A co-production of sugars, lignosulfonates, cellulose, and cellulose nanocrystals from ball-milled woods

High-Energy Milling as a Pre-Treatment Alternative for Lignocellulosic Fibers Derived from Brewer's Spent Grain

The objective of this study was to evaluate how high-energy milling affects the structural, thermal, and morphological properties of brewer's spent grain fibers over time. The researchers determined the chemical composition of the samples using TAPPI techniques, particle size analysis, Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and X-ray diffraction (XRD). The samples displayed distinct morphologies and particle sizes depending on the treatment duration. The sample treated for 120 min (T120) showed the smallest particle size (19.4 µm). FTIR spectra revealed that the mechanical treatment strongly disrupted the structure of hemicellulose. The thermal stability of the samples decreased because of the applied treatment. Mechanical milling also fully eliminated the crystalline structure of cellulose in the samples. These findings indicate that high-energy milling holds strong potential as a pre-treatment method for the valorization of lignocellulosic residues.

Employing algal biomass for fabrication of biofuels subsequent to phytoremediation

An alga belongs to the multi-pertinent group which can add to a significant sector of environment. They show a prevailing gathering of microorganisms for bioremediation due to their significant capacity to inactivate toxic heavy metals. It can easily absorb or neutralize the toxicity of heavy metals from water and soil through phytoremediation. Biosorption is a promising innovation that focuses on novel, modest, and exceptionally successful materials to apply in phytoremediation technology. Furthermore, algal biomass can be used for biofuel generation after phytoremediation using thermochemical or biological transformation processes. The algal components get affected by heavy metals during phytoremediation, but with the help of different techniques, these are yield efficient. The extreme lipid and mineral substances of microalgae have been proven helpful for biofuel manufacturing and worth extra products. Biofuels produced are bio-oil, biodiesel, bioethanol, biogas, etc. The reuse capability of algae can be utilized toward ecological manageability and economic facility. In this review article, the reuse and recycling of algal biomass for biofuel production have been represented. This novel technique has numerous benefits and produces eco-friendly and economically beneficial products.

Lytic polysaccharide monooxygenases as powerful tools in enzymatically assisted preparation of nano-scaled cellulose from lignocellulose: A review

Nanocellulose, either in the form of fibers or crystals, constitutes a renewable, biobased, biocompatible material with advantageous mechanical properties that can be isolated from lignocellulosic biomass. Enzyme-assisted isolation of nanocellulose is an attractive, environmentally friendly approach that leads to products of higher quality compared to their chemically prepared counterparts. Lytic polysaccharide monooxygenases (LPMOs) are enzymes that oxidatively cleave the β-1,4-glycosidic bond of polysaccharides upon activation of O₂ or H₂O₂ and presence of an electron donor. Their use for treatment of cellulose fibers towards the preparation of nano-scaled cellulose is related to the ability of LPMOs to create nicking points on the fiber surface, thus facilitating fiber disruption and separation. The aim of this review is to describe the mode of action of LPMOs on cellulose fibers towards the isolation of nanostructures, thus highlighting their great potential for the production of nanocellulose as a novel value added product from lignocellulose.

Cellulose nanocrystals in cancer diagnostics and treatment

Cancer is currently a major threat to public health, being among the principal causes of death to the global population. With carcinogenesis mechanisms, cancer invasion, and metastasis remaining blurred, cancer diagnosis and novel drug delivery approaches should be developed urgently to enable management and treatment. A dream break-through would be a non-invasive instantaneous monitoring of cancer initiation and progression to fast-track diagnosis for timely specialist treatment decisions. These innovations would enhance the established treatment protocols, unlimited by evasive biological complexities during tumorigenesis. It is therefore contingent that emerging and future scientific technologies be equally biased towards such innovations by exploiting the apparent properties of new developments and materials especially nanomaterials. CNCs as nanomaterials have undisputable physical and excellent biological properties that enhanced their interest as biomedical materials. This article therefore highlights CNCs utility in cancer diagnosis and therapy. Their extraction, properties, modification, in-vivo/in-vitro medical applications, biocompatibility, challenges and future perspectives are precisely discussed.

Preparation and characterization of spherical cellulose nanocrystals with high purity by the composite enzymolysis of pulp fibers

The spherical cellulose nanocrystals (CNCs) with high purity were prepared, the processes included composite enzymolysis of pulp fibers and the purification of product. The impurities in the crude product CNCs were analyzed with FTIR, coomassie brilliant blue-G250 and ionic chromatography. The pure CNCs were characterized with SEM, XRD, DLS and TGA. The results indicated that the crude CNCs was flocculated and washed twice with a dilute acid solution (pH = 2) to get pure spherical CNCs, the purity was approximate 99.99%. The obtained pure spherical CNCs had a narrow particle size distribution with diameter 15-40 nm. FTIR and XRD analyses proved that the crystal phase of the spherical CNCs did not change, but the crystallinity decreased slightly compared with pulp fibers. The thermal degradation showed that the spherical CNCs had better thermal stability than one from other methods, and the temperature of maximum weight loss rate (T_max) was 329.2 °C.

Ball milling: a green technology for the preparation and functionalisation of nanocellulose derivatives

Ball milling is a simple, fast, cost-effective green technology with enormous potential. One of the most interesting applications of this technology in the field of cellulose is the preparation and the chemical modification of cellulose nanocrystals and nanofibers. Although a number of studies have been reported in the literature, the potential of this technique in the field of cellulose nanoparticles has not been fully exploited. This minireview aims at putting existing work into perspective, highlighting the significance and the potential of this green, sustainable technique to facilitate the identification of areas of future development.

Disruption of lignocellulosic biomass along the length of the screws with different screw elements in a twin-screw extruder

Proper screw design is crucial for effectively pre-treating wood fibers, to assist in the downstream enzymatic conversion of the cellulose into fermentable sugars. Initially, the impact of extruder barrel temperature (50, 100, and 150 °C) and screw speed (25, 50, and 75 rpm) were studied to arrive at the optimum conditions for sugar yield. Lower temperatures and screw speeds resulted in increased sugar yields. To examine the influence of shear imparted by the screws, the residuals samples were recovered from different zones along the screws and evaluated. Sugar yield, crystallinity index, and the particle size distribution of the material collected at different zones were determined. Glucose yield and xylose/mannose yields of the material along the screws, ranged from 23.25 to 42.88% and from 11.95 to 20.54%, respectively. The importance of the screw design was highlighted.

Pretreatment with lower feed moisture and lower extrusion temperatures aids in the increase in the fermentable sugar yields from fine-milled Douglas-fir

The impact of independent variables of extrusion on dependent variables of pre-milled Douglas-fir forest residuals was studied to enhance the enzymatic hydrolysis for production of fermentable sugar without catalysts. Co-rotating twin screw extruder was operated with three different feedstock moisture contents (30, 40, and 50%) at four different barrel temperatures (25, 50, 100, and 150 °C) as a pretreatment. The specific mechanical energy input ranged from 0.07 and 0.30 kWh/kg and had a very strong positive correlation with torque (r = 0.96, p < 0.01), glucose (r = 0.92, p < 0.01) and xylose/mannose yields with (r = 0.84, p < 0.01). Douglas-fir residuals extruded at lowest moisture content (30%) and temperature (25 °C) had the highest sugar yield, requiring the highest SME. Higher barrel temperature increased the median particle size and had lower glucose and xylose/mannose yields. Recrystallization and agglomeration were observed under higher temperature conditions.

Enhanced hydrolysis of mechanically pretreated cellulose in water/CO2 system

The aim of this work was to study promotion of ball milling and CO₂ assistance on cellulose hydrolysis kinetics in water medium. Kinetic behaviors were analyzed based on first-order and shrinking core models. The results showed that cellulose hydrolysis is enhanced by ball milling and CO₂ assistance. Ball milling reduced crystallinity and particle size of cellulose, resulting in high cellulose conversion, while hydrolysis promoted by CO₂ assistance was weaker. Double-layer hydrolysis was observed for ball-milled cellulose, and rate constant in active layer is higher. Based on double-layer shrinking core model (DL-SCM), activation energy of cellulose conversion decreased from 73.6 to 39.8 kJ/mol when ball milling and CO₂ assistance were applied. Hydrolysis active layer was about 0.9 μm, representing activated thickness of ball-milled cellulose. Hydrolysis promotion by crystallinity and particle size reduction was distinguished via DL-SCM, and crystal evolution possesses greater improvement than particle size decrease on hydrolysis of ball-milled cellulose.

Increased sugar yield from pre-milled Douglas-fir forest residuals with lower energy consumption by using planetary ball milling

Impact of planetary ball milling on pre-milled wood fiber was studied to improve efficiency of energy consumption for bioconversion using post-harvest forest residuals. Crystalline cellulose decreased from 40.73% to 11.70% by ball milling. Crystallinity index of ball milled wood samples had a negative correlation with glucose yield (r = -0.97, p < .01), xylose/mannose (r = -0.96, p < .01), and a positive correlation with median particle size (r = 0.77, p < .01). Range of glucose yield and xylose/mannose yield for ball milled samples was found to be 24.45-59.67% and from 11.92% to 23.82%, respectively. Morphological changes of the lignocellulosic biomass were observed; the compact fiber bundles of the forest residuals were cleaved to smaller particles with lower aspect ratio with increasing intensity of ball milling. The required energy ranged from 0.50 to 2.15 kWh/kg for 7-30 min of milling respectively.