Nanoporous biochar with high specific surface area based on rice straw digestion residue for efficient adsorption of mercury ion from water

Digestate-based organic amendment substitution improves the red soil quality and pakchoi yield

This study investigated the effect of the partially substituting chemical fertilizers (CF) with digestate-based organic amendment (OA) on the amelioration of red soil and the growth of plant. OA with nitrogen substitution rates ranging from 10 % to 40 % were mixed with CF and applied to red soil in a pot experiment. The results indicated that plant growth was significantly enhanced in the treatment where 20 % of the CF was substituted with the OA (OA20) compared to other treatments (p < 0.05). Specifically, the OA20 treatment increased nutrient use efficiency by 54.76 %-100.42 % compared to the treatment using only CF. Furthermore, all OA treatments improved the quality of red soil, with the nutrient content significantly higher in the OA20 group than in the other treatments (p < 0.05). The parameters of total phosphorus (TP), available nitrogen (AN), available phosphorus (AP), and total potassium (TK) significantly affected the soil quality index and plant growth, serving as reliable indicators of soil quality and plant yield. Microbial analysis revealed that the bacterial Chao index and the abundance of microorganisms involved in C-N nutrient cycling, such as Chryseolinea and norank_f__norank_o__Actinomarinales, were highest in the OA20 group. Significant correlations were observed between soil nutrient content (AN, AP, and TK) and the abundance of norank_f__norank_o__Actinomarinales and Chryseolinea, indicating their close relationship with pakchoi growth. Consequently, digestate-based OA may positively affect plant growth in acidic ecosystems by enhancing soil properties, inducing shifts in microbial community composition, and promoting the enrichment of potentially beneficial bacteria. This study provides valuable insights for the enhancement of low-quality soils and the resource utilization of digestate.

Application of biochar and selenium together at low dose efficiently reduces mercury and methylmercury accumulation in rice grains

Irrespective of cost and ecological risk, literatures have reported that both biochar and selenium (Se) alone at high application rate exhibited positive effects on decreasing rice mercury (Hg) uptake in high Hg contaminated paddy soil. In this study, we investigated whether biochar and Se together at low dose could efficiently reduce the rice grain Hg and MeHg accumulation in the slight Hg-contaminated soil. Compared with control (CK), the Hg concentration of grains in the BC3, Se0.5, and BC3 + Se0.5 treatments decreased by 5.4 %, 38.3 %, and 48.5 %, respectively. Co-application of biochar and Se also decreased the methylmercury (MeHg) concentration in rice grains by 29.1-91.6 %. The decrease of Hg and MeHg level in rice grains for biochar and Se treatments could be attributed to the following mechanisms: (1) high Hg (primarily inorganic Hg) adsorption on biochar through its high hydroxyl groups and large specific surface area; (2) Increased dissolved organic carbon and cysteine contents in pore water after biochar application, which reduced the availability of soil Hg through complexation; (3) Decreased bioavailability of Hg in soil due to the formation of HgSe precipitation which inhibited Hg uptake and translation by rice plant; (4) Both biochar and Se facilitated the reduction of MeHg in soil. Our results indicate that co-application of biochar and Se at low dose is a promising method to effectively mitigate Hg accumulation in rice grains from the slight Hg-contaminated soil.

Facile Doping and Functionalization of Molybdic Acid into Nanobiochar to Enhance Mercury Ion Removal from Water Systems

Functionalized nanomaterials with surface-active groups have garnered significant research interest due to their wide-ranging applications, particularly in water treatment for removing various contaminants. This study focuses on developing a novel, multi-functional nanobiosorbent by synthesizing nanosized biochar from artichoke leaves (NBAL) and molybdic acid (MA). The resulting nanobiosorbent, MA@NBAL, is produced through a microwave-irradiation process, offering a promising material for enhanced environmental remediation. The characteristics of assembled MA@NBAL were evaluated from SEM-EDX, XPS, TGA, FT-IR, and zeta potential detection. The size of particles ranged from 18.7 to 23.7 nm. At the same time, the EDX analysis denoted the existence of several major elements with related percentage values of carbon (52.9%), oxygen (27.6%), molybdenum (8.8%), and nitrogen (4.5%) in the assembled MA@NBAL nanobiosorbent. The effectiveness of MA@NBAL in removing Hg(II) ions was monitored via the batch study method. The optimized maximum removal capacity of Hg(II) ions onto MA@NBAL was established at pH 6.0, 30.0 min equilibrium time, and 20 mg of nanobiosorbent, providing 1444.25 mg/g with a 10.0 mmol/L concentration of Hg(II). Kinetic studies revealed that the adsorption process followed a pseudo-second-order model, with R2 values ranging from 0.993 to 0.999 for the two tested Hg(II) concentrations, indicating excellent alignment with the experimental data. This suggests that the chemisorption mechanism involves cation exchange and complex formation. Isotherm model evaluation further confirmed the adsorption mechanism, with the Freundlich model providing the best fit, yielding an R2 of 0.962. This result indicates that Hg(II) adsorption onto the surface of MA@NBAL nanobiosorbent occurs on a heterogeneous surface with multilayer formation characteristics. The results of the temperature factor and computation of the thermodynamic parameters referred to endothermic behavior via a nonspontaneous process. Finally, the valid applicability of MA@NBAL nanobiosorbent in the adsorptive recovery of 2.0 and 5.0 µg/mL Hg(II) from contaminated real aquatic matrices was explored in this study, providing 91.2-98.6% removal efficiency.

Machine learning screening of biomass precursors to prepare biomass carbon for organic wastewater purification: A review

In the past decades, the amount of biomass waste has continuously increased in human living environments, and it has attracted more and more attention. Biomass is regarded as the most high-quality and cost-effective precursor material for the preparation carbon of adsorbents and catalysts. The application of biomass carbon has extensively explored. The efficient application of biomass carbon in organic wastewater purification were reviewed. With briefly introducing biomass types, the latest progress of Machine learning in guiding the preparation and application of biomass carbon was emphasized. The key factors in constructing efficient biomass carbon for adsorption and catalytic applications were discussed. Based on the functional groups, rich pore structure and active site of biomass carbon, it exhibits high efficiency in water purification performance in the fields of adsorption and catalysis. In addition, out of a firm belief in the enormous potential of biomass carbon, the remaining challenges and future research directions were discussed.

Preparation of porous lignocellulose biochar adsorbent by cold isostatic pressing pretreatment and study on Hg (II) adsorption properties of C and N dual activity sites

Utilizing corn straw (CS) mainly composed of lignocellulose to prepare physically modified biochar (PCSB) via cold isostatic pressing (CIP) in order to increase the biochar' s Hg (II) adsorption capacity. The results of the characterization indicated that CIP pretreatment renders PCSB-400' s structure more porous and higher N content of 16.65 %, leading to more N-containing functional groups partaking in the adsorption process. PCSB-400 adsorbed Hg (II) primarily via C/N synergistic complexation and electrostatic attraction between pores, in addition to the presence of redox reactions of surface functional groups on PCSB-400. The adsorption experiment reveals that PCSB-400 has a high selectivity for the adsorption of Hg (II). The adsorption process of Hg (II) by PCSB-400 more closely resembles the Langmuir model and pseudo-first-order adsorption kinetics equation. The adsorption quantity at saturation is 282.52 mg/g at 25 °C. This paper provided an effective idea to selectively remove Hg (II) in wastewater.

Fabrication of Monodisperse Magnetic Polystyrene Mesoporous Composite Microspheres for High-Efficiency Selective Adsorption and Rapid Separation of Cationic Dyes in Textile Industry Wastewater

Sustainable development has become an inevitable trend in the world's green chemical industry for a generation or more. In this study, a monodisperse magnetic polystyrene mesoporous composite microsphere (MPPS) composed of Fe3O4 nanoparticles loaded on polystyrene mesoporous microspheres is introduced. These microspheres serve as effective adsorbents for the swift removal of cationic dyes. The fabrication of the wastewater adsorbent, with its simple operation and economic practicality, involved a combination of dispersion polymerization, a sulfonation reaction, two-step swelling polymerization, and in situ alkaline oxidation technology. Notably, the adsorption capacity within 3 min reaches 184.0 mg/g, with an impressive adsorption efficiency of 92%. This is primarily attributed to the high specific surface area (Smax) of the MPPS providing more reaction sites for π-π interaction. Simultaneously, the attractive force between negatively charged sulfonic acid groups and cationic dyes is enhanced through surface modification of the MPPS. Furthermore, the MPPS, boasting a maximum saturation magnetization of 38.19 emu/g, ensures rapid separation from the solution for recycling within 3 s. Even after 5 cycles, the adsorption efficiency remains over 90%. The rapid separation of dyes is facilitated by the magnetic attraction of Fe3O4 nanoparticles from the MPPS under the application of a magnetic field. These composite mesoporous materials exhibit outstanding performance in both efficient selective adsorption and recyclability, presenting a novel green adsorbent with promising prospects for sustainable development. This innovation is poised to excel in fields such as sewage treatment, separation, and purification.

Applications of engineered biochar in remediation of heavy metal(loid)s pollution from wastewater: Current perspectives toward sustainable development goals

Environmental pollution of heavy metal(loid)s (HMs) caused adverse impacts, has become one of the emerging concerns and challenges worldwide. Metal(loid)s can pose significant threats to living organisms even when present in trace levels within environmental matrices. Extended exposure to these substances can lead to adverse health consequences in humans. Removing HM-contaminated water and moving toward sustainable development goals (SDGs) is critical. In this mission, biochar has recently gained attention in the environmental sector as a green and alternative material for wastewater removal. This work provides a comprehensive analysis of the remediation of typical HMs by biochars, associated with an understanding of remediation mechanisms, and gives practical solutions for ecologically sustainable. Applying engineered biochar in various fields, especially with nanoscale biochar-aided wastewater treatment approaches, can eliminate hazardous metal(loid) contaminants, highlighting an environmentally friendly and low-cost method. Surface modification of engineered biochar with nanomaterials is a potential strategy that positively influences its sorption capacity to remove contaminants. The research findings highlighted the biochars' ability to adsorb HM ions based on increased specific surface area (SSA), heightened porosity, and forming inner-sphere complexes with oxygen-rich groups. Utilizing biochar modification emerged as a viable approach for addressing lead (Pb), cadmium (Cd), arsenic (As), mercury (Hg), and chromium (Cr) pollution in aqueous environments. Most biochars investigated demonstrated a removal efficiency >90 % (Cd, As, Hg) and can reach an impressive 99 % (Pb and Cr). Furthermore, biochar and advanced engineered applications are also considered alternative solutions based on the circular economy.

An integrated electrode material based on corn straw cellulose biochar with three-dimensional network porous structure for boosting electrochemical performance of lithium batteries

In this work an integrated electrode material based on the VS4 nanoparticles grow on three-dimensional network porous biochar is put forward, forming a heterostructure that significantly boost the rate and cycle performance in lithium batteries. Biochar derives from two-steps treatment removing partial cellulose and hemicellulose, possessing three-dimensional network porous structure and naturally nitrogenous. The integrated electrode material constructs the continuous electrons transfer network, accommodates the volume expansion and traps the polar polysulfides efficiently. After 100 cycles at 1C, the integrated electrode with biochar shows the highest specific discharge capacity. Even at 2C, the three-dimensional electrode can display a high specific discharge capacity of 798.6 mAh·g-1. Thus, our study has pointed the innovations approach of constructing integrated electrode materials with porous structure biochar to enhance the electrochemical performance of lithium batteries.

A comprehensive review on the preparation of biochar from digestate sources and its application in environmental pollution remediation

The preparation of biochar from digestate is one of the effective ways to achieve the safe disposal and resource utilization of digestate. Nevertheless, up to now, a comprehensive review encompassing the factors influencing anaerobic digestate-derived biochar production and its applications is scarce in the literature. Therefore, to fill this gap, the present work first outlined the research hotspots of digestate in the last decade using bibliometric statistical analysis with the help of VOSviewer. Then, the characteristics of the different sources of digestate were summarized. Furthermore, the influencing factors of biochar preparation from digestate and the modification methods of digestate-derived biochar and associated mechanisms were analyzed. Notably, a comprehensive synthesis of anaerobic digestate-derived biochar applications is provided, encompassing enhanced anaerobic digestion, heavy metal remediation, aerobic composting, antibiotic/antibiotic resistance gene removal, and phosphorus recovery from digestate liquor. The economic and environmental impacts of digestate-derived biochar were also analyzed. Finally, the development prospect and challenges of using biochar from digestate to combat environmental pollution are foreseen. The aim is to not only address digestate management challenges at the source but also offer a novel path for the resourceful utilization of digestate.

Sulfur functionalized biocarbon sorbents for low-concentration mercury isolation

Sulfur functionalized biocarbons were prepared from naturally abundant lignin alkali with sodium thiocyanate as an activation agent and a sulfur source. The resultant biocarbon sorbents showed a high mercury isolation ability from aqueous solutions, where high surface area and doping of sulfur significantly aid the uptake of mercury, i.e., 0.05 g of biocarbon sorbent removed 99% of mercury from 250 mL of simulated wastewater with an initial concentration of mercury of 10 mg L-1.

When biochar is involved in rhizosphere dissipation and plant absorption of pesticides: A meta-analysis

Clarifying the influences of biochar input on the rhizosphere dissipation and plant absorption of pesticides is a crucial prerequisite for utilizing biochar in the restoration of pesticide-contaminated soils. Nevertheless, the application of biochar to pesticide-contaminated soils does not always achieve consistent results on the rhizosphere dissipation and plant absorption of pesticides. Under the new situation of vigorously promoting the application of biochar in soil management and carbon sequestration, a timely review is needed to further understand the key factors affecting biochar remediation of pesticide-contaminated soil. In this study, a meta-analysis was conducted utilizing variables from three dimensions of biochar, remediation treatment, and pesticide/plant type. The pesticide residues in soil and the pesticide uptake by plant were used as response variables. Biochar with high adsorption capacity can impede the dissipation of pesticides in soil and mitigate their absorption by plants. The specific surface area of biochar and the type of pesticide are critical factors that affect pesticide residues in soil and plant uptake, respectively. Applying biochar with high adsorption capacity, based on specific dosages and soil characteristics, is recommended for the remediation of continuously cultivated soil contaminated with pesticides. This article aims to provide a valuable reference and understanding for the application of biochar-based soil remediation technology and the treatment of pesticide pollution in soil.

Emerging applications of biochar: A review on techno-environmental-economic aspects

Biomass fast pyrolysis produces bio-oil and biochar achieving circular economy. This review explored the emerging applications of biochar. Biochar possesses the unique properties for removing emerging contaminants and for mine remediation, owing to its negative charge surface, high specific surface area, large pore size distribution and surface functional groups. Additionally, biochar could adsorb impurities such as CO2, moisture, and H2S to upgrade the biogas. Customizing pyrolysis treatments, optimizing the feedstock and pyrolysis operating conditions enhance biochar production and improve its surface properties for the emerging applications. Life cycle assessment and techno-economic assessment indicated the benefits of replacing conventional activated carbon with biochar.

Effects of cold isostatic press pretreatment of rice straw on microstructure and efficiency of anaerobic digestion for methane production

In this study, rice straw was pretreated using by cold isostatic pressure to disrupt its microstructure and improve the performance of anaerobic digestion, and the optimal process parameters were optimized using the response surface methodology. The results showed that cold isostatic pressure pretreatment under optimal conditions (pressure of 400 MPa and holding time of 9 min) was effective in disrupting the structure of rice straw and improving its biodegradability. The cumulative methane production of the cold isostatic pressure pretreatment group increased by 76% compared to the untreated group. In addition, microbial community analysis showed that the relative abundance of Firmicutes, Halobacterota, DMER64 and Methanosaeta was higher in groups pretreated with cold isostatic pressure than in untreated groups. This study demonstrated the potential of pretreatment of rice straw with cold isostatic pressure to increase methane production during anaerobic digestion.

Efficient removal of phytochrome using rice straw-derived biochar: Adsorption performance, mechanisms, and practical applications

Rice straw derived biochar was fabricated and applied as a purification agent. The adsorption kinetics, isotherms, and thermodynamics for adsorbates were determined using the biochar. Adsorption kinetics and isotherms were best fitted by the pseudo-second order and Langmuir models. Biochar could effectively remove chlorophyll in 9 different solutions. Biochar was employed as a clean-up reagent for 149 pesticides detection, which revealed that biochar had a higher phytochrome removal capacity than graphitized carbon black and 123 pesticides had satisfactory recovery values. The biochar was prepared into a sample pad by electrospinning and was then used for online sample clean-up in a test strip, and it showed high ability of removing phytochrome and improving detection sensitivity. Thus, biochar could be applied as a purification agent to remove pigmentation, making it a promising candidate not only for sample pretreatment but also in the fields of food, agriculture and environment.

Recent advances in nanomaterials based sustainable approaches for mitigation of emerging organic pollutants

Emerging organic pollutants (EOPs) are a category of pollutants that are relatively new to the environment and recently garnered a lot of attention. The majority of EOPs includes endocrine-disrupting chemicals (EDCs), antibiotic resistance genes (ARGs), pesticides, dyes and pharmaceutical and personal care products (PPCPs). Exposure to contaminated water has been linked to an increase in incidences of malnutrition, intrauterine growth retardation, respiratory illnesses, liver malfunctions, eye and skin diseases, and fatalities. Consequently, there is a critical need for wastewater remediation technologies which are effective, reliable, and economical. Conventional wastewater treatment methods have several shortcomings that can be addressed with the help of nanotechnology. Unique characteristics of nanomaterials (NMs) make them intriguing and efficient alternative in wastewater treatment strategies. This review emphasis on the occurrence of divers emerging organic pollutants (EOPs) in water and their effective elimination via different NMs based methods with in-depth mechanisms. Furthermore, it also delves the toxicity assessment of NMs and critical challenges, which are crucial steps for practical implementations.

Effect of water-washing pretreatment on the enhancement of tetracycline adsorption by biogas residue biochar

Biochar preparation was a feasible strategy for realizing the reduction, harmlessness, and resource utilization of biogas residue (BR) simultaneously. How to enhance the adsorption performance of biogas residue biochar through simple, friendly, and effective way still needs to be investigated. In this study, water-washing pretreatment of BR was adopted before biochar preparation (BRBC-W), and pristine biochar (BRBC) was also produced to serve as control. The adsorption behavior and possible adsorption mechanisms of tetracycline (TC) onto biochars were comprehensively studied. The results showed that water-washing pretreatment could increase the surface area and mesoporous volume of biochar from 358.63 to 391.98 cm³∙g^-1, and 0.459 to 0.488 cm³∙g^-1, respectively. More graphitic structure was observed in BRBC-W. In addition, the surface morphology, element content, minerals composition, and surface functional groups also changed in biochar after water-washing pretreatment. The pseudo-second-order and Redlich-Peterson models better descried the adsorption behavior of TC on BCRBC-W. The maximum adsorption capacity of BRBC and BRBC-W for TC based on Langmuir isotherm was 224.93 and 306.94 mg·g^-1, respectively. The adsorption affinity of BRBC-W toward TC was greater than that of BRBC. BRBC and BRBC-W can effectively remove TC in water within a wide pH range and under the interference of co-existing ions. The adsorption mechanism of TC onto BRBC and BRBC-W included ore filling, π-π interaction, and hydrogen bonding. The enhancement of TC on BRBC-W by water-washing pretreatment was attributable to the strengthening of pore diffusion and π-π interaction. Therefore, water-washing pretreatment effectively enhanced the adsorption performance of BRB, and BRBC-W was an effective eco-friendly adsorbent for the removal of TC from aquatic environment.

Mercury sources, contaminations, mercury cycle, detection and treatment techniques: A review

Mercury is considered a toxic pollutant harmful to our human health and the environment. Mercury is highly persistent, volatile and bioaccumulated and enters into the food chain, destroying our ecosystem. The levels of mercury in the water bodies as well as in the atmosphere are affected by anthropogenic and natural activities. In this review, the mercury species as well as the mercury contamination towards water, soil and air are discussed in detail. In addition to that, the sources of mercury and the mercury cycle in the aquatic system are also discussed. The determination of mercury with various methods such as with modified electrodes and nanomaterials was elaborated in brief. The treatment in the removal of mercury such as adsorption, electrooxidation and photocatalysis were explained with recent ideologies and among them, adsorption was considered one of the efficient techniques in terms of cost and mercury removal.