A spreadsheet calculator for estimating biogas production and economic measures for UK-based farm-fed anaerobic digesters

An energy-efficient upconcentration of the bio-based carboxylic acids using multiple-effect evaporators

This study proposes an integrated process chain to upconcentrate short-chain carboxylic acids (SCCA) like acetic, propionic, and butyric acid, produced from anaerobic fermentation of the organic fraction of municipal solid waste. The starting point is the residual biogas, which is produced from the anaerobic digestion of the solid fraction obtained after the acid fermentation. Using this biogas energy, integrated multiple-effect evaporator scenarios with varying SCCA initial concentrations from 10 to 40 g/L in the liquid fraction were simulated in Aspen Plus®. Using four-effects and starting from 20 g/L, SCCA can be upconcentrated to 526 g/L with only minor acids loss. This process requires 9.8 kWh energy/kg SCCA produced, which was provided by the biogas generated from the solid residue post-digestion. Also, the accuracy of the simulation results across different pressure ranges has been confirmed through the validation of the input model used in Aspen Plus®. The carbon footprint of this process was 1.24 kg CO2-eq./kg SCCA produced, which was 50% lower than the existing processes producing fossil-based SCCA. A techno-economic assessment have also been performed for different evaporator configurations.

The link between organic matter composition and the biogas yield of full-scale sewage sludge anaerobic digestion

The principal parameters influencing anaerobic digestion (AD) of sewage sludge have been extensively studied in controlled laboratory experiments, but the effects of sludge composition on full-scale systems have received relatively little attention. Sludge samples from eight major wastewater treatment plants (WWTPs) in the UK were examined to determine the effects of sludge composition on digestion performance. The biogas yield (BY) was estimated by two different methods: (1) a standard approach based on the reduction in volatile solids (VS), and (2) a more detailed mass balance of major constituent fractions of organic matter in sludge. The results showed that BY increased significantly with the overall amount of VS contained in digester feed sludge. In terms of the effects of individual fractions, BY was significantly related to and increased with the fat and cellulose contents in raw sludge, consistent with the high calorific value of fat and the digestibilities of both substrates, relative to the other major organic components. The results demonstrated the importance of sludge composition on digester performance and strategies to maximise BY were identified, for instance, by increasing codigestion of high fat containing substrates, and by utilising fat, oil and grease collected in-sewer and at WWTP.

The impact of incineration phase-out on municipal solid waste landfilling and life cycle environmental performance: Case study of Madrid, Spain

Reducing the amount of municipal solid waste (MSW) fed to incineration while enhancing source separation and biological treatments is being considered a mean to protect the environment and human health and promote recycling. However, such a strategy can compromises the landfill reduction targets while the associated environmental benefits remain so far unexplored and, in any case, any potential benefit should be evaluated for specific situations. In this study we applied material flow analysis (MFA) and life cycle assessment (LCA) to quantitatively evaluate the potential impact of phasing-out incineration in Madrid, Spain. The current MSW management system was assessed against future scenarios that describe the elimination of incineration as well as the increase of source separation, recycling, composting, and anaerobic digestion. The results revealed that incineration phase-out jeopardizes landfill reduction. However, phasing-out incineration can reduce the impact on acidification, terrestrial and marine eutrophication, photochemical ozone formation, human toxicity cancer effects, and ecotoxicity. The climate impact ranges from irrelevant to largely beneficial depending on how the biogenic carbon is considered. The transition towards a renewable electricity mix and the increase in source separation of biodegradable waste seriously compromise the climate benefits of incineration over landfilling. Overall, actions are required in order to align incineration phase-out with the landfill reduction objective, namely upgrading material recovery facilities to reduce rejects and seeking alternative pathways for the rejects that will always exist.

Micro Nuclear Reactors: Potential Replacements for Diesel Gensets within Micro Energy Grids

Resilient operation of medium/large scale off-grid energy systems, which is a key challenge for energy crisis solutions, requires continuous and sustainable energy resources. Conventionally, micro energy grids (MEGs) are adopted to supply electricity and thermal energy simultaneously. Fossil-fired gensets, such as diesel generators, are indispensable components for off-grid MEGs due to the intermittent nature of renewable energy sources (RESs). However, fossil-fired gensets emit a significant amount of greenhouse gases (GHGs). Therefore, this study investigates an alternative source as an economical and environmental replacement for diesel gensets that can reduce GHG emissions and ensure system reliability. A MEG is developed in this paper to support a considerably large-scale electric and thermal demand at Ontario Tech University (UOIT). Different sizes of diesel gensets and RESs, such as solar, wind, hydro, and biomass, are combined in the MEG for off-grid applications. To evaluate diesel gensets’ competency, the diesel genset is substituted by an emission-free generation source named microreactor (MR). The fossil-fired MEG and MR-based MEG are optimized by an intelligent optimization technique, namely particle swarm optimization (PSO). The objective of the PSO is to minimize the net present cost (NPC). The simulation results show that MR-based MEG could be an excellent replacement for a diesel genset in terms of NPC and selected key performance indicators (KPIs). A comprehensive sensitivity analysis is also carried out to validate the simulation results.

In-situ regeneration of activated carbon with electric potential swing desorption (EPSD) for the H2S removal from biogas

In-situ regeneration of a granular activated carbon was conducted for the first time using electric potential swing desorption (EPSD) with potentials up to 30 V. The EPSD system was compared against a standard non-potential system using a fixed-bed reactor with a bed of 10 g of activated carbon treating a gas mixture with 10,000 ppm H₂S. Breakthrough times, adsorption desorption volume, capacities, effect of regeneration and desorption kinetics were investigated. The analysis showed that desorption of H₂S using the new EPSD system was 3 times quicker compared with the no potential system. Hence, physical adsorption using EPSD over activated carbon is efficient, safe and environmental friendly and could be used for the in-situ regeneration of granular activated carbon without using a PSA and/or TSA system. Additionally, adsorption and desorption cycles can be obtained with a classical two column system, which could lead towards a more efficient and economic biogas to biomethane process.