Natural plant extracts as an economical and ecofriendly alternative for harvesting microalgae

Harvesting of microalgae using Saccharum officinarum bagasse: characterization, process optimization, and evaluation of harvesting potential

In microalgae downstream processing, biomass harvesting is a key step that requires a huge amount of energy. Microalgae harvesting can directly influence the microalgal biomass industry for its wide applications. In the present work, sugarcane bagasse (SB) was investigated as a plant waste-derived flocculant for harvesting microalgae. The SB with 40mg/L exhibited harvesting efficiency (HE) of 93.6% and 89.48% at pH 7.5 and 9.5, respectively. SB showed a negative surface charge, indicating that the flocculation mechanism in the present study is not primarily through charge neutralization. Elemental analysis of harvested biomass showed the presence of 27.07% of carbon, 6.83% of hydrogen, and 5.86% of nitrogen. Overall, results indicate the possible utility of SB as low-cost eco-friendly plant-based waste material for mixed microalgae harvesting. FTIR (Fourier-transform infrared), Zeta potential, SEM (scanning electron microscope), and EDX (energy-dispersive X-ray) analysis were performed to assess the characteristics of SB and mechanism of harvesting. The FTIR spectrum analysis of SB revealed the presence of multiple functional groups indicating their possible role in flocculation by bridging mechanisms. The SB has promising potential to be used at a demonstration scale for microalgae harvesting for various applications.

Achieving a Biocircular Economy in the Aquaculture Sector Through Waste Valorization

Aquaculture wastewater treatment not only assists in alleviating the scarcity of clean water for daily usage and environmental pollution, but also generates valuable byproducts. This paper aims to review the generation of wastewater from the aquaculture sector, its characteristics, and available treatment technologies, while comprehensively discussing the adoption of a biocircular economy approach through waste valorization. With rich nutrients, such as nitrogenous compounds, and the presence of phosphorus in the aquaculture effluent, these aspects could be explored and valorized into biofertilizers, broadening their application in aquaponics and hydroponics, as well as in algae and daphnid cultivation. Biofertilizer can also be used in agriculture because it contains essential elements needed by plants. Thus, methods of converting nutrients into biofertilizers in terms of sludge recovery can be accomplished via anaerobic and aerobic digestion, drying, composting, and vermicomposting. Moving forward, aquaculture effluent recovery is addressed under the biocircular economy by re-engaging aquaculture wastewater effluents into the production cycle. The enhancement of aquaculture effluents and biomass for uses such as aquaponics, hydroponics, algae cultivation, daphnid co-cultivation, and biofertilizers presents valuable opportunities for nutrient recovery while ensuring that non-toxic wastewater can be safely discharged into external water bodies. This approach has the potential to revolutionize wastewater treatment in aquaculture, shifting the economic model of wastewater management from a linear system to a circular, more sustainable one.

Trilogy of comprehensive treatment of kitchen waste by bacteria-microalgae-fungi combined system: Pretreatment, water purification and resource utilization, and biomass harvesting

Given its profound disservice, a bacteria-microalgae-fungi combined system was designed to treat kitchen waste. Firstly, a new type of microbial agent homemade compound microorganisms (HCM) (composed of Serratia marcescens, Bacillus subtilis and other 11 strains) with relatively high bio-security were developed for pretreating kitchen waste, and HCM efficiently degraded 85.2 % cellulose, 94.3 % starch, and 59.0 % oil. HCM also accomplished brilliantly the initial nutrients purification and liquefaction conversion of kitchen waste. Under mono-culture mode (fungi and microalgae were inoculated separately in the pre - and post-stages) and co-culture mode (fungi and microalgae were inoculated simultaneously in the early stage), microalgae-fungi consortia were then applied for further water purification and resource utilization of kitchen waste liquefied liquid (KWLL) produced in the pretreatment stage. Two kinds of microalgae-fungi consortia (Chlorella sp. HQ and Chlorella sp. MHQ2 form consortia with pellet-forming fungi Aspergillus niger HW8-1, respectively) removed 79.5-83.0 % chemical oxygen demand (COD), 44.0-56.5 % total nitrogen (TN), 90.3-96.4 % total phosphorus (TP), and 64.9-71.0 % NH4+-N of KWLL. What's more, the microalgae-fungi consortia constructed in this study accumulated abundant high-value substances at the same time of efficiently purifying KWLL. Finally, in the biomass harvesting stage, pellet-forming fungi efficiently harvested 81.9-82.1 % of microalgal biomass in a low-cost manner through exopolysaccharides adhesion, surface proteins interaction and charge neutralization. Compared with conventional microalgae-bacteria symbiosis system, the constructed bacteria-microalgae-fungi new-type combined system achieves the triple purpose of efficient purification, resource utilization, and biomass recovery on raw kitchen waste through the trilogy strategy, providing momentous technical references and more treatment systems selection for future kitchen waste treatment.

Investigating flocculation mechanisms and ecological safety of cationic guar gum for rapid harvesting of microalgal cells

Addressing the drawbacks of traditional flocculants on microalgae biomass harvesting is crucial for large-scale industrial applications of microalgae production. In this study, cationic bioflocculant was successfully prepared by introducing cationic groups into the side chain of guar gum, achieving in-situ algae flocculation efficiency of 83.5 % with the dosage of 18.0 mg/L under pH = 10.0. Through a harmonious integration of predictive modelling and practical experimentation, a superior cell flocculation capacity of 23.5 g/g was achieved. In addition, the environmental safety and biocompatibility of cationic guar gum was assessed, using the typical suspension quantitative bacteriostatic method and the fluorescent double-staining technique. The results showed that the inhibition efficiency of Staphylococcus aureus in the system containing 60.0 mg/L cationic guar gum was only 12.0 % and there was no inhibition against Escherichia coli colonies. These findings provide a safe and green flocculant for efficient microalgae harvesting and spent medium treatment.

Hydroponics with Microalgae and Cyanobacteria: Emerging Trends and Opportunities in Modern Agriculture

The global population is expected to reach 9.5 billion, which means that crop productivity needs to double to meet the growing population's food demand. Soil degradation and environmental factors, such as climate events, significantly threaten crop production and global food security. Furthermore, rapid urbanization has led to 55% of the world's population migrating to cities, and this proportion is expected to increase to 75% by 2050, which presents significant challenges in producing staple foods through conventional hinterland farming. Numerous studies have proposed various sustainable farming techniques to combat the shortage of farmable land and increase food security in urban areas. Soilless farming techniques such as hydroponics have gained worldwide popularity due to their resource efficiency and production of superior-quality fresh products. However, using chemical nutrients in a conventional hydroponic system can have significant environmental impacts, including eutrophication and resource depletion. Incorporating microalgae into hydroponic systems as biostimulants offers a sustainable and ecofriendly approach toward circular bioeconomy strategies. The present review summarizes the plant growth-promoting activity of microalgae as biostimulants and their mechanisms of action. We discuss their effects on plant growth parameters under different applications, emphasizing the significance of integrating microalgae into a closed-loop circular economy model to sustainably meet global food demands.

Biocompounds from wastewater-grown microalgae: a review of emerging cultivation and harvesting technologies

Microalgae biomass has attracted attention as a feedstock to produce biofuels, biofertilizers, and pigments. However, the high production cost associated with cultivation and separation stages is a challenge for the microalgae biotechnology application on a large scale. A promising approach to overcome the technical-economic limitations of microalgae production is using wastewater as a nutrient and water source for cultivation. This strategy reduces cultivation costs and contributes to valorizing sanitation resources. Therefore, this article presents a comprehensive literature review on the status of microalgae biomass cultivation in wastewater, focusing on production strategies and the accumulation of valuable compounds such as lipids, carbohydrates, proteins, fatty acids, and pigments. This review also covers emerging techniques for harvesting microalgae biomass cultivated in wastewater, discussing the advantages and limitations of the process, as well as pointing out the main research opportunities. The novelty of the study lies in providing a detailed analysis of state-of-the-art and potential advances in the cultivation and harvesting of microalgae, with a special focus on the use of wastewater and implementing innovative strategies to enhance productivity and the accumulation of compounds. In this context, the work aims to guide future research concerning emerging technologies in the field, emphasizing the importance of innovative approaches in cultivating and harvesting microalgae for advancing knowledge and practical applications in this area.

Technologies for harvesting the microalgae for industrial applications: Current trends and perspectives

Microalgae are emerging as a promising source for augmenting the supply of essential products to meet global demands in an environmentally sustainable manner. Despite the potential benefits of microalgae in industry, the high energy consumption for harvesting remains a significant obstacle. This review offers a comprehensive overview of microalgae harvesting technologies and their industrial applications, with particular emphasis on the latest advances in flocculation techniques. These cutting-edge methods have been applied to biodiesel production, food and nutraceutical processing, and wastewater treatment. Large-scale harvesting is still severely impeded by the high cost despite progress has been made in laboratory studies. In the future, cost-effective microalgal harvesting will rely on efficient resource utilization, including the use of waste materials and the reuse of media and flocculants. Additionally, precise regulation of biological metabolism will be necessary to overcome algal species-related limitations through the development of extracellular polymeric substance-induced flocculation technology.

Potential of biogenic and non-biogenic waste materials as flocculant for algal biomass harvesting: Mechanism, parameters, challenges and future prospects

In this review article, waste materials (biogenic/non-biogenic) are focused as the flocculants for harvesting of algal biomass. Chemical flocculants are widely utilized for the effective harvesting of algal biomass at a commercial scale while the high cost is a major drawback. The waste materials-based flocculants (WMBF) are started to utilize as one of the cost-effective performance for dual benefits of waste minimization and reuse for sustainable recovery of biomass. The novelty of the article is articulated with the objective that presents an insight of WMBF, classification of WMBF, preparation methods of WMBF, mechanisms of flocculation, factors affecting flocculation-mechanism, challenges and future recommendations that are required for harvesting of algae. The WMBF are shown similar flocculation mechanisms and flocculation efficiencies as chemical flocculants. Thus, the utilization of waste material for the flocculation process of algal cells minimizes the waste load into the environment and transforms the waste materials into valuable resources.

Integrated electrocoagulation-flotation of microalgae to produce Mg-laden microalgal biochar for seeding struvite crystallization

Developing sustainable materials for recovering and recycling nutrients from wastewater is critically needed for nutrients such as phosphorus that have a diminishing supply. Struvite crystallization is emerging as a promising strategy for phosphorus recovery which can be enhanced with seeding through microalgal biochar. The main bottleneck of using microalgae is its high harvesting cost. In this study, an integrated electrocoagulation-flotation (ECF) process is used to recover and at the same time modify the algal surface with magnesium anode and inert carbon cathode. Harvesting efficiency of 98% was achieved with 40.78 mA cm⁻², 0.5 cm inter-electrode distance and energy consumption of 4.03 kWh kg⁻¹ in 15 min. The harvested microalgae were pyrolyzed to obtain a yield of 52.90% Mg-laden microalgal biochar. Simultaneously, surface impregnation of 28% magnesium was attained as confirmed by Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Phosphorus recovery and struvite yield of 93.70% and 2.66 g L⁻¹, respectively, were obtained from dosing 1.50 g L⁻¹ Mg-laden microalgal biochar. Comparison of physicochemical characteristics of residual supernatant after microalgal harvesting and struvite recovery showed that the combined use of both the residuals can serve as a sustainable growth medium for microalgae. The overall operating cost of the integrated process was found to be 2.48 USD kg⁻¹ with a total energy consumption of 10.76 kWh kg⁻¹, which was found to be lower than conventional harvesting unit processes such as centrifugation and filtration. This novel approach can help attaining a circular bioeconomy by encompassing nutrient recovery and waste management in an integrated process.

Exploring the extraction methods for plant-based coagulants and their future approaches

The application of plant-based coagulants in wastewater treatment has increasingly progressed in the coagulation-flocculation process toward green economy and cleaner production. Plant-based coagulants have a potential as essential substitutes for commercially used chemical coagulants because of their natural characteristics and biodegradability. Chemical coagulants leave residues in treated water and generated sludge, which cause harm to human health and the ecosystem. Thus, the exploration of plant-based coagulants in wastewater treatment could reduce and eliminate the potential damage of chemical coagulants and promote the alternative approach for sustainable environment. The general processing steps of the end-to-end plant-based coagulant production, which includes primary, secondary, and tertiary stages, are discussed. However, this review focuses more on the extraction process using different solutions and compares the performance of different coagulants in removal activities after effluent treatment. Discussion on the arising challenges is elaborated, and approaches for plant-based coagulant research in the near future are suggested.

Mixed Contaminants: Occurrence, Interactions, Toxicity, Detection, and Remediation

The ever-increasing rate of pollution has attracted considerable interest in research. Several anthropogenic activities have diminished soil, air, and water quality and have led to complex chemical pollutants. This review aims to provide a clear idea about the latest and most prevalent pollutants such as heavy metals, PAHs, pesticides, hydrocarbons, and pharmaceuticals—their occurrence in various complex mixtures and how several environmental factors influence their interaction. The mechanism adopted by these contaminants to form the complex mixtures leading to the rise of a new class of contaminants, and thus resulting in severe threats to human health and the environment, has also been exhibited. Additionally, this review provides an in-depth idea of various in vivo, in vitro, and trending biomarkers used for risk assessment and identifies the occurrence of mixed contaminants even at very minute concentrations. Much importance has been given to remediation technologies to understand our current position in handling these contaminants and how the technologies can be improved. This paper aims to create awareness among readers about the most ubiquitous contaminants and how simple ways can be adopted to tackle the same.

Experimental and modelling studies of convective and microwave drying kinetics for microalgae

Conventional microalgal drying consumes huge time and contributes to 60-80% of downstream process costs. With the aim to develop an effective and rapid drying process, the present study evaluated the performance of microwave based drying (MWD) with a power range of 360-900 W and compared with the conventional oven drying (OD) at 40-100 °C. MWD was found to be efficient due to uniform and volumetric heating because of dipolar interaction, with an effective diffusivity of 0.47 × 10^-9-1.63 × 10^-9 m² s^-1, comparatively higher than OD. Activation and specific energy of 32.43 W g^-1 and 42.9-56.07 kWh kg^-1 was projected respectively, and a falling rate period with best fit for Newton and Henderson-Pabis model was observed for MWD. Uniform heating from internal sub-surface avoided cell distress, resulting in 14.4% higher lipid yield and significant preservation of biochemical components that can be processed into bioenergy and valuable products in microalgal biorefinery.

Microalgal bio-flocculation: present scenario and prospects for commercialization

The need for sustainable production of renewable biofuel has been a global concern in the recent times. Overcoming the tailbacks of the first- and second-generation biofuels, third-generation biofuel using microalgae as feedstock has emerged as a plausible alternative. It has an added advantage of preventing any greenhouse gas (GHG) emissions with simultaneous carbon dioxide sequestration. Dewatering of microalgal culture is one of the many concerns regarding industrial-scale biofuel production. The small size of microalgae and dilute nature of its growth cultures creates huge operational cost during biomass separation, limiting economic feasibility of algae-based fuels. Considering the recovery efficiency, operation economics, technological feasibility and cost-effectiveness, bio-flocculation is a promising method of harvesting. Moreover, advantage of bio-flocculation over other conventional methods is that it does not incur the addition of any external chemical flocculants. This article reviews the current status of bio-flocculation technique for harvesting microalgae at industrial scale. The various microbial strains that can be prospective bioflocculants have been reviewed along with its application and advantages over chemical flocculants. Also, this article proposes that the primary focus of an appropriate harvesting technique should depend on the final utilization of the harvested biomass. This review article attempts to bring forth the beneficial aspects of microbial aided microalgal harvesting with a special attention on genetically modified self-flocculation microalgae.

Harvesting freshwater algae with tannins from the bark of forest species: Comparison of methods and pelletization of the biomass obtained

Toxic cyanobacteria growth rates have increased in recent decades due to climate change and human activities. Microalgae, with their ability to produce a large amount of biomass, are considered as a source of energy that can be used to produce biofuels. The aim of this study is to test four different microalgae harvesting methods (sedimentation, coagulation-flocculation, pH variation, and centrifugation) in order to find which is best suited to the A Baxe reservoir, which has been suffering from cyanobacterial blooms in recent years. Centrifugation proved the most efficient method (85.74%-1790 RCF), but it can induce cell rupture. Natural sedimentation and pH variation obtained similar results at 49.36% and 49.02% respectively. Although all four methods have advantages, our results reveal that coagulation-flocculation, using 10 mg/L of Pinus pinaster, results in a removal efficiency of 68.10%, making it the most suitable method, though with 20 mg/L the performance was lower (66.03%). To minimise environmental waste, the microalgae removed were then transformed into pellets to be used as biofuel, with a higher heating value (HHV) of 21,196.96 ± 1602.33 kJ/kg. The pellets obtained from the microalgae residue did not meet all the requirements for use as biofuels, but microalgae biomass could be mixed with other sources and therefore looks like a promising option for the future.

Flocculation performance and mechanism of fungal pellets on harvesting of microalgal biomass

In this study, a bioflocculation method assisted by fungal pellets was developed for highly efficient microalgae harvesting. Effects of critical parameters, including flocculation type, temperature, rotation speed and initial pH, on the bioflocculation of fungal Aspergillus niger for microalgae Scenedesmus sp. were investigated. Results showed that the maximum flocculation efficiency of 99.4% was obtained when the fungal pellets were inoculated in the algal solution at the initial pH of 8.0, temperature of 30 °C and rotation speed of 160 rpm for 48 h in BG-11 medium. Furthermore, microscopy examination, scanning electron microscopy, Fourier transform infrared spectroscopy, Zeta potential measurement and three-dimensional excitation emission matrix fluorescence spectroscopy were used to explore the mechanism of bioflocculation process. It was found that the interaction of fungi and microalgae was related to the surface functional groups of fungal pellets. This study provides a interpretation of conceivable mechanism for microalgal bioflocculation by fungal pellets.

Green coagulants recovering Scenedesmus obliquus: An optimization study

The recovery of microalgae by means of coagulation-flocculation is efficient, simple and low operating costs. The addition of coagulants makes it possible to destabilize the microalgae surface loads and recover their biomass. Chemical coagulants can contaminate the environment and negatively affect human health. Thus, the exploration of natural coagulants, such as Moringa oleifera and Guazuma ulmifolia, are innovative. Thus, this study aimed to evaluate the efficiency of biomass separation from the microalgae Scenedesmus obliquuos by means of coagulation-flocculation. M. oleifera and G. ulmifolia were used in order to optimize the variables dose, pH and settling time, through a central composite rotational design, which presented recovery efficiencies above 80.0% and 60.0%, respectively. In relation to M. oleifera, optimum regions were obtained for biomass recovery at both pH 4.0 with a dose of 40.0 mg L^-1 and pH 9.0 with a dose of 80.0 mg L^-1, both in 30 min of settling times. For G. ulmifolia, an optimum dose of 30.0 mg L^-1 at pH 4.0 with a 3 min settling time demonstrated that this new coagulant for microalgae recovery has potential for application. Thus, these natural coagulants are promising and can be used in coagulation-flocculation to recover biomass from Scenedesmus obliquuos and, thus, minimize the use of synthetic or metallic products.

Evaluating the harvesting efficiency of inorganic coagulants on native microalgal consortium enriched with human urine

Flocculation is a common technique to harvest microalgae, where the negatively charged algal cells coalesce together to form larger flocs that settle under gravity. Although several inorganic flocculants have been applied for algal biomass recovery, the dosage varies depending on the algal strain-specific features. Thus, the selection of inorganic coagulant that can be applied at a low dosage for achieving the maximal biomass recovery under normal physiological conditions is necessary. The present study analyses the influence of different inorganic flocculants like ferric chloride (FeCl₃), alum, calcium hydroxide, ferrous sulphate and copper sulphate on the biomass removal efficiency of a mixed microalgal consortium isolated from the open ponds of the National Institute of Technology Rourkela and further enriched with diluted human urine. Flocculation experiments were carried out with varying coagulant dosages, pH between 7.5 and 7.8, and 0.5 g L^-1 algal concentration. The results revealed that FeCl₃ at the dosage of 0.05 g L^-1 and KAl(SO₄)₂ with the dosage of 0.04 g L^-1 could be utilized to achieve the biomass recovery efficiency of 99.5% and 97.9%, respectively, within a duration of 5 min. An economic evaluation of the harvesting process showed KAl(SO₄)₂ to be the cheapest coagulant that could be feasibly used to recover algae at a large scale.

Insight on Extraction and Characterisation of Biopolymers as the Green Coagulants for Microalgae Harvesting

This review presents the extractions, characterisations, applications and economic analyses of natural coagulant in separating pollutants and microalgae from water medium, known as microalgae harvesting. The promising future of microalgae as a next-generation energy source is reviewed and the significant drawbacks of conventional microalgae harvesting using alum are evaluated. The performances of natural coagulant in microalgae harvesting are studied and proven to exceed the alum. In addition, the details of each processing stage in the extraction of natural coagulant (plant, microbial and animal) are comprehensively discussed with justifications. This information could contribute to future exploration of novel natural coagulants by providing description of optimised extraction steps for a number of natural coagulants. Besides, the characterisations of natural coagulants have garnered a great deal of attention, and the strategies to enhance the flocculating activity based on their characteristics are discussed. Several important characterisations have been tabulated in this review such as physical aspects, including surface morphology and surface charges; chemical aspects, including molecular weight, functional group and elemental properties; and thermal stability parameters including thermogravimetry analysis and differential scanning calorimetry. Furthermore, various applications of natural coagulant in the industries other than microalgae harvesting are revealed. The cost analysis of natural coagulant application in mass harvesting of microalgae is allowed to evaluate its feasibility towards commercialisation in the industrial. Last, the potentially new natural coagulants, which are yet to be exploited and applied, are listed as the additional information for future study.

A comprehensive review on cultivation and harvesting of microalgae for biodiesel production: Environmental pollution control and future directions

Biodiesel is one of the best promising candidates in response to the energy crisis, since it has the capability to minimize most of the environmental problems. Microalgae, as the feedstock of third-generation biodiesel, are considered as one of the most sustainable resources. However, microalgae production for biodiesel feedstock on a large scale is still limited, because of the influences of lipid contents, biomass productivities, lipid extraction technologies, the water used in microalgae cultivation and processes of biomass harvesting. This paper firstly reviews the recent advances in microalgae cultivation and growth processes. Subsequently, current microalgae harvesting technologies are summarized and flocculation mechanisms are analyzed, while the characteristics that the ideal harvesting methods should have are summarized. This review also summarizes the environmental pollution control performances and the key challenges in future. The key suggestions and conclusions in the paper can offer a promising roadmap for the cost-effective biodiesel production.