Water reuse from wastewater treatment: The transition towards circular economy in the water sector

The effect of aeration mode (intermittent vs. continuous) on nutrient removal and greenhouse gas emissions in the wastewater treatment plant of Corleone (Italy)

The paper reports the results of an experimental study aimed at comparing two configurations of a full-scale wastewater treatment plant (WWTP): conventional activated sludge (CAS) and oxic-settling-anaerobic process (OSA) with intermittent aeration (IA). A comprehensive monitoring campaign was carried out to assess multiple parameters for comparing the two configurations: carbon and nutrient removal, greenhouse gas emissions, respirometric analysis, and sludge production. A holistic approach has been adopted in the study with the novelty of including the carbon footprint (CF) contribution (as direct, indirect and derivative emissions) in comparing the two configurations. Results showed that the OSA-IA configuration performed better in total chemical oxygen demand (TCOD) and ortho-phosphate (PO4-P) removal. CAS performed better for Total Suspended Solids (TSS) removal showing a worsening of settling properties for OSA-IA. The heterotrophic yield coefficient and maximum growth rate decreased, suggesting a shift to sludge reduction metabolism in the OSA-IA configuration. Autotrophic biomass showed a reduced yield coefficient and maximum growth yield due to the negative effects of the sludge holding tank in the OSA-IA configuration on nitrification. The OSA-IA configuration had higher indirect emissions (30.5 % vs 21.3 % in CAS) from additional energy consumption due to additional mixers and sludge recirculation pumps. The CF value was lower for OSA-IA than for CAS configuration (0.36 kgCO2/m3 vs 0.39 kgCO2/m3 in CAS).

The potential for water recovery from urban waste water - The perspective of urban waste water treatment plant operators in Poland

Water recovery from waste water has become an essential element of the circular economy in the Baltic Sea region. However, there is little data on the possibility of using water recovered from urban waste water. A survey was conducted to learn the opinions of Poland waste water treatment plant operators. They were asked whether they recovered water for internal or external needs. Respondents indicated opportunities and barriers in this activity. The opinions of 107 operators show that work is underway on closing internal circuits in urban WWTPs. These solutions are technically relatively easy to implement and show measurable benefits (i.e., saving drinking water). However, water recovery for external purposes is rare and is at a very early stage. Despite this, the potential is significant, although many financial, organizational, technical, and mental barriers exist. The most critical challenge is the safe use of reclaimed water and the cost-effectiveness of the solutions. The survey also shows a need for education and involvement of the public.

Insights of phytoremediation mechanisms for viruses based on in-vitro, in-vivo and in-silico assessments of selected herbal plants

Waterborne pathogenic viruses present unrelenting challenges to the global health and wastewater treatment industry. Phytoremediation offers promising solutions for wastewater treatment through plant-based technologies. This study investigated antiviral mechanisms in-vivo using bacteriophages MS2 and T4 as surrogates for effective herbs screened in-vitro from three embryophytes (Ocimum basilicum, Mentha sp., Plectranthus amboinicus), two macrophytes (Eichhornia crassipes, Pistia stratiotes) and a perennial grass (Cyperus rotundas). In-silico virtual screening predicted antiviral phytochemicals for further antiviral potency assessment. Results suggested in-vitro antiviral activities of embryophytes and macrophytes were higher (43-62%) than grass (21-26%). O. basilicum (OB, 57-62%) and P. stratiotes (PS, 59-60%) exhibited the highest antiviral activities. In-vivo tests showed notable virus reduction (>60%) in culture solution, attributed to rhizofiltration (66-74%) and phytoinactivation/phytodegradation (63-84%). In-silico analysis identified rutin as a primary antiviral phytochemical for MS2 (-9.7 kcal/mol) and T4 (-10.9 kcal/mol), correlating with dose-response inactivation (∼58-62%). In-vivo tests suggested additional phytocompounds may contribute to viral inactivation, presenting new opportunities for herb-based wastewater treatment solutions. Consequently, this study not only demonstrates the antiviral capabilities of OB and PS but also introduces an innovative approach for addressing viral contaminants in water.

Reducing biosolids from a membrane bioreactor system: Assessing the effects on carbon and nutrient removal, membrane fouling and greenhouse gas emissions

This study presents the effects on carbon and nutrient removal, membrane fouling and greenhouse gas (GHG) emissions of an Oxic-Settling-Anaerobic (OSA) - Membrane Bioreactor (MBR) pilot plant fed with real wastewater. The influence of three sludge return internal ratios (IR) was investigated by testing 45, 75 and 100%. The results showed that with the increase of IR, the biological sludge production substantially decreased by 85.8% due to the combination of cell lysis and endogenous metabolism. However, a worsening of ammonia removal efficiencies occurred (from 94.5 % to 84.7 with an IR value of 45 and 100%, respectively) mostly due to the ammonia release caused by cell lysis under anaerobic conditions. The N2O emission factor increased with the rise of IR (namely, from 2.17% to 2.54% of the total influent nitrogen). In addition, a variation of carbon footprint (CF) (0.78, 0.62 and 0.75 kgCO2eq m-3 with 45, 75 and 100% IR, respectively) occurred with IR mainly due to the different energy consumption and carbon oxidation during the three periods. The study's relevance is to address the optimal operating conditions in view of reducing sludge production. In this light, the need to identify a trade-off between the advantages of reducing sludge production and the disadvantages of increasing membrane fouling and GHG emissions must be identified in the future.

Envisioning the innovative approaches to achieve circular economy in the water and wastewater sector

Given the challenges of urbanization and rapid resource depletion, policymakers have been compelled to abandon the old sequential paradigm of "take-make-use-dispose" to a circular approach that prioritizes preservation of natural resources. The circular economy represents a sustainable management concept that focuses on reducing, recovering, reusing, and recycling waste. While significant strides have been made in implementing circular economy principles in various industries such as automotive, electronics, and construction, particular attention has been given to the water and wastewater domains due to imbalances in water resources. Here we review the global progress of circular economy adoptability in the water and wastewater domains, considering technical, environmental, economic, and social perspectives. It assesses the current state of circular economy integration in the wastewater domain worldwide and presents approaches to promote and accelerate its adoption. The study critically examines the principles of waste management, known as the 6Rs (reclaim, restore, recycle, reduce, recover, reuse), in order to formulate effective strategies for integrating circular economy practices in the water and wastewater domains. Additionally, the study provides an overview of existing research conducted on different aspects of circular economy. Finally, the study analyzes the challenges and opportunities associated with implementing circular economy principles in the water sector.

Mitigating risks and maximizing sustainability of treated wastewater reuse for irrigation

Scarcity of freshwater for agriculture has led to increased utilization of treated wastewater (TWW), establishing it as a significant and reliable source of irrigation water. However, years of research indicate that if not managed adequately, TWW may deleteriously affect soil functioning and plant productivity, and pose a hazard to human and environmental health. This review leverages the experience of researchers, stakeholders, and policymakers from Israel, the United-States, and Europe to present a holistic, multidisciplinary perspective on maximizing the benefits from municipal TWW use for irrigation. We specifically draw on the extensive knowledge gained in Israel, a world leader in agricultural TWW implementation. The first two sections of the work set the foundation for understanding current challenges involved with the use of TWW, detailing known and emerging agronomic and environmental issues (such as salinity and phytotoxicity) and public health risks (such as contaminants of emerging concern and pathogens). The work then presents solutions to address these challenges, including technological and agronomic management-based solutions as well as source control policies. The concluding section presents suggestions for the path forward, emphasizing the importance of improving links between research and policy, and better outreach to the public and agricultural practitioners. We use this platform as a call for action, to form a global harmonized data system that will centralize scientific findings on agronomic, environmental and public health effects of TWW irrigation. Insights from such global collaboration will help to mitigate risks, and facilitate more sustainable use of TWW for food production in the future.

Current challenges and future perspectives for the full circular economy of water in European countries

This paper reviews the current problems and prospects to overcome circular water economy management challenges in European countries. The geopolitical paradigm of water, the water economy, water innovation, water management and regulation in Europe, environmental and safety concerns at water reuse, and technological solutions for water recovery are all covered in this review, which has been prepared in the frame of the COST ACTION (CA, 20133) FULLRECO4US, Working Group (WG) 4. With a Circular Economy approach to water recycling and recovery based on this COST Action, this review paper aims to develop novel, futuristic solutions to overcome the difficulties that the European Union (EU) is currently facing. The detailed review of the current environmental barriers and upcoming difficulties for water reuse in Europe with a Circular Economy vision is another distinctive aspect of this study. It is observed that the biggest challenge in using and recycling water from wastewater treatment plants is dealing with technical, social, political, and economic issues. For instance, geographical differences significantly affect technological problems, and it is effective in terms of social acceptance of the reuse of treated water. Local governmental organizations should support and encourage initiatives to expand water reuse, particularly for agricultural and industrial uses across all of Europe. It should not also be disregarded that the latest hydro politics approach to water management will actively contribute to addressing the issues associated with water scarcity.

Trading-off greenhouse gas emissions and 741/2020 European Union water reuse legislation: An experimental MBR study

A trade-off between greenhouse emissions (direct and indirect) and operational costs in the water treatment sector is of great importance, although only few literature studies exist. The paper presents a comprehensive experimental study on a Membrane Bioreactor (MBR) pilot plant at the Water Resource Recovery Facility of Palermo University (Italy). The MBR pilot plant was aimed at reducing carbon footprint while producing water suitable for water reuse in agriculture. Multiple scenarios were assessed to unveil the best operational variables including the assessment of the reclaimed water quality index for water reuse. Results showed the lowest operational costs for the MBR of 5.05 € cent/m3 with Class B according to 741/2020 European legislation. Results revealed optimised values, in terms of airflow rate and backwash frequency, of 0.8 m3/m2/h and 12 times/h, respectively. The highest N2O emission was measured in correspondence of scenario S5 (airflow rate of 1.6 m3/m2/h) with 0.40 mg N2O-N/m2/h in agreement with previous literature studies. The obtained results could effectively address the operators to find a trade-off between operational costs and water quality.

Centralization of wastewater treatment in a tourist area: A comparative LCA considering the impact of seasonal changes

Nowadays, environmental protection has become a topic of primary importance, and the interest in wastewater treatment plants (WWTPs) has increased due to the need for a paradigm shift from linear to circular economy. The centralization level of wastewater infrastructure is the basis for a successful system. The aim of this study was to investigate the environmental impacts generated from the centralized treatment of wastewater in a tourist area in central Italy. The combined use of BioWin 6.2 simulation software and life cycle assessment (LCA) methodology was implemented to evaluate the potential connection of a small decentralized WWTP to a medium-size centralized facility. Two different scenarios (decentralized system, corresponding to the current situation, and centralized) were evaluated in two separate periods: high season (HS), corresponding to the main tourist season, and low season (LS), which is the period before the main tourist season. Two sensitivity analyses were conducted, assuming different N2O emission factors, and considering the period at the end of tourist season, respectively. Although with modest advantages (up to -6 % in pollutant emissions), WWTP connection was the best management option in 10 out of 11 indicators in HS, and 6 out of 11 categories in LS. The study showed that wastewater centralization was promoted by scale factors in HS, as the most impactful consumptions decreased as the degree of centralization increased; on the other hand, the decentralized system was less penalized in LS, as small WWTP was less stressed and energy consuming in this period. Sensitivity analysis confirmed the results obtained. Site-specific conditions can lead to conflicting circumstances, as key parameters may have different behaviors depending on seasonal variations, and the degree of centralization in tourist areas should be addressed by distinguishing separate periods, based on changes in tourist flows and pollution loads.

Reclamation of real textile wastewater by sequential advanced oxidation and adsorption processes using corn-cob based materials

Wastewater management has become crucial for sustaining biological life in the near future. One of the key aspects is integration of treatment processes aiming reuse of treated water for many purposes instead of water discharge. This study focused on combining two different methods, photo-Fenton-like oxidation, and adsorption, for treatment of real textile wastewater to improve water quality to be reused for irrigation. The real textile wastewater was collected from a local plant and subjected to photo-Fenton-like oxidation and adsorption as hybrid process. The operational parameters were optimized for each step by assessing the water quality according to the domestic regulations for irrigation water. The photo-Fenton-like oxidation itself was not successful to achieve the targeted water quality for reuse whereas adsorption as an additional step made the treated water reusable in terms of organic content. But the treated water still contained a certain amount of salinity due to extreme salt usage in textile processing. It was concluded that the treated water at the end of hybrid process could be used for salinity resistant plants such as sugar beet, barley, and cotton which demonstrates a promising contribution to the circular economy for biomass.

Path toward Sustainability in Wastewater Management in Brazil

Developing countries have not carried out the adequate management of wastewater and are a long way off meeting the sustainability goal of universal access to safely managed sanitation services by 2030. This article discusses sustainability in wastewater management and conducts a narrative literature review to analyze four stages on the path toward sustainability: (1) the prevention of or reduction in pollution at the source; (2) wastewater collection and treatment; (3) using wastewater as an alternative source of water; and (4) the recovery of useful by-products. It also provides an overview of wastewater management in Brazil and shows the advantages of using wastewater to produce biofuel in a country in which 48.3% of energy production comes from renewable sources.

Influence of the Deposition Parameters on the Properties of TiO2 Thin Films on Spherical Substrates

Wastewater treatment targeting reuse may limit water scarcity. Photocatalysis is an advanced oxidation process that may be employed in the removal of traces of organic pollutants, where the material choice is important. Titanium dioxide (TiO₂) is a highly efficient photocatalyst with good aqueous stability. TiO₂ powder has a high surface area, thus allowing good pollutant adsorption, but it is difficult to filter for reuse. Thin films have a significantly lower surface area but are easier to regenerate and reuse. In this paper, we report on obtaining sol-gel TiO₂ thin films on spherical beads (2 mm diameter) with high surface area and easy recovery from wastewater. The complex influence of the substrate morphology (etched up to 48 h in concentrated H₂SO₄), of the sol dilution with ethanol (1:0 or 1:1), and the number of layers (1 or 2) on the structure, morphology, chemical composition, and photocatalytic performance of the TiO₂ thin films is investigated. Etching the substrate for 2 h in H₂SO₄ leads to uniform, smooth surfaces on which crystalline, homogeneous TiO₂ thin films are grown. Films deposited using an undiluted sol are stable in water, with some surface reorganization of the TiO₂ aggregates occurring, while the films obtained using diluted sol are partially washed out. By increasing the film thickness through the deposition of a second layer, the roughness increases (from ~50 nm to ~100 nm), but this increase is not high enough to promote higher adsorption or overall photocatalytic efficiency in methylene blue photodegradation (both about 40% after 8 h of UV-Vis irradiation at 55 W/m²). The most promising thin film, deposited on spherical bead substrates (etched for 2 h in H₂SO₄) using the undiluted sol, with one layer, is highly crystalline, uniform, water-stable, and proves to have good photocatalytic activity.

Membrane-based water and wastewater treatment technologies: Issues, current trends, challenges, and role in achieving sustainable development goals, and circular economy

Membrane-based technologies are recently being considered as effective methods for conventional water and wastewater remediation processes to achieve the increasing demands for clean water and minimize the negative environmental effects. Although there are numerous merits of such technologies, some major challenges like high capital and operating costs . This study first focuses on reporting the current membrane-based technologies, i.e., nanofiltration, ultrafiltration, microfiltration, and forward- and reverse-osmosis membranes. The second part of this study deeply discusses the contributions of membrane-based technologies in achieving the sustainable development goals (SDGs) stated by the United Nations (UNs) in 2015 followed by their role in the circular economy. In brief, the membrane based processes directly impact 15 out of 17 SDGs which are SDG1, 2, 3, 5, 6, 7, 8, 9, 11, 12, 13, 14, 15, 16 and 17. However, the merits, challenges, efficiencies, operating conditions, and applications are considered as the basis for evaluating such technologies in sustainable development, circular economy, and future development.