Optimization of light intensity and photoperiod for Isochrysis galbana culture to improve the biomass and lipid production using 14-L photobioreactors with mixed light emitting diodes (LEDs) wavelength under two-phase culture system

Biocatalytic conversion of microalgal biomass to biodiesel: optimization of growth conditions and synthesis of CaO bionanocatalyst from Monoraphidium sp. NCIM 5585

Microalgal feedstock is a potential source for biodiesel production that addresses the challenges of fuel security and sustainable agriculture. This study aims to maximize biomass yield and lipid accumulation for freshwater microalga Monoraphidium sp. NCIM 5585 and utilize it for biodiesel production, contributing to the development of biocatalysis-based biofuels. Independent optimization studies were conducted to investigate critical growth parameters, viz., light intensity, photoperiod, and NaNO3 concentration. The study showed highest biomass productivity of 51.75 ± 1.9 mg/L.d and lipid content of 47.3 ± 0.02% (w/w) at 40 µmol/m2/s light intensity, 16 h L:08 h D photoperiod, and 0.25 g/L NaNO3. Further, a novel CaO bionanocatalyst was synthesized using residual microalgal biomass and characterized using SEM, EDX, FT-IR, and XRD. The characterization results from SEM and EDX confirmed the structural and elemental composition of bionanocatalyst with Ca and O as main elements. XRD revealed the crystalline nature of CaO with particle size of 17.83 nm. 86.5 ± 0.65% (w/w) FAME was obtained using the synthesized catalyst and was characterized using 1H NMR, 13C NMR and GC-MS. This study demonstrates the potential of Monoraphidium sp., optimized growth conditions and the significance of reusability of residual microalgal biomass as catalyst for sustainable biodiesel production, offering a promising solution for fuel security and biotechnology applications.

Microalgae bioprospecting for the food industry: insights into the autotrophic biomass production and macromolecular accumulation of four microalgal species

In this study, four microalgal strains were evaluated for their biomass production capacity and macromolecule biosynthesis. These include three strains from the phylum Chlorophyta: Monoraphidium sp. LB2PC 0120, Stichococcus sp. LB2PC 0117, and Tetraselmis sp. LB2PC 0320, and one strain from the phylum Haptophyta: Isochrysis sp. LB2PC 0220. The experiments were conducted under typical laboratory-scale setups. Additionally, phylogenetic analysis based on the 18-28 S rRNA internal transcribed spacer (ITS) was performed to validate the taxonomic identity of the strains. Each strain was exposed to four different cultivation conditions based on two levels of illumination intensity [25-(LI) and 50-(HI) µmol m- 2 s- 1] and nitrogen loading [100-(LΝ) and 300-(HΝ) mg NaNO3 L- 1] in a full factorial design. All the microalgae achieved maximum biomass production under HI-HN conditions, which amounted to 1495, 919, 844, and 708 mg/L for Monoraphidium sp. LB2PC 0120, Stichococcus sp. LB2PC 0117, Tetraselmis sp. LB2PC 0320 and Isochrysis sp. LB2PC 0220, respectively, after 16 days of cultivation. Among them, Stichococcus sp. LB2PC 0117 had the highest protein content (49.9% wt.) under LI-HN conditions and Monoraphidium sp. LB2PC 0120 had the highest lipid content (44.3% wt.) under HI-LN conditions. Both Monoraphidium sp. LB2PC 0120 and Tetraselmis sp. LB2PC 0320 accumulated the highest carbohydrate content (~ 37% wt.) under LI-LN and HI-LN conditions, respectively. Based on biomass and macromolecule production, Monoraphidium sp. LB2PC 0120 was identified as the most promising candidate for upscaling studies, expecting its highly manipulatable compositional profile to support multiple applications in the food industry, rendering this microalga a valuable resource.

Enhancing high-density microalgae cultivation via exogenous supplementation of biostimulant derived from onion peel waste for sustainable biodiesel production

Microalgae demonstrate significant potential as a source of liquid-based biofuels. However, increasing biomass productivity in existing cultivation systems is a critical prerequisite for their successful integration into large-scale operations. Thus, the current work aimed to accelerate the growth of C. vulgaris via exogenous supplementation of biostimulant derived from onion peel waste. Under the optimal growth conditions, which entailed a biostimulant dosage of 37.5% v/v, a pH of 3, an air flow rate of 0.4 L/min, and a 2% v/v inoculum harvested during the mid-log phase, yielded a maximum biomass concentration of 1.865 g/L. Under the arbitrarily optimized parameters, a comparable growth pattern was evident in the upscaled cultivation of C. vulgaris, underscoring the potential commercial viability of the biostimulant. The biostimulant, characterized through gas chromatography-mass spectrometry (GC-MS) analysis, revealed a composition rich in polyphenolic and organo-sulphur compounds, notably including allyl trisulfide (28.13%), methyl allyl trisulfide (23.04%), and allyl disulfide (20.78%), showcasing potent antioxidant properties. Additionally, microalgae treated with the biostimulant consistently retained their lipid content at 18.44% without any significant reduction. Furthermore, a significant rise in saturated fatty acid (SFA) content was observed, with C16:0 and C18:1 dominating both bench-scale (44.08% and 14.01%) and upscaled (51.12% and 13.07%) microalgae cultures, in contrast to the control group where C18:2 was prevalent. Consequently, SFA contents reached 54.35% and 65.43% in bench-scale and upscaled samples respectively, compared to 33.73% in the control culture. These compositional characteristics align well with the requirements for producing high-quality crude biodiesel.

Realization process of microalgal biorefinery: The optional approach toward carbon net-zero emission

Increasing carbon dioxide (CO2) emission has already become a dire threat to the human race and Earth's ecology. Microalgae are recommended to be engineered as CO2 fixers in biorefinery, which play crucial roles in responding climate change and accelerating the transition to a sustainable future. This review sorted through each segment of microalgal biorefinery to explore the potential for its practical implementation and commercialization, offering valuable insights into research trends and identifies challenges that needed to be addressed in the development process. Firstly, the known mechanisms of microalgal photosynthetic CO2 fixation and the approaches for strain improvement were summarized. The significance of process regulation for strengthening fixation efficiency and augmenting competitiveness was emphasized, with a specific focus on CO2 and light optimization strategies. Thereafter, the massive potential of microalgal refineries for various bioresource production was discussed in detail, and the integration with contaminant reclamation was mentioned for economic and ecological benefits. Subsequently, economic and environmental impacts of microalgal biorefinery were evaluated via life cycle assessment (LCA) and techno-economic analysis (TEA) to lit up commercial feasibility. Finally, the current obstacles and future perspectives were discussed objectively to offer an impartial reference for future researchers and investors.

Effects of Temperature, Light and Salt on the Production of Fucoxanthin from Conticribra weissflogii

Fucoxanthin is a natural active substance derived from diatoms that is beneficial to the growth and immunity of humans and aquatic animals. Temperature, light and salinity are important environmental factors affecting the accumulation of diatom actives; however, their effects on the production of fucoxanthin in C. weissflogii are unclear. In this study, single-factor experiments are designed and followed by an orthogonal experiment to determine the optimal combination of fucoxanthin production conditions in C. weissflogii. The results showed that the optimum conditions for fucoxanthin production were a temperature of 30 °C, a light intensity of 30 umol m-2 s-1 and a salinity of 25. Under these conditions, the cell density, biomass, carotenoid content and fucoxanthin content of C. weissflogii reached 1.97 × 106 cell mL-1, 0.76 g L-1, 2.209 mg L-1 and 1.372 mg g-1, respectively, which were increased to 1.53, 1.71, 2.50 and 1.48 times higher than their initial content. The work sought to give useful information that will lead to an improved understanding of the effective method of cultivation of C. weissflogii for natural fucoxanthin production.

Microalgae Oil-Based Metal Working Fluids for Sustainable Minimum Quantity Lubrication (MQL) Operations—A Perspective

This article presents a perspective on the potential use of microalgae oils in the production of metal working fluids (MWFs) used for minimum quantity lubrication (MQL) operations. The generalities of MQL operations and requirements of MWFs, and current advances in the development of the most promising microalgae oils with high contents of saturated, monounsaturated, and polyunsaturated fatty acids were reviewed and discussed. The analysis of data, discussions, and conclusions of numerous studies published recently and combined with the experience of the multidisciplinary team of authors strongly suggest that microalgae oils do indeed have great potential as sustainable and eco-friendly base oils for producing semi-synthetic MWFs, soluble oils and straight cutting fluids for MQL operations. Additionally, gaps and challenges focused on the use of agro-industry wastewater in microalgae production, green harvesting and oil extraction methods, and replacement of toxic additives in MWFs by green nanoparticles and biopolymers were identified and highlighted for achieving massive microalgae oil-based MWFs production and truly green machining processes.

Bright as day and dark as night: light-dependant energy for lipid biosynthesis and production in microalgae

Microalgae are photosynthetic organisms functioning as the green bio-factories for various pharmaceutical and biofuel products. To date, numerous attempts have been carried out to manipulate culture conditions to maximize the production of the desired metabolites. Because light is the energy source of microalgae for their growth and metabolites biosynthesis, it has been one of the most investigated variables emphasized on the deep understanding of how microalgae respond towards light changes as an external stimulus. This review discusses the effects of different light sources, light intensities, light wavelengths and length of photoperiod on various microalgae species, especially in terms of biomass and lipid productivity. Additionally, the relationship between photoregulation processes and lipid productivity of microalgae are also deliberated. The current available approaches of microalgae mass cultivation, including different types of open and closed systems are recapitulated with the intention to highlight the significant insights for the design of future photoreactors.

Microalgae Biomass as a New Potential Source of Sustainable Green Lubricants

Lubricants are materials able to reduce friction and/or wear of any type of moving surfaces facilitating smooth operations, maintaining reliable machine functions, and reducing risks of failures while contributing to energy savings. At present, most worldwide used lubricants are derived from crude oil. However, production, usage and disposal of these lubricants have significant impact on environment and health. Hence, there is a growing pressure to reduce demand of this sort of lubricants, which has fostered development and use of green lubricants, as vegetable oil-based lubricants (biolubricants). Despite the ecological benefits of producing/using biolubricants, availability of the required raw materials and agricultural land to create a reliable chain supply is still far from being established. Recently, biomass from some microalgae species has attracted attention due to their capacity to produce high-value lipids/oils for potential lubricants production. Thus, this multidisciplinary work reviews the main chemical-physical characteristics of lubricants and the main attempts and progress on microalgae biomass production for developing oils with pertinent lubricating properties. In addition, potential microalgae strains and chemical modifications to their oils to produce lubricants for different industrial applications are identified. Finally, a guide for microalgae oil selection based on its chemical composition for specific lubricant applications is provided.

The effect on single and combined stresses for biomass and lipid production from Nannochloris atomus using two phase culture system

The optimal conditions for high biomass and lipid production from Nannochloris atomus were evaluated. The parameters used in this study were light emitting diode (LED) wavelength mixing ratio, the photoperiod, salinity tolerance, and single and combined stresses. Biomass production was monitored in the first phase using red LED (625 nm), followed by lipid production by green LED (520 nm) in the second phase. The optimal conditions were obtained using a single red LED with light:dark durations of 20:4 h and two days of exposure in combined stresses of 1.06 M NaCl and green LED. Under these conditions, 68.6 % (w/w) lipid content were obtained. Compared to the non-stress control, the lipid content was increased by 31.9 %. Linolenic acid (C18:3) the omega-3 fatty acid was produced up to 52.4 % in 1.06 M NaCl as a single stress.

Process optimization of fucoxanthin production with Tisochrysis lutea

To optimize fucoxanthin production in Tisochrysis lutea, the effect of different process parameters on fucoxanthin productivity (Pfx) were evaluated using batch and continuous experiments. In batch, the highest Pfx was found at 30 °C and 300 μmol m^-2 s^-1, allowing to design continuous experiments to optimize the dilution rate. The highest ever reported Pfx (9.43-9.81 mg L^-1 d^-1) was achieved at dilution rates of 0.53 and 0.80 d^-1. Irradiance was varied (50-500 μmol m^-2 s^-1) to result in a range of absorbed light between 2.23 and 25.80 mol m^-2 d^-1 at a fixed dilution rate (0.53 d^-1). These experiments validated the hypothesis that light absorbed can be used to predict fucoxanthin content, resulting in 2.23 mol m^-2 d^-1 triggering the highest fucoxanthin content (16.39 mg/g). The highest Pfx was found with 18.38 mol m^-2 d^-1. These results can be used to achieve high Pfx or fucoxanthin content during cultivation of Tisochrysis lutea.

White and red LEDs as two-phase batch for cyanobacterial pigments production

Carotenoids and phycobiliproteins have a high economic value, due to their wide range of biological and industrial applications. The implementation of strategies to increase their production, such as the application of two-phase light cultivation systems, can stimulate pigments production, increasing economic turnover. In this sense, Cyanobium sp. was grown in seven different two-phase white/red cultivation arrangements, varying the time of each light from 0 to 21 days. Biomass, photosynthetic activity, pigments profile and antioxidant capacity were measured along time. Red light increased photosynthetic activity and pigments content (ca. 1.8-fold), and the use of a two-phase cultivation system generally raised bioactivity and production of phytochemicals. Among the studied, the optimal cultivation condition was found with 10 days of white followed by 4 days of red light. The optimized growth led to a productivity of 137.4 ± 0.8 mg L^-1 d^-1 of biomass, 17.0 ± 0.2 mg L^-1 d^-1 of total phycobiliproteins and 4.5 ± 0.2 mg L^-1 d^-1 of carotenoids.

Role of light emitting diode (LED) wavelengths on increase of protein productivity and free amino acid profile of Spirulina sp. cultures

LEDs have specific wavelengths that can positively influence the production of microalga biomass and biomolecules of interest. Filling the gaps in the literature, this study evaluated the effect of different LED wavelengths and photoperiods on protein productivities and free amino acid (FAA) profile of Spirulina sp. LEB 18 cultures. The best protein productivity results were obtained in red and green LED cultures using integral and partial photoperiods, respectively. In these experiments, protein productivities increased 2 and 1.6 times, respectively, compared to the control culture using fluorescent light. Green LEDs in partial photoperiod provided also the highest concentrations of essential and non-essential FAA, about 1.8 and 2.3 times higher, respectively, than control cultures. LEDs showed to be a promising sustainable light source for increasing protein productivity and FAA concentration in Spirulina sp. LEB 18 cultures.

Applications of Light-Emitting Diodes (LEDs) in Food Processing and Water Treatment

Light-emitting diode (LED) technology is an emerging nonthermal food processing technique that utilizes light energy with wavelengths ranging from 200 to 780 nm. Inactivation of bacteria, viruses, and fungi in water by LED treatment has been studied extensively. LED technology has also shown antimicrobial efficacy in food systems. This review provides an overview of recent studies of LED decontamination of water and food. LEDs produce an antibacterial effect by photodynamic inactivation due to photosensitization of light absorbing compounds in the presence of oxygen and DNA damage; however, such inactivation is dependent on the wavelength of light energy used. Commercial applications of LED treatment include air ventilation systems in office spaces, curing, medical applications, water treatment, and algaculture. As low penetration depth and high-intensity usage can challenge optimal LED treatment, optimization studies are required to select the right light wavelength for the application and to standardize measurements of light energy dosage.

Pressurized liquid extraction with ethanol as a green and efficient technology to lipid extraction of Isochrysis biomass

This work was the first time to establish a green pressurized liquid extraction (PLE) process to extract microalgal lipids from Isochrysis biomass. PLE with ethanol exhibited superior lipid extraction performance in comparison to Soxhlet and Folch methods and PLE with n-hexane. To reduce the cost in ethanol utilization, ethanol concentration was optimized and found that PLE with 90% ethanol concentration obtained the highest lipid extraction efficiency (41.5 wt%) and total fatty acids (TFAs) recovery value (92.17 wt%) using Isochrysis sp. biomass. Results about lipid class detected by TLC-FID technique showed that ethanol concentration distinctly affected the content of lipidic class during lipid extraction by PLE. Similarly, the process with 90% ethanol concentration achieved over 90 wt% of TFAs recovery values with three different Isochrysis species. Overall, PLE process mediated with ethanol was a promising approach to extract Isochrysis-derived lipids from sustainable microalgal biomass for food application.