Ammonia/ammonium removal/recovery from wastewaters using bioelectrochemical systems (BES): A review

Performance of a pilot-scale microbial electrolysis cell coupled with biofilm-based reactor for household wastewater treatment: simultaneous pollutant removal and hydrogen production

The septic tank is the most commonly used decentralized wastewater treatment systems for household wastewater treatment in on-site applications. The removal rate of various pollutants is lower in different septic tank configurations. The integration of a microbial electrolysis cells (MEC) into septic tank or biofilm-based reactors can be a green and sustainable technology for household wastewater treatment and energy production. In this study, a 50-L septic tank was converted into a 50-L MEC coupled with biofilm-based reactor for simultaneous household wastewater treatment and hydrogen production. The biofilm-based reactor was integrated by an anaerobic packed-bed biofilm reactor (APBBR) and an aerobic moving bed biofilm reactor (aeMBBR). The MEC/APBBR/aeMBBR was evaluated at different organic loading rates (OLRs) by applying voltage of 0.7 and 1.0 V. Result showed that the increase of OLRs from 0.2 to 0.44 kg COD/m3 d did not affect organic matter removals. Nutrient and solids removal decreased with increasing OLR up to 0.44 kg COD/m3 d. Global removal of chemical oxygen demand (COD), biochemical oxygen demand (BOD), total nitrogen (TN), ammoniacal nitrogen (NH4+), total phosphorus (TP) and total suspended solids (TSS) removal ranged from 81 to 84%, 84 to 85%, 53 to 68%, 88 to 98%, 11 to 30% and 76 to 88% respectively, was obtained in this study. The current density generated in the MEC from 0 to 0.41 A/m2 contributed to an increase in hydrogen production and pollutants removal. The maximum volumetric hydrogen production rate obtained in the MEC was 0.007 L/L.d (0.072 L/d). The integration of the MEC into biofilm-based reactors applying a voltage of 1.0 V generated different bioelectrochemical nitrogen and phosphorus transformations within the MEC, allowing a simultaneous denitrification-nitrification process with phosphorus removal.

Continuous high-purity bioelectrochemical nitrogen recovery from high N-loaded wastewaters

Microbial electrolysis cells (MEC) have been identified as an energy efficient system for ammonium recovery from wastewater. However, high ammonium concentrations at the anode can have inhibitory effects. This work aims to determine the effects on current generation performance and active ammonia nitrogen recovery in wastewater containing 0.5 to 2.5 g N-NH4+/L. The study also evaluates the effect of two cathode materials, stainless steel (SS-MEC) and nickel foam (NF-MEC). When the concentration of ammonium in the feed was increased from 0.5 to 1.5 g N-NH4+/L the maximum current density increased from 3.2 to 3.9 A/m2, but a further increase to 2.5 g N-NH4+/L inhibited the biofilm activity, decreasing the current density to 0.5 A/m2. The maximum ammonium removal and recovery efficiencies were 71 % and 33 % at 0.5 g N-NH4+/L. The SS-MEC exhibited more energy efficient ammonium recovery compared to the NF-MEC, requiring 3.6 kWh/kgN,recovered at 0.5 gN-NH4+/L. The highest ammonium recovery rate of 33 gN/m2/d (1.5 gN-NH4+/L) was obtained with an energy consumption of 4.5 kWh/kgN,recovered. Conversely, a lower recovery rate (10 gN/m2/d for 2.5 gN-NH4+/L) resulted in reduced energy consumption at 2.1 kWh/kgN,recovered. This highlights the inherent trade-off between energy consumption and efficient ammonium recovery in the process.

Novel self-stratifying bioelectrochemical system for municipal wastewater treatment halves nitrous oxide emissions

Reducing carbon footprint and greenhouse gas emissions are prime global goals. Wastewater treatment contributes significantly, and this study developed a technology with a focus on utilisation in small-decentralised plants. Bioelectrochemical systems (BES) utilise bacteria to remove pollutants while generating power and a range of experiments were performed to investigate their suitability compared to conventional trickling filters. A lab-based trickling filter was inferior to one adapted with electrodes both in terms of organic matter (COD) and phosphate reduction, but the BES did not generate electrical output due to inferior cathode configuration. An enhanced, novel, dual-BES system was developed with improved cathode positioning and operated as a cascade. This demonstrated improved COD (79 %) and total nitrogen (102 %) removal over the trickling filter. Concomitantly it emitted 47 % less N2O and generated an electrical output of 0.62 mA at 311 mV. Further work is needed to optimise BES but these results are encouraging in the development of sustainable biotechnologies.

Anodic ammonium oxidation in microbial electrolysis cell: Towards nitrogen removal in low C/N environment

Biological nitrogen removal in low C/N environment is challenging in wastewater treatment for a long time. Autotrophic ammonium oxidation is promising due to the no need of carbon source addition, but alternative electron acceptors other than oxygen has to be widely investigated. Recently, microbial electrolysis cell (MEC), which applies a polarized inert electrode as the electron harvester, has been proved effective to oxidize ammonium with electroactive biofilm. That is, anodic microbes stimulated by exogenous low power can extract electron from ammonium and transfer electron to electrodes. This review aims to consolidate the recent advances in anodic ammonium oxidation in MEC. Various technologies based on different functional microbes and mechanisms of these processes are reviewed. Thereafter, the crucial factors influencing the ammonium oxidation technology are discussed. Challenges and prospects of anodic ammonium oxidation in ammonium-containing wastewater treatment are also proposed to provide valuable insights on the technologic reference and potential value of MEC in ammonium-containing wastewater treatment.

Detection and removal technologies for ammonium and antibiotics in agricultural wastewater: Recent advances and prospective

With the extensive development of industrial livestock and poultry production, a considerable part of agricultural wastewater containing tremendous ammonium and antibiotics have been indiscriminately released into the aquatic systems, causing serious harms to ecosystem and human health. In this review, ammonium detection technologies, including spectroscopy and fluorescence methods, and sensors were systematically summarized. Antibiotics analysis methodologies were critically reviewed, including chromatographic methods coupled with mass spectrometry, electrochemical sensors, fluorescence sensors, and biosensors. Current progress in remediation methods for ammonium removal were discussed and analyzed, including chemical precipitation, breakpoint chlorination, air stripping, reverse osmosis, adsorption, advanced oxidation processes (AOPs), and biological methods. Antibiotics removal approaches were comprehensively reviewed, including physical, AOPs, and biological processes. Furthermore, the simultaneous removal strategies for ammonium and antibiotics were reviewed and discussed, including physical adsorption processes, AOPs, biological processes. Finally, research gaps and the future perspectives were discussed. Through conducting comprehensive review, future research priorities include: (1) to improve the stabilities and adaptabilities of detection and analysis techniques for ammonium and antibiotics, (2) to develop innovative, efficient, and low cost approaches for simultaneous removal of ammonium and antibiotics, and (3) to explore the underlying mechanisms that governs the simultaneous removal of ammonium and antibiotics. This review could facilitate the evolution of innovative and efficient technologies for ammonium and antibiotics treatment in agricultural wastewater.