Nutrient balance for anaerobic co-digestion of tannery wastes: Energy efficiency, waste treatment and cost-saving

Potential of biofuel production from leather solid wastes: Indian scenario

India is one among the major leather-producing countries in the world which shares close to one-fourth of the world's leather solid wastes and most of these wastes are not effectively utilized. These wastes are rich in protein and lipids that could be a potential feedstock for biofuel production, i.e., biogas, biodiesel, etc. Among the 150,000 tons of daily leather solid wastes in India, approximately 87,150 tons are shared by pre-tanning operations (i.e., raw trimmings, fleshing, and hair wastes) while the rest of the 62,850 tons are shared by tanning, post-tanning, and finishing operations (i.e., wet blue trimmings, chrome splits, shavings, buffing dust, crust trimming wastes). This review article shows that there is considerable bioenergy potential for the use of leather solid wastes as a green fuel. The biogas potential of leather solid wastes is estimated to be 40,532.9 m3/day whereas the biodiesel potential is estimated as 15,452.6 L/day. The bio-oil and bio-char potential of leather solid wastes is estimated to be 80,513.0 L/day and 45.8 tons/day, respectively. Several factors influence the biofuel process efficacy, which needs to be taken into consideration while setting up a biofuel recovery plant. The overall biofuel potential of leather solid wastes shows that this feedstock is an untapped resource for energy recovery to add commercial benefits to India's energy supply. Furthermore, in addition to the economic benefits for investors, the use of leather solid wastes for biofuel production will yield a positive environmental impact.

A systematic review on tannery sludge to energy route: Current practices, impacts, strategies, and future directions

The growing amount of tannery sludge (TS) generated from leather processing often undergoes uncontrolled landfilling, or open dumping, releasing a significant volume of harmful pollutants, including carcinogenic chromium (Cr) into the air, water, and soil. Therefore, the sustainable TS management through advanced valorization technologies becomes vital to align with the Sustainable Development Goals (SDGs) and mitigate the adverse environmental, health, and social impacts. Moreover, TS, as biomass, can be considered a renewable energy source for bioenergy generation, which could be a viable solution for meeting contemporary environmental standards and expediting transition towards a circular economy. However, TS valorization is sensitive and critical due to the potential risk of transforming Cr(III) to Cr(VI) during the valorization process. Therefore, there is an urgency to consider efficient and holistic TS valorization technologies in the design, implementation, and operations phases to avoid any environmental and health hazards. In pursuit of this goal, this systematic literature review (SLR) comprehensively and critically analyzes the existing TS valorization processes to develop sustainable energy recovery solutions from TS. This SLR contributes uniquely to the existing literature in different ways. Firstly, it provides a critical evaluation of the current TS valorization technologies identifying the available waste-to-energy recovery options. Secondly, the review encompasses extensive research from three reputed databases such as Scopus, Web of Science, and ScienceDirect, without temporal restrictions to offer a comprehensive understanding of current TS management practices and available valorization techniques. Moreover, the review categorized 124 published papers into distinct groups, revealing promising avenues for future research in this field. The findings indicated that most of the work concentrating on Chrome (Cr) recovery, pyrolysis, anaerobic co-digestion, and solidification while gasification and biodiesel or biofuel production from TS remained largely unexplored. Additionally, vital aspects such as process optimization, life cycle assessment of different valorization techniques, environmental, economy, energy, emergy, and exergy (5E) analysis, life cycle energy balance, and techno-economic analysis including exergoeconomic and exergoenvironmental are completely absent in the literature. Future studies need to concentrate on process optimization, exergy and energy analysis, and techno-economic assessment including exergoeconomic and exergoenvironmental analysis to understand the feasibility and environmental benefits of various TS valorization technologies and to develop industry-scale valorization plants for TS management in an economically and ecologically sustainable manner. Moreover, the review will serve as a comprehensive guide for scholars, authorities, and stakeholders to advance research in this field and formulate policies for the eco-friendly management of TS, paving the way towards clean energy solutions.

Composite Polymers from Leather Waste to Produce Smart Fertilizers

The leather industry is facing important environmental issues related to waste disposal. The waste generated during the tanning process is an important resource of protein (mainly collagen) which can be extracted and reused in different applications (e.g., medical, agricultural, leather industry). On the other side, the utilization of chemical fertilizers must be decreased because of the negative effects associated to an extensive use of conventional chemical fertilizers. This review presents current research trends, challenges and future perspectives with respect to the use of hide waste to produce composite polymers that are further transformed in smart fertilizers. Hide waste contains mostly protein (collagen that is a natural polymer), that is extracted to be used in the cross-linking with water soluble copolymers to obtain the hydrogels which are further valorised as smart fertilizers. Smart fertilizers are a new class of fertilizers which allow the controlled release of the nutrients in synchronization with the plant's demands. Characteristics of hide and leather wastes are pointed out. The fabrication methods of smart fertilizers and the mechanisms for the nutrients release are extensively discussed. This novel method is in agreement with the circular economy concepts and solves, on one side, the problem of hide waste disposal, and on the other side produces smart fertilizers that can successfully replace conventional chemical fertilizers.

Leather Solid Waste/Poly(vinyl alcohol)/Polyaniline Aerogel with Mechanical Robustness, Flame Retardancy, and Enhanced Electromagnetic Interference Shielding

Renewable biobased aerogels display a promising potential to fulfill the surging demand in various industrial sectors. However, its inherent low mechanical robustness, flammability, and lack of functionality are still huge obstacles in its practical application. Herein, a novel integrated leather solid waste (LSW)/poly(vinyl alcohol) (PVA)/polyaniline (PANI) aerogel with high mechanical robustness, flame retardancy, and electromagnetic interference (EMI) shielding performance was successfully prepared. Amino carboxyl groups in LSW could be effectively exposed by solid-state shear milling (S³ M) technology to form strong hydrogen-bond interactions with the PVA molecular chains. This led to a change in the compressive strength and the temperature of the initial dimensional change to 15.6 MPa and 112.7 °C at a thickness of 2.5 cm, respectively. Moreover, LSW contains a large number of N elements, which ensures a nitrogen-based flame-retardant mechanism and increase in the limit oxygen index value of LSW/PVA aerogel to 32.0% at a thickness of 2.5 mm. Notably, by the cyclic coating method, a conductive PANI layer could be polymerized on the surface of LSW/PVA aerogel, which led to the construction of a sandwich structure with impressive EMI shielding capability. The EMI shielding effectiveness (SE) reached more than 40 dB, and the specific shielding effectiveness (SSE) reached 73.0 dB cm³ g^-1. The inherent dipoles in collagen fibers and the conductive PANI synergistically produced an internal multiple reflection and absorption mechanism. The comprehensive performance of LSW/PVA/PANI aerogel not only demonstrates a new strategy to recycle LSW in a more value-added way but also sheds some more light on the development of biomass aerogels with high-performance, environmentally friendly, and cost-effective properties.

In vitro microcosm of co-cultured bacteria for the removal of hexavalent Cr and tannic acid: A mechanistic approach to study the impact of operational parameters

Industrial wastes, for instance, tannery wastes are rich soups of resistant and bioremediation-potent bacteria. In the present work, Chromium (Cr) and tannic acid (TA) resistance bacterial strains were isolated from tannery effluent and identified as Bacillus subtilis (MCC 3275) and Bacillus safensis (MCC 3283) based on its 16S Ribosomal RNA homology. Hexavalent Cr is highly toxic and mutagenic due to its high mobility and reactivity. Whereas, TA is known to inhibit enzyme activity, substrate deprivation, and interaction with membranes and matrix-metal ions. The developed In vitro co-cultured microcosm of B. subtilis and B. safensis was able to remove Cr(VI) up to 95% and TA up to 23%. The bacteria cultures separately were able to degrade Cr(VI) to 88% by B. subtilis and 91% by B. safensis and TA up to 27%. Plackett Burman design (PBD) followed by Response surface methodology (RSM) was applied for the optimization of physio-chemical parameters. The optimized conditions for co-culture development were recorded as K₂HPO₄ = 0.2 g/L, MgSO₄ = 0.2 g/L, NH₄Cl = 0.5 g/L, glucose - 0.2 g/L, TA - 5%, Cr = 200 ppm, incubation period of 96 h, agitation speed of 110 rpm, pH = 5.0, temperature= 30 °C and inoculum size = 3%. Scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) revealed the thorough mechanism of cellular uptake followed by degradation of Cr(VI) and TA. The efficiency of co-culture for other heavy metals was observed as follows: Zn 65%, Pb 63%, Cd 65%, and Ni 65%. Bioremediation using bacteria is an economical and environmentally better alternative to conventional remediation methods. The isolated bacteria are useful in the effluent treatment of tannery or related industries and in metal recovery in mining processes.