over 2.9 L CO2/(L·d) consumption rate. Also, 69% chemical oxygen demand was degraded by electrogenic bacteria in the anode chamber, resulting in the 394.67 J/L electricity generation. Focusing on the NH4+-N migration in the system, the current intensity contributed 4%-9% in the anode and protein chamber, whereas, the negative effect of -6.69% on contribution was shown in the cathode chamber. On the view of kinetics, NH4+-N migration in anode and cathode chambers was fitted well with Levenberg-Marquardt equation (R2 > 0.92), along with the well-matched results of HOB growth in the protein chamber based on Gompertz model (R2 > 0.99). Further evaluating MPs produced by HOB, 0.45 g/L essential amino acids was detected, showing the better amino acid profile than fish and soybean. Multifunctional bio-electrochemical system revealed the economic potential of producing 6.69 €/m3 wastewater according to a simplified economic evaluation.

Insights on hexavalent chromium(VI) remediation strategies in abiotic and biotic dual chamber microbial fuel cells: electrochemical, physical, and metagenomics characterizations

Hexavalent chromium [Cr(VI)] is one of the most carcinogenic and mutagenic toxins, and is commonly released into the environemt from different industries, including leather tanning, pulp and paper manufacturing, and metal finishing. This study aimed to investigate the performance of dual chamber microbial fuel cells (DMFCs) equipped with a biocathode as alternative promising remediation approaches for the biological reduction of hexavalent chromium [Cr(VI)] with instantaneous power generation. A succession batch under preliminary diverse concentrations of Cr(VI) (from 5 to 60 mg L-1) was conducted to investigate the reduction mechanism of DMFCs. Compared to abiotic-cathode DMFC, biotic-cathode DMFC exhibited a much higher power density, Cr(VI) reduction, and coulombic efficiency over a wide range of Cr(VI) concentrations (i.e., 5-60 mg L-1). Furthermore, the X-ray photoelectron spectroscopy (XPS) revealed that the chemical functional groups on the surface of biotic cathode DMFC were mainly trivalent chromium (Cr(III)). Additionally, high throughput sequencing showed that the predominant anodic bacterial phyla were Firmicutes, Proteobacteria, and Deinococcota with the dominance of Clostridiumsensu strict 1, Enterobacter, Pseudomonas, Clostridiumsensu strict 11 and Lysinibacillus in the cathodic microbial community. Collectively, our results showed that the Cr(VI) removal occurred through two different mechanisms: biosorption and bioelectrochemical reduction. These findings confirmed that the DMFC could be used as a bioremediation approach for the removal of Cr(VI) commonly found in different industrial wastewater, such as tannery effluents. with simultaneous bioenergy production.

Vanadium nitride decorated carbon cloth anode promotes aniline degradation and electricity generation of MFCs by efficiently enriching electroactive bacteria and promoting extracellular electron transfer

To increase the colonization of electroactive bacteria and accelerate the rate of extracellular electron transfer, a simple coated anode of microbial fuel cell was designed. Here, we took advantage of vanadium nitride (VN) particles to modify the carbon cloth (VN@CC). Compared with bare carbon cloth, the designed VN@CC bioanodes exhibited a larger electrochemically active area, better biocompatibility, and smaller charge transfer impedance. The MFC with VN@CC bioanodes achieved the maximum power density of 3.89 W m-2 and chemical oxygen demand removal rate of 84% when 1000 mg L-1 aniline was degraded, which were about 1.88 and 2.8 times that of CC. The morphology of biofilm and 16s rRNA gene sequence analysis proved that the VN@CC bioanodes facilitated the enrichment of electroactive bacteria (99.02%) and increased the ratio of fast electron transfer in the extracellular electron transfer, thus enhancing the MFC performance of aniline degradation and power output. This work disclosed that it was feasible to increase the overall performance of MFC by enhancing the EET efficiency and presented valuable insights for future work.

The aggregated biofilm dominated by Delftia tsuruhatensis enhances the removal efficiency of 2,4-dichlorophenol in a bioelectrochemical system

Bioelectrochemical system is a prospective strategy in organic-contaminated groundwater treatment, while few studies clearly distinguish the mechanisms of adsorption or biodegradation in this process, especially when dense biofilm is formed. This study employed a single chamber microbial electrolysis cell (MEC) with two three-dimensional electrodes for removing a typical organic contaminant, 2,4-dichlorophenol (DCP) from groundwater, which inoculated with anaerobic bacteria derived from sewage treatment plant. Compared with the single biodegradation system without electrodes, the three-dimensional electrodes with a high surface enabled an increase of alpha diversity of the microbial community (increased by 52.6% in Shannon index), and provided adaptive ecological niche for more bacteria. The application of weak voltage (0.6 V) furtherly optimized the microbial community structure, and promoted the aggregation of microorganisms with the formation of dense biofilm. Desorption experiment proved that the contaminants were removed from the groundwater mainly via adsorption by the biofilm rather than biodegradation, and compared with the reactor without electricity, the bioelectrochemical system increased the adsorption capacity from 50.0% to 74.5%. The aggregated bacteria on the surface of electrodes were mainly dominated by Delftia tsuruhatensis (85.0%), which could secrete extracellular polymers and has a high adsorption capacity (0.30 mg/g electrode material) for the contaminants. We found that a bioelectrochemical system with a three-dimensional electrode could stimulate the formation of dense biofilm and remove the organic contaminants as well as their possible more toxic degradation intermediates via adsorption. This study provides important guidance for applying bioelectrochemical system in groundwater or wastewater treatment.

Simultaneous microbial electrochemical degradation of methyl orange and bioelectricity generation using coculture as anode inoculum in a microbial fuel cell

Methyl Orange, an azo dye, is a widely used colouring agent in the textile industry. The study aimed to investigate the efficiency of bioremediating bacteria in degrading methyl orange. Escherichia coli (E. coli), a Methyl Orange-degrading bacterium, was isolated from cow dung and its biochemical properties were analysed using 16S rRNA sequencing, and MALDI-TOF MS. A pre-cultured strain of Pseudomonas aeruginosa was co-cultured with E. coli in 1:1 ration in a microbial fuel cell (MFC) for simultaneous electricity production and methyl orange degradation. The degradation was combined with biological wastewater treatment at varying Methyl Orange concentrations, and the electrochemical characteristics were analysed through polarisation study, cyclic voltammetry, and electrochemical impedance spectroscopy. The impact of parameters such as anolyte pH, dye concentration, incubation time, and substrate concentrations were also studied. This study confirmed E. coli as an effective methyl orange degrading bacteria with a maximum % degradation efficiency of 98% after 48 h incubation at pH 7.0. The co-culture of isolated microorganisms at 250 mg/L of methyl orange concentration showed a maximum power density 6.5 W/m3. Further, anode modification with Fe2O3 nanoparticles on the anode surface enhanced power production to 11.2 W/m3, an increase of 4.7 W/m3.

Towards bio-utilization and energy recovery potential exploration of membrane foulant from membrane bioreactor by using microbial fuel cell-centered technology

The utilization of membrane foulant is expected to push forward the developments of membrane bioreactor (MBR). In this study, the combination of microbial fuel cell (MFC) with bio-electrochemical enhanced hydrolysis process was proposed, and three systems were conducted to utilize the membrane foulant and simultaneously harvest electricity. Polysaccharides (PS), proteins (PN) and humic acid (HA) concentration variations and the fluorescent compound changes in different chambers revealed the biodegradability of membrane foulant. Optimized HRT improved the hydrolysis of membrane foulant while allowing MFC to utilize the biodegradable components efficiently. MFC-MFC system had the highest voltage and satisfactory effluent quality at HRT of 1 d. Microbial community structure analysis indicated that Proteobacteria, Planctomycetes and Bacteroidetes were the majority phyla and network analysis further revealed that Proteobacteria played a key role in membrane foulant utilization. This study suggests that MFC hybrid systems has potential application for synchronous membrane foulant reuse and energy recovery.

Biofilm metagenomic characteristics behind high coulombic efficiency for propanethiol deodorization in two-phase partitioning microbial fuel cell

Hydrophobic volatile organic sulfur compounds (VOSCs) are frequently found during sewage treatment, and their effective management is crucial for reducing malodorous complaints. Microbial fuel cells (MFC) are effective for both VOSCs abatement and energy recovery. However, the performance of MFC on VOSCs remains limited by the mass transfer efficiency of MFC in aqueous media. Inspired by two-phase partitioning biotechnology, silicone oil was introduced for the first time into MFC as a non-aqueous phase (NAP) medium to construct two-phase partitioning microbial fuel cell (TPPMFC) and augment the mass transfer of target VOSCs of propanethiol (PT) in the liquid phase. The PT removal efficiency within 32 h increased by 11-20% compared with that of single-phase MFC, and the coulombic efficiency of TPPMFC (11.01%) was 4.32-2.68 times that of single-phase MFC owing to the fact that highly active desulfurization and thiol-degrading bacteria (e.g., Pseudomonas, Achromobacter) were attached to the silicone oil surface, whereas sulfur-oxidizing bacteria (e.g., Thiobacillus, Commonas, Ottowia) were dominant on the anodic biofilm. The outer membrane cytochrome-c content and NADH dehydrogenase activity improved by 4.15 and 3.36 times in the TPPMFC, respectively. The results of metagenomics by KEGG and COG confirmed that the metabolism of PT in TPPMFC was comprehensive, and that the addition of a NAP upregulates the expression of genes related to sulfur metabolism, energy generation, and amino acid synthesis. This finding indicates that the NAP assisted bioelectrochemical systems would be promising to solve mass-transfer restrictions in low solubility contaminates removal.

Simultaneous dairy wastewater treatment and bioelectricity production in a new microbial fuel cell using photosynthetic Synechococcus

Photosynthetic microbial fuel cell (PMFC) is a novel technology, which employs organic pollutants and organisms to produce electrons and biomass and capture CO2 by bio-reactions. In this study, a new PMFC was developed based on Synechococcus sp. as a biocathode, and dairy wastewater was used in the anode chamber. Different experiments including batch feed mode, semi-continuous feed mode, Synechococcus feedstock to the anode chamber, Synechococcus-Chlorella mixed system, the feedstock of treated wastewater to the cathode chamber, and use of extra nutrients in the anodic chamber were performed to investigate the behavior of the PMFC system. The results indicated that the PMFC with a semi-continuous feed mode is more effective than a batch mode for electricity generation and pollutant removal. Herein, maximum power density, chemical oxygen demand removal, and Coulombic efficiency were 6.95 mW/m2 (450 Ω internal resistance), 62.94, and 43.16%, respectively, through mixing Synechococcus sp. and Chlorella algae in the batch-fed mode. The maximum nitrate and orthophosphate removal rates were 98.83 and 68.5%, respectively, wherein treated wastewater in the anode was added to the cathode. No significant difference in Synechococcus growth rate was found between the cathodic chamber of PMFC and the control cultivation cell. The heating value of the biocathode biomass at maximum Synechococcus growth rate (adding glucose into the anode chamber) was 0.2235 MJ/Kg, indicating the cell's high ability for carbon dioxide recovery. This study investigated not only simultaneous bioelectricity production and dairy wastewater in a new PMFC using Synechococcus sp. but also studied several operational parameters and presented useful information about their effect on PMFC performance.

Acclimation of electroactive biofilms under different operating conditions: comprehensive analysis from architecture, composition, and metabolic activity

Electroactive biofilms (EABs) have aroused wide concern in waste treatment due to their unique capability of extracellular electron transfer with solid materials. The combined effect of different operating conditions on the formation, microbial architecture, composition, and metabolic activity of EABs is still unknown. In this study, the impact of three different factors (anode electrode, substrate concentration, and resistance) on the acclimation and performance of EABs was investigated. The results showed that the shortest start-up time of 127.3 h and highest power density of 0.84 W m-2 were obtained with carbon brush as electrode, low concentration of substrate (1.0 g L-1), and 1000 Ω external resistance (denoted as N1). The EABs under N1 condition also represented strongest redox capacity, lowest internal resistance, and close arrangement of bacteria. Moreover, the EABs cultured under different conditions both showed similar results, with direct electron transfer (DET) dominated from EABs to anode. Microbial community compositions indicated that EABs under N1 condition have lowest diversity and highest abundance of electroactive bacteria (46.68%). Higher substrate concentration (3.0 g L-1) promoted the proliferation of some other bacteria without electroactivity, which was adverse to EABs. The metabolic analysis showed the difference of genes related to electron transfer (cytochrome C and pili) and biofilm formation (xap) of EABs under different conditions, which further demonstrated the higher electroactivity of EABs under N1. These results provided a comprehensive understanding of the effect of different operating conditions on EABs including biofilm formation and electrochemical activity.

Enhanced removal of antibiotic and antibiotic resistance genes by coupling biofilm electrode reactor and manganese ore substrate up-flow microbial fuel cell constructed wetland system

Manganese ore substrate up-flow microbial fuel cell constructed wetland (UCW-MFC(Mn)) as an innovative wastewater treatment technology for purifying antibiotics and electricity generation with few antibiotic resistance genes (ARGs) generation has attracted attention. However, antibiotic purifying effects should be further enhanced. In this study, a biofilm electrode reactor (BER) that needs direct current driving was powered by a Mn ore anode (UCW-MFC(Mn)) to form a coupled system without requiring direct-current source. Removal efficiencies of sulfadiazine (SDZ), ciprofloxacin (CIP) and the corresponding ARGs in the coupled system were compared with composite (BER was powered by direct-current source) and anaerobic systems (both of BER and UCW-MFC were in open circuit mode). The result showed that higher antibiotic removal efficiency (94% for SDZ and 99.1% for CIP) in the coupled system was achieved than the anaerobic system (88.5% for SDZ and 98.2% for CIP). Moreover, electrical stimulation reduced antibiotic selective pressure and horizontal gene transfer potential in BER, and UCW-MFC further reduced ARG abundances by strengthening the electro-adsorption of ARG hosts determined by Network analysis. Bacterial community diversity continuously decreased in BER while it increased in UCW-MFC, indicating that BER mitigated the toxicity of antibiotic. Degree of modularity, some functional bacteria (antibiotic degrading bacteria, fermentative bacteria and EAB), and P450 enzyme related to antibiotic and xenobiotics biodegradation genes were enriched in electric field existing UCW-MFC, accounting for the higher degradation efficiency. In conclusion, this study provided an effective strategy for removing antibiotics and ARGs in wastewater by operating a BER-UCW-MFC coupled system.

Improved electrochemical properties of graphite electrodes incubated with iron powders in rice-paddy fields boost power outputs from microbial fuel cells

Studies have shown that the supplementation of anode-surrounding soil with zero-valent iron (ZVI) boosts power outputs from rice paddy-field microbial fuel cells (RP-MFCs). In order to understand mechanisms by which ZVI boosts outputs from RP-MFCs, the present study operated RP-MFCs with and without ZVI, and compositions of anode-associated bacteria and electrochemical properties of graphite anodes were analyzed after 3-month operation. Metabarcoding using 16S rRNA gene fragments showed that bacterial compositions did not largely differ among these RP-MFCs. Cyclic voltammetry showed improved electrochemical properties of anodes recovered from ZVI-supplemented RP-MFCs, and this was attributed to the adhesion of iron-oxide films onto graphite surfaces. Bioelectrochemical devices equipped with graphite anodes recovered from ZVI-supplemented RP-MFCs generated higher currents than those with fresh graphite anodes. These results suggest that ZVI is oxidized to iron oxides in paddy-field soil and adheres onto graphite anodes, resulting in the boost of power outputs from RP-MFCs.

An n-Type Conjugated Oligoelectrolyte Mimics Transmembrane Electron Transport Proteins for Enhanced Microbial Electrosynthesis

Interfacing bacteria as biocatalysts with an electrode provides the basis for emerging bioelectrochemical systems that enable sustainable energy interconversion between electrical and chemical energy. Electron transfer rates at the abiotic-biotic interface are, however, often limited by poor electrical contacts and the intrinsically insulating cell membranes. Herein, we report the first example of an n-type redox-active conjugated oligoelectrolyte, namely COE-NDI, which spontaneously intercalates into cell membranes and mimics the function of endogenous transmembrane electron transport proteins. The incorporation of COE-NDI into Shewanella oneidensis MR-1 cells amplifies current uptake from the electrode by 4-fold, resulting in the enhanced bio-electroreduction of fumarate to succinate. Moreover, COE-NDI can serve as a "protein prosthetic" to rescue current uptake in non-electrogenic knockout mutants.

Sustainable application of tubular photosynthesis microbial desalination cell for simultaneous desalination of seawater for potable water supply associated with sewage treatment and energy recovery

A sustainable approach for simultaneous desalination of actual seawater for potable water supply, and bioelectrochemical treatment of sewage associated with power generation was evaluated in a tubular photosynthesis desalination microbial fuel cell (PDMC) continually operated for 180 days. Anion exchange membrane (AEM) was used to separate the bioanode and desalination compartments, whereby, and cation exchange membrane (CEM) was used to separate the desalination and biocathode compartments. Mixed bacterial species and mixed microalgae were utilized for inoculation of the bioanode and biocathode, respectively. The results revealed that maximum and average desalination efficiencies of saline seawater fed to the desalination compartment were 80 ± 1 % and 72 ± 1.2 %, respectively. Maximum and average removal efficiencies of the sewage organic content in the anodic compartment were up to 99.3 ± 0.5 % and 91.0 ± 0.8 %, respectively associated with maximum power output of 430.7 ± 0.7 mW/m³. In spite of the heavy growth of the mixed bacterial species and microalgae as well, no fouling of AEM and CEM was observed during the entire period of operation. Kinetic study demonstrated that Blackman model described well the bacterial growth. Dense and healthy growth of biofilm and the microalgae in the anodic and cathodic compartments, respectively were clearly observed during the operation period. The promising outcomes of this investigation demonstrated that the suggested approach is a potential sustainable option for simultaneous desalination of saline seawater for potable water supply, biotreatment of sewage, and power generation.

Self-assembly of cell-embedding reduced graphene oxide/ polypyrrole hydrogel as efficient anode for high-performance microbial fuel cell

A three-dimensional (3D) macroporous reduced graphene oxide/polypyrrole (rGO/Ppy) hydrogel assembled by bacterial cells was fabricated and applied for microbial fuel cells. By taking the advantage of electroactive cell-induced bioreduction of graphene oxide and in-situ polymerization of Ppy, a facile self-assembly by Shewanella oneidensis MR-1and in-situ polymerization approach for 3D rGO/Ppy hydrogel preparation was developed. This facile one-step self-assembly process enabled the embedding of living electroactive cells inside the hydrogel electrode, which showed an interconnected 3D macroporous structures with high conductivity and biocompatibility. Electrochemical analysis indicated that the self-assembly of cell-embedding rGO/Ppy hydrogel enhanced the electrochemical activity of the bioelectrode and reduced the electron charge transfer resistance between the cells and the electrode. Impressively, extremely high power output of 3366 ± 42 mW m^-2 was achieved from the MFC with cell-embedding rGO/Ppy hydrogel rGO/Ppy, which was 8.6 times of that delivered from the MFC with bare electrode. Further analysis indicated that the increased cell loading by the hydrogel and improved electrochemical activity by the rGO/Ppy composite would be the underlying mechanism for this performance improvement. This study provided a facile approach to fabricate the biocompatible and electrochemical active 3D nanocomposites for MFC, which would also be promising for performance optimization of various bioelectrochemical systems.

Flow-through laminar anodes with variable interlaminar distance to modulate the current density of urine-fed bio-electrochemical systems

Three-dimensional (3D) porous anodes used in urine-powered bio-electrochemical applications usually lead to the growth of electro-active bacteria on the outer electrode surface, due to limited microbial access to the internal structure and lack of permeation of culture medium through the entire porous architecture. In this study, we propose the use of 3D monolithic Ti4O7 porous electrodes with controlled laminar structures as microbial anodes for urine-fed bio-electrochemical systems. The interlaminar distance was tuned to modulate the anode surface areas and, thus, the volumetric current densities. To profit from the true area of the electrodes, urine feeding was performed as a continuous flow through the laminar architectures. The system was optimized according to the response surface methodology (RSM). The electrode interlaminar distance and the concentration of urine were selected as independent variables, with the volumetric current density as the output response to optimize. Maximum current densities of 5.2 kA.m-3 were produced from electrodes with 12 µm-interlaminar distance and 10 %v/v urine concentrations. The present study demonstrates the existence of a trade-off between the accesibility to the internal electrode structure and the effective usage of the surface area to maximize the volumetric current density when diluted urine is used as flowing-through feeding fuel.

Self-assembly of cell-embedding reduced graphene oxide/ polypyrrole hydrogel as efficient anode for high-performance microbial fuel cell

A three-dimensional (3D) macroporous reduced graphene oxide/polypyrrole (rGO/Ppy) hydrogel assembled by bacterial cells was fabricated and applied for microbial fuel cells. By taking the advantage of electroactive cell-induced bioreduction of graphene oxide and in-situ polymerization of Ppy, a facile self-assembly by Shewanella oneidensis MR-1and in-situ polymerization approach for 3D rGO/Ppy hydrogel preparation was developed. This facile one-step self-assembly process enabled the embedding of living electroactive cells inside the hydrogel electrode, which showed an interconnected 3D macroporous structures with high conductivity and biocompatibility. Electrochemical analysis indicated that the self-assembly of cell-embedding rGO/Ppy hydrogel enhanced the electrochemical activity of the bioelectrode and reduced the electron charge transfer resistance between the cells and the electrode. Impressively, extremely high power output of 3366 ± 42 mW m^-2 was achieved from the MFC with cell-embedding rGO/Ppy hydrogel rGO/Ppy, which was 8.6 times of that delivered from the MFC with bare electrode. Further analysis indicated that the increased cell loading by the hydrogel and improved electrochemical activity by the rGO/Ppy composite would be the underlying mechanism for this performance improvement. This study provided a facile approach to fabricate the biocompatible and electrochemical active 3D nanocomposites for MFC, which would also be promising for performance optimization of various bioelectrochemical systems.

Ammonia recovery from organic nitrogen in synthetic dairy manure with a microbial fuel cell

Increasing pressures on the animal and cropland agriculture sectors have led to the realization of problems with animal waste management and ammonia-based fertilizer supply. Bioelectrochemical systems (BES) are a new-age technology that offer a way to address these problems. Microbial fuel cells (MFCs), one type of BES, are traditionally used for electricity generation from microbial degradation of organic matters, but can also be used to recover nutrients from wastes simultaneous with treatment. This research investigated an MFC for ammonia recovery from the organic nitrogen (orgN) fraction of synthetic dairy manure, using the simple amino acid glycine as the orgN source. We used five different synthetic manure compositions to determine their effects on MFC performance, and found minimal sacrifices in performance under orgN conditions when compared to the base condition without orgN. The MFC achieved greater than 90% COD removal in all orgN conditions. Nitrogen (N) removal efficiencies of between 40% and 60% were achieved in orgN conditions, indicating that organic nitrogen can be used as the substrate for ammonia mineralization and further recovery as fertilizer. In addition, we found the MFC was largely populated by electrogenic organisms from the phyla Bacteroidota, Firmicutes, Proteobacteria, and Halobacterota, with organisms in both Bacteroidota and Firmicutes capable of N mineralization present. Lastly, we found that in conditions where orgN is scarce and the only N source provided, microbes preferentially degraded organic matter from other dead organisms, especially as an N source. This increases the concentration of N in the MFC system and introduces important operational constraints for MFCs operated for ammonia recovery from orgN.

Comparative Studies on Electrodes for Rumen Bacteria Microbial Fuel Cells

Microbial fuel cells (MFCs) using rumen bacteria have been proposed as a power source for running devices inside cattle. In this study, we explored the key parameters of the conventional bamboo charcoal electrode in an attempt to improve the amount of electrical power generated by the microbial fuel cell. We evaluated the effects of the electrode's surface area, thickness, and rumen content on power generation and determined that only the electrode's surface area affects power generation levels. Furthermore, our observations and bacterial count on the electrode revealed that rumen bacteria concentrated on the surface of the bamboo charcoal electrode and did not penetrate the interior, explaining why only the electrode's surface area affected power generation levels. A Copper (Cu) plate and Cu paper electrodes were also used to evaluate the effect of different electrodes on measuring the rumen bacteria MFC's power potential, which had a temporarily higher maximum power point (MPP) compared to the bamboo charcoal electrode. However, the open circuit voltage and MPP decreased significantly over time due to the corrosion of the Cu electrodes. The MPP for the Cu plate electrode was 775 mW/m² and the MPP for the Cu paper electrode was 1240 mW/m², while the MPP for bamboo charcoal electrodes was only 18.7 mW/m². In the future, rumen bacteria MFCs are expected to be used as the power supply of rumen sensors.

Prophage Induction Causes Geobacter Electroactive Biofilm Decay

Sustaining a metabolically active electroactive biofilm (EAB) is essential for the high efficiency and durable operation of microbial fuel cells (MFCs). However, EABs usually decay during long-term operation, and, until now, the causes remain unknown. Here, we report that lysogenic phages can cause EAB decay in Geobacter sulfurreducens fuel cells. A cross-streak agar assay and bioinformatic analysis revealed the presence of prophages on the G. sulfurreducens genome, and a mitomycin C induction assay revealed the lysogenic to lytic transition of those prophages, resulting in a progressive decay in both current generation and the EAB. Furthermore, the addition of phages purified from decayed EAB resulted in accelerated decay of the EAB, thereafter contributing to a faster decline in current generation; otherwise, deleting prophage-related genes rescued the decay process. Our study provides the first evidence of an interaction between phages and electroactive bacteria and suggests that attack by phages is a primary cause of EAB decay, having significant implications in bioelectrochemical systems.

Preparation of AuNP-CQD/PDA/GO anode for MFC and its treatment of oily sewage from ships

Oily sewage discharged from ships has brought many harms to the marine environment, even endangered marine life and human life. As a new type of water treatment technology, microbial fuel cell (MFC) can efficiently treat pollutants and recover energy, which can be converted into electric energy. However, its large internal resistance restricts its development. In order to solve the problems of low power generation performance and poor biocompatibility of microbial fuel cell, a gold nanoparticle-carbon quantum dot/polydopamine/graphene oxide/bacterial cellulose (AuNP-CQD/PDA/GO/BC) electrode was prepared, and it was applied to the treatment of oily sewage from ships. Fourier transforms infrared spectroscopy, X-ray diffraction, scanning electron microscopy, gas chromatography-mass spectrometry, and contact angle measuring instrument were used to characterize the electrode. The results show that PDA bridges GO and AuNP-CQD particles through the electrostatic interaction/π-π bond/hydrogen bonding, respectively. This attracts a large number of microorganisms to attach to the surface of the porous anode material, which greatly improves the activity and quantity of microorganisms. Moreover, the maximum power density of AuNP-CQD/PDA/GO/BC electrode is 2624.91 mW/m², which obviously improves the electrochemical performance of MFC. The oil content of the treated water is ≤ 15 mg/L, reaching the discharge of MARPOL 73/78 convention. Therefore, the proposed approach has paved new dimensions in not only the preparation of a new composite electrode materials but also its applications as effective degradation of ship oily sewage in MFC.

Stimulation of atrazine degradation by activated carbon and cathodic effect in soil microbial fuel cell

Soil microbial fuel cells (MFCs) have been increasingly studied in recent years and have attracted significant attention as an environmentally sustainable bioelectrochemical technology. However, the poor conductivity of the soil matrix and the neglect of the cathodic function have limited its application. In this study, quartz sand and activated carbon were subjected to investigation on their influence on atrazine degradation. Atrazine was introduced in different layers (cathode, upper layer) to explore the cathodic effect on atrazine removal. The results revealed that activated carbon could reduce the internal resistance (693 Ω) and generate the highest power density (25.51 mW/m²) of the soil MFCs, and thus increase the removal efficiency (97.92%) of atrazine. The dynamic degradation profiles of atrazine were different for different adding layers. The cathode electrode acted as an electron donor could increase the distance of the effective influence of the soil MFCs' cathode from the middle to the cathode layer. The cathode (region) and the region close to the cathode could degrade atrazine with the atrazine removal efficiencies ranging from 60.67% to 92.79%, and the degradation ability of the cathode was stronger than that of other layers. The degradation effect followed the order: cathode > upper > lower > middle). Geobacter, Desulfobulbus, and Desulfuromonas belonging to the δ-Proteobacteria class were identified as the dominant electroactive microorganisms in the anode layer, while their relative abundances are quite low in the upper and cathode layers. Pseudomonas is an atrazine-degrading bacterium, but its relative abundance was only 0.13-0.51%. Thus, bioelectrochemistry rather than microbial degradation was the primary driving force.

Investigating Variability in Microbial Fuel Cells

In scientific studies, replicas should replicate, and identical conditions should produce very similar results which enable parameters to be tested. However, in microbial experiments which use real world mixed inocula to generate a new "adapted" community, this replication is very hard to achieve. The diversity within real-world microbial systems is huge, and when a subsample of this diversity is placed into a reactor vessel or onto a surface to create a biofilm, stochastic processes occur, meaning there is heterogeneity within these new communities. The smaller the subsample, the greater this heterogeneity is likely to be. Microbial fuel cells are typically operated at a very small laboratory scale and rely on specific communities which must include electrogenic bacteria, known to be of low abundance in most natural inocula. Microbial fuel cells (MFCs) offer a unique opportunity to investigate and quantify variability as they produce current when they metabolize, which can be measured in real time as the community develops. In this research, we built and tested 28 replica MFCs and ran them under identical conditions. The results showed high variability in terms of the rate and amount of current production. This variability perpetuated into subsequent feeding rounds, both with and without the presence of new inoculate. In an attempt to control this variability, reactors were reseeded using established "good" and "bad" reactors. However, this did not result in replica biofilms, suggesting there is a spatial as well as a compositional control over biofilm formation. IMPORTANCE The research presented, although carried out in the area of microbial fuel cells, reaches an important and broadly impacting conclusion that when using mixed inoculate in replica reactors under replicated conditions, different communities emerge capable of different levels of metabolism. To date there has been very little research focusing on this, or even reporting it, with most studies using duplicate or triplicate reactors, in which this phenomenon is not fully observed. Publishing data in which replicas do not replicate will be an important and brave first step in the research into understanding this fundamental microbial process.

Analysis and enhancement of the energy utilization efficiency of corn stover using strain Lsc-8 in a bioelectrochemical system

The strain Lsc-8 can produce a current density of 33.08 µA cm^-2 using carboxymethylcellulose (CMC) as a carbon source in a three-electrode configuration. A co-culture system of strain Lsc-8 and Geobacter sulfurreducens PCA was used to efficiently convert cellulose into electricity to improve the electricity generation capability of microbial fuel cells (MFCs). The maximum current density achieved by the co-culture with CMC was 559 μA cm^-2, which was much higher than that of strain Lsc-8 using CMC as the carbon source. The maximum power density reached 492.05 ± 52.63 mW cm^-2, which is much higher than that previously reported. Interaction mechanism studies showed that strain Lsc-8 had the ability to secrete riboflavin and convert cellulose into acetic acid, which might be the reason for the high electrical production performance of the co-culture system. In addition, to the best of our knowledge, a co-culture or single bacteria system using agricultural straw as the carbon source to generate electricity has not been reported. In this study, the maximum current density of the three-electrode system inoculated with strain Lsc-8 was 14.56 μA cm^-2 with raw corn stover as the sole carbon source. Raw corn stover as a carbon source was also investigated for use in a co-culture system. The maximum current density achieved by the co-culture was 592 μA cm^-2. The co-culture system showed a similar electricity generation capability when using raw corn stover and when using CMC. This research shows for the first time that a co-culture or single bacteria system can realize both waste biomass treatment and waste power generation.

The electron transport mechanism of downflow Leersia hexandra Swartz constructed wetland-microbial fuel cell when used to treat Cr(VI) and p-chlorophenol

Constructed wetland-microbial fuel cells are used to treat heavy metal and/or refractory organic wastewater. However, the electron transport mechanism of downflow Leersia hexandra constructed wetland-microbial fuel cells (DLCW-MFCs) is poorly understood when used to treat composite-polluted wastewater containing Cr(VI) and p-chlorophenol (4-CP) (C&P). In this study, metagenomics and in situ electrochemical techniques were used to investigate the electrochemical properties and the electricigens and their dominant gene functions. The DLCW-MFC was used to treat C&P and single-pollutant wastewater containing Cr(VI) (SC) and 4-CP (SP). The results showed that C&P had a higher current response and charge transfer capability and lower solution resistance plus charge transfer resistance. The anode bacteria solution of C&P contained more electron carriers (RF, FMN, FAD, CoQ10, and Cyt c). Metagenomic sequencing indicated that the total relative abundance of the microorganisms associated with electricity production (Desulfovibrio, Pseudomonas, Azospirillum, Nocardia, Microbacterium, Delftia, Geobacter, Acinetobacter, Bacillus, and Clostridium) was the highest in C&P (4.24%). However, Microbacterium was abundant in SP (0.12%), which exerted antagonistic effects on other electricigens. Among the 10 electricigens based on gene annotation, C&P had a higher overall relative abundance of the Unigene gene annotated to the KO pathway and CAZy level B compared with SC and SP, which were 1.31% and 0.582% respectively. Unigene153954 (ccmC), Unigene357497 (coxB), and Unigene1033667 (ubiG) were related to the electron carrier Cyt c, electron transfer, and CoQ biosynthesis, respectively. These were annotated to Desulfovibrio, Delftia, and Pseudomonas, respectively. Unigene161312 (AA1) used phenols and other substrates as electron donors and was annotated to Pseudomonas. Other functional carbohydrate enzyme genes (e.g., GT2, GT4, and GH31) used carbohydrates as donors and were annotated to other electricigens. This study provides a theoretical basis for electron transfer to promote the development of CW-MFCs.

A three-dimensional phenolic-based carbon anode for microbial electrochemical system with customized macroscopic pore structure to promote interior bacteria colonization

Microbial electrochemical system (MES) is an emerging wastewater treatment technology that compensates the energy demands of containments removal by in situ converting the chemical energy of organic pollutants. As the structure for exoelectrogens and the reaction site of extracellular electron transfer (EET), the anode is essential for MES. The future commercial application of MES requires efficiency and large-scale fabrication available anode. In this study, a 3D anode with millimeter-scale pores (3D-MPA) was successfully constructed by sacrificial template method, with low-cost phenolic resin as carbon precursor and polymethyl methacrylate (PMMA) pellets as template. With customized and ordered pore of 1 mm, the 3D-MPAs allowed the microorganisms to colonize inside, improving anodic space utilization efficiency. Different carbonization temperature in tested range from 700 °C to 1000 °C regulated the micrometer-scale convex structures and surface roughness of 3D-MPAs, causing electrochemical performance changes. The 3D-MPA-900 obtained the largest electroactive surface area (102 ± 4.1 cm²) and smallest ohmic resistance (1.8 ± 0.09 Ω). Equipped with MES, 3D-MPA-900 reached the highest power density and current density (2590 ± 25 mW m^-2 and 5.20 ± 0.07 A m^-2). Among tested 3D-MPA, the excellent performance of 3D-MPA-900 might be attributed by its convex structures with suitable size and surface coverage. The surface roughness of 3D-MPA-900 enhanced the microorganism adherence, which then promoted EET on anode surface. Generally, phenolic-based 3D-MPA made of sacrificial-template method had controllable porous structure, large-scale fabrication availability, high chemical stability and excellent mechanical property, which could be promising for the commercial application of MES.

Polydopamine/polypyrrole-modified graphite felt enhances biocompatibility for electroactive bacteria and power density of microbial fuel cell

The interactions between the microbes and the surface of an anode play an important role in capturing the respiratory electrons from bacteria in a microbial fuel cell (MFC). The chemical and electrochemical characteristics of the carbon material affect biofilm growth and direct electron transfer in MFCs. This study examined the electrodeposition of polydopamine (PDA) and polypyrrole (PPY) on graphite felt electrode (GF). The MFC with the modified PDA/PPY-GF reached 920 mW/m², which was 1.5, 1.17, and 1.18 times higher than those of the GF, PDA-GF, and PPY-GF, respectively. PDA has superior hydrophilicity and adhesive force biofilm formation, while PPY provides electrochemically active sites for microbial electron transfer. Raman spectroscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller surface area measurements, and contact angle analysis revealed the enhanced physicochemical properties of the carbon electrode. These results show that co-doped PDA/PPY provides a strategy for electroactive biofilm development and improves the bioelectrochemical performance in realistic MFC reactors.

Effects of multiple key factors on the performance of petroleum coke-based constructed wetland-microbial fuel cell

In this study, two constructed wetland-microbial fuel cells (CW-MFC), including a closed-circuit system (CCW-MFC) and an open-circuit system (OCW-MFC) with petroleum coke as electrode and substrate, were constructed to explore the effect of multiple key factors on their operation performances. Compared to a traditional CW, the CCW-MFC system showed better performance, achieving an average removal efficiency of COD, NH₄⁺-N, and TN of 94.49 ± 1.81%, 94.99 ± 4.81%, and 84.67 ± 5.6%, respectively, when the aeration rate, COD concentration, and hydraulic retention time were 0.4 L/min, 300 mg/L, and 3 days. The maximum output voltage (425.2 mV) of the CCW-MFC system was achieved when the aeration rate was 0.2 L/min. In addition, the CCW-MFC system showed a greater denitrification ability due to the higher abundance of Thiothrix that might attract other denitrifying bacteria, such as Methylotenera and Hyphomicrobium, to participate in the denitrifying process, indicating the quorum sensing could be stimulated within the denitrifying microbial community.

Pretreatment of cyanobacterial biomass for the production of biofuel in microbial fuel cells

The present study delves into phototrophic cyanobacterial biomass production by concomitant CO₂ sequestration, selecting an effective pretreatment condition followed by using this as feedstock for green fuel or bioelectricity production by Microbial Fuel Cells (MFC). The performance of the various photobioreactors were put up against Anabaena sp. PCC 7120 biomass production. Maximum microalgal biomass of 1.15 gL^-1 was attained in an airlift bioreactor for 9 days under a light intensity of 100 µEm^-2s^-1. Pretreatment methods like sonication, HCl acid, and H₂O₂ treatment (2 % vv^-1) were applied to digest harvested biomass. Higher power output (6.76 Wm^-3) was attained, and 73.5 % COD was eliminated using 2 % (vv^-1) acid pre-treated biomass. Better results were obtained using acid pre-treated biomass because the conductivity of the anolyte increased with the neutralization of acid-pre-treated biomass. The results demonstrate that cyanobacterial biomass could be employed successfully as a renewable resource for green fuel generation in MFCs.

Bacterial community structure of electrogenic biofilm developed on modified graphite anode in microbial fuel cell

Formation of electrogenic microbial biofilm on the electrode is critical for harvesting electrical power from wastewater in microbial biofuel cells (MFCs). Although the knowledge of bacterial community structures in the biofilm is vital for the rational design of MFC electrodes, an in-depth study on the subject is still awaiting. Herein, we attempt to address this issue by creating electrogenic biofilm on modified graphite anodes assembled in an air-cathode MFC. The modification was performed with reduced graphene oxide (rGO), polyaniline (PANI), and carbon nanotube (CNTs) separately. To accelerate the growth of the biofilm, soybean-potato composite (plant) powder was blended with these conductive materials during the fabrication of the anodes. The MFC fabricated with PANI-based anode delivered the current density of 324.2 mA cm-2, followed by CNTs (248.75 mA cm-2), rGO (193 mA cm-2), and blank (without coating) (151 mA cm-2) graphite electrodes. Likewise, the PANI-based anode supported a robust biofilm growth containing maximum bacterial cell densities with diverse shapes and sizes of the cells and broad metabolic functionality. The alpha diversity of the biofilm developed over the anode coated with PANI was the loftiest operational taxonomic unit (2058 OUT) and Shannon index (7.56), as disclosed from the high-throughput 16S rRNA sequence analysis. Further, within these taxonomic units, exoelectrogenic phyla comprising Proteobacteria, Firmicutes, and Bacteroidetes were maximum with their corresponding level (%) 45.5, 36.2, and 9.8. The relative abundance of Gammaproteobacteria, Clostridia, and Bacilli at the class level, while Pseudomonas, Clostridium, Enterococcus, and Bifidobacterium at the genus level were comparatively higher in the PANI-based anode.

Promoted Sb removal with hydrogen production in microbial electrolysis cell by ZIF-67-derived modified sulfate-reducing bacteria bio-cathode

Bio-cathode Microbial electrolysis cell (MEC) has been widely discovered for heavy metals removal and hydrogen production. However, low electron transfer efficiency and heavy metal toxicity limit MEC treatment efficiency. In this study, ZIF-67 was introduced to modify Sulfate-reducing bacteria (SRB) bio-cathode to enhance the bioreduction of sulfate and Antimony (Sb) with hydrogen production in the MEC. ZIF-67 modified bio-cathode was developed from a bio-anode microbial fuel cell (MFC) by operating with an applied voltage of 0.8 V to reverse the polarity. Cyclic voltammetry, linear sweep voltammetry and electrochemical impedance were done to confirm the performance of the ZIF-67 modified SRB bio-cathode. The synergy reduction of sulfate and Sb was accomplished by sulfide metal precipitation reaction from SRB itself. Maximum sulfate reduction rate approached 93.37 % and Sb removal efficiency could reach 92 %, which relies on the amount of sulfide concentration generated by sulfate reduction reaction, with 0.923 ± 0.04 m³ H₂/m³ of hydrogen before adding Sb and 0.857 m³ H₂/m³ of hydrogen after adding Sb. The hydrogen was mainly produced in this system and the result of gas chromatography (GC) indicated that 73.27 % of hydrogen was produced. Meanwhile the precipitates were analyzed by X-ray diffraction and X-ray photoelectron spectroscopy to confirm Sb₂S₃ was generated from Sb (V).

Regulating the Electronic Structure of Cu-Nx Active Sites for Efficient and Durable Oxygen Reduction Catalysis to Improve Microbial Fuel Cell Performance

The efficient and durable oxygen reduction reaction (ORR) catalyst is of great significance to boost power generation and pollutant degradation in microbial fuel cells (MFCs). Although transition metal-nitrogen-codoped carbon materials are an important class of ORR catalysts, copper-nitrogen-codoped carbon is not considered a suitable MFC cathode catalyst due to the insufficient performance and especially instability. Herein, we report a three-dimensional (3D) hierarchical porous copper, nitrogen, and boron codoped carbon (3DHP Cu-N/B-C) catalyst synthesized by the dual template method. The introduced B atom as an electron donor increases the electron density around the Cu-N_x active site, which significantly promotes the efficiency of the ORR process and stabilizes the active site by preventing demetallization. Thus, the 3DHP Cu-N/B-C catalyst exhibited excellent ORR performance with the half-wave potential of 0.83 V (vs reversible hydrogen electrode (RHE)) in a 0.1 M KOH electrolyte and 0.68 V (vs RHE) in a 50 mM PBS electrolyte. Meanwhile, 3DHP Cu-N/B-C had satisfactory stability with 94.16% current retention after 24 h of chronoamperometry test, which is better than that of 20% Pt/C. The MFCs using 3DHP Cu-N/B-C not only showed a maximum power density of up to 760.14 ± 19.03 mW m^-2 but also operating durability of more than 50 days. Moreover, the 16S rDNA sequencing results presented that the 3DHP Cu-N/B-C catalyst had a positive effect on the microbial community of the MFC with more anaerobic electroactive bacteria in the anode biofilm and fewer aerobic bacteria in the cathode biofilm. This study provides a new approach for the development of Cu-based ORR electrocatalysts as well as guidance for the rational design of high-performance MFCs.

Microbial fuel cell: A green eco-friendly agent for tannery wastewater treatment and simultaneous bioelectricity/power generation

This review paper emphasised on the origin of hexavalent chromium toxicity in tannery wastewater and its remediation using novel Microbial Fuel Cell (MFC) technology, including electroactive bacteria, which are known as exoelectrogens, to simultaneously treat wastewater and its action in the production of bioenergy and the mechanism of Cr⁶⁺ reduction. Also, there are various parameters like electrode, pH, mode of operation, time of operation, and type of exchange membrane used for promising results shown in enhancing MFC production and remediation of Cr⁶⁺. Destructive anthropological activities, such as leather making and electroplating industries are key sources of hexavalent chromium contamination in aquatic repositories. When Cr⁶⁺ enters the food chain and enters the human body, it has the potential to cause cancer. MFC is a green innovation that generates energy economically through the reduction of toxic Cr⁶⁺ to less toxic Cr³⁺. The organic substrates utilized at the anode of MFC act as electrons (e^-) donors. This review also highlighted the utilization of cheap substrates to make MFCs more economically suitable and the energy production at minimum cost.

An electricity-generating bacterium separated from oil sludge microbial fuel cells and its environmental adaptability

Electricity-generating bacteria as biocatalysts for microbial fuel cells (MFCs), their species, and power generation performance determine the pollution control and power generation performance of MFCs. And there are few studies on the types and performance of electricity-generating bacteria isolated from oily sludge microbial fuel cells. For improving the power generation performance of oily sludge MFCs, an electricity-generating bacterium was isolated from the oily sludge. More importantly, the adaptability of nitrogen to phosphorus ratio, temperature, and pH of the electricity-generating bacteria were adjusted by a controlled variable method. The results of this study showed that the electricity-generating bacterium was identified as Bacillus cereus, with a rod-shaped cell, about 0.5-1.0 μm in length. The optimal nitrogen-phosphorus ratio, temperature, and pH of MFCs were 4.67:1, 25 ℃, and pH = 7, respectively. Its maximum power density, COD, and oil removal rate was up to 65 mW·m^-3, 90.51%, and 87.76%, respectively. The study of this functional bacterium will provide beneficial assistance for the improvement of oil removal and power generation performance of oily sludge MFCs.

Solid slow-release carbon source assembled microbial fuel cell for promoting superior nitrogen removal in an aerobic granular sludge bioreactor

Although the coupling process of microbial fuel cell (MFC) and activated sludge is widely used for organic matter removal and electric energy recovery, the problem of high effluent nitrate still exists due to the lack of influent carbon source. Herein, a poly (butanediol succinate) (PBS) assembled MFC was established in an aerobic granular sludge (AGS) bioreactor for simultaneous promoting nitrogen removal and electricity generation. Compared to AGS-Control group, the total inorganic nitrogen (TIN) and COD removal efficiencies of AGS-MFC group were improved to 84.3 ± 2.6% and 93.5 ± 0.5% after 100-days operation. The average output voltage and the maximum power density of the MFC module were 223.7 mV and 59.6 mW/m², respectively. Through high-throughput sequencing analysis, Thauera-related denitrifying bacteria had the highest relative abundances (20.0% and 31.4%) in both bioreactors. The relative abundance of Nitrosomonas-related ammonia oxidizing bacteria (AOB) in AGS-MFC (1.8%) was enriched than AGS-Control (1.1%). In MFC module, Thauera (16.2%) with denitrification and power generation was dominant in anodic biofilms under PBS enhancement. This study provides scientific basis for the application of submersible MFC enhanced deep nitrogen removal under aerobic conditions.

Iron cobalt-doped carbon nanofibers anode to simultaneously boost bioelectrocatalysis and direct electron transfer in microbial fuel cells: Characterization, performance, and mechanism

A self-supporting electrode (FeCo-MOF/CNFs) combining iron cobalt bimetallic metal-organic frameworks (FeCo-MOFs) with carbon nanofibers (CNFs) was applied as the anode of a microbial fuel cell (MFC). The introduction of FeCo-MOFs enhanced graphitization degree and electrical conductivity, which endowed FeCo-MOF/CNFs with excellent electrocatalytic performance and good biocompatibility. The hierarchical porous structure of FeCo-MOF/CNFs provided abundant attachment sites for electroactive bacteria (EAB) and facilitated rapid electron transfer. The MFC equipped with FeCo-MOF/CNFs anode (FeCo/CNFs-MFC) exhibited considerable power generation output (maximum power density: 5.3 ± 0.2 W/m², coulombic efficiency: 54 ± 4 %). In addition, FeCo/CNFs-MFC achieved a direct electron transfer (DET) catalytic current density of 0.63 A/m². FeCo-MOF/CNFs could simultaneously enhance the bioelectrocatalysis activity and promote the DET process of EAB, which provided an effective way to improve the sluggish extracellular electron transport process of the MFC anode.