A review on anaerobic digestion of energy and cost effective microalgae pretreatment for biogas production

Effects of Spirulina Supplementation on C-Reactive Protein (CRP): A Systematic Review and Dose-Response Meta-Analysis

The preceding research has produced varied results concerning the impact of Spirulina supplementation on C-reactive protein (CRP) levels, considered one of the primary risk factors associated with inflammation in chronic conditions. We aimed to understand the potential relationship between Spirulina supplementation and human CRP modulation by performing a meta-analysis. A comprehensive search was conducted up to February 2024 on prominent medical bibliographic databases, including Web of Science, Scopus, and PubMed, to identify relevant studies. The overall effect size was calculated using a random-effects model that was proposed by DerSimonian and Laird. The pooled effect size was expressed as weighted mean differences (WMD) with 95% confidence intervals (CI). Furthermore, the heterogeneity between the included studies was evaluated using Cochran's Q test and the I 2 statistic. Our meta-analysis included 7 trials with 283 subjects and 10 effect sizes. Spirulina supplementation significantly reduced serum CRP levels compared to the control group (WMD: -0.55 mg/L; 95% CI: -0.90 to -0.21; p = 0.002). However, heterogeneity among the studies was high (I 2 = 86.7%, p < 0.001). Furthermore, no significant linear and non-linear relationship between supplementation features (dosage and duration) and changes in CRP levels was detected. The results of the current systematic review and meta-analysis suggest that the intake of Spirulina can cause significant decreases in CRP levels. However, more extensive and well-executed studies are still needed to draw definitive conclusions regarding this effectiveness.

Prospects and challenges of thermal hydrolysis pretreatment of microalgae for enhancing bioenergy and resource recovery in anaerobic bioprocesses

Microalgae have emerged as a promising feedstock for bioenergy production through anaerobic digestion and fermentation, gaining significant attention due to their rapid growth rate, ability to adapt to diverse environments, and rich biochemical composition. However, the recalcitrant nature of the microalgal cell wall necessitates pretreatment to enhance the accessibility of intracellular components and improve overall bioenergy yields from anaerobic digestion/fermentation. Among the various pretreatment methods, the thermal hydrolysis process has proven to be a promising strategy for enhancing the efficiency of bioenergy recovery from microalgal biomass. The benefits of thermal hydrolysis pretreatment of microalgae include improved organic matter solubilization, enhanced digestibility, and increased product yields in subsequent anaerobic digestion/fermentation processes for biomethane, biohydrogen, and volatile fatty acids production. However, thermal pretreatment poses challenges, such as forming future research by-products like furfural and ammonia, which can adversely affect microbial activities and reduce process efficiency. Thus, addressing its associated challenges is critical for maximizing its effectiveness in bioenergy and resource recovery. This review provides a comprehensive analysis of these challenges and offers recommendations for future research, emphasizing the need for optimized pretreatment strategies for advancing the sustainable and efficient use of microalgae in bioenergy production.

Phycochemistry and pharmacological significance of filamentous cyanobacterium Spirulina sp

The cyanobacterium, Spirulina sp. is a photosynthetic blue-green alga with essential nutrients, vitamins nucleic acids, proteins, carbohydrates, fatty acids and pigments carotenes; and phycocyanins are the significant components having immunomodulatory, anti-inflammatory properties, which are used in food and cosmetics industries. Spirulina sp. can play an important role in human and animal nutrition for potential health benefits due to their phycochemical and pharmaceutical significance. This study highlights antibacterial, antifungal, antiviral, antioxidant, nephroprotective, cardioprotective, anticancer, neuroprotective, anti-aging, anti-inflammatory, and immunomodulatory properties. It highlights anti-anemic, antidiabetic, probiotic, anti-malarial, anti-obesity and weight loss, anti-genotoxicity, anti-thrombic, radioprotective, and detoxifying effects of Spirulina sp. Pharmaceutical studies indicate it may improve heart health and add to the treatment of diabetes, obesity and weight loss. It can play a major role in protecting the environment by recycling wastewater and providing food for humans and animals. Spirulina sp. can supply ingredients for aquaculture and agricultural feeds, pigments, antioxidants, and essential omega-3 oils, among other human health and wellness products. The amino acid of Spirulina is among the greatest qualititavely of any plant, even higher than that of soybean. Furthermore, cyanobacterium Spirulina sp. could be a future antimicrobial drug agent.

Valorization of Algal Biomass to Produce Microbial Polyhydroxyalkanoates: Recent Updates, Challenges, and Perspectives

Biopolymers are highly desirable alternatives to petrochemical-based plastics owing to their biodegradable nature. The production of bioplastics, such as polyhydroxyalkanoates (PHAs), has been widely reported using various bacterial cultures with substrates ranging from pure to biowaste-derived sugars. However, large-scale production and economic feasibility are major limiting factors. Now, using algal biomass for PHA production offers a potential solution to these challenges with a significant environmental benefit. Algae, with their unique ability to utilize carbon dioxide as a greenhouse gas (GHG) and wastewater as feed for growth, can produce value-added products in the process and, thereby, play a crucial role in promoting environmental sustainability. The sugar recovery efficiency from algal biomass is highly variable depending on pretreatment procedures due to inherent compositional variability among their cell walls. Additionally, the yields, composition, and properties of synthesized PHA vary significantly among various microbial PHA producers from algal-derived sugars. Therefore, the microalgal biomass pretreatments and synthesis of PHA copolymers still require considerable investigation to develop an efficient commercial-scale process. This review provides an overview of the microbial potential for PHA production from algal biomass and discusses strategies to enhance PHA production and its properties, focusing on managing GHGs and promoting a sustainable future.

Enhanced biomethane production from Scenedesmus sp. using polymer harvesting and expired COVID-19 disinfectant for pretreatment

This study evaluates the repurposing of expired isopropanol (IPA) COVID-19 disinfectant (64% w/w) to pretreat algal biomass for enhancing methane (CH4) yield. The impact of harvesting methods (centrifugation and polymer flocculation) and microwave pretreatment on CH4 production from Scenedesmus sp. microalgal biomass were also investigated. Results show minimal impact of harvesting methods on the CH4 yield, with wet centrifuged and polymer-harvested biomass exhibiting comparable and low CH4 production at 66 and 74 L/kgvolatile solid, respectively. However, microalgae drying significantly increased CH4 yield compared to wet biomass, attributed to cell shrinkage and enhanced digestibility. Consequently, microwave and IPA pretreatment significantly enhanced CH4 production when applied to dried microalgae, yielding a 135% and 212% increase, respectively, compared to non-pretreated wet biomass. These findings underscore the advantage of using dried Scenedesmus sp. over wet biomass and highlight the synergistic effect of combining oven drying with IPA treatment to boost CH4 production whilst reducing COVID-19 waste.

Algae-Based Biopolymers for Batteries and Biofuel Applications in Comparison with Bacterial Biopolymers-A Review

Algae-based biopolymers can be used in diverse energy-related applications, such as separators and polymer electrolytes in batteries and fuel cells and also as microalgal biofuel, which is regarded as a highly renewable energy source. For these purposes, different physical, thermochemical, and biochemical properties are necessary, which are discussed within this review, such as porosity, high temperature resistance, or good mechanical properties for batteries and high energy density and abundance of the base materials in case of biofuel, along with the environmental aspects of using algae-based biopolymers in these applications. On the other hand, bacterial biopolymers are also often used in batteries as bacterial cellulose separators or as biopolymer network binders, besides their potential use as polymer electrolytes. In addition, they are also regarded as potential sustainable biofuel producers and converters. This review aims at comparing biopolymers from both aforementioned sources for energy conversion and storage. Challenges regarding the production of algal biopolymers include low scalability and low cost-effectiveness, and for bacterial polymers, slow growth rates and non-optimal fermentation processes often cause challenges. On the other hand, environmental benefits in comparison with conventional polymers and the better biodegradability are large advantages of these biopolymers, which suggest further research to make their production more economical.

A novel rice hull - microalgal biorefinery for the production of natural phenolic compounds comprising of rice hull acid pretreatment and a two-stage Botryococcus braunii cultivation process

Recently, the rising demand of the industry for natural phenolic antioxidant compounds has turned to the study of microalgae as potential sources. Yet, more economic substrates for microalgal cultivation are sought to lower production costs. To this end, the present work deals with the utilization of rice hull hydrolysate (RHH) as substrate for microalgae Botryococcus braunii through a novel two-stage cultivation system. Initially, RHH was optimized to maximize the contained nutrients while minimizing its inhibitors content. The optimum point was reached under 121 °C, 60 min, 2% (v/v) H2SO4, 30% (w/v) loading. Next, B. braunii was successfully grown first heterotrophically in RHH (25%, v/v), obtaining high biomass production (6.67 g L-1) and then autotrophically to enhance phenolics accumulation. At the end, a high phenolic content of 7.44 ± 0.60 mg Gallic Acid Equivalents g-1 DW was achieved from the produced biomass, thus highlighting the potential of this novel biotechnological method.

Comprehensive review on recent production trends and applications of biochar for greener environment

The suitability of biochar as a supplement for environmental restoration varies significantly based on the type of feedstocks used and the parameters of the pyrolysis process. This study comprehensively examines several aspects of biochar's potential benefits, its capacity to enhance crop yields, improve nutrient availability, support the co-composting, water restoration and enhance overall usage efficiency. The supporting mechanistic evidence for these claims is also evaluated. Additionally, the analysis identifies various gaps in research and proposes potential directions for further exploration to enhance the understanding of biochar application. As a mutually advantageous approach, the integration of biochar into agricultural contexts not only contributes to environmental restoration but also advances ecological sustainability. The in-depth review underscores the diverse suitability of biochar as a supplement for environmental restoration, contingent upon the specific feedstock sources and pyrolysis conditions used. However, concerns have been raised regarding potential impacts on human health within agricultural sectors.

Algae biogas production focusing on operating conditions and conversion mechanisms - A review

Global warming is the result of traditional fuel use and manufacturing, which release significant volumes of CO₂ and other greenhouse gases from factories. Moreover, rising energy consumption, anticipated limitations of fossil fuels in the near future, and increased interest in renewable energies among scientists, currently increase research in biofuels. In contrast to biomass from urban waste materials or the land, algae have the potential to be a commercially successful aquatic energy crop, offering a greater energy potential. Here we discuss the importance of Anaerobic Digestion (AD) for enhanced biogas yield, characterization, and comparisons between algae pretreatment methods namely, mechanical, thermal, microwave irradiation, and enzymatic and catalytic methods. The importance of anaerobic digestion enhances biogas yield, characterization, and comparisons between mechanical, thermal, microwave irradiation, and enzymatic and catalytic treatment. Additionally, operational aspects such as algal species, temperature, C/N ratio, retention period, and particle size impact biofuel yield. The highest algal biogas yield reported was 740 mL/gVS, subtracted from Taihu de-oiled algae applying thermos-chemical pretreatment under conditions of temperature, time, and catalyst concentration of 70 °C, 3 h, and 6%, respectively. Another high yield of algal-based biogas was obtained from Laminaria sp. with mechanical pretreatment under temperature, time, and VS concentration of 38 ± 1 °C, 15 min, and 2.5% respectively, with a maximum yield of 615 ± 7 mL/g VS. Although biofuels derived from algae species are only partially commercialized, the feedstock for biogas might soon be commercially grown. Algae and other plant species that could be cultivated on marginal lands as affordable energy crops with the potential to contribute to the production of biogas are promising and are already being worked on.

Microplastics reduce microalgal biomass by decreasing single-cell weight: The barrier towards implementation at scale

Microplastics (MPs) are a widespread environmental threat, especially to aquatic and urban systems. Water quality is vital for biomass production in microalgal-based industries. Here, industrially relevant microalgae Tetraselmis suecica, Scenedesmus armatus, and Nannochloropsis gaditana were exposed to PS- and PE-MPs (polystyrene and polyethylene, respectively - 10-20 μm) contaminated waters (5 and 10 mg/L). Following industrial empirical and ecotoxicological procedures, the production period was established as four days (exponential growth phase). 27-long day experiments were conducted to determine the chronic effects of MPs contamination in microalgal biomass yields. MPs induced different responses in cell density: T. suecica decreased (up to 11 %); S. armatus showed no changes; and N. gaditana increased (up to 6 %). However, all three microalgae exhibited significant decreases in biomass production (up to 24, 48, and 52 %, respectively). S. armatus exposed to PS-MPs and N. gaditana exposed to PE-MPs were the most impacted regarding biomass production. The decrease in biomass yield was due to the reduction in single-cell weight (up to 14, 47, and 43 %), and/or the production of smaller-sized cells (T. suecica). In response to chronic exposure, microalgae showed signs of cell density adaptation. Despite cell density normalizing, biomass production was still reduced compared to biomass production in clean water. Computational modelling highlighted that MPs exposure had a concentration-dependent negative impact on microalgae biomass. The models allow the evaluation of the systematic risks that MPs impose in microalgal-based industries and stimulate actions towards implementing systems to contain/eliminate MPs contamination in the waters used in microalgae production.

Emerging microalgae-based biofuels: Technology, life-cycle and scale-up

Microalgae biomass is a versatile feedstock with a variable composition that can be submitted to several conversion routes. Considering the increasing energy demand and the context of third-generation biofuels, algae can fulfill the increasing global demand for energy with the additional benefit of environmental impact mitigation. While biodiesel and biogas are widely consolidated and reviewed, emerging algal-based biofuels such as biohydrogen, biokerosene, and biomethane are cutting-edge technologies in earlier stages of development. In this context, the present study covers their theoretical and practical conversion technologies, environmental hotspots, and cost-effectiveness. Scaling-up considerations are also addressed, mainly through Life Cycle Assessment results and interpretation. Discussions on the current literature for each biofuel directs researchers towards challenges such as optimized pretreatment methods for biohydrogen and optimized catalyst for biokerosene, besides encouraging pilot and industrial scale studies for all biofuels. While presenting studies for larger scales, biomethane still needs continuous operation results to consolidate the technology further. Additionally, environmental improvements on all three routes are discussed in light of life-cycle models, highlighting the ample research opportunities on wastewater-grown microalgae biomass.

Current and prognostic overview on the strategic exploitation of anaerobic digestion and digestate: A review

The depletion of fossil fuels and increasing demand for energy are encountered by generating renewable biogas. Anaerobic digestion (AD) produces not only biogas, also other value-added products from the digestate using various organic, municipal and industrial wastes which have several benefits like remediating waste, reduces greenhouse gas emissions, renewable energy generation and securing socio-economic status of bio-based industries. This review work critically analyzes the biorefinery approaches on AD process for the production of biogas and digestate, and their direct and indirect utilization. The left-out residue obtained from AD is called 'digestate' which enriched with organic matter, nitrogen, heavy metals and other valuable micronutrients. However, the direct disposal of digestate to the land as fertilizer/landfills creates various environmental issues. Keeping this view, the digestate should be upgraded or transformed into high valued products such as biofertilizer, pyrochar, biodiesel, syngas and soil conditioner that can aid to enrich the soil nutrients and ensures the safe environment as well. In this context, the present review focused to illustrate the current techniques and different strategic exploitations on AD proper management of digestate products for storage and further applications. Such a technology transfer provides a proven strategic mechanism towards the enhancement of the sustainability of bio-based industries, attaining the energy demand, safest waste management, protection of environment and reduces the socio-economic issues of the industrial sector.

Fermentation Wastes from Chrypthecodinium cohnii Lipid Production for Energy Recovery by Anaerobic Digestion

Wastes generated during the cultivation of marine microalga Crypthecodinium cohnii and after the lipid extraction process, were energetically valorized into biogas production through anaerobic digestion (AD). The tested wastes were extracted microalgae (Ae) with hexane (AeH) using supercritical extraction methods (AeS) and the supernatant obtained after culture medium centrifugation (M). The digestion of the algae biomass in the admixture with the supernatant medium (AeH+M+I and AeS+M+I) provided a higher methane content and a higher methane yield (582 and 440 L CH4/kg VS) than the substrates Ae and M, individually digested (155 and 96 L CH4/kg VS, respectively). Flow cytometry monitoring processes during AD indicated that the yield of the accumulated biogas was influenced by the operating conditions. The mixture of AeH+M+I was the only assay with a proportion of cells with less damaged membranes after AD, providing the highest methane yield and productivity (582 L CH4/kg VS and 31 L CH4/kg VS.d, respectively) and the highest energetic potential of 5.8 KWh/kg VS of all the substrates. From the results, AD integration to lipid production by C. cohnii to recover energy from the generated wastes enhanced the sustainability of the entire process and promoted the practice of zero waste.

Phase separated pretreatment strategies for enhanced waste activated sludge disintegration in anaerobic digestion: An outlook and recent trends

A significant ecological problem was developed on disposing the enormous amounts of waste activated sludge (WAS) produced by traditional wastewater treatment. There have been various attempts recently originated to develop innovative methods for substantial sludge treatment. The most frequently used approach for treating sludge to produces methane and reduces sludge is anaerobic treatment. The hydrolysis phase in WAS limits the breakdown of complex macrobiotic compounds. The presence of extracellular polymeric substances (EPS) in biomass prevents the substrate from being hydrolyzed. Enhancing substrate hydrolysis involves removal of EPS preceded by phase separated pretreatment. Hence, a critical assessment of various phase separated pretreatment that has a remarkable effect on the anaerobic digestion process was documented in detail. Moreover, the economic viability and energy requirement of this treatment process was also discussed. Perspectives and recommendations for methane production were also provided to attain effectual sludge management.

A review on unit operations, challenges, opportunities, and strategies to improve algal based biodiesel and biorefinery

Globally, the demand for energy is increasing with an emphasis on green fuels for a sustainable future. As the urge for alternative fuels is accelerating, microalgae have emerged as a promising source that can not only produce high lipid but many other platform chemicals. Moreover, it is a better alternative in comparison to conventional feedstock due to yearlong easy and mass cultivation, carbon fixation, and value-added products extraction. To date, numerous studies have been done to elucidate these organisms for large-scale fuel production. However, enhancing the lipid synthesis rate and reducing the production cost still remain a major bottleneck for its economic viability. Therefore, this study compiles information on algae-based biodiesel production with an emphasis on its unit operations from strain selection to biofuel production. Additionally, strategies to enhance lipid accumulation by incorporating genetic, and metabolic engineering and the use of leftover biomass for harnessing bio-products have been discussed. Besides, implementing a biorefinery for extracting oil followed by utilizing leftover biomass to generate value-added products such as nanoparticles, biofertilizers, biochar, and biopharmaceuticals has also been discussed.

Microalgae and Cyanobacteria Biomass Pretreatment Methods: A Comparative Analysis of Chemical and Thermochemical Pretreatment Methods Aimed at Methane Production

Anaerobic digestion of microalgae and cyanobacteria was first proposed as a destination for algal biomass accumulated on stabilization ponds since it could not be disposed of directly in the environment. Now, the versatility of algal biomass makes them a suitable candidate to produce biofuels and other biomolecules in biorefineries. Anaerobic digestion of biomass is advantageous because it does not require the extraction of specific cellular constituents or drying of the biomass. Nevertheless, challenges remain regarding biomass concentration and their resistant cell walls, which are factors that could hamper methane yield. Many pretreatment methods, including chemical and thermochemical, have been proposed to break down the complex polymers present on the cell wall into smaller molecules. Unfortunately, the relationship between biomass solubilization and methane yield is not well defined. This article intends to review the anaerobic digestion of algal biomass and the role of chemical and thermochemical pretreatments in enhancing methane production. Several pretreatment conditions selected from the scientific literature were compared to verify which conditions actually improve methane yield. The severity of the selected pretreatments was also assessed using the combined severity factor. Results suggest that thermochemical pretreatment in less severe conditions is the most efficient, leading to a greater increase in methane yield. Only enzymatic pretreatments and some thermal pretreatments result in a positive energy balance. The large-scale implementation of pretreatment methods requires technological innovations to reduce energy consumption and its integration with other processes in wastewater treatment plants.

Integrated role of algae in the closed-loop circular economy of anaerobic digestion

Following the surging demand for sustainable biofuels, biogas production via anaerobic digestion (AD) presented itself as a solution for energy security, waste management, and greenhouse gas mitigation. Algal-based biorefinery platform serves an important role in the AD-based closed-loop circular economy. Other than using whole biomass of micro- and macroalgae as feedstock for biogas production, the integration of AD with other bio- or thermochemical conversion techniques can achieve complete valorization of biomass residue after processing or valuable compounds extraction. On the other hand, anaerobic digestate, the byproduct of AD processes can be used for microalgal cultivation for lipid and pigments accumulation, closing the loop of resource flow. Furthermore, algae and its consortium with bacteria or fungi can be employed for combined biogas upgrading and wastewater treatment. Innovative strategies have been developed to enhance biogas upgrading and pollutant removal performance as well as minimize O₂ and N₂ content in the upgraded biomethane.

Co-Fermentation of Microalgae Biomass and Miscanthus × giganteus Silage—Assessment of the Substrate, Biogas Production and Digestate Characteristics

The development of a sustainable bioenergy market is currently largely fueled by energy crops, whose ever-increasing production competes with the global food and feed supply. Consequently, non-food crops need to be considered as alternatives for energy biomass production. Such alternatives include microalgal biomass, as well as energy crops grown on non-agricultural land. The aim of the present study was to evaluate how co-digestion of microalgal biomass with giant miscanthus silage affects feedstock properties, the biogas production process, biogas yields, methane fractions and the digestate profile. Combining giant miscanthus silage with microbial biomass was found to produce better C/N ratios than using either substrate alone. The highest biogas and methane production rates—628.00 ± 20.05 cm3/gVS and 3045.56 ± 274.06 cm3 CH4/d—were obtained with 40% microalgae in the feedstock. In all variants, the bulk of the microbial community consisted of bacteria (EUB338) and archaea (ARC915).

Impact of novel deflocculant ZnO/Chitosan nanocomposite film in disperser pretreatment enhancing energy efficient anaerobic digestion: Parameter assessment and cost exploration

This paper proposed to interpret the novel method of extracellular polymeric substance (EPS) removal in advance to sludge disintegration to enrich bioenergy generation. The sludge has been subjected to deflocculation using Zinc oxide/Chitosan nanocomposite film (ZCNF) and achieved 98.97% of solubilization which enhance the solubilization of organics. The obtained result revealed that higher solubilization efficiency of 23.3% was attained at an optimal specific energy of 2186 kJ/kg TS and disintegration duration of 30 min. The deflocculated sludge showed 8.2% higher solubilization than the flocculated sludge emancipates organics in the form of 1.64 g/L of SCOD thereby enhancing the methane generation. The deflocculated sludge produces methane of 230 mL/g COD attained overall solid reduction of 55.5% however, flocculated and control sludge produces only 182.25 mL/g COD and 142.8 mL/g COD of methane. Based on the energy, mass and cost analysis, the deflocculated sludge saved 94.1% of energy than the control and obtained the net cost of 5.59 $/t which is comparatively higher than the flocculated and control sludge.

Algal-based system for removal of emerging pollutants from wastewater: A review

The bioremediation of emerging pollutants in wastewater via algal biotechnology has been emerging as a cost-effective and low-energy input technological solution. However, the algal bioremediation technology is still not fully developed at a commercial level. The development of different technologies and new strategies to cater specific needs have been studied. The existence of multiple emerging pollutants and the selection of microalgal species is a major concern. The rate of algal bioremediation is influenced by various factors, including accidental contaminations and operational conditions in the pilot-scale studies. Algal-bioremediation can be combined with existing treatment technologies for efficient removal of emerging pollutants from wastewater. This review mainly focuses on algal-bioremediation systems for wastewater treatment and pollutant removal, the impact of emerging pollutants in the environment, selection of potential microalgal species, mechanisms involved, and challenges in removing emerging pollutants using algal-bioremediation systems.

Biocomposites Using Whole or Valuable Component-Extracted Microalgae Blended with Polymers: A Review

Global demand for plastics has increased steadily alongside industrial development. Despite their versatility and convenience, environmental pollution caused by plastics are a major issue. With a reduction in the market size of plastics being seemingly impossible, bioplastics may become key to tackle this issue. Among a wide range of sources of bioplastics, microalgae have come into the limelight. While abundant and valuable components in microalgae have the potential to replace preexisting plastics, complex processes and low cost performances have prevented them from entering the market. In this study, we examined techniques for biocomposites in which polymers are blended with microalgae. We focused on microalgae-based biocomposite blending processed from the perspective of functionality and cost performance.

Microalgae for high-value products: A way towards green nutraceutical and pharmaceutical compounds

Microalgae is a renewable bioresource with the potential to replace the conventional fossil-based industrial production of organic chemicals and pharmaceuticals. Moreover, the microalgal biomass contains carotenoids, vitamins, and other biomolecules that are widely used as food supplements. However, the microalgal biomass production, their composition variations, energy-intensive harvesting methods, optimized bio-refinery routes, and lack of techno-economic analysis are the major bottleneck for the life-sized commercialization of this nascent bio-industry. This review discusses the microalgae-derived key bioactive compounds and their applications in different sectors for human health. Furthermore, this review proposes advanced strategies to enhance the productivity of bioactive compounds and highlight the key challenges associated with a safety issue for use of microalgae biomass. It also provides a detailed global scenario and market demand of microalgal bioproducts. In conclusion, this review will provide the concept of microalgal biorefinery to produce bioactive compounds at industrial scale platform for their application in the nutraceutical and pharmaceutical sector considering their current and future market trends.