Ball milling potassium ferrate activated biochar for efficient chromium and tetracycline decontamination: Insights into activation and adsorption mechanisms

Sodium salt promoted the generation of nano zero valent iron by carbothermal reduction: For activating peroxydisulfate to degrade antibiotic

Carbothermal reduction is a promising method for the industrial preparation of nano-zero-valent iron. Preparing it also involves very high pyrolysis temperatures, which leads to a significant amount of energy consumption. The temperature required for the preparation of nano-zero-valent iron by carbothermal reduction was reduced by 200 °C by the addition of sodium salt. Carbon-loaded nano zero-valent iron (Fe0/CB-Na) was prepared by carbothermal reduction through the addition of sodium salt. The results showed that Fe0/CB-Na@700 had the same activation performance as Fe0/CB@900 and the newly prepared nano-zero-valent iron. The addition of sodium salt promoted the transfer of oxygen from the iron oxide to the carbon structure during the roasting process so that the iron oxide was reduced to as much Fe0 as possible. Thus, sodium salts were optimized for the preparation of nano-zero-valent iron by carbothermal reduction through interfacial amorphization and oxygen transfer, thus reducing the preparation cost.

Advances in Fe-modified lignocellulosic biochar: Impact of iron species and characteristics on wastewater treatment

Lignocellulosic biomass is an attractive feedstock for biochar production owing to its high abundance and renewability. Various modified biochars have been extensively studied for wastewater treatment to improve the physical and chemical properties of lignocellulosic biochar (L-BC). Particularly, Fe-modified L-BCs have garnered attention owing to the abundance and eco-friendliness of Fe and the outstanding ability to remove various organic and inorganic contaminants via adsorption, oxidation, reduction, and catalytic reactions. Different iron species (e.g., Fe(0), Fe (hydr)oxide, Fe sulfide, and Fe-Metal) are formed during the preparation of Fe-L-BCs, which can completely differentiate the physical and chemical properties of BCs. This review discusses the advances in the synthesis of different Fe-L-BCs, specific changes in the physical and chemical properties of Fe-L-BCs upon Fe addition, and their impacts on wastewater treatment. The results of this review can demonstrate the unique advantages and drawbacks of Fe-L-BCs for the removal of different types of pollutants.

Adsorption behavior of lead, cadmium, and arsenic on manganese-modified biochar: competition and promotion

Biochar adsorption of heavy metals has been a research hotspot, yet there has been limited reports on the effect of heavy metal interactions on adsorption efficiency in complex systems. In this study, the adsorbent was prepared by pyrolysis of rice straw loaded with manganese (BC-Mn). The interactions of Pb, Cd and As adsorption on BC-Mn were systematically studied. The results of the adsorption isotherms for the binary metal system revealed a competitive adsorption between Pb and Cd, resulting in decreased Pb (from 214.38 mg/g to 148.20 mg/g) and Cd (from 165.73 mg/g to 92.11 mg/g). A notable promotion occurred between As and Cd, showing an increase from 234.93 mg/g to 305.00 mg/g for As and 165.73 mg/g to 313.94 mg/g for Cd. In the ternary metal system, Pb inhibition did not counteract the promotion of Cd and As. Furthermore, the Langmuir isotherm effectively described BC-Mn's adsorption process in monometallic, binary, and ternary metal systems (R2 > 0.9294). Zeta and FTIR analyses revealed simultaneous competition between Pb and Cd for adsorption on BC-Mn's -OH sites. XPS analysis revealed that As adsorption by BC-Mn facilitated the conversion of MnO2 and MnO to MnOOH, resulting in increased hydroxyl radical production on BC-Mn's surface. Simultaneously, Cd combined with the adsorbed As to form ternary Cd-As-Mn complexes, which expedited the removal of Cd. These results help to provide theoretical support as well as technical support for the treatment of Pb-Cd-As contaminated wastewater.

Tetracycline Adsorption Performance and Mechanism Using Calcium Hydroxide-Modified Biochars

Tetracycline is frequently found in various environments and poses significant ecological risks. Calcium hydroxide-modified biochar has shown potential as a material for removing multiple classes of pollutants from wastewater streams. The tetracycline-adsorption performance and mechanism of alkali-modified biochars derived from nine wastes (corn straw, rice straw, swine manure, cypress powder, wheat straw, peanut shell, walnut shell powder, soybean straw, and corncobs) were investigated in the study. Among the four alkalis tested, calcium hydroxide exhibited the most effective modification effects at a pyrolysis temperature of 500 °C. Straw biomass was most suitable to be modified by calcium hydroxide, and calcium hydroxide-modified biochar showed the highest adsorption performance for tetracycline. The maximum adsorption capacities were 8.22 mg g-1 for pristine corn straw biochar and 93.46 mg g-1 for calcium hydroxide-modified corn straw biochar. The tetracycline adsorption mechanism by calcium hydroxide-modified corn straw biochar involved hydrogen bonding, oxygen-containing functional groups, Ca2+ metal complexation, and electrostatic attraction. Consequently, calcium hydroxide-modified corn straw biochar emerges as an environment-friendly, cost-effective, and efficient tetracycline adsorbent.

Activated Carbon with Ultrahigh Specific Surface Derived from Bamboo Shoot Shell through K2FeO4 Oxidative Pyrolysis for Adsorption of Methylene Blue

To effectively remove methylene blue (MB) from dye wastewater, a novel activated carbon (BAC) was manufactured through co-pyrolysis of bamboo shoot shell and K₂FeO₄. The activation process was optimized to a temperature of 750 °C and an activation time of 90 min based on its excellent adsorption capacity of 560.94 mg/g with a yield of 10.03%. The physicochemical and adsorption properties of BACs were investigated. The BAC had an ultrahigh specific surface area of 2327.7 cm²/g and abundant active functional groups. The adsorption mechanisms included chemisorption and physisorption. The Freundlich model could be used to describe the isothermal adsorption of MB. The kinetics confirmed that the adsorption of MB belonged to the pseudo-second-order model. Intra-particle diffusion was the main rate-limiting step. The thermodynamic study showed that the adsorption process was endothermic and temperature was beneficial for the improvement of adsorption property. Furthermore, the removal rate of MB was 63.5% after three cycles. The BAC will have great potential for commercial development for purifying dye wastewater.

Simultaneous adsorption of Cd(II) and degradation of OTC by activated biochar with ferrate: Efficiency and mechanism

Biochar-supported zero-valent iron nanocomposites have received much attention due to their application potential in environmental pollution remediation. However, in many occasions, zero-valent iron loading improves the electron transfer efficiency and catalytic oxidation capacity of biochar while blocking the original pore structure of biochar, limiting its application potential. In this study, a zero-valent iron composites with large SSA (865.86 m²/g) was prepared in one step using pre-pyrolysis of biochar powder and K₂FeO₄ grinding for co-pyrolysis. The processes of ZVI generation and SSA expansion during the pyrolysis were investigated. The factors affecting the removal process of Cd and OTC in water by the composites were investigated. The mechanisms of Cd fixation and OTC degradation by the composites were explored by experiments, characterization, and DFT calculations. The OTC degradation pathway was proposed by theoretical predication and LC-MS spectrometry. The results indicate that ion exchange, complexation with oxygen-containing functional groups, electrostatic attraction, and interaction with π-electrons are the main mechanisms of Cd immobilization. The degradation pathways of OTC mainly include dehydroxylation, deamination and dealkylation.

Twice-milled magnetic biochar: A recyclable material for efficient removal of methylene blue from wastewater

Although magnetic modification has potential for preparing recyclable biochar, the traditional preparation methods of loading magnetic materials on biochar will probably lead to pore blockage and consequently remarkable adsorption recession. Herein, a preparation method was developed in which ball milled biochar was loaded with ultrafine magnetite and then milled for a second time, thus generating a magnetic, recyclable biochar with minimal pore blockage. The deposits of magnetite did not significantly wrap the biochar, although a decreased sorption performance was still detectable. Benefitting from the extra milling step, surface functional groups and specific surface areas of the adsorbents were largely restored, thus leading to a 93.8 % recovery adsorption of 84.6 ± 2.5 mg/L on methylene blue. Meanwhile, the recyclability of the material was not affected. The adsorption was driven by multiple interactions. These twice-milled magnetic biochar is quite outstanding for sustainable removal of aqueous contaminants with its recyclability and high sorption efficiency.

Hexavalent chromium (Cr(VI)) removal by ball-milled iron-sulfur @biochar based on P-recovery: Enhancement effect and synergy mechanism

After the biochar recovery of phosphorus (P), its role in eliminating Cr(VI) is uncertain. In this study, the iron-sulfur biochar (Fe/S@BC) was made by grinding Fe⁰, S⁰, and biochar with a ball mill. P-loaded iron-sulfur biochar (P-Fe/S@BC) was produced after recovering P from simulated wastewater and then used to remove Cr(VI) contamination in waterbodies. P-Fe/S@BC got a rich pore structure and more reactive sites through P-recovery. The experiments revealed that P-Fe/S@BC had an enhancement effect on Cr(VI) pollution with removal efficiencies of 76.9 % ∼ 99.4 %, all greater than Fe/S@BC (58.2 %). In particular, 25P-Fe/S@BC (with 6.55 mg P/g) had the most significant advantage. The combination of physical adsorption, electrostatic attraction, and precipitation contributed to Cr(VI) removal. This is an efficient strategy for reusing Fe/S@BC followed by P-recovery, intending to improve the Cr(VI) removal effect and achieve the sustainable use of P resources and wastes.

In situ preparation of a multifunctional adsorbent by optimizing the Fe2+/Fe3+/Mn2+/HA ratio for simultaneous and efficient removal of Cd(II), Pb(II), Cu(II), Zn(II), As(III), Sb(III), As(V) and Sb(V) from aqueous environment: Behaviors and mechanisms

Multiple potentially toxic elements (PTEs) often coexist in practical wastewater environment, which poses serious risks to the ecological environment and human health. However, few of the reported adsorbents are capable of simultaneously and effectively removing multiple PTEs from wastewater due to the unique properties of each element. In this work, a multifunctional adsorbent FMHs was developed by optimizing Fe²⁺/Fe³⁺/Mn²⁺/HA ratio, and applied to remove Cd(II), Pb(II), Cu(II), Zn(II), As(III), Sb(III), As(V) and Sb(V) from aqueous solution. Results revealed that the adsorption data obeyed the Elovich, Sips and Redlich-Peterson models in the mono-component system, and the maximum adsorption capacity of FMHs was superior to most adsorbents reported in the literatures. In addition, FMHs retained considerable removal capacity after four cycles, and maintained excellent adsorption performance under the interference of different environmental factors (including pH, ionic strength, co-existing ions and humic acid). In the multi-component system, FMHs also presented high adsorption capacity for all the selected PTEs, especially for Sb(III/V) and Pb(II). Characterization results confirmed that various removal mechanisms, such as precipitation, surface complexation, ion exchange, electrostatic attraction and redox, were responsible for the capture of PTEs by FMHs.

Lanthanum-modified polydopamine loaded Acinetobacter lwoffii DNS32 for phosphate and atrazine removal: Insights into co-adsorption and biodegradation mechanisms

A novel biobased composite was developed for the removal of phosphate (P) and atrazine from agricultural wastewater. A composite with strong P affinity and good biocompatibility, synthesized from La³⁺ and polydopamine (PDA), was immobilized onto an atrazine-degrading bacterium Acinetobacter lwoffii DNS32 (La/PDA/DNS32). Following Box-Behnken design optimization, the maximum removal rate of P (500 mg L^-1) and atrazine (100 mg L^-1) by La/PDA/DNS32 reached 28 % and 100 %, respectively. Density functional theory calculations revealed that La/PDA had more negative adsorption energy (-5.90 eV) than PDA alone and exhibited prominent electrophilic sites. Additionally, La/PDA-induced sorption of atrazine improved transmembrane transport and enhanced expression of degradation-associated genes in strain DNS32. La/PDA nanoparticles surrounding strain DNS32 provided a shielding effect and exhibited desirable biostability, thermal stability, and acid-alkaline resistance under contamination stress. This study demonstrates the promising potential of La/PDA/DNS32 in reducing the P and atrazine pollution caused by agricultural production.

Effect of sulfur particle morphology on the performance of element sulfur-based denitrification packed-bed reactor

The effect of particle morphology on denitrification performance in element sulfur-based denitrification (ESDeN) packed-bed process is a gap. In this study, three different types of commercial sulfur particles were selected to build the ESDeN reactors. The results showed the reactors filled with rougher sulfur particles took shorter time to reach stable denitrification performance in the start-up stage. The reactors filled with cap-shape sulfur particles received the maximum nitrate removal rate of 849.49 ± 79.29 g N m^-3 d^-1 at empty bed contact time of 0.50 h, which was 2.34 times higher than that with ball-shape sulfur particles in the steady stage. The superior denitrification performance in the cap-shape particles set linked to its larger effective volumetric surface area (ω_e, 1.67 times larger) and to the longer actual hydraulic retention time (AHRT, 1.80 times longer). This study extends the knowledge of the dependency of sulfur particle properties on denitrification performance in ESDeN packed-bed reactor.

Polyethylenimine-grafted nitrogen-doping magnetic biochar for efficient Cr(VI) decontamination: Insights into synthesis and adsorption mechanisms

Herein, polyethylenimine (PEI)-grafted nitrogen (N)-doping magnetic biochar (PEI_MW@MNBC_BM) was synthesized, and characterization results showed that the microwave-assisted PEI grafting and ball milling-assisted N doping introduced abundant amino, pyridine N and pyrrole N structures onto biochar, which possessed high affinity to Cr(VI) in the anion form. The as-prepared PEI_MW@MNBC_BM displayed pH-dependence adsorption performance and high tolerance to co-existing ions with maximum uptake capacity of Cr(VI) identified as 183.02 mg/g. Furthermore, PEI_MW@MNBC_BM could bind Cr(VI) through electrostatic attraction, complexion, precipitation, reduction and pore filling. Especially, effective reduction of Cr(VI) was ascribed to cooperative electron transfer of partial oxygen-containing functional groups, intramolecular pyridine/pyrrole N, protonated amino and Fe²⁺ on the adsorbent, while oxygen-containing and amino functional groups from N-doping biochar and PEI synergistically complexed Cr(III) via providing lone pair electrons to form coordinate bonds. Furthermore, the stable precipitation was formed between Fe³⁺ and Cr(III). Additionally, the Cr(VI) elimination efficiency could maintain 95.83% even after four adsorption-desorption cycles, suggesting PEI_MW@MNBC_BM as a high-performance adsorbent for Cr(VI) contaminated water remediation.

Microwave-assisted synthesis of polyethylenimine-grafted nanocellulose with ultra-high adsorption capacity for lead and phosphate scavenging from water

Herein, polyethylenimine-grafted nanocellulose (PEI_MW@NC_MW) was synthetized through microwave-assisted synthesis, which was employed for Pb(II) and phosphate scavenging from water. Characterization results exhibited that the original pomegranate peel-derived cellulose could be transformed to nanometer level by microwave radiation and the amino groups were successfully grafted on the nanocellulose evenly. The adsorption performance of PEI_MW@NC_MW possessed outstanding improvements over that of original nanocellulose with maximum adsorption capacities reaching 916.02 mg/g for Pb(II) and 278.89 mg/g for phosphate. Furthermore, the PEI_MW@NC_MW had high tolerance to various co-existing ions and could maintain over 94% removal efficiency during four regeneration cycles. Additionally, the Pb(II) uptake onto PEI_MW@NC_MW was associated with electrostatic attraction, complexation and pore-filling, whereas high phosphate capture was achieved via H-bonding, complexation and electrostatic attraction. In summary, PEI_MW@NC_MW was deemed as a potential adsorbent with excellent adsorption capacity for remediation of Pb(II) and phosphate polluted water.

One-step preparation of Fe/N co-doped porous biochar for chromium(VI) and bisphenol a decontamination in water: Insights to co-activation and adsorption mechanisms

Herein, magnetic nitrogen doped porous biochar (Fe/N-PBC) was prepared by mixing KHCO₃, K₂FeO₄ and CO(NH₂)₂ through one-step pyrolysis, and was employed for adsorbing Cr(VI) and BPA in water. The whole co-activated process was accompanied with pore-forming, carbon thermal reduction and element doping. Specifically, the developed microporous structures and high surface area of Fe/N-PBC (1093.68 m²/g) were achieved under synergistic activation of KHCO₃ and K₂FeO₄. Meanwhile, carbon thermal reduction process successfully converted K₂FeO₄ to Fe⁰ with introduction of heterocyclic-N (pyrrolic N and pyridinic N) structures by CO(NH₂)₂ doping. Fe/N-PBC exhibited outstanding uptake for Cr(VI) (340.96 mg/g) and BPA (355.14 mg/g), and possessed favorable regeneration properties after three cycles. Notably, the high-performance Cr(VI) removal was associated to reduction, electrostatic interaction, complexation, pore filling and ion exchange, while pore filling, hydrogen-bonding interaction and π-π stacking were responsible for BPA binding. This work presents reasonable design of Fe/N-carbon materials for Cr(VI)/BPA polluted water remediation.