Complete recovery of cellulose from rice straw pretreated with ethylene glycol and aluminum chloride for enzymatic hydrolysis

Thermodynamic modeling of freeze pretreatment in the destruction of rice straw structure combined with alkaline-hydrothermal method for enzymatic hydrolysis

Freeze pretreatment combined with alkaline-hydrothermal method of rice straw for enzymatic hydrolysis was studied. Crystallization stress in the rice stem pores caused by water freezing at -20- -40 °C was modeled to illustrate the destruction mechanism. The stress was calculated as 22.5-38.3 MPa that were higher than the tensile yield stress of untreated stems (3.0 MPa), indicating ice formation damaging pore structure. After freeze at -20 °C, rice straw was further hydrothermally treated at 190 °C with 0.4 M Na2CO3, achieving 72.0 % lignin removal and 97.2 % cellulose recovery. Glucose yield rose to 91.1 % by 4.3 times after 24 h hydrolysis at 10 FPU loading of Cellic®CTec2 cellulase. The specific surface area of rice straw was 2.6 m2/g increased by 1.2 times after freeze. Freeze combined with alkaline-hydrothermal treatment is a green and energy-efficient method for improving enzymatic hydrolysis.

Co-production of fermentable sugars and highly active lignin from eucalyptus via a mild preprocessing with diethylene glycol and chromic chloride

Eucalyptus was pretreated with diethylene glycol catalyzed by 0.02 mol/L CrCl3 for 10 min, resulting in 91 % delignification and 98 % cellulose recovery, with trace fermentation inhibitors generated. After the mild pretreatment, the accessibility and affinity of cellulase to eucalyptus was enhanced, especially since enzyme adsorption rate increased by 1.6-fold. Therefore, glucose yield of pretreated eucalyptus was 7.9-fold higher than that of untreated eucalyptus after hydrolyzed 48 h, in which the maximum glucose concentration reached 62 g/L from eucalyptus by adding Tween 80. According to the characterization analysis, the structure of the eucalyptus lignin-carbohydrate complexes structure was destroyed during the pretreatment, while lignin fragments was likely reacted with diethylene glycol to form the stabilized aromatic ethers. Moreover, the extracted Deg-lignin exhibited better performances than commercial alkali lignin such as higher fluorescence intensity, less negative surface charge, and lower particle size. The mild pretreatment method with diethylene glycol and CrCl3 provided a promising approach for co-production of fermentable sugars and high activity lignin from lignocellulosic biomass.

Synergism of jet milling and deep eutectic solvent pretreatment on grapevine lignin fractionation and enhancing enzymatic hydrolysis

Herein, we investigated the synergistic effects of jet milling (JM) and deep eutectic solvent (DES) pretreatment on the fractionation of grapevine lignin and the consequent enhancement of enzymatic hydrolysis. Grapevine, a substantial byproduct of the wine industry, was subjected to JM pretreatment to produce finely powdered particles (median diameter D50 = 98.90), which were then further treated with acidic ChCl-LA and alkaline K2CO3-EG DESs. The results revealed that the combined JM + ChCl-LA pretreatment significantly increased the cellulose preservation under optimal conditions (110 °C, 4 h, and 20 % water content), achieving removal rates of 74.18 % xylan and 66.05 % lignin, respectively. The pretreatment temperature and inhibitor production were reduced, resulting in a remarkable threefold increase in glucose yield compared to untreated samples. Moreover, the structural analysis of the pretreated lignin indicated an enrichment of phenolic units, leading to enhanced antioxidant and antibacterial activities, particularly in the JM pretreated samples. These findings underscore the promising potential of the synergistic JM and DES pretreatment in facilitating the efficient utilization of grapevine lignocellulosic biomass for sustainable biorefinery technologies.

Extraction of super high-yield lignin-carbohydrate complexes from rice straw without compromising cellulose hydrolysis

Lignin-carbohydrate complexes (LCC) that exhibit both structural advantages of lignin and carbohydrates are promising amphiphilic biopolymers, but the extraction is challenged by its liable chemical bond cleavage between lignin and carbohydrates. This work proposed a facile chemical route to integrating the production of water-insoluble (WIS LCC) and water-soluble LCC (WS LCC) into the emerging deep eutectic solvent (DES) biorefinery at mild conditions. The tailored mechanochemical fractionation process of ball milling assisted aqueous alkaline DES could extract 24.2 % LCC in total, with the co-production of a highly hydrolysable cellulose fraction (98.7 % glucose conversion). The resulting LCC exhibited considerably high contents of β-O-4, phenyl glycoside, and ferulic acid linkage bonds. When 100 g starting straw was subjected to this technique route, 9.1 g WIS LCC, 15.1 g WS LCC and 45.5 g glucose were cascaded produced. It was proposed that the selective disruption of hydrogen bonding entangled network and the quasi-state dissolution of the whole biomass allowed the subsequent cascade fractionation of WIS LCC, WS LCC and highly hydrolysable cellulose through solution property adjustment. This work showed a promising approach for LCC production with high yield without compromising cellulose conversion potential, which has been challenging in the current lignocellulose biorefinery.

Organosolv pretreatment: an in-depth purview of mechanics of the system

The concept of biorefinery has been advancing globally and organosolv pretreatment strategy has seen an upsurge in research due to its efficiency in removing the recalcitrant lignin and dissolution of cellulose. The high-performance organosolv system uses green solvents and its reusability contributes concurrently to the biorefinery sector and sustainability. The major advantage of the current system involves the continuous removal of lignin to enhance cellulose accessibility, thereby easing the later biorefinery steps, which were immensely restricted due to the recalcitrant lignin. The current system process can be further explored and enhanced via the amalgamation of new technologies, which is still a work in progress. Thus, the current review summarizes organosolv pretreatment and the range of solvents used, along with a detailed mechanistic approach that results in efficient pretreatment of LCB. The latest developments for designing high-performance pretreatment systems, their pitfalls, and advanced assessments such as Life Cycle Assessment along with Techno-Economic Assessment have also been deliberated to allow an insight into its diverse potential applicability towards a sustainable future.

Glycolic acid-based deep eutectic solvents boosting co-production of xylo-oligomers and fermentable sugars from corncob and the related kinetic mechanism

BACKGROUND

Xylo-oligomers are a kind of high value-added products in biomass fractionation. Although there are several chemical methods to obtain xylo-oligomers from biomass, the reports about the deep eutectic solvents (DESs)-mediated co-production of xylo-oligomers and fermentable sugars and the related kinetic mechanism are limited.

RESULTS

In this work, glycolic acid-based DESs were used to obtain xylo-oligomers from corncob. The highest xylo-oligomers yield of 65.9% was achieved at 120 °C for 20 min, of which the functional xylo-oligosaccharides (XOSs, DP 2-5) accounted for up to 31.8%. Meanwhile, the enzymatic digestion of cellulose and xylan in residues reached 81.0% and 95.5%, respectively. Moreover, the addition of metal inorganic salts significantly accelerated the hydrolysis of xylan and even the degradation of xylo-oligomers in DES, thus resulting in higher selectivity of xylan removal. AlCl3 showed the strongest synergistic effect with DES on accelerating the processes, while FeCl2 is best one for xylo-oligomers accumulation, affording the highest xylo-oligomers yield of 66.1% for only 10 min. Furthermore, the kinetic study indicates that the 'potential hydrolysis degree' model could well describe the xylan hydrolysis processes and glycolic acid/lactic acid (3:1) is a promising solvent for xylo-oligomers production, in particular, it worked well with FeCl2 for the excellent accumulation of xylo-oligomers.

CONCLUSIONS

Glycolic acid-based deep eutectic solvents can be successfully applied in corncob fractionation with excellent xylo-oligomers and fermentable sugars yields on mild conditions, and the large amount of xylo-oligosaccharides accumulation could be achieved by specific process controlling. The strategies established here can be useful for developing high-valued products from biomass.

Enhancing ethylene glycol and ferric chloride pretreatment of rice straw by low-pressure carbon dioxide to improve enzymatic saccharification

Ethylene glycol and ferric chloride pretreatment assisted by low-pressure carbon dioxide (1 MPa CO₂) realized the targeted deconstruction of lignocelluloses at 170 °C for 5 min, achieving 98 % cellulose recovery with removal of 92 % lignin and 90 % hemicellulose. After the pretreatment, the formation of stable platform mono-phenol components would be with the destruction of the lignin-carbohydrate complexes structure, and the surface of rice straw became rough, with a less negative charge and higher specific surface area, while the enzyme adsorption rate increased by 8.1 times. Furthermore, the glucose yield of pretreated straw was remarkably increased by 5.6 times that of the untreated straw, reaching 91 % after hydrolyzed for 48 h. With Tween 80 added in concentrated solid (12 %) hydrolysis at low cellulase loading (3 FPU/g dry substrate), half of the hydrolysis time was shortened than that without Tween 80, with 45 % higher glucose yield.

Advances in organosolv modified components occurring during the organosolv pretreatment of lignocellulosic biomass

The valorization of organosolv pretreatment (OP) is a required approach to the industrialization of the current enzyme-mediated lignocellulosic biorefinery. Recent literature has demonstrated that the solvolysis happening in the OP can modify the soluble components into value-added active compounds, namely organosolv modified lignin (OML) and organosolv modified sugars (OMSs), in addition to protecting them against excessive degradation. Among them, the OML is coincidental with the "lignin-first" strategy that should render a highly reactive lignin enriched with β-O-4 linkages and less condensed structure by organosolv grafting, which is desirable for the transformation into phenolic compounds. The OMSs are valuable glycosidic compounds mainly synthesized by trans-glycosylation, which can find potential applications in cosmetics, foods, and healthcare. Therefore, a state-of-the-art OP holds a big promise of lowering the process cost by the valorization of these active compounds. Recent advances in organosolv modified components are reviewed, and perspectives are made for addressing future challenges.

Consecutive Organosolv and Alkaline Pretreatment: An Efficient Approach toward the Production of Cellulose from Rice Straw

The efficient removal of silica from rice straw and separation of its major components is essential for further valorization to produce value-added products. With regard to this, the isolation of cellulose (CEL), hemicellulose (HEM), and lignin (LIG) is imperative but quite challenging. Among several pretreatments of lignocellulosic biomass, the organosolv approach is deemed as one of the promising methods. Here, we present two different two-step approaches for the removal of silica and disintegration of significant components from rice straw, especially CEL; (i) base pretreatment, followed by organosolv treatment in the presence of organic acid, and (ii) organosolv pretreatment in the presence of organic acid, followed by base treatment. After each treatment, the recovered solid components are confirmed by various characterization techniques such as Fourier-transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, and thermogravimetric analysis. Method 2 demonstrates 82% total removal of HEM and LIG along with 90.4% of silica removal from rice straw to obtain CEL. Furthermore, the obtained crude CEL is found to be with a purity of 78%. Excellent removal of silica (90.4%) reflects that in a test study, the crude CEL obtained from method 2 gives a higher yield of butyl glucosides (59.6%) than rice straw, which affords 45.0% of butyl glucosides.

Revalorization of sunflower stalk pith as feedstock for the coproduction of pectin and glucose using a two-step dilute acid pretreatment process

BACKGROUND

Sunflower stalk pith, residue from the processing of sunflower, is rich in pectin and cellulose, thereby acting as an economic raw material for the acquisition of these compounds. In order to increase the commercial value of sunflower processing industry, a two-step dilute sulfuric acid treatment process was conducted on spent sunflower stalk pith to obtain the value-added products, pectin and glucose.

RESULTS

In this study, pectin was firstly extracted under mild acid condition to avoid pectin degradation, which was conducted at 90 °C with a pH of 2.0 for 2 h, and ~0.14 g/g of pectin could be recovered. Then the remaining solids after pectin extraction were subjected to the reinforced treatment process with 0.75% H₂SO₄ at 150 °C for 30 min to further improve enzymatic hydrolysis efficiency. Moreover, by combining a fed-batch enzymatic hydrolysis strategy, a solid loading content of 16% was successfully achieved and the glucose titer reached 103.1 g/L with a yield of 83.6%.

CONCLUSION

Finally, ~140 g pectin and 260 g glucose were produced from 1 kg of raw sunflower stalk pith using the integrated biorefinery process. This work puts forward a two-step dilute acid pretreatment combined with enzymatic hydrolysis method to produce pectin and glucose from sunflower spent waste.

Comparison of acid and alkali catalyzed ethylene glycol organosolv pretreatment for sugar production from bagasse

In this study, five acid or alkali catalyzed ethylene glycol (EG) organosolv pretreatments were proposed and compared for sugar production from bagasse. The results showed that compared with single EG/H₂O pretreatment, the EG/H₂O-HCl pretreatment was more efficient for both hemicellulose (~99.3%) and lignin (~67.1%) remove due to the synergistic effect of HCl and EG. The EG/H₂O-NaOH pretreatment was also beneficial for lignin remove (~90.9%), but it was weak for hemicellulose degradation (~28.8%). Both EG/H₂O-HCl and EG/H₂O-NaOH pretreatments have good capacity to reserve the cellulose in pretreated solids. Following enzymatic saccharification, the largest glucose recovery yield from EG/H₂O-HCl pretreatment was 94.3%, a slightly higher than this from EG/H₂O-NaOH pretreatment (92.5%). However, its xylose recovery yield was only 77.3%, significantly lower than that of EG/H₂O-NaOH pretreatment (93.5%). Besides, a certain amount of lignin also can be recovered from above acid or alkali catalyzed organosolv pretreatments through diluting or acidizing the pretreated liquids.

A cellulose degrading bacterial strain used to modify rice straw can enhance Cu(II) removal from aqueous solution

The development of lignocellulose-based adsorbents for the removal of heavy metals from wastewater has attracted much recent attention. In this work, a high-yield cellulose bacterial strain Comamonas testosteroni FJ17 was evaluated for its capacity to modify rice straw towards increased Cu(II) removal. For optimum modification time (45.5 h), inoculum concentration (1.25%), and rice straw dose (12.6 g L^-1) the optimized adsorption capacity was 28.4 mg g^-1. After strain FJ17 modification the equilibrium adsorption percentage of rice straw for Cu(II) increased from 6.6 to 27.4% at an initial concentration of 100 mg L^-1. This increase was attributed to an increase in rice straw surface modification, leading to improved adsorption ability. SEM-EDS indicated that, following strain FJ17 treatment, the surface of the rice straw became more disintegrated and the specific surface area consequentially increased from 1.9 to 3.7 m² g^-1. FTIR analysis also showed new functional groups (carbonyl) appearing, and CC and CH₃CR functionality being enhanced after biomodification. Functional groups associated with the benzene ring, silicified polymer and carbohydrates were all involved in the adsorption process. Adsorption of Cu was well described by the Freundlich isotherm model (R² > 0.98) where adsorption was endothermic with potential for both chemical and physical interactions to coexist. Reusability experiments showed that the removal efficiency of Cu(II) decreased from 96.9 to 73.2% after five cycles. Overall C.testosteroni-treated rice straw had significant potential as a heavy metal biosorbent.

Chemical modification of lignin derived from spent coffee grounds for methylene blue adsorption

In this work, spent coffee grounds (SCG) were treated using sulfuric acid hydrolysis in order to isolate the sulfuric acid lignin (SAL). The reactivity of SAL was improved through phenolation and acetylation. Spectroscopic analysis showed that the isolated lignin is composed of GHS type and it was characterized by a high amount of (C-C) and β-O-4 bonds. The thermal analysis showed that the phenolated sulfuric acid lignin (Ph-SAL) present higher thermal stability compared to SAL and acetylated sulfuric acid lignin. In addition, the phenolic hydroxyl group content increases from 2.99 to 9.49 mmol/g after phenolation. Moreover, a methylene blue (MB) adsorption test was established in order to find out the sorption capacity of different samples. The study showed that the adsorbed amount of dye increase after the chemical modification of SAL, especially after phenolation. The removal efficiency was enhanced after modification to reach 99.62% for Ph-SAL. The evaluation of the adsorption experimental data with the theoretical models of Langmuir and Freundlich showed that the best fitting was expressed by the Langmuir model for all samples. Finally, this study showed that lignin isolated from SCG can be simply and easily chemical modified and exhibits excellent adsorption ability towards cationic dyes (MB) in aqueous solutions. As a renewable, low-cost, and natural biomass material, lignin from SCG shows a promising practical and economical application of biomass in the field of wastewater purification.

Alkaline organosolv pretreatment of different sorghum stem parts for enhancing the total reducing sugar yields and p-coumaric acid release

BACKGROUND

The sorghum stem can be divided into the pith and rind parts with obvious differences in cell type and chemical composition, thus arising the different recalcitrance to enzyme hydrolysis and demand for different pretreatment conditions. The introduction of organic solvents in the pretreatment can reduce over-degradation of cellulose and hemicellulose, but significance of organic solvent addition in pretreatment of different parts of sorghum stem is still unclear. Valorization of each component is critical for economy of sorghum biorefinery. Therefore, in this study, NaOH-ethanol pretreatment condition for different parts of the sorghum stem was optimized to maximize p-coumaric acid release and total reducing sugar recovery.

RESULT

Ethanol addition improved p-coumaric acid release and delignification efficiency, but significantly reduced hemicellulose deconstruction in NaOH-ethanol pretreatment. Optimization using the response surface methodology revealed that the pith, rind and whole stem require different NaOH-ethanol pretreatment conditions for maximal p-coumaric acid release and xylan preservation. By respective optimal NaOH-ethanol pretreatment, the p-coumaric acid release yields reached 94.07%, 97.24% and 95.05% from pith, rind and whole stem, which increased by 8.16%, 8.38% and 8.39% compared to those of NaOH-pretreated samples. The xylan recoveries of pith, rind and whole stem reached 76.80%, 88.46% and 85.01%, respectively, which increased by 47.75%, 15.11% and 35.97% compared to NaOH pretreatment. Adding xylanase significantly enhanced the enzymatic saccharification of pretreated residues. The total reducing sugar yields after respective optimal NaOH-ethanol pretreatment and enzymatic hydrolysis reached 84.06%, 82.29% and 84.09% for pith, rind and whole stem, respectively, which increased by 29.56%, 23.67% and 25.56% compared to those of NaOH-pretreated samples. Considering the separation cost of the different stem parts, whole sorghum stem can be directly used as feedstock in industrial biorefinery.

CONCLUSION

These results indicated that NaOH-ethanol is effective for the efficient fractionation and pretreatment of sorghum biomass. This work will help to understand the differences of different parts of sorghum stem under NaOH-ethanol pretreatment, thereby improving the full-component utilization of sorghum stem.

Recent advances in organosolv fractionation: Towards biomass fractionation technology of the future

Organosolv treatment is among the most promising strategies for valorising lignocellulosic biomass and could facilitate the transition towards enhanced utilization of renewable feedstocks. However, issues such as inefficient solvent recycle and fractionation has to be overcome. The present review aims to address these issues and discuss the role of the components present during organosolv treatment and their influence on the overall process. Thus, the review focuses not only on how the choice of solvent and catalyst affects lignocellulosic fractionation, but also on how the choice of treatment liquor influences the possibility for solvent recycling and product isolation. Several organic solvents have been investigated in combination with water and acid/base catalysts; however, the lack of a holistic approach often compromises the performance of the different operational units. Thus, an economically viable organosolv process should optimize biomass fractionation, product isolation, and solvent recycling.

Enhanced enzymatic digestibility of poplar wood by quick hydrothermal treatment

To elevate the glucose yield from the enzymatic hydrolysis of poplar wood for bio-ethanol production, quick hydrothermal treatment (QHT) was conducted at 200 °C for a short period of time from 5 min to 25 min. It was found that the QHT could remove >85% of the hemicelluloses and ~30% of the lignin in the poplar wood, and achieve 82% cellulose conversion at a low cellulase dosage of 10 FPU/g substrate. The enhancement digestibility of poplar wood was ascribed to the higher accessibility of cellulose, as the specific surface area of the substrate increased from 3.0 m²/g to 7.1 m²/g from the of untreated wood to the QHT-treated wood. The results demonstrate the improvements in digestibility and hydrolysis rates after QHT.

High-concentrated substrate enzymatic hydrolysis of pretreated rice straw with glycerol and aluminum chloride at low cellulase loadings

Rice straw was pretreated with glycerol and AlCl₃ for enzymatic hydrolysis at low cellulase loadings. Based on a central composite design, 83% delignification, 94% hemicellulose removal, and 92% cellulose recovery (or 76% cellulose in solid residue) were achieved under the optimized pretreatment conditions (0.08 mol/L AlCl₃ as catalyst at 146.8 °C for 20 min with 90% glycerol). During glycerol-AlCl₃ pretreatment, the lignin-carbohydrate complex was depolymerized, resulting in the complex and recalcitrant construction of straw effectively being destroyed. The enzyme adsorption ability of pretreated straw was 16.5 times that for the original sample. After pretreatment, glucose yield was increased by 2.4 times to 74% for 48 h. Moreover, concentrated solid (15%) with low cellulase loading (3.3 FPU/g dry substrate) achieved 58.6% glucose yield, and further increased by 12% to 65.7% by adding Tween 80. Glycerol-AlCl₃ pretreatment was a promising approach to realize high-concentrated solid hydrolysis for sugars at low cellulase loadings.

Lignin - An underutilized, renewable and valuable material for food industry

Lignin is the second most abundant biorenewable polymers only next to cellulose and is ubiquitous in various plant foods. In food industry, lignin often presented as a major component of by-products from plant foods. In the last decade, the food and nutritional interests of lignin attracted more and more attentions and great progresses have been accomplished. In the present review, the structure, physicochemical properties, dietary occurrence and preparation methods of lignin from food resources were summarized. Then, the versatile activities of food lignin were introduced under the subtitles of antioxidant, antimicrobial, antiviral, antidiabetic and other activities. Finally, the potential applications of food lignin were proposed as a food bioactive ingredient, an improver of food package films and a novel material in fabricating drug delivery vehicles and contaminant passivators. Hopefully, this review could bring new insights in exploiting lignin from nutrition- and food-directed views.