Competitive algae biodiesel depends on advances in mass algae cultivation

Selection and characterization of acid-tolerant Chlorophyta division microalgae for potential metabolites production in a bubble column bioreactor: A ready-to-industrial scale screening

Microalgae are promising candidates for sustainable bioprocesses owing to their ability to capture/utilize CO2 and produce valuable metabolites. However, strain-to-strain variability poses a challenge to industrial scalability. This paper reports a study on the screening of 28 Chlorophyta microalgal strains from six species cultivated under standardized semi-continuous conditions in a bubble column bioreactor. Growth kinetics, nitrogen uptake, and metabolite accumulation were analyzed to identify strains characterized by promising biomass/metabolite productivities. The results indicated two distinct kinetic behaviors: a large fraction of the investigated strains was characterized by a common biomass/nitrate uptake behavior, and a subset of the strain pool was characterized by atypical nitrogen assimilation patterns. Strains characterized by high biomass growth rates are characterized by high lipid productivity. Strains with intermediate biomass growth rates are characterized by high carbohydrate accumulation. Chlorella vulgaris (ACUF 058) and Chloroidium saccharophilum (ACUF 050) emerged as strong candidates for carbohydrate and protein production, respectively. This study proposed a systematic procedure for strain selection, bridging laboratory screening, and industrial feasibility. These results emphasize the role of tailored cultivation strategies in optimizing biomass yield and metabolite productivity. Further research integrating genomic and proteomic insights will enhance strain-specific process optimization, facilitating the large-scale deployment of microalgal bioprocesses.

Application of response surface methodology on performance and emission characteristics of a diesel engine fueled with diesel, pentanol, and biogas

The current investigation's objective is to compare various pentanol/biogas/diesel fuel mixes' performance and exhaust parameters in a dual fuel engine. The varied flow rates of gaseous fuel (10, 20, and 30 L per minute) and pentanol fractions (10, 15, and 20%) in conventional diesel at various engine loads (20, 60, and 100%) were studied. Response surface approach was used to assess the researched variables in order to get the best model. The entire range of the proposed multivariate models was statistically significant in the current analysis, demonstrating the great accuracy of the models. Additionally, the values of the independent parameters were defined using the desirability technique to get the highest performance and the lowest engine-out emissions. As per the modeling results, the ideal operation condition was found at an engine load of 83%, a pentanol ratio of 10%, and a biogas flow rate of 30 L per minute. In particular, the use of biogas instead of fossil fuels is valuable both economically and in terms of climate studies. The projected values for the relevant reaction parameters at the recommended point were 22% brake thermal efficiency, 56 ppm unburned hydrocarbon emissions, 0.09% carbon monoxide emissions, 102 ppm nitrogen oxides emissions, and 24% emitted smoke. The response surface approach might be utilized to properly model and optimize a diesel engine that runs on a ternary mix, as demonstrated by the high desirability of 0.74 for derived models. The fuel used can be utilized to minimize the pollution coming out of tailpipe of diesel engines and also helps in enhancing the performance of the engine as compared to natural diesel.

Mini-review: Nanoparticles for enhanced biogas upgrading

This mini-review is intended to explore the innovative applications of nanoparticles (NPs) in biogas upgrading, emphasizing their capacity to enhance biogas quality. Numerous studies underscore how NPs, when applied during anaerobic digestion, can boost not only the quantity but also the quality of the produced biogas, leading to reduce significantly the concentration of hydrogen sulphide or even to remove it completely. Moreover, NPs are proving to be excellent alternatives as adsorbent materials, achieving up to 400 mgH2S g-1 NPs. In addition, new studies are exploring the application of NPs to increase the efficiency of biological treatments thanks to their unique features. This review also emphasizes the potential benefits and addresses the challenges that need to be overcome for these technologies to reach their full potential, ultimately contributing to the development of a sustainable and environmentally friendly energy landscape.

Flocculation of Micractinium reisseri for successful harvesting and potential use

This study includes Micractinium reisseri cultivation in artificial saline medium (ASM). With the aim of harvesting the bulk M. reisseri biomass, an experiment was set up at a bench scale to evaluate the best flocculation technique with the least compromising biomass and lipid loss. The flocculation efficiencies for the M. reisseri biomass have been studied using the auto-, bio-, and chemical-flocculation methods. Different concentrations of chitosan for the biological method and alum for the chemical method were added in M. reisseri culture growing in the liquid ASM. The optimal concentration with the highest biomass and oil collection was determined for each method. In the biological method, the highest (96.44%) and lowest (67.88%) flocculation efficiencies were observed by adding 15 and 2 mg of chitosan, respectively, and in the chemical method, the highest (97.2%) and lowest (35.4%) flocculation efficiencies were observed by adding 150 and 50 mg of alum, respectively. The auto-flocculation method shows the highest efficiency (97.8%) among all the tests. The oil yield from the three highest biomasses was 2.60, 1.51, and 1.08% in the auto-, bio-, and chemical-flocculation methods, respectively. The time taken for auto-, bio-, and chemical-flocculation was 48, 4, and 1 h, respectively.

Influence of multi-stress factors on the growth of Chlorella pyrenoidosa and Scenedesmus abundans using response surface methodology

This study evaluated the biofuel production potential of two algal species, Chlorella pyrenoidosa and Scenedesmus abundans, under stress conditions induced by nutrient supplementation or starvation at varying light intensities. Central composite face-centered design response surface methodology (CCFD-RSM) was employed to optimize stress conditions by varying the sodium nitrate (NaNO3), potassium dihydrogen phosphate (KH2PO4), dipotassium hydrogen phosphate (K2HPO4), cultivation time, and light intensity. The study included both C. pyrenoidosa and S. abundans, which presented increased biomass yields when subjected to nutrient starvation. Under the optimized conditions, the dry biomass yield was 98.26 mg/L for C. pyrenoidosa and 110 mg/L for S. abundans. Lipid yields were approximately 22.47% for C. pyrenoidosa and 29.06% for S. abundans under these optimized growth conditions. The optimized parameters for maximum biomass and lipid production were identified as C. pyrenoidosa, and the optimized conditions required 0.805 g/L NaNO3, 0.052 g/L K2HPO4, 0.099 g/L KH2PO4, 17 days of culture, and 5168.39 lx of light intensity. For S. abundans, the optimal conditions were 1.065 g/L NaNO3, 0.071 g/L K2HPO4, 0.058 g/L KH2PO4, 22 days of cultivation, and 2897 lx of light intensity. Overall, both C. pyrenoidosa and S. abundans have emerged as promising candidates for sustainable biodiesel production, highlighting their potential under stress conditions induced by nutrient modulation and variable light intensities.

A Comparative Analysis Assessing Growth Dynamics of Locally Isolated Chlorella sorokiniana and Chlorella vulgaris for Biomass and Lipid Production with Biodiesel Potential

Prior research has emphasized the potential of microalgae in biodiesel production, driven by their ability to replace fossil fuels. However, the significant costs associated with microalgae cultivation present a major obstacle to scaling up production. This study aims to develop an eco-friendly microalgae cultivation system by integrating carbon dioxide from flue gas emissions with an affordable photobioreactor, providing a sustainable biomass production. The research evaluates the growth performance of Chlorella sorokiniana and Chlorella vulgaris across this integrated system for biomass and lipid production. Results indicate substantial biomass yields of 1.97 and 1.84 g/L, with lipid contents of 35 % and 41 % for C. sorokiniana and C. vulgaris, respectively. The macrobubble photobioreactor demonstrates high potential for microalgae biomass and lipid production, yielding quality fatty acid methyl esters such as palmitic, linoleic and stearic. This study presents an environmentally friendly system for efficient microalgae cultivation, generating lipid-rich biomass suitable for biodiesel production.

Low-cost cultivation of Nannochloropsis oceanica in newly designed photobioreactors and its productivity trends in semi-continuous cultivation under inland outdoor conditions

Most marine microalgae are typically cultivated in coastal areas due to challenges in inland cultivation. In this 185 days experiment, Nannochloropsis oceanica was semi-continuously cultivated inland using different photobioreactors (PBRs). The newly designed 700-liter (L) PBR exhibited tolerance to seasonal changes compared to the 150-L PBRs. The innovative in-situ oxygen release rate (ORR) measurement method results indicated that ORR was influenced by light intensity and temperature. The optimal temperature range for N. oceanica growth was 14-25 ℃, demonstrated cold tolerance and lipid accumulation at low temperatures. The maximum lipid content in 700-L and 150-L PBRs was 29 % and 28 %, respectively. Based on the average biomass productivity, the price of N. oceanica was $11.89 kg-1 (or $3.35 kg-1 based on maximum biomass productivity), which is cheaper than the current market price of $20.19 kg-1. From results, smaller PBRs at the same hydro electricity price are more cost-effective.

Bioprospecting of Chlamydomonas reinhardtii for boosting biofuel-related products production based on novel aggregation-induced emission active extracellular polymeric substances nanoprobes

Biofuel production from microalgae has been greatly restricted by low biomass productivity and long-term photosynthetic efficacy. Here, a novel strategy for selecting high-growing, stress-resistant algal strains with high photosynthetic capacity was proposed based on biocompatible extracellular polymeric substances (EPS) probes with aggregation-induced emission (AIE) properties. Specifically, AIE active EPS probes were synthesized for in-situ long-term monitoring of the EPS productivity at different algal growth stages. By coupling the AIE-based fluorescent techniques, algal cells were classified into four diverse populations based on their chlorophyll and EPS signals. Mechanistic studies on the sorted algal cells revealed their remarkable stress resistance and high expression of cell division, biopolymer production and photosynthesis-related genes. The sorted and subcultured algal cells consistently exhibited relatively higher growth rates and photosynthetic capacities, resulting in an increased (1.2 to 1.8-fold) algal biomass production, chlorophyll, and lipids. This study can potentially open new strategies to boost microalgal-based biofuel production.

New insights into Chlorella vulgaris applications

Environmental pollution is a big challenge that has been faced by humans in contemporary life. In this context, fossil fuel, cement production, and plastic waste pose a direct threat to the environment and biodiversity. One of the prominent solutions is the use of renewable sources, and different organisms to valorize wastes into green energy and bioplastics such as polylactic acid. Chlorella vulgaris, a microalgae, is a promising candidate to resolve these issues due to its ease of cultivation, fast growth, carbon dioxide uptake, and oxygen production during its growth on wastewater along with biofuels, and other productions. Thus, in this article, we focused on the potential of Chlorella vulgaris to be used in wastewater treatment, biohydrogen, biocement, biopolymer, food additives, and preservation, biodiesel which is seen to be the most promising for industrial scale, and related biorefineries with the most recent applications with a brief review of Chlorella and polylactic acid market size to realize the technical/nontechnical reasons behind the cost and obstacles that hinder the industrial production for the mentioned applications. We believe that our findings are important for those who are interested in scientific/financial research about microalgae.

Biorefinery-centric ethanol and oleochemical production employing Yarrowia lipolytica and Pichia farinosa

The research examined the capabilities of Yarrowia lipolytica (YL) and Pichia farinosa (PF) in converting sugars to ethanol and oleochemicals. Lipid, ethanol, protein yield and gene-expressions were analysed at different substrate concentrations (3 to 30 g/L) with glucose, food waste, and fermentation-effluent. Optimal results were obtained at 20 g/L using both synthetic carbon with 4.6 % of total lipid yield. Lauric and Caprylic acid dominance was noted in total lipid fractions. Protein accumulation (6 g/L) was observed in glucose system (20 g/L) indicating yeast strains potential as single-cell proteins (SCP). Fatty-acid desaturase (FAD12) and alcohol dehydrogenase (ADH) expressions were higher at optimum condition of YL (1.15 × 10-1, 3.8 × 10-2) and PF (5.8 × 10-2, 3.8 × 10-2) respectively. Maximum carbon reduction of 87 % depicted at best condition, aligning with metabolic yield. These findings highlights promising role of yeast as biorefinery biocatalyst.

On-Site Pilot-Scale Microalgae Cultivation Using Industrial Wastewater for Bioenergy Production: A Case Study towards Circular Bioeconomy

This case study assesses the valorization of industrial wastewater streams for bioenergy generation in an industrial munition facility. On-site pilot-scale demonstrations were performed to investigate the feasibility of algal growth in the target wastewater on a larger outdoor scale. An exploratory field study followed by an optimized one were carried out using two 1000 L open raceway ponds deployed within a greenhouse at an industrial munition facility. An online system allowed for constant monitoring of operational parameters such as temperature, pH, light intensity, and dissolved oxygen within the ponds. The original algal seed evolved into an open-air resilient consortium of green microalgae and cyanobacteria that were identified and characterized successfully. Weekly measurements of the level of nutrients in pond liquors were performed along with the determination of the algal biomass to quantitatively evaluate growth yields. After harvesting algae from the ponds, the biomass was concentrated and evaluated for oil content and biochemical methane potential (BMP) to provide an estimate of the algae-based energy production. Additionally, the correlation among biomass, culturing conditions, oil content, and BMP was evaluated. The higher average areal biomass productivity achieved during the summer months was 23.9 ± 0.9 g/m2d, with a BMP of 350 scc/gVS. An oil content of 22 wt.% was observed during operation under low nitrogen loads. Furthermore, a technoeconomic analysis and life cycle assessment demonstrated the viability of the proposed wastewater valorization scenario and aided in optimizing process performance towards further scale-up.

Design and development of a highly efficient reusable zeolite impregnated ZnAl2O4 catalyst for biodiesel production

As the demand for sustainable energy sources expands, the production of biodiesel has attracted great attention. The development of effective and ecologically friendly biodiesel catalysts has become an urgent need. In this context, the goal of this study is to develop a composite solid catalyst with enhanced efficiency, reusability, and reduced environmental impact. For that, eco-friendly, and reusable composite solid catalysts have been designed by impregnating different amounts of zinc aluminate into a zeolite matrix (ZnAl2O4@Zeolite). Structural and morphological characterizations confirmed the successful impregnation of zinc aluminate into the zeolite porous structure. Catalytic experiments revealed that the catalyst containing 15 wt% ZnAl2O4 showed the highest conversion activity of fatty acid methyl esters (FAME) of 99% under optimized reaction conditions, including 8 wt% catalyst, a molar ratio of 10:1 methanol to oil, a temperature of 100 °C, and 3 h of reaction time. The developed catalyst demonstrated high thermal and chemical stability, maintaining good catalytic activity even after five cycles. Furthermore, the produced biodiesel quality assessment has demonstrated good properties in compliance with the criteria of the American Society for Testing and Materials ASTM-D6751 and the European Standard EN14214. Overall, the findings of this study could have a significant impact on the commercial production of biodiesel by offering an efficient and environmentally friendly reusable catalyst, ultimately reducing the cost of biodiesel production.

New insight into the concentration-dependent removal of multiple antibiotics by Chlorella sorokiniana

Microalgae have attracted increasing attention as an environmentally friendly treatment for antibiotics. However, the effect of antibiotic concentration on the removal ability of microalgae with the underlying mechanisms remains unclear. Thus, this work investigates the removal of tetracycline (TET), sulfathiazole (STZ), and ciprofloxacin (CIP) at different concentrations using Chlorella sorokiniana. The results indicate that microalgae have a concentration-dependent effect on antibiotic removal; however, the removal trends for the three antibiotics differed significantly. Specifically, TET showed nearly 100% removal efficiency at any concentration. The high concentration of STZ inhibited microalgal photosynthesis and induced the production of ROS, leading to antioxidant damage and inhibiting removal efficiency. Conversely, CIP enhanced the ability of microalgae to remove CIP by inducing a dual peroxidase and cytochrome p450 enzyme response. Furthermore, the economic analysis demonstrated that microalgae treatment antibiotics were calculated to be 4.93€/m³, which becomes cheaper than the other microalgae water treatment process.

High efficiency lipid production, biochar yield and chlorophyll a content of chlorella sp. microalgae exposed on sea water and TiO2 nanoparticles

This study explores the challenges facing microalgae biofuel production, specifically low lipid content and difficulties with algal cell harvesting. The purpose of the research is to investigate the effect of seawater content and nanoparticle concentration on freshwater microalgae growth and biofuel production. The principal results of the study show that increasing the proportion of seawater and nanoparticles enhances the lipid content and cell diameter of microalgae, while excessive concentrations of nanoparticles and low seawater content lead to reduced microalgae growth. Furthermore, an optimal cell diameter was identified at a nanoparticle concentration of 150 mg/L. The study also reveals that increasing seawater content can decrease zeta potential and increase chlorophyll a content due to the concentration of dissolved organic matter. Increasing the seawater content from 0% to 25% decreased zeta potential by 1% owing to the instability and aggregation of the cells. Chlorophyll a for the 0% seawater was 0.55 which is increased to 1.32 only due to the increase in the seawater content. This significant increase is due to the concentration of dissolved organic matter in seawater. Additionally, the presence of seawater positively affects microalgae metabolic activity and biochar yield. The findings of this study offer valuable insights into the potential for optimizing microalgae biofuel production. The use of seawater and nanoparticles has shown promise in enhancing microalgae growth and biofuel yield, and the results of this study underscore the scientific value of exploring the role of seawater and nanoparticles in microalgae biofuel production. Further research in this area has the potential to significantly contribute to the development of sustainable energy solutions.

The Growth Inhibition of Polyethylene Nanoplastics on the Bait-Microalgae Isochrysis galbana Based on the Transcriptome Analysis

The adverse effects of microplastics on microalgae species have been extensively studied, but their impact on the bait microalgae entering the food chain has not been well understood. This study investigated the cytological and physiological response of Isochrysis galbana to polyethylene microplastics (PE-MPs, 10 μm) and nanoplastics (PE-NPs, 50 nm). The results showed that PE-MPs had no significant impact on I. galbana, while PsE-NPs obviously inhibited cell growth, reduced chlorophyll content, and caused a decline in carotenoids and soluble protein. These changes in the quality of I. galbana could negatively affect its use as aquaculture feed. To understand the molecular response mechanism of I. galbana to PE-NPs, transcriptome sequencing was performed. The result revealed that the TCA cycle, purine metabolism, and some key amino acid syntheses were down-regulated by PE-NPs, while the Calvin cycle and fatty acid metabolism were up-regulated to tolerate PE-NP pressure. Microbial analysis showed that the bacterial community structure associated with I. galbana was significantly altered at the species level by PE-NPs. In conclusion, this study provides new insights into the physiological stress response caused by microplastic pollution based on transcriptome and bacterial community analysis. The findings highlight the need to mitigate the release of microplastics into the environment to prevent their harmful effects on aquatic ecosystems and will be helpful in understanding the impact of polyethylene nanoplastics on the bait microalgae.