Combustion kinetics of hydrochar from cow-manure digestate via thermogravimetric analysis and peak deconvolution

Kinetic investigation on the catalytic pyrolysis of plastic fractions of waste electrical and electronic equipment (WEEE): A mathematical deconvolution approach

Waste electrical and electronic equipment (WEEE) has become a critical environmental problem. Catalytic pyrolysis is an ideal technique to treat and convert the plastic fraction of WEEE into chemicals and fuels. Unfortunately, research using real WEEE remains relatively limited. Furthermore, the complexity of WEEE complicates the analysis of its pyrolytic kinetics. This study applied the Fraser-Suzuki mathematical deconvolution method to obtain the pseudo reactions of the thermal degradation of two types of WEEE, using four different catalysts (Al2O3, HBeta, HZSM-5, and TiO2) or without a catalyst. The main contributor(s) to each pseudo reaction were identified by comparing them with the pyrolysis results of the pure plastics in WEEE. The nth order model was then applied to estimate the kinetic parameters of the obtained pseudo reactions. In the low-grade electronics pyrolysis, the pseudo-1 reaction using TiO2 as a catalyst achieved the lowest activation energy of 92.10 kJ/mol, while the pseudo-2 reaction using HZSM-5 resulted in the lowest activation energy of 101.35 kJ/mol among the four catalytic cases. For medium-grade electronics, pseudo-3 and pseudo-4 were the main reactions for thermal degradation, with HZSM-5 and TiO2 yielding the lowest pyrolytic activation energies of 75.24 and 226.39 kJ/mol, respectively. This effort will play a crucial role in comprehending the pyrolysis kinetic mechanism of WEEE and propelling this technology toward a brighter future.

Putting Biochar in Action: A Black Gold for Efficient Mitigation of Salinity Stress in Plants. Review and Future Directions

Soil salinization is a serious concern across the globe that is negatively affecting crop productivity. Recently, biochar received attention for mitigating the adverse impacts of salinity. Salinity stress induces osmotic, ionic, and oxidative damages that disturb physiological and biochemical functioning and nutrient and water uptake, leading to a reduction in plant growth and development. Biochar maintains the plant function by increasing nutrient and water uptake and reducing electrolyte leakage and lipid peroxidation. Biochar also protects the photosynthetic apparatus and improves antioxidant activity, gene expression, and synthesis of protein osmolytes and hormones that counter the toxic effect of salinity. Additionally, biochar also improves soil organic matter, microbial and enzymatic activities, and nutrient and water uptake and reduces the accumulation of toxic ions (Na+ and Cl), mitigating the toxic effects of salinity on plants. Thus, it is interesting to understand the role of biochar against salinity, and in the present Review we have discussed the various mechanisms through which biochar can mitigate the adverse impacts of salinity. We have also identified the various research gaps that must be addressed in future study programs. Thus, we believe that this work will provide new suggestions on the use of biochar to mitigate salinity stress.

Industrial Two-Phase Olive Pomace Slurry-Derived Hydrochar Fuel for Energy Applications

The present study aims to resolve the existing research gaps on olive pomace (OP) hydrochars application as a fuel by evaluating its molecular structures (FTIR and solid NMR analysis), identifying influential characteristics (Pearson correlation analysis), process optimization (response surface methodology), slagging-fouling risks (empirical indices), and combustion performance (TG-DSC analysis). The response surfaces plot for hydrothermal carbonization (HTC) of OP slurry performed in a pressure reactor under varied temperatures (180-250 °C) and residence times (2-30 min) revealed 250 °C for 30 min to be optimal conditions for producing hydrochar fuel with a higher heating value (32.20 MJ·Kg-1) and energy densification ratio (1.40). However, in terms of process efficiency and cost-effectiveness, the optimal HTC conditions for producing the hydrochar with the highest energy yield of 87.9% were 202.7 °C and 2.0 min. The molecular structure of hydrochar was mainly comprised of aromatic rings with methyl groups, alpha-C atoms of esters, and ether bond linkages of lignin fractions. The slagging and fouling risks of hydrochars were comparatively lower than those of raw OP, as indicated by low slagging and fouling indices. The Pearson correlation analysis emphasized that the enrichment of acid-insoluble lignin and extractive contents, carbon densification, and reduced ash content were the main pivotal factors for hydrochar to exhibit better biofuel characteristics for energy applications.

Influence of microplastics and environmentally persistent free radicals on the ability of biochar components to promote degradation of antibiotics by activated peroxymonosulfate

Microplastics (MPs) in sludge can affect the ability of biochar-activated peroxymonosulfate (PMS) to degrade antibiotics. In this work, biochar was prepared by mixing sludge and polystyrene (PS) through hydrothermal carbonization (HTC) and high-temperature pyrolysis processes. The resulting biochar was used to activate PMS to degrade ofloxacin (OFX), levofloxacin (LEV), and pefloxacin (PFX). The addition of PS significantly enhanced the ability of biochar/PMS to degrade antibiotics and the levels of environmentally persistent free radicals (EPFRs, 4.59 × 1020 spin/g) due to the decomposition of PS. The addition of PS resulted in a slight decrease in the specific surface area of biochar (2-3 m2/g on average), but a significant increase in the concentration of EPFRs increased the removal efficiency. The activation of PMS by biochar is dominated by free radicals, accounting for about 70%, in which SO4•- and •OH contribute the most and O2•- the least. However, 1O2 contributes 15-20% to the degradation of antibiotics in non-free radical processes. Overall, the process of biochar/PMS degradation of antibiotics is mainly dominated by free radicals, and the effect of non-free radicals is not obvious. Both hydrochar and pyrocarbon samples showed good hydrophilicity, and this property should improve the ability of active sites on biochar to degrade antibiotics. In the HTC process, PS can decompose during hydrochar preparation, with a maximum reduction value of 40.09%. The three-dimension excitation emission matrix fluorescence spectroscopy (3D-EEM) and total organic carbon (TOC) results show that the protein content in sludge plays a major role in reducing PS, with little effect of polysaccharide and SiO2. There are six to seven degradation intermediates of quinolone antibiotics, which are eventually degraded into CO2, H2O, and inorganic substances. The regeneration experiment showed good reusability of hydrochar and pyrocarbon, further demonstrating the suitability of biochar for the degradation of antibiotics.

Potential Application Performance of Hydrochar from Kitchen Waste: Effects of Salt, Oil, Moisture, and pH

The surge in kitchen waste production is causing food-borne disease epidemics and is a public health threat worldwide. Additionally, the effectiveness of conventional treatment approaches may be hampered by KW's high moisture, salt, and oil content. Hydrothermal carbonization (HTC) is a promising new technology to convert waste biomass into environmentally beneficial derivatives. This study used simulated KW to determine the efficacy of hydrothermal derivatives (hydrochar) with different salt and oil content, pH value, and solid-liquid ratio for the removal of cadmium (Cd) from water and identify their high heating value (HHV). The findings revealed that the kitchen waste hydrochar (KWHC) yield decreased with increasing oil content. When the water content in the hydrothermal system increased by 90%, the yield of KWHC decreased by 65.85%. The adsorption capacity of KWHC remained stable at different salinities. The KWHC produced in the acidic environment increases the removal efficiency of KWHC for Cd. The raw material was effectively transformed into a maximum HHV (30.01 MJ/kg). HTC is an effective and secure method for the resource utilization of KW based on the adsorption capacity and combustion characteristic indices of KWHC.