Manganese ferrite modified agricultural waste-derived biochars for copper ions adsorption

Na/N Co-doped Seaweed Biochar Composite for Efficient Removal of Aqueous Pb(II) and Cu(II)

Pollution from harmful heavy metal ions such as Pb(II) and Cu(II) is causing serious environmental and health problems. In this study, Sodium and nitrogen co-doped porous carbon material (Na/NABc) was successfully prepared from seaweed, sodium hydroxide, and dicyandiamide. The experimental results showed that Na/NABc is an excellent adsorbent for the effective removal of Pb(II) and Cu(II) from water bodies. Specifically, 99.8% of Pb(II) and 64.6% Cu(II) (100 mg/L) were removed within 12 h using 10 mg Na/NABc(10%) at 25 °C. The adsorption of Pb(II) and Cu(II) in aqueous solution by Na/NABc(10%) was efficient and rapid in the first stage. The theoretical maximum removal capacities of Na/NABc for Pb(II) and Cu(II) were 959.6 and 299.1 mg/g, respectively. Pb(II) and Cu(II) ions were adsorbed quickly in the first 60 min, and the kinetics data were generally consistent with a pseudo-second-order model. Na/NABc(10%) had a large distribution coefficient for Pb(II) (8.38 L/mg) and Cu(II) (1.17 L/mg). The possible mechanisms were precipitation, Ion exchange, and surface complexation. The removal rate can reach about 70% after five cycles, and the release of sodium meets the standard. The results of this study demonstrate the potential applicability of Na/NABc(10%) for adsorption of heavy metals from aqueous solution.

An efficient and simple approach to remove Cd(II) in aqueous solution by using rice straw biochar: performance and mechanisms

In recent years, cadmium pollution in water environment has become an environmental problem that could not be ignored. As a porous carbon rich solid material, biochar is an environment-friendly new material because of its ultra-high adsorption capacity and strong chemical stability. In this study, rice straw biochar (RS-Biochar) was successfully prepared at different temperatures for removal of Cd(II) from aqueous solution. Through a series of characterization and adsorption experiments, the adsorption principle of Cd(II) by RS-Biochar was deeply studied. The results showed that RS-Biochar prepared at 600 °C (BioC600) has high specific surface area (232.6 m2/g) and shows high Cd(II) removal rate of 91.23% with the maximum Cd(II) adsorption capacity of 8.62 mg/g. The Langmuir model fit well to describe the adsorption process of Cd(II) on the BioC600. The mechanism analysis showed that hydroxyl and carboxyl groups on the biochar surface were concerned in the removal of Cd(II). The formation of CdCO3 in the adsorption process was also be proven. Importantly, RS-Biochar could be conveniently produced with needed scale, displaying a promising approach for remediating Cd(II)-contaminated water environment and a huge application potential.

Novel modified semi-carbonized fiber prepared using discarded clothes for derisking Cu(II) and Pb(II) contaminated water

We report a novel modified semi-carbonized fiber (CF) prepared using cotton and acrylic clothes for derisking contaminated water to realize the resource utilization of discarded clothes in wastewater treatment. In this study, amphoteric and auxiliary modifiers were used to modify CFs for preparing amphoteric and amphoteric-auxiliary CFs. The basic physicochemical properties of different modified CFs were determined, and the microscopic morphology of modified CFs was detected. The isothermal adsorption characteristics of Cu(II) and Pb(II) on different modified CFs were investigated by the batch method, and the effect mechanisms of temperature, pH, ionic strength, and material dose were compared. Physicochemical properties and microscopic morphology results proved that amphoteric and auxiliary modifiers were modified on the CF surface and changed the surface properties of CF. The adsorption capacities of Cu(II) and Pb(II) on modified CFs increased with the increase in equilibrium concentration of Cu(II) and Pb(II), and the isotherm was more suitable for Freundlich model fitting than that of the Langmuir model. The maximum adsorption capacities (qm) of Cu(II) and Pb(II) on different modified CFs were 60.72-81.26 mg/g and 102.58-161.72 mg/g, respectively, and presented the trend of amphoteric-auxiliary CFs > amphoteric CFs > CFs. Increasing pH and temperature and decreasing ionic strength and material dose were beneficial to Cu(II) and Pb(II) adsorption. The Cu(II) and Pb(II) adsorption process was a spontaneous, endothermic, and entropy-increasing reaction, and the adsorption rate was controlled by chemisorption. The adsorption amount of amphoteric-auxiliary CFs maintained about 65% of original materials after 3 times of regeneration. Electrostatic attraction, precipitation, complexation, and ion exchange were the main adsorption mechanisms. The cation exchange capacity and total pore volume of modified CFs were key to determining qm of Cu(II) and Pb(II).

Efficient and effective immobilization of tetracycline and copper from wastewater by zero-valent iron fabricated hydrochar derived from walnut peel

Antibiotics and heavy metals often coexist as non-point-source contaminants in wastewater and their quite contrary physiochemical properties make their co-removal processes challenging. In this work, a bifunctional zero-valent iron-modified hydrochar derived from walnut peel (MWPHC) was synthesized, which was then applied for the simultaneous removal of tetracycline (TC) and Cu(II) from wastewater. Based on the characterizations, Fe0 species were successfully distributed on the surface of the walnut peel substrates. The TC and Cu(II) could be synergistically immobilized, and bridging effects were observed between them, and MWPHC exhibited excellent ability on the simultaneous removal of TC (qmax = 433.59 mg/g) and Cu(II) (qmax = 586.25 mg/g). Furthermore, the engineering feasibility of the MWPHC was evaluated using column and regeneration experiments. These results shed light on the tailored MWPHC as an environmental functional material for pollution control of co-existing antibiotic and heavy metal contaminants in agro-industrial wastewater.

Preparation of sulfur self-doped coal-based adsorbent and its adsorption performance for Cu2

The limited application of high-sulfur coal (HSC) and the increasing severity of copper pollution in solution are two pressing issues. To alleviate such issues, a sulfur self-doped coal-based adsorbent (HSC@ZnCl2) was obtained by pyrolysis (850 °C, 60 min holding time) of HSC and ZnCl2 with a mass ratio of 1:0.5. The results adsorption experiment revealed that the endothermic and spontaneous adsorption process was consistent with the Sips isothermal model (R2 = 0.992) and pseudo-second-order kinetic (R2 = 0.994), and that the adsorption process with a maximum adsorption capacity of 11.97 mg/g. Meanwhile, the adsorption of Cu2+ onto HSC@ZnCl2 was a result of the synergistic effects of various interactions, such as the complexation by oxygen-containing functional groups, electrostatic attraction and surface precipitation by ZnS on the adsorbent surface, and the process also included redox reaction. The findings of this work indicate that the preparation of sulfur self-doped coal-based adsorbent prepared from high-sulfur coal is a promising method for its large-scale utilization.

Nitrogen-rich magnetic biochar prepared by urea was used as an efficient catalyst to activate persulfate to degrade organic pollutants

In order to fully exploit the potential of magnetic biochar-based persulfate (PS) systems, N was utilized to modify the magnetic biochar-based catalysts through impregnation-pyrolysis method. A typical antifungal drug, metronidazole (MNZ), is selected as the target pollutant to score the reactivity of as-synthetic nitrogen-rich magnetic biochar (NMBC) catalysts. In the modified system, 99.6% of MNZ was removed, 13.6 times of that in the unmodified system. Active radical verification experiments showed that 1O2 was the key active radical. Various characterization showed that the nitrogen-rich significantly improved the persistent free radical, defect degree, content of oxygen-containing groups, electrochemical conductivity and other catalytic activity related properties. Physicochemical characterization, Fe(II) semi-quantitative analysis and masking experiments confirmed that the doping of magnetic biochar with nitrogen increased its Fe(II) content (23.79 mg/g), approximately 2.6 times higher than that of pristine magnetic biochar. Moreover, N induces strong electron accretion of Fe atom through coordination bond, which leads to the increase of electron density on the Fe atom, which increases the content of Fe (II) in the material, thus improving the ability of the material to activate PS to generate 1O2, and promoting the degradation reaction of MNZ. This paper provides a method to improve the activation performance of magnetic biochar.

Copper removal and recovery from electroplating effluent with wide pH ranges through hybrid capacitive deionization using CuSe electrode

In modern industry, selective extraction and recovery of Cu from strongly acidic electroplating effluent are crucial to reduce carbon emissions, alleviate resource scarcity, and mitigate water pollution, yielding considerable economic and environmental benefits. This study proposed a high-efficiency CuSe electrode to selectively remove Cu from electroplating effluent via hybrid capacitive deionization (HCDI). The potential of this electrode was thoroughly evaluated to assess its effectiveness. The CuSe electrode exhibited superior deionization performance in terms of Cu adsorption capacity, selectivity, and applicability in various water matrices. Specifically, under strong acid conditions (1 M H⁺), the CuSe electrode maintained an optimal adsorption capacity of 357.36 mg g^-1 toward Cu²⁺. In systems containing salt ions, heavy metals, and actual electroplating wastewater, the CuSe electrode achieved a remarkable removal efficiency of up to 90% for Cu²⁺ with a high distribution coefficient K_d. Notably, the capacitive deionization (CDI) system demonstrated the simultaneous removal of Cu-EDTA. The removal mechanism was further revealed using ex-situ X-ray diffraction and X-ray photoelectron spectroscopy analyses. Overall, this study presents a practical approach that extends the capabilities of CDI platforms for effectively removing and recovering Cu from acidic electroplating effluent.

Type-wide biochars loaded with Mg/Al layered double hydroxide as adsorbent for phosphate and mixed heavy metal ions in water

This study discussed the adsorption of mixed heavy metal ions (Cu²⁺, Co²⁺, Pb²⁺) and phosphate ions by ten pristine biochars and those with precipitated Mg/Al layered double hydroxide (LDH). The pristine biochars have adsorption capacities of 6.9-13.4 mg/g for Cu²⁺, 1.1-9.7 mg/g for Co²⁺, 7.8-20.7 mg/g for Pb²⁺, and 0.8-4.9 mg/g for PO₄^3-. The LDH-biochars have markedly increased adsorption capacities of 20.4-25.8 mg/g for Cu²⁺, 8.6-15.0 mg/g for Co²⁺, 26.5-40.4 mg/g for Pb²⁺ with mixed metal ions, and 13.0-21.8 mg/g for PO₄^3-. Part of the Mg ions but Al ions are released from the LDH-biochars during adsorption, counting less than 7.2% of the adsorbed ions. The pristine biochars have specific adsorption sites for Cu²⁺ and Co²⁺, separate Pb²⁺ sites related to ether groups on biochar, and areal-dependent sites for PO₄^3-. There is no universal adsorption mechanism corresponding to mixed metal ion adsorption for individual pristine biochar involving different contributions of C-O-C, C-O-H, and CO groups and graphitic-N, pyrrolic-N, and pyridine-N groups. The LDH complexes with hydroxyl and carbonyl groups of biochar, and the LDH interacts with biochar's ether groups, which contributes to metal adsorption, against the conception that the biochar is merely a carrier of LDH as adsorbents.

Effect of Mn-based magnetic biochar /PS reaction system on oxidation of metronidazole

In order to fully exploit the potential of magnetic biochar-based persulfate (PS) systems, Mn was utilized to modify the magnetic biochar-based catalysts through impregnation-pyrolysis method. Taking metronidazole (MNZ), a typical antifungal drug, as the target contaminant, the reactivity of the synthesized magnetic biochar (MMBC) catalyst was evaluated. The degradation efficiency of MNZ in MMBC/persulfate system was 95.6%, which was 13.0 times higher than that in MBC/PS system. The characterization experiments confirmed the degradation of metronidazole by surface binding free radicals, the ·OH and 1O2 played the key role in remove of MNZ in the system of MMBC/PS. Physicochemical characterization, Fe(II) semi-quantitative analysis and masking experiments confirmed that the doping of MBC with Mn increased its Fe(II) content (43.0 mg/g), approximately 7.8 times higher than that of pristine MBC. The increase of Fe(II) content in MBC is the key reason to improve the optimization of MBC modified with Mn. Simultaneously, both Fe(II) and Mn(II) were the key components of PS activation by magnetic biochar. This paper presents a method to optimize the high efficiency of PS activation by magnetic biochar.

Adsorption of Congo red dye in water by orange peel biochar modified with CTAB

In order to improve the adsorption effect of biochar on Congo red dye, this study used hexadecyl trimethyl ammonium bromide (CTAB) to organically modify orange peel biochar (OBC) to produce CTAB-modified orange peel biochar (NOBC), and the biochar before and after modification was analyzed by SEM-EDS, FTIR and BET. The adsorption performance of NOBC on Congo red dye was investigated and the adsorption mechanism was studied. The results showed that the adsorption amount was influenced by the initial concentration, adsorption time and solution pH. NOBC adsorbed 50 mg L^-1 CR with an equilibrium time of 60 min and an equilibrium amount of 290.1 mg g^-1, while the adsorption equilibrium time of OBC was 210 min and an equilibrium amount of 155.2 mg g^-1, the adsorption of CR by NOBC was above 210 mg g^-1 at pH 2 to 11, NOBC can be recycled three times. The experimental results showed that the adsorption data of CR on NOBC were consistent with the Langmuir isothermal adsorption model and the Pseudo-second-order model, and the mechanism of CR adsorption on NOBC mainly included electrostatic attraction and surface adsorption. In conclusion, NOBC is a promising material for dye wastewater adsorption.

Enhanced efficiency and mechanism of low-temperature biochar on simultaneous removal of nitrogen and phosphorus by combined heterotrophic nitrification-aerobic denitrification bacteria

In this study, three strains of heterotrophic nitrification-aerobic denitrification (HN-AD) capable of simultaneously removing phosphorus were isolated from activated sludge, and low-temperature coconut shell biochar was prepared. The metabolic effects of combined HN-AD bacteria on the total nitrogen (TN) and total phosphorus (TP) were investigated, and the enhanced efficiency and mechanism of low-temperature biochar on the combined bacteria were also explored. The results indicated that the combined bacteria could adapt to environmental impacts and multiple nitrogen sources. The low-temperature biochar containing more aliphatic carbon and oxygen-containing functional groups enhanced the metabolic activity of combined HN-AD bacteria and accelerated the electron transfer process during nitrogen and phosphorus degradation. The removal efficiencies of TN and TP increased by 68% and 88%, respectively, in the treatment of actual sewage by biochar attached with combined bacteria. The findings form a basis for the engineering utilization of HN-AD and are of great practical significance.

Preparation of Molybdenum Disulfide with Different Nanostructures and Its Adsorption Performance for Copper (Ⅱ) Ion in Water

The environmental problems in the world are attracting increasing amounts of attention, and heavy metal pollution in the water has become one of the focuses of the ecological environment. Molybdenum disulfide (MoS₂) has excellent adsorption performance because of its extremely high specific surface area and unique active site structure, which has attracted an increasing amount of attention in the field of heavy metal disposal in various types of water. In this paper, two sorts of MoS₂ nanoparticles, spherical and lamellar, were synthesized by different chemical methods. Their morphology and structure were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and a Raman spectrometer. The adsorption properties of two sorts of MoS₂ nanoparticles for copper (Ⅱ) ions in water were investigated by changing the pH value, adsorption time, initial concentration of solution, adsorption temperature, etc. Finally, the adsorption mechanism was analyzed by kinetic, isothermal, and thermodynamic models. The results show that two microstructures of MoS₂ nanoparticles can be used as efficient adsorption materials for removing heavy metal ions from water, although there are differences in adsorption capacity between them, which expands the theoretical basis of heavy metal adsorption in a water environment.

Enhanced adsorption performance of bensulfuron methyl with B doping biochar: Mechanism and density functional theory calculations

It is an urgent task to develop suitable adsorbents for the control of herbicide-bensulfuron methyl (BSM) in the paddy rice fields at cold regions. Herein, B doping biochar was synthesized via one-step method. Results showed that the adsorption capacity for BSM on 1.0BBC was significantly superior to BC at 15 °C. Besides, low temperature resistance, wide pH adaptability, stable adsorption performance and reusability test suggested that 1.0BBC have potential practical application. The mechanisms of BSM removal by 1.0BBC were mainly attributed to pore filling and π-π electron donor-acceptor (EDA) interaction. Theoretical calculations revealed that BCO₂ could enhance the adsorption capacity by π-π EDA between BSM and adsorbent. Meanwhile, hydroponic experiment demonstrated that the toxicity to soybean after adsorption of BSM by 1.0BBC was within the safe range. This study proves that 1.0BBC is an easy-to-prepare adsorbent with promising application in BSM removal in the rice paddy fields at lower temperature.