Alginate to simulate biofouling in submerged fluidized ceramic membrane reactor: Effect of solution pH and ionic strength

Insights into the membrane biofouling behavior of planktonic anammox bacteria: Effect of solution pH and ionic strength

Understanding the effect of solution pH and ionic strength on membrane biofouling of anammox bacteria is essential for the widespread application of anammox MBRs. To provide an original elucidation, this study combined interfacial thermodynamics analysis and filtration experiments with an established planktonic anammox MBR to explore the biofouling behavior of anammox bacteria under varying solution pH and ionic strengths. Preliminary results showed that variation in solution pH and ionic strength has critical impacts on the thermodynamic properties of planktonic anammox bacteria and membrane surfaces. The further interfacial thermodynamics analysis and filtration experiments indicated that an increased pH and a decreased ionic strength could reduce membrane fouling by planktonic anammox bacteria. More specifically, a higher pH or lower ionic strength resulted in a stronger repulsive energy barrier due to the larger interaction distance covered by the dominant electrostatic double layer (EL) component compared to the Lewis acid-base (AB) and Lifshitz-van der Waals (LW) components, which corresponded to a reduction in the normalized flux (J/J₀) decline and the accumulation of cake resistance (R_c) during the filtration process. Furthermore, the aforementioned effect mechanism was verified by a correlation analysis of the thermodynamic properties and filtration behavior. These findings have generalized significance for understanding the biofouling or aggregation behavior of anammox bacteria.

Applications of submerged and staged membrane systems for pollutant removal from effluents and mechanism studies - a review

Membrane based filtration is one of the promising technologies for rehabilitation of wastewater streams for reuse and recycle. Many advancements have emerged with the use of novel materials and innovative integrated technologies. The present investigation focuses on the treatment methods based on submerged and stages systems of membranes for water purification. Ceramic, polymeric and mixed matrix type of membranes fabricated for specific type of effluents, their modification methods for accelerating the rejection efficiency, permeability, durability, stability and antifouling properties are detailed in this review. Graphene oxide is the most considered membrane material for adsorption purposes as it exhibits larger surface area, abundant functional groups contain oxygen and has good supply of ligands which is responsible in metal adsorption as it enhances electrostatic interaction by bonding metal ions with graphene oxide nanosheets. Energy derivation in terms of biogas production was also reported in some integrated methods. In many cases, embedded nanomaterial matrices yielded maximum efficiencies in both the submerged and staged operations. However, submerged type of membranes are reported more than the staged type due to simpler configuration with relatively lesser equipment, operational and maintenance issues. In treatment of a low strength wastewater, aluminum oxide based membrane in fluidized bed assembly was reported to yield promising results with reduced power requirement.

Mitigating membrane biofouling in biofuel cell system – A review

A biofuel cell (BFC) system can transform chemical energy to electrical energy through electrochemical reactions and biochemical pathways. However, BFC faced several obstacles delaying it from commercialization, such as biofouling. Theoretically, the biofouling phenomenon occurs when microorganisms, algae, fungi, plants, or small animals accumulate on wet surfaces. In most BFC, biofouling occurs by the accumulation of microorganisms forming a biofilm. Amassed biofilm on the anode is desired for power production, however, not on the membrane separator. This phenomenon causes severities toward BFCs when it increases the electrode’s ohmic and charge transfer resistance and impedes the proton transfer, leading to a rapid decline in the system’s power performance. Apart from BFC, other activities impacted by biofouling range from the uranium industry to drug sensors in the medical field. These fields are continuously finding ways to mitigate the biofouling impact in their industries while putting forward the importance of the environment. Thus, this study aims to identify the severity of biofouling occurring on the separator materials for implementation toward the performance of the BFC system. While highlighting successful measures taken by other industries, the effectiveness of methods performed to reduce or mitigate the biofouling effect in BFC was also discussed in this study.

The Use of NaOH Solutions for Fouling Control in a Membrane Bioreactor: A Feasibility Study

Nowadays, the microbial production of 1,3-propanediol (1,3-PD) is recognized as preferable to the chemical synthesis. However, finding a technological approach allowing the production of 1,3-PD in the membrane bioreactor (MBR) is a great challenge. In the present study, a ceramic ultrafiltration (UF) membrane (8 kDa) for treatment of 1,3-PD broths was used. It has been demonstrated that the membrane used provides the stable permeate flux that is necessary to ensure the stability of the fermentation process in MBR technology. It was noticed that the broth pH has a significant impact on both the final 1,3-PD concentration and permeate flux. Moreover, the feasibility of using NaOH for fouling control in the MBR was evaluated. It has been shown that 1% NaOH solution is effective in restoring the initial membrane performance. To the best of our knowledge, this study is the first to shed light onto the possibility of reducing the amount of the alkaline solutions generated during the MBR operation. Indeed, it has been found that 1% NaOH solution can be successfully used several times for both membrane cleaning and to stabilize the broth pH. Finally, based on the results obtained, the technological conceptions of the MBR technology were designed.