Microalgae bio-oil production by pyrolysis and hydrothermal liquefaction: Mechanism and characteristics

Co-production and upgrading of multiple products from hydrothermal carbonization of microalgae with organic solvent assistance

Hydrothermal carbonization facilitates microalgae utilization but suffers from low product quality, with no effective solutions. This study investigated the product characteristics and quality enhancement methods of hydrochar, bio-oil, and carbon dots prepared through hydrothermal carbonization of microalgae assisted by non-polar organic solvents (petroleum ether and n-hexane) and polar organic solvents (ethyl acetate, isopropanol, and ethanol). The results showed that non-polar organic solvents were more effective than polar organic solvents in extracting fatty acids hydrolyzed from lipids into the organic phase, reducing amidation with amino acids and lowering bio-oil nitrogen content by 47.0%, with n-hexane exhibiting the best effect. They also promoted Maillard reactions, increasing hydrochar and carbon dots yields by 41.2% and 63.3% while boosting nitrogen content by 48.9% and 15.7%, respectively. This study explored the co-production and upgrading of multiple products in microalgae hydrothermal carbonization with organic solvent assistance, offering insights into process optimization for efficient utilization of microalgae.

Enhancing CO2 Fixation in Microalgal Systems: Mechanistic Insights and Bioreactor Strategies

Microalgae are small, single-celled, or simple multicellular organisms that contain Chlorophyll a, allowing them to efficiently convert CO2 and water into organic matter through photosynthesis. They are valuable in producing a range of products such as biofuels, food, pharmaceuticals, and cosmetics, making them economically and environmentally significant. Currently, CO2 is delivered to microalgae cultivation systems mainly through aeration with CO2-enriched gases. However, this method demonstrates limited CO2 absorption efficiency (13-20%), which reduces carbon utilization effectiveness and significantly increases carbon-source expenditure. To overcome these challenges, innovative CO2 supplementation technologies have been introduced, raising CO2 utilization rates to over 50%, accelerating microalgae growth, and reducing cultivation costs. This review first categorizes CO2 supplementation technologies used in photobioreactor systems, focusing on different mechanisms for enhancing CO2 mass transfer. It then evaluates the effectiveness of these technologies and explores their potential for scaling up. Among these strategies, membrane-based CO2 delivery systems and the incorporation of CO2 absorption enhancers have shown the highest efficiency in boosting CO2 mass transfer and microalgae productivity. Future efforts should focus on integrating these methods into large-scale photobioreactor systems to optimize cost-effective, sustainable production.

Efficient PAHs removal and CO2 fixation by marine microalgae in wastewater using an airlift photobioreactor for biofuel production

Microalgae cultures have emerged as a promising strategy in diverse areas, ranging from wastewater treatment to biofuel production, thus contributing to the search for carbon neutrality. These photosynthetic organisms can utilize the resources present in wastewater and fix atmospheric CO2 to produce biomass with high energy potential. In this study, the removal efficiency of Polycyclic Aromatic Hydrocarbons (PAHs), CO2 fixation and lipid content in the biomass produced from microalgae grown in airlift photobioreactor were evaluated. Four mesoscale cultures were carried out: Control (Seawater + Conway medium), Treatment A (Oil Produced Water + Poultry Effluent Water), Treatment B (Poultry Effluent Water + Seawater) and Treatment C (Oil Produced Water, Seawater and nutrients). The impact of biostimulation, through the addition of nutrients, on PAHs removal efficiency (up to 90%), CO2 fixation rate (up to 0.20 g L-1 d-1) and the composition of the generated biomass was observed. Primarily, the addition of nitrates to the culture medium impacted CO2 fixation rate of the microalgae. In addition, a direct correlation was observed between PAHs removal and lipid accumulation in the biomass, up to 36% in dry weight, demonstrating microalgae's ability to take advantage of the organic carbon (PAHs) present in the culture medium to generate lipid-rich biomass. The concentration of polysaccharides in the biomass obtained did not exceed 12% on a dry weight basis, and the Higher Heating Value (HHV) ranged between 17 and 21 MJ kg-1. Finally, the potential of generating hydrogen through pyrolysis was highlighted, taking advantage of the characteristics of biomass as a conversion route to produce biofuels. These results show that microalgae are effective in wastewater treatment and have great potential in producing biofuels, thus contributing to the transition towards more sustainable energy sources and climate change mitigation.

Review of recent advances in utilising aquaculture wastewater for algae cultivation and microalgae-based bioproduct recovery

Aquaculture operations produce large amounts of wastewater contaminated with organic matter, nitrogenous compounds, and other emerging contaminants; when discharged into natural water bodies, it could result in ecological problems and severely threaten aquatic habitats and human health. However, using aquaculture wastewater in biorefinery systems is becoming increasingly crucial as advancements in valuable bioproduct production continue to improve economic feasibility. Research on utilising microalgae as an alternative to producing biomass and removing nutrients from aquaculture wastewater has been extensively studied over the past decades. Microalgae have the potential to use carbon dioxide (CO2) effectively and significantly reduce carbon footprint, and the harvested biomass can also be used as aquafeed. Furthermore, aquaculture wastewater enriched with phosphorus (P) is a potential resource for P recovery for the production of biofertiliser. This will reduce the P supply shortage and eliminate the environmental consequences of eutrophication. In this context, the present review aims to provide a comprehensive overview of the current state of the art in a generation, as well as the characteristics and environmental impact of aquaculture wastewater reported by the most recent research. Furthermore, the review synthesized recent developments in algal biomass cultivation using aquaculture wastewater and its utilisation as biorefinery feedstocks for producing value-added products, such as aquafeeds, bioethanol, biodiesel, biomethane, and bioenergy. This integrated process provides a sustainable method for recovering biomass and water, fully supporting the framework of a circular economy in aquaculture wastewater treatment via resource recovery.

Simulation of biocrude production from P. tricornutum, S. platensis, and C. vulgaris using Aspenplus®

Hydrothermal liquefaction (HTL) of biomass is performed at elevated pressure and temperature to avoid the drying process. This process is also suitable for the low grade biomass with higher moisture content. In this article, simulation of three types of microalgae species, such as Phaeodactylum tricornutum, Spirulina platensis, and Chlorella vulgaris, are performed using Aspen Plus®. Simulation conditions, for instance, temperature, proximate and ultimate analyses, feed rate, water content, component names, etc., are taken from the literatures. The results of microalgae are then compared at two different temperature conditions. The values, however, are not the same for all the materials due to the data availability from the literature. The highest calorific value is obtained from C. vulgaris; it is 37.27 MJ/kg at 621K, and the highest energy recovery and energy ratio are obtained from P. tricornutum; they are 88.78 % and 1.86, both at 648K respectively. The difference between experimental and simulated calorific values of different biocrudes are ranging from 2.7 % to 3.62 % at higher temperatures and from 4.68 % to 10.72 % at lower temperatures. Finally, it is found that the simulation results corroborate with the experimental results with minimal errors.

Microalgae-mediated bioremediation: current trends and opportunities-a review

Environmental pollution poses a critical global challenge, and traditional wastewater treatment methods often prove inadequate in addressing the complexity and scale of this issue. On the other hand, microalgae exhibit diverse metabolic capabilities that enable them to remediate a wide range of pollutants, including heavy metals, organic contaminants, and excess nutrients. By leveraging the unique metabolic pathways of microalgae, innovative strategies can be developed to effectively remediate polluted environments. Therefore, this review paper highlights the potential of microalgae-mediated bioremediation as a sustainable and cost-effective alternative to conventional methods. It also highlights the advantages of utilizing microalgae and algae-bacteria co-cultures for large-scale bioremediation applications, demonstrating impressive biomass production rates and enhanced pollutant removal efficiency. The promising potential of microalgae-mediated bioremediation is emphasized, presenting a viable and innovative alternative to traditional treatment methods in addressing the global challenge of environmental pollution. This review identifies the opportunities and challenges for microalgae-based technology and proposed suggestions for future studies to tackle challenges. The findings of this review advance our understanding of the potential of microalgae-based technology wastewater treatment.

Investigating quantitative approach for microalgal biomass using deep convolutional neural networks and image recognition

The effective monitoring of microalgae cultivation is crucial for optimizing their energy utilization efficiency. In this paper, a quantitative analysis method, using microalgae images based on two convolutional neural networks, EfficientNet (EFF) and residual network (RES), is proposed. Suspension samples prepared from two types of dried microalgae powders, Rhodophyta (RH) and Spirulina (SP), were used to mimic real microalgae cultivation settings. The method's prediction accuracy of the algae concentration ranges from 0.94 to 0.99. RH, with a distinctively pronounced red-green-blue value shift, achieves a higher prediction accuracy than SP. The prediction results of the two algorithms were significantly superior to those of a linear regression. Additionally, RES outperforms EFF in terms of its generalization ability and robustness, which is attributable to its distinct residual block architecture. The RES provides a viable approach for the image-based quantitative analysis.

Synthesis, delineation and technological advancements of algae biochar for sustainable remediation of the emerging pollutants from wastewater-a review

The use of algae for value-added product and biorefining applications is enchanting attention among researchers in recent years due to its remarkable photosynthetic ability, adaptability, and capacity to accumulate lipids and carbohydrates. Algae biomass, based on its low manufacturing costs, is relatively renewable, sustainable, environmentally friendly and economical in comparison with other species. High production rate of algae provides a unique opportunity for its conversion to biochar with excellent physicochemical properties, viz. high surface area and pore volume, high adsorption capacity, abundant functional groups over surface, etc. Despite several potential algal-biochar, a detailed study on its application for removal of emerging contaminants from wastewater is limited. Therefore, this technical review is being carried out to evaluate the specific elimination of inorganic and organic pollutants from wastewater, with a view to assessing adsorption performances of biochar obtained from various algae species. Species-specific adsorption of emerging pollutants from wastewater have been discussed in the present review. The promising methods like pyrolysis, gasification, dry and wet torrefaction for the production of algae biochar are highlighted. The strategies include chemical and structural modifications of algae biochar for the removal of toxic contaminants have also been considered in the current work. The overall aim of this review is to confer about the synthesis, technological advancements, delineation and application of algae biochar for the treatment of wastewater.

A review on pretreatment methods for lipid extraction from microalgae biomass

Microalgal lipids are promising and sustainable sources for the production of third-generation biofuels, foods, and medicines. A high lipid yield during the extraction process in microalgae could be influenced by the suitable pretreatment and lipid extraction methods. The extraction method itself could be attributed to the economic and environmental impacts on the industry. This review summarizes the pretreatment methods including mechanical and non-mechanical techniques for cell lysis strategy before lipid extraction in microalgae biomass. The multiple strategies to achieve high lipid yields via cell disruption techniques are discussed. These strategies include mechanical (shear forces, pulse electric forces, waves, and temperature shock) and non-mechanical (chemicals, osmotic pressure, and biological) methods. At present, two techniques of the pretreatment method can be combined to increase lipid extraction from microalgae. Therefore, the extraction strategy for a large-scale application could be further strengthened to optimize lipid recovery by microalgae.

Hydrothermal liquefaction of municipal sludge and its products applications

Hydrothermal liquefaction (HTL) is an effective medium-temperature, high-pressure thermochemical process to dispose municipal sludge (MS), and biocrude (a crude bio-oil) is its main product. Many efforts are continued extensively to improve conversion efficiency and to promote industrial application of this technology. This work focuses on critical influencing factors (e.g., reaction temperature, residence time, atmosphere, solvent, catalyst, and pretreatment) and fundamental transformation mechanisms of main components (i.e., lipids, proteins, and carbohydrates) in MS HTL. It also analyzes migration behavior of heavy metals during MS HTL, which can provide a reference for subsequent recovery of nutrients from HTL products. Moreover, the applications of MS HTL products are systematically expounded, and potential challenges and opportunities are highlighted as well. It is necessary to develop advanced methods of catalyst recovery and innovative biocrude upgrading methods so as to reduce HTL investment and operating costs. Reusing aqueous phase and solid phase products as reaction medium and catalyst carrier separately after MS HTL is feasible to realize resource utilization of MS. This information can provide valuable guidance to promote MS HTL industrialization.

Life cycle assessment of integrated microalgae oil production in Bojongsoang Wastewater Treatment Plant, Indonesia

This study aims to determine the eco-friendliness of microalgae-based renewable energy production in several scenarios based on life cycle assessment (LCA). The LCA provides critical data for sustainable decision-making and energy requirement analysis, including net energy ratio (NER) and cumulative energy demand (CED). The Centrum voor Milieuwetenschappen Leiden (CML) IA-Baseline was used on environmental impact assessment method by SimaPro v9.3.0.3® software and energy analysis of biofuel production using native polyculture microalgae biomass in municipal wastewater treatment plants (WWTP) Bojongsoang, Bandung, Indonesia. The study was analyzed under three scenarios: (1) the current scenario; (2) the algae scenario without waste heat and carbon dioxide (CO2); and (3) the algae scenario with waste heat and carbon dioxide (CO2). Waste heat and CO2 were obtained from an industrial zone near the WWTP. The results disclosed that the microalgae scenario with waste heat and CO2 utilization is the most promising scenario with the lowest environmental impact (- 0.139 kg CO2eq/MJ), positive energy balance of 1.23 MJ/m3 wastewater (NER > 1), and lower CED value across various impact categories. It indicates that utilizing the waste heat and CO2 has a positive impact on energy efficiency. Based on the environmental impact, NER and CED values, this study suggests that the microalgae scenario with waste heat and CO2 is more feasible and sustainable to adopt and could be implemented at the Bojongsoang WWTP.

Bioengineering strategies of microalgae biomass for biofuel production: recent advancement and insight

Algae-based biofuel developed over the past decade has become a viable substitute for petroleum-based energy sources. Due to their high lipid accumulation rates and low carbon dioxide emissions, microalgal species are considered highly valuable feedstock for biofuel generation. This review article presented the importance of biofuel and the flaws that need to be overcome to ensure algae-based biofuels are effective for future-ready bioenergy sources. Besides, several issues related to the optimization and engineering strategies to be implemented for microalgae-based biofuel derivatives and their production were evaluated. In addition, the fundamental studies on the microalgae technology, experimental cultivation, and engineering processes involved in the development are all measures that are commendably used in the pre-treatment processes. The review article also provides a comprehensive overview of the latest findings about various algae species cultivation and biomass production. It concludes with the most recent data on environmental consequences, their relevance to global efforts to create microalgae-based biomass as effective biofuels, and the most significant threats and future possibilities.

Improving microalgae growth modeling of outdoor cultivation with light history data using machine learning models: A comparative study

Accurate prediction of microalgae growth is crucial for understanding the impacts of light dynamics and optimizing production. Although various mathematical models have been proposed, only a few of them have been validated in outdoor cultivation. This study aims to investigate the use of machine learning algorithms in microalgae growth modeling. Outdoor cultivation data of Phaeodactylum tricornutum in flat-panel airlift photobioreactors for 50 days were used to compare the performance of Long Short-Term Memory (LSTM) and Support Vector Regression (SVR) with traditional models, namely Monod and Haldane. The results indicate that the machine learning models outperform the traditional models due to their ability to utilize light history as input. Moreover, the LSTM model shows an excellent ability to describe the light acclimation effect. Last, two potential applications of these models are demonstrated: 1) use as a biomass soft sensor and 2) development of an optimal harvest strategy for outdoor cultivation.

Progress in thermochemical co-processing of biomass and sludge for sustainable energy, value-added products and circular economy

To achieve the main goal of net zero carbon emission, the shift from conventional fossil-based energy/products to renewable and low carbon-based energy/products is necessary. Biomass has been perceived as a carbon-neutral source from which energy and value-added products can be derived, while sludge is a slurry waste that inherently contains high amount of minerals and organic matters. Hence, thermochemical co-processing of biomass wastes and sludge could create positive synergistic effects, resulting in enhanced performance of the process (higher conversion or yield) and improved qualities or characteristics of the products as compared to that of mono-processing. This review presents the current progress and development for various thermochemical techniques of biomass-sludge co-conversion to energy and high-value products, and the potential applications of these products from circular economy's point of view. Also, these technologies are discussed from economic and environmental standpoints, and the outlook towards technology maturation and successful commercialization is laid out.