Ultrasensitive electrochemical biosensor based on graphite oxide, Prussian blue, and PTC-NH2 for the detection of α2,6-sialylated glycans in human serum

Glycan-Based Electrochemical Biosensors: Promising Tools for the Detection of Infectious Diseases and Cancer Biomarkers

Glycan-based electrochemical biosensors are emerging as analytical tools for determining multiple molecular targets relevant to diagnosing infectious diseases and detecting cancer biomarkers. These biosensors allow for the detection of target analytes at ultra-low concentrations, which is mandatory for early disease diagnosis. Nanostructure-decorated platforms have been demonstrated to enhance the analytical performance of electrochemical biosensors. In addition, glycans anchored to electrode platforms as bioreceptors exhibit high specificity toward biomarker detection. Both attributes offer a synergy that allows ultrasensitive detection of molecular targets of clinical interest. In this context, we review recent advances in electrochemical glycobiosensors for detecting infectious diseases and cancer biomarkers focused on colorectal cancer. We also describe general aspects of structural glycobiology, definitions, and classification of electrochemical biosensors and discuss relevant works on electrochemical glycobiosensors in the last ten years. Finally, we summarize the advances in electrochemical glycobiosensors and comment on some challenges and limitations needed to advance toward real clinical applications of these devices.

An efficient and simple method using a graphite oxide electrochemical sensor for the determination of glyphosate in environmental samples

Excessive and indiscriminate use of the herbicide glyphosate (GLY) leaves the environment susceptible to its contamination. This work describes the development of a simple, inexpensive, and efficient electroanalytical method using graphite oxide paste electrode (GrO-PE) for the direct determination of GLY traces in groundwater samples, soybean extracts, and lettuce extracts. Under optimal experimental conditions, the developed sensor exhibited a linear response of the peak current intensity vs. the concentration, in the range of 1.8 × 10^-5 to 1.2 × 10^-3 mol L^-1 for GLY. The limits of detection and quantification are 1.7 × 10^-8 mol L^-1 and 5.6 × 10^-8 mol L^-1, respectively. The methodology developed here demonstrated a strong analytical performance, with high reproducibility, repeatability, and precision. Moreover, it successfully avoided interference from other substances, showing high selectivity. The GrO-PE sensor was effectively applied to determine GLY traces in real samples with recovery rates ranging from 98% to 102%. Results showed that the GrO-PE is effective and useful for GLY detection, with the advantage of not involving laborious modifications and complicated handling, making it a promising tool for environmental analysis.

Simultaneous voltammetric sensing of levodopa, piroxicam, ofloxacin and methocarbamol using a carbon paste electrode modified with graphite oxide and β-cyclodextrin

A carbon paste electrode (CPE) was modified with graphite oxide (GrO) and β-cyclodextrin (CD) to obtain a sensor for simultaneous voltammetric determination of levodopa (LD), piroxicam (PRX), ofloxacin (OFX) and methocarbamol (MCB). The morphology, structure and electrochemical properties of the functionalized GrO were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, contact angle measurements and cyclic voltammetry. Under the optimal experimental conditions, the sensor is capable of detecting LD, PRX, OFX and MCB by square wave voltammetry (SWV) at working potentials of +0.40, +0.60, +1.03 and + 1.27 V (versus Ag/AgCl), respectively. Response is linear from 1.0 to 20 μM for LD, from 1.0 to 15 μM for PRX, from 1.0 to 20 μM for OFX, and from 1.0 to 50 μM for MCB. The respective limits of detection are 65, 105, 89 and 400 nM. The method was successfully applied to the simultaneous determination of LD, PRX, OFX and MCB in (spiked) real river water and synthetic urine samples, and the results were in agreement with those obtained using a spectrophotometric method, with recoveries close to 100%. Graphical abstract Schematic presentation of a novel electroanalytical method employing a carbon paste electrode modified with graphite oxide and β-cyclodextrin for the simultaneous determination of levodopa, piroxicam, ofloxacin and methocarbamol in urine and river water samples by square wave voltammetry.

Dual-type responsive electrochemical biosensor for the detection of α2,6-sialylated glycans based on AuNRs-SA coupled with c-SWCNHs/S-PtNC nanocomposites signal amplification

In this study, a dual-type responsive electrochemical biosensor was developed for the quantitative detection of α2,6-sialylated glycans (α2,6-sial-Gs), a potential biomarker of tumors. The gold nanorods (AuNRs), which exhibited great specific surface area, as well as good biocompatibility, was synthesized by the way of seed growth method. Furthermore, a biotin-streptavidin (biotin-SA) system was introduced to improve the immunoreaction efficiency. Accordingly, a label-free biosensor was fabricated based on AuNRs-SA for the quick detection of α2,6-sial-Gs by recording the signal of differential pulse voltammetry (DPV). Furthermore, to expand the ultrasensitive detection of α2,6-sial-Gs, a carboxylated single-walled carbon nanohorns/sulfur-doped platinum nanocluster (c-SWCNHs/S-PtNC) was synthesized for the first time as a novel signal label, which showed an excellent catalytic performance. The usage of c-SWCNHs/S-PtNC could significantly amplify the electrochemical signal recorded by the amperometric i-t curve. Herein, a sandwich type biosensor was constructed by combining the AuNRs-SA on the electrode and c-SWCNHs/S-PtNC (signal amplifier). The label-free biosensor possessed a linear range from 5 ng mL^-1 to 5 μg mL^-1 with a detection limit of 0.50 ng mL^-1, and the sandwich-type biosensor possessed a wide linear range from 1 fg mL^-1 to 100 ng mL^-1 with a detection limit of 0.69 fg mL^-1. Furthermore, the biosensor exhibited excellent recovery and stability, indicating its potential for use in actual samples.

Direct Immunoassay for Facile and Sensitive Detection of Small Molecule Aflatoxin B1 based on Nanobody

Aflatoxin B₁ (AFB₁ ), one of the most toxic mycotoxins, is classified as a group I carcinogen and ubiquitous in various foods and agriproducts. Thus, accurate and sensitive determination of AFB₁ is of great significance to meet the criteria of food safety. Direct detection of AFB₁ is difficult by monoclonal antibody (mAb) with large molecular size (≈150 kD) since the target is too small to produce a detectable signal change. Herein, by combining the electrochemical properties of nanomaterials and the advantages of nanobodies, we developed a direct, highly selective and sensitive electrochemical immunosensor for small molecule detection. The proposed immunosensor had a wide calibration range of 0.01 to 100 ng mL^-1 and a low detection limit of 3.3 pg mL^-1 (S/N=3). Compared with the immunosensor prepared with mAb which was applied in the typical indirect immunoassay, the immunosensor in this work possessed two orders of magnitudes wider linear range and 10-fold more sensitivity. The as-obtained immunosensor was further successfully applied for sensing AFB₁ in real samples. This proposed assay would provide a simple, highly sensitive and selective approach for the direct immunoassay of small molecule AFB₁ , and is extendable to the development of direct immunosensing systems for other small molecules detection by coupling nanocarbon and nanobody.

Nanotechnology in Glycomics: Applications in Diagnostics, Therapy, Imaging, and Separation Processes

This review comprehensively covers the most recent achievements (from 2013) in the successful integration of nanomaterials in the field of glycomics. The first part of the paper addresses the beneficial properties of nanomaterials for the construction of biosensors, bioanalytical devices, and protocols for the detection of various analytes, including viruses and whole cells, together with their key characteristics. The second part of the review focuses on the application of nanomaterials integrated with glycans for various biomedical applications, that is, vaccines against viral and bacterial infections and cancer cells, as therapeutic agents, for in vivo imaging and nuclear magnetic resonance imaging, and for selective drug delivery. The final part of the review describes various ways in which glycan enrichment can be effectively done using nanomaterials, molecularly imprinted polymers with polymer thickness controlled at the nanoscale, with a subsequent analysis of glycans by mass spectrometry. A short section describing an active glycoprofiling by microengines (microrockets) is covered as well.

A novel non-invasive detection method for the FGFR3 gene mutation in maternal plasma for a fetal achondroplasia diagnosis based on signal amplification by hemin-MOFs/PtNPs

The small amount of cell-free fetal DNA (cffDNA) can be a useful biomarker for early non-invasive prenatal diagnosis (NIPD) of achondroplasia. In this study, a novel non-invasive electrochemical DNA sensor for ultrasensitive detecting FGFR3 mutation gene, a pathogenic gene of achondroplasia, based on biocatalytic signal materials and the biotin-streptavidin system are presented. Notably encapsulation of hemin in metal-organic frameworks-based materials (hemin-MOFs) and platinum nanoparticles (PtNPs) were used to prepare hemin-MOFs/PtNPs composites via a one-beaker-one-step reduction. We utilized hemin-MOFs/PtNPs for signal amplification because the promising hemin-MOFs/PtNPs nanomaterial has remarkable ability of catalyze H₂O₂ as well as excellent conductivity. To further amplify the electrochemical signal, reduced graphene oxide-tetraethylene pentamine (rGO-TEPA), gold nanoparticles and streptavidin were selected for modification of the electrode to enhance the conductivity and immobilize more biotin-modified capture probe (Bio-CP) through the high specificity and superior affinity between streptavidin and biotin. The electrochemical signal was primarily derived from the synergistic catalysis of H₂O₂ by hemin and PtNPs and recorded by Chronoamperometry. Under the optimal conditions, this newly designed biosensor exhibited sensitive detection of FGFR3 from 0.1fM to 1nM with a low detection limit of 0.033fM (S/N=3). We proposed that this ultrasensitive biosensor is useful for the early non-invasive prenatal diagnosis of achondroplasia.

Toxicological evaluation of Prussian blue nanoparticles after short exposure of mice

Prussian blue nanoparticle (PBNP), a new type of theranostic nanomaterial, had been used for cancer magnetic resonance imaging and photothermal therapy. However, their long-term toxicity after short exposure in vivo was still unclear. In this study, we investigated the dynamic changes of the biochemical and immunity indicators of mice after PBNPs injection through tail vein. Histological results showed that the PBNPs were mainly accumulated in liver and spleen. In the spleen, we found the frequency of T cells was starting to decrease after 1 day of PBNPs injection, but then slowly recovered to normal level after 60 days of injection. Meanwhile, the frequency of T cells in the blood was firstly decreased after the PBNPs injection, and then the T cell frequency kept increasing and recovered back to normal levels after 7 days of injection. The serum indexes of liver functions (alanine transaminase, aspartate transaminase, total bilirubin, and alkaline phosphatase) increased rapidly to a relatively high level only after 1 h of injection, which meant certain acute liver damage, but these indexes were gradually decreased to normal levels after 60 days of injection. These results indicate that PBNPs have acute toxicity in vivo, however, their long-term toxicity after short-time exposure is low, which might provide guidance for further applications of PBNPs in future.

A sensitive electrochemiluminescent aptasensor based on perylene derivatives as a novel co-reaction accelerator for signal amplification

Herein, a novel signal amplification strategy was designed using the perylene derivative as the co-reaction accelerator toward graphene-CdTe quantum dots (G-CdTe)/S2O8(2-) system to construct a highly sensitive electrochemiluminescent (ECL) aptasensor for thrombin (TB) detection. Firstly, the G-CdTe nanocomposites were prepared by one-step method of in situ generating CdTe quantum dots onto the surface of the graphene oxide by using 3-mercaptopropionic acid as the CdTe QDs stabilizer. Then, a kind of perylene derivative (PTC-Lys), was synthesized by covalently binding L-lysine to 3,4,9,10-perylenetetracarboxylic acid, which was further immobilized onto the G-CdTe by the π-π* stacking and cross-linked the detection thrombin aptamer (TBA II) to obtain the TBA II/PTC-Lys/G-CdTe signal probes. It is worth pointing out that PTC-Lys acting as an efficient co-reaction accelerator interacted with the co-reactant of S2O8(2-) rather than G-CdTe to promote the more oxidant mediators of SO4(•-), which could further react with G-CdTe to produce excited state species G-CdTe* for emitting light. Compared with the G-CdTe/S2O8(2-) ECL system, our proposed strategy with the introduction of co-reaction accelerator of PTC-Lys exhibited ultra-high sensitivity to quantify the concentration of TB from 1.0×10(-7)nM to 10nM with a detection limit of 34aM.

A switched catalysis qualified sealers capped one-step synthesis biocompatibility bimetallic scaffold film for Neu5Acα(2-6)Gal β MP Glycoside specific detection

In this work, a novel label-free biosensor was designed for the sensitive and selective determination of Neu5Acα(2-6)Gal β MP Glycoside using AuPt-PPy(polypyrrole) conductive nanocomposite film as the sensor platform. The introduced AuPt-PPy nanocomposite provided a large surface area for the immobilization of Sambucus nigra agglutinis (SNA) through a coupling agent for specifically recognizing analytes and exhibited high electrocatalytic activity toward the reduction of hydrogen peroxide (H2O2) as an analytical signal. Subsequently, to block the non-specific sites of the modified electrode, GOx was employed instead of the usual sealers. Most importantly, in the presence of glucose, these localized GOx further enhanced the electrochemical signal, which was achieved by the efficient catalysis of glucose. This study is the first that demonstrates the specific detection of Neu5Acα(2-6)Gal β MP Glycoside using AuPt-PPy as the electrocatalytic. Under optimal conditions, the electrochemical biosensor exhibited a wide linear range of 0.01 pgmL(-1)-800 ngmL(-1) with a low detection limit of 0.003 pgmL(-1) (S/N=3), due to the affinity between SNA and Neu5Acα(2-6)Gal β MP Glycoside. Therefore, the co-catalysis signal amplification approach has considerable potential in clinical applications and is suitable for the quantification of other biomarkers.

Multi-purpose electrochemical biosensor based on a “green” homobifunctional cross-linker coupled with PAMAM dendrimer grafted p-MWCNTs as a platform: application to detect α2,3-sialylated glycans and α2,6-sialylated glycans in human serum

Sialylated glycans are crucial molecular targets for cancer diagnosis and clinical research.

A novel electrochemical immunosensor based on the rGO-TEPA-PTC-NH₂ and AuPt modified C₆₀ bimetallic nanoclusters for the detection of Vangl1, a potential biomarker for dysontogenesis

The aberrant expression of Vangl1 is highly correlated with dysontogenesis, especially for neural tube defects. Therefore, the ultrasensitive detection of Vangl1 would provide a new approach for the specific early diagnostics in dysembryoplasia. However, no quantitative detection method is currently available. Herein, we describe the development of a new approach to fill this assay gap. We utilized C60-templated AuPt bimetallic nanoclusters for signal amplification because the promising C60 nanomaterial provides a large surface area for the in site reduction of bimetallic nanocomposites as well as excellent conductivity. To further amplify the electrochemical signal, reduced graphene oxide-tetraethylene pentamine (rGO-TEPA) and a derivative of 3,4,9,10-perylenetetracarboxylicdianhydride (PTC-NH2) were selected for modification of the electrode to provide more amino groups for the immobilization of antibodies and to enhance the conductivity. The electrochemical signal was primarily derived from the catalysis of H2O2 by C60-AuPt. Chronoamperometry was applied to record the electrochemical signals. Under optimal conditions, the prepared immunosensor exhibited a wide linear range from 0.1 pg mL(-1) to 450 pg mL(-1) and a low detection limit of 0.03 pg mL(-1). Moreover, the proposed method exhibited good stability and recovery, suggesting its potential for use in clinical research.

Graphene-based nanoprobes for molecular diagnostics

In recent years, graphene has received widespread attention owing to its extraordinary electrical, chemical, optical, mechanical and structural properties. Lately, considerable interest has been focused on exploring the potential applications of graphene in life sciences, particularly in disease-related molecular diagnostics. In particular, the coupling of functional molecules with graphene as a nanoprobe offers an excellent platform to realize the detection of biomarkers, such as nucleic acids, proteins and other bioactive molecules, with high performance. This article reviews emerging graphene-based nanoprobes in electrical, optical and other assay methods and their application in various strategies of molecular diagnostics. In particular, this review focuses on the construction of graphene-based nanoprobes and their special advantages for the detection of various bioactive molecules. Properties of graphene-based materials and their functionalization are also comprehensively discussed in view of the development of nanoprobes. Finally, future challenges and perspectives of graphene-based nanoprobes are discussed.

New faces of porous Prussian blue: interfacial assembly of integrated hetero-structures for sensing applications

Prussian blue (PB), the oldest synthetic coordination compound, is a classic and fascinating transition metal coordination material. Prussian blue is based on a three-dimensional (3-D) cubic polymeric porous network consisting of alternating ferric and ferrous ions, which provides facile assembly as well as precise interaction with active sites at functional interfaces. A fundamental understanding of the assembly mechanism of PB hetero-interfaces is essential to enable the full potential applications of PB crystals, including chemical sensing, catalysis, gas storage, drug delivery and electronic displays. Developing controlled assembly methods towards functionally integrated hetero-interfaces with adjustable sizes and morphology of PB crystals is necessary. A key point in the functional interface and device integration of PB nanocrystals is the fabrication of hetero-interfaces in a well-defined and oriented fashion on given substrates. This review will bring together these key aspects of the hetero-interfaces of PB nanocrystals, ranging from structure and properties, interfacial assembly strategies, to integrated hetero-structures for diverse sensing.

Electrochemical response of nitrite and nitric oxide on graphene oxide nanoparticles doped with Prussian blue (PB) and Fe2O3 nanoparticles

Electrocatalytic behaviour of graphene oxide (GO), iron(iii) oxide (Fe₂O₃) and Prussian blue (PB) nanoparticles towards nitrite (NO₂⁻) and nitric oxide (NO) oxidation was investigated on a platinum modified electrode.

PB@Co3O4 nanoparticles as both oxidase and peroxidase mimics and their application for colorimetric detection of glutathione

Co₃O₄-modified Prussian blue nanocubes (PB@Co₃O₄) were obtained by using a water-bath method and were found to exhibit both intrinsic oxidase-like and peroxidase-like activities.