Nanoparticle-catalyzed reductive bleaching for fabricating turn-off and enzyme-free amplified colorimetric bioassays

A label-free aptasensor for colorimetric detection of food toxin: Mediation of catalytically active gold nanozymes and smartphone imaging strategy

A portable colorimetric aptasensor was developed on the surface of a plastic sheet for on-site detection of acrylamide. The mechanism of aptasensor is based on the disruption of the aptamer complex with its complementary strand on the sensing zone, and subsequently, the catalytic activity of gold nanoparticles (AuNPs) for the reduction process of 4-nitrophenol (4-NP) in the presence of sodium borohydride (NaBH4). A yellow-to-colorless change of the sample solution revealed the target presence, easily discernible by the naked eye. The acrylamide quantification was accomplished using the smartphone imaging readout technique. The aptasensor detected the acrylamide concentration in the range of 0.01-500 nmol L-1 with a detection limit of 0.0024 nmol L-1. Coffee, potato chips, bread, and lake water samples were successfully analyzed by the aptasensor for their acrylamide content. The introduced aptasensor can pave a facile, cost-effective, portable, and user-friendly sensing tool for food safety control and environmental monitoring.

A new method to amplify colorimetric signals of paper-based nanobiosensors for simple and sensitive pancreatic cancer biomarker detection

A low-cost, sensitive, and disposable paper-based immunosensor for instrument-free colorimetric detection of pancreatic cancer biomarker PEAK1 was reported for the first time by capitalizing the catalytic properties of gold nanoparticles in colour dye degradation. This simple signal amplification method enhances the detection sensitivity by about 10 fold.

Ce(III, IV)-MOF electrocatalyst as signal-amplifying tag for sensitive electrochemical aptasensing

Metal-organic frameworks (MOFs) as a new class of porous materials have attracted increasing attention in the field of biomimetic catalysis. This study firstly reports a mixed valence state Ce-MOF possessing intrinsic catalytic activity towards thionine (Thi), and its application in constructing an amplified electrochemical aptasensor for thrombin detection. As noticed, the novel catalytic process combines the advantages of 3D infinite extension of the Ce(III, IV)-MOF skeleton containing large amounts of catalytic sites and spontaneous recycling of the Ce(III)/Ce(IV) for electrochemical reduction of Thi, thereby presenting amplified electrochemical signals. To further improve the aptasensor performance, the high selectivity of proximity binding-induced DNA strand displacement and high efficiency of exonuclease III-assisted recycling amplification were incorporated into the assay. The aptasensor was employed to detect thrombin in complex serum samples, which shows high sensitivity, specificity, stability and reproducibility. This work offers an opportunity to develop MOF-based electrocatalyst as signal-amplifying tag for versatile bioassays and catalytic applications.

Noble metal nanoparticles in biosensors: recent studies and applications

The aim of this review is to cover advances in noble metal nanoparticle (MNP)-based biosensors and to outline the principles and main functions of MNPs in different classes of biosensors according to the transduction methods employed. The important biorecognition elements are enzymes, antibodies, aptamers, DNA sequences, and whole cells. The main readouts are electrochemical (amperometric and voltametric), optical (surface plasmon resonance, colorimetric, chemiluminescence, photoelectrochemical, etc.) and piezoelectric. MNPs have received attention for applications in biosensing due to their fascinating properties. These properties include a large surface area that enhances biorecognizers and receptor immobilization, good ability for reaction catalysis and electron transfer, and good biocompatibility. MNPs can be used alone and in combination with other classes of nanostructures. MNP-based sensors can lead to significant signal amplification, higher sensitivity, and great improvements in the detection and quantification of biomolecules and different ions. Some recent examples of biomolecular sensors using MNPs are given, and the effects of structure, shape, and other physical properties of noble MNPs and nanohybrids in biosensor performance are discussed.

Proximity Binding and Metal Ion-Dependent DNAzyme Cyclic Amplification-Integrated Aptasensor for Label-Free and Sensitive Electrochemical Detection of Thrombin

Thrombin plays important roles for the diagnosis of neurodegenerative and cardiovascular diseases. By integrating proximity binding-induced strand displacement and metal ion-dependent DNAzyme recycling amplification, we demonstrate here the development of a simple and sensitive strategy for the detection of thrombin in human serums. The binding of the two distinct aptamers to the thrombin targets increases the local concentration of the aptamers and facilitates the release of the enzymatic sequences through proximity binding-induced strand displacement. The liberated enzymatic sequences further hybridize with the G-quadruplex containing and hairpin-structured substrate sequences on the sensor electrode to form the metal-ion dependent DNAzymes. Subsequently, the metal ions catalyze the cleavage of the substrate sequences to unlock the G-quadruplex forming sequences and to release the enzymatic sequences to trigger another cleavage cycle. Such metal ion-dependent DNAzyme recycling amplification leads to the formation of many active G-quadruplex forming sequences, which associate with hemin to form G-quadruplex/hemin complexes on the electrode surface. Direct electron transfer of hemin to the electrode during the potential scan can thus generate significantly amplified current for sensitive detection of thrombin at the low picomolar level. The work demonstrated here can thus offer new opportunities for the development of convenient signal amplification strategies for detecting various protein targets.

Gold nanoparticle-catalyzed uranine reduction for signal amplification in fluorescent assays for melamine and aflatoxin B1

A multifunctional fluorescence platform has been constructed based on gold nanoparticle (AuNP)-catalyzed uranine reduction. The catalytic reduction of uranine was conducted in aqueous solution using AuNPs as nanocatalyst and sodium borohydride as reducing reagent, which was monitored by fluorescence and UV-vis spectroscopy. The reaction rate was highly dependent on the concentration, size and dispersion state of AuNPs. When AuNPs aggregated, their catalytic ability decreased, and thereby a label-free fluorescent assay was developed for the detection of melamine, which can be used for melamine determination in milk. In addition, a fluorescent immunoassay for aflatoxin B1 (AFB1) was established using the catalytic reaction for signal amplification based on target-induced concentration change of AuNPs, where AFB1-BSA-coated magnetic beads and anti-AFB1 antibody-conjugated AuNPs were employed as capture and signal probe, respectively. The detection can be accomplished in 1 h and acceptable recoveries in spiked maize samples were achieved. The developed fluorescence system is simple, sensitive and specific, which could be used for the detection of a wide range of analytes.

Microfluidic chip-based silver nanoparticles aptasensor for colorimetric detection of thrombin

In this paper, a colorimetric silver nanoparticles aptasensor (aptamer-AgNPs) was developed for simple and straightforward detection of protein in microfluidic chip. Surface-functionalized microfluidic channels were employed as the capture platform. Then the mixture of target protein and aptamer-AgNPs were injected into the microfluidic channels for colorimetric detection. To demonstrate the performance of this detection platform, thrombin was chosen as a model target protein. Introduction of thrombin could form a sandwich-type complex involving immobilized AgNPs. The amount of aptamer-AgNPs on the complex augmented along with the increase of the thrombin concentration causing different color change that can be analyzed both by naked eyes and a flatbed scanner. This method is featured with low sample consumption, simple processes of microfluidic platform and straightforward colorimetric detection with aptamer-AgNPs. Thrombin at concentrations as low as 20pM can be detected using this aptasensor without signal amplification. This work demonstrated that it had good selectivity over other proteins and it could be a useful strategy to detect other targets with two affinity binding sites for ligands as well.

Microextraction with phases containing nanoparticles

In this article, the state of the art of microextraction techniques that involve nanoparticles or nanomaterials (NPs) is reviewed, with special emphasis on the applications described in the biomedical field. The uses and advantages of the different types of NPs such as carbon nanotubes (either single- and multi-walled) and other carbon-based materials, metallic NPs, including gold, silver and magnetic NPs, and silica NPs are summarized. The main strategies used to modify the selectivity, extractive capacity and/or the stability of NPs through a chemical reaction are also reviewed. The potential advantages of NPs in different forms of off-line and on-line microextraction are discussed, and illustrative examples of application in the biomedical field are shown.

A highly sensitive fluorescence turn-on platform with silver nanoparticles aptasening for human platelet-derived growth factor-BB

In this paper, we demonstrated a simple and highly sensitive fluorescence platform for protein detection. Silver nanoparticles (AgNPs) worked as carriers and quenchers for FAM labeled aptamers (FAM-apt). Biotin labeled aptamers (Bio-apt), FAM-apt functionalized AgNPs (Ag-FAM-apt), and a target protein, human platelet-derived growth factor-BB (PDGF-BB) could form a sandwich-type complex. Once the etching solvents were added, AgNPs were dissolved and the fluorescence resonance energy transfer (FRET) between AgNPs and FAM was broken. FAM-apt were no longer quenched and released into the solution in the 96-well microplates, so the fluorescence signal would turn from "off" state to "on" state. This method had possessed several advantages: Firstly, increased specificity which was contributed by the sandwich binding of aptamers; Secondly, quenching ability of AgNPs which was utilized to make signal turn-on; Thirdly, high throughout in which 96 samples could be detected simultaneously. The results showed a linear relationship between fluorescence intensity and PDGF-BB concentration (10 ng mL(-1)-100 ng mL(-1)), and the detection limit was 7 ng mL(-1). This simple and sensitive method would have a promising future for development and application.

Colorimetric detection of human chorionic gonadotropin using catalytic gold nanoparticles and a peptide aptamer

We combined catalytic gold nanoparticles (AuNPs) with an hCG-specific peptide aptamer to create a simple, sensitive, label-free colorimetric assay for hCG. The applications of this colorimetric biosensor may be expanded by changing the peptide aptamer.

Controlled growth of immunogold for amplified optical detection of aflatoxin B1

A simple, sensitive and cost-effective method for the analysis of the mycotoxin aflatoxin B1 (AFB1) has been established based on controlled growth of immunogold.

Magnetic bead-based colorimetric immunoassay for aflatoxin B1 using gold nanoparticles

A competitive colorimetric immunoassay for the detection of aflatoxin B1 (AFB) has been established using biofunctionalized magnetic beads (MBs) and gold nanoparticles (GNPs). Aflatoxin B1-bovine serum albumin conjugates (AFB-BSA) modified MBs were employed as capture probe, which could specifically bind with GNP-labeled anti-AFB antibodies through immunoreaction, while such specific binding was competitively inhibited by the addition of AFB. After magnetic separation, the supernatant solution containing unbound GNPs was directly tested by UV-Vis spectroscopy. The absorption intensity was directly proportional to the AFB concentration. The influence of GNP size, incubation time and pH was investigated in detail. After optimization, the developed method could detect AFB in a linear range from 20 to 800 ng/L, with the limit of detection at 12 ng/L. The recoveries for spiked maize samples ranged from 92.8% to 122.0%. The proposed immunoassay provides a promising approach for simple, rapid, specific and cost-effective detection of toxins in the field of food safety.

PolyA-tailed and fluorophore-labeled aptamer-gold nanoparticle conjugate for fluorescence turn-on bioassay using iodide-induced ligand displacement

Depending on the strong affinity of polyA sequence to gold (or silver) surface, applicability of polyA-tailed DNA-gold (or silver) nanoparticle conjugates in homogeneous and heterogeneous protein assays was first demonstrated. Interestingly, when using polyA-tailed, fluophore-labeled DNA-AuNP conjugate, it was found that iodide and thiosulfate anions could act as the ligand displacing reagent to detach polyA-tailed DNA strands from AuNP surface and simultaneously activate the AuNP-quenched fluorophores by destroying the polyA-AuNP interaction via a divide-and-conquer strategy. Based on this new discovery, we have developed a novel, cost-effective and sandwich-type fluorescence turn-on aptasensor for highly sensitive and specific thrombin detection, what took advantage of aptamer-conjugated magnetic beads (apt-MBs) for protein capture and separation, and iodide-induced fluorescence recovery of activatable polyA-based AuNP probes through ligand displacement for fluorescence turn-on detection. This proposed aptasensor could detect thrombin specifically with a detection limit as low as 89pM, which was better than or comparable to many existing fluorescent thrombin assays. Importantly, employment of such polyA-based AuNP conjugate not only avoids the use of thiolated oligonucleotides and thiol-containing displacing reagents, but also offers new possibilities for fabricating convenient and cost-effective bioanalytical applications.

Monitoring thrombin generation and screening anticoagulants through pulse laser-induced fragmentation of biofunctional nanogold on cellulose membranes

Thrombin generation (TG) has an important part in the blood coagulation system, and monitoring TG is useful for diagnosing various health issues related to hypo-coagulability and hyper-coagulability. In this study, we constructed probes by using mixed cellulose ester membranes (MCEMs) modified with gold nanoparticles (Au NPs) for monitoring thrombin activity using laser desorption/ionization mass spectrometry (LDI-MS). The LDI process produced Au cationic clusters ([Au(n)](+); n = 1-3) that we detected through MS. When thrombin reacted with fibrinogen on the Au NPs-MCEMs, insoluble fibrin was formed, hindering the formation of Au cationic clusters and, thereby, decreasing the intensity of their signals in the mass spectrum. Accordingly, we incorporated fibrinogen onto the Au NPs-MCEMs to form Fib-Au NPs-MCEM probes to monitor TG with good selectivity (>1000-fold toward thrombin with respect to other proteins or enzymes) and sensitivity (limit of detection for thrombin of ca. 2.5 pM in human plasma samples). Our probe exhibited remarkable performance in monitoring the inhibition of thrombin activity by direct thrombin inhibitors. Analyses of real samples using our new membrane-based probe suggested that it will be highly useful in practical applications for the effective management of hemostatic complications.

Metal sulfide-functionalized DNA concatamer for ultrasensitive electronic monitoring of ATP using a programmable capillary-based aptasensor

A new flow-through electrochemical aptasensor was designed for ultrasensitive monitoring of adenosine triphosphate (ATP) by coupling microvalve-programmable capillary column with CdS-functionalized DNA concatamer for signal amplification. Initially, a layer of primary DNA-conjugated polyacrylamide hydrogel was covalently linked onto the internal surface of capillary column, and then an automated sequenctial injection format with a syringe pump was employed for development of the programmable capillary-based aptasensor. In the presence of target DNA aptamer, the immobilized primary DNA hybridized with partial bases of the aptamer. The excess aptamer fregment could trigger the formation of DNA concatamer between auxiliary DNA1 and CdS-labeled auxiliary DNA2. Upon target ATP introduction, a specific ATP-aptamer reaction was excuated, thereby resulting in the release of CdS-functionalized DNA concatamer from the capillary. Subsenquent anodic stripping voltammetric detection of cadmium released under acidic conditions from the released CdS nanoparticles could be conducted in a homemade detection cell. Under optimal conditions, the dynamic concentration range spanned from 0.1 pM to 10nM ATP with a detection limit of 0.06 pM ATP. The electrochemical aptasensor showed good reproducibility, selectivity, and stability. In addition, the methodology was evaluated for the analysis of ATP spiked serum samples, and the recoveries was 81-140%.