Synthesis of hydrophilic and conductive molecularly imprinted polyaniline particles for the sensitive and selective protein detection

Fabrication of molecularly imprinted carbon nanotubes integrating ionic liquids for efficient detection of perfluoroalkyl carboxylic acid in environmental water

It is extremely significant while challenging to accurately detect low-levels of perfluoroalkyl carboxylic acid compounds (PFCAs) in environmental water. Herein, adopting perfluorotetradecanoic acid as the dummy template, selective molecularly imprinted composites (CNTs@ILs@MIPs) grafted carbon nanotubes integrating hydrophilic ionic liquids were successfully prepared via surface imprinting and dummy-template imprinting techniques. The obtained CNTs@ILs@MIPs were applied as selective extraction adsorbent for specifically extract PFCAs in environmental water coupled with gas chromatography-mass spectrometry quantification. Detailed studies were conducted on the main preparation parameters and extraction conditions. The CNTs@ILs@MIPs displayed excellent adsorptivity, and the established method exhibited low LODs (0.60-1.64 ng L-1), wide linearity with R2 above 0.9994, and satisfactory adsorption recoveries (80.5-112.5%) for seven PFCAs. This proposed method provides a new applicable approach for the detection of targeted pollutants in environmental water by utilizing the high affinity and recognition ability of molecularly imprinted carbon nanotube functional materials modified with ionic liquids.

A new PdMOF-loaded molecularly imprinted polyaniline nanocatalytic probe for ultratrace oxytetracycline with SERS technique

In this paper, a new Pd metal organic framework (PdMOF) surface molecularly imprinted polyaniline nanocatalytic probe (PdMOF@MIP) with dual functions of recognition and catalysis was synthesized. It is found that the PdMOF@MIP nanoprobe can not only identify OTC but also catalyze the new nanoreaction of NaH2PO2-HAuCl4 to generate gold nanoparticles (AuNPs), and the generated AuNPs could be traced by surface-enhanced Raman scattering (SERS). When OTC specifically binds to PdMOF@MIP to generate PdMOF@MIP-OTC conjugate, its catalytic effect is weakened and the analytical signal is reduced linaerly. Accordingly, a new, highly sensitive, selective and simple SERS/RRS/Abs trimode detection platform for OTC was constructed. The linear range of SERS was 0.0625 ng/mL ∼ 1.75 ng/mL and the limit of detection was 0.015 ng/mL. This new nanocatalytic probe detection strategy can also be used for the selective detection of other antibiotics such as tetracycline and doxycycline, respectively. In addition, the nanocatalytic mechanism has been investigated.

A novel and ultrasensitive electrochemical immunosensor based on nanocellulose-Ti3C2Tx@ZrO2 nano framework for the detection of ovalbumin

A versatile and highly sensitive sensing platform based on nanocellulose/MXene/ZrO2 nano framework has been developed at the surface of a glassy carbon electrode (GCE) for detecting ovalbumin (Ova). To create this innovative nano framework, dialdehyde groups were introduced onto the surface of cellulose nanofibers (CNFs), which were then decorated with MXene nanosheets and nanostructured zirconia. Nanocellulose/MXene/ZrO2 nano framework was used as electrochemical mediator and immobilization environment that provided the large surface area and 197 % increment in the electrochemical signal which allowed the Ova detection in the femtomolar range. Ovalbumin antibody was immobilized on the surface of dialdehyde cellulose nanofiber through covalent bonding between amino groups of Ova and dialdehyde groups of CNFs. The assembly process of nano framework, anti-Ova, and Ova antigen were characterized using electrochemical approaches (CV and DPV). The fabricated immunosensor is further applied to DPV detection of Ova and it demonstrated a linear response to Ova antigen in the linear range of 0.01-1000 pg/mL. With optimal experimental conditions, the detection limit, quantification limit and sensitivity of Ova were found to be 1.1 fg/mL, 0.01 pg/mL and 0.1497 μA pg/mL cm-2, respectively. The fabricated immunosensor exhibited high selectivity, reproducibility, and interference resistance and achieved excellent recoveries in real food samples spiked with Ova, indicating its potential applicability in food safety monitoring.

Nonenzymatic Flexible Wearable Biosensors for Vitamin C Monitoring in Sweat

Nutritional status monitoring plays an important role in the maintenance of human health and disease prevention. Monitoring the intake of vitamins can support the improvement of diet behavior. In this work, a polyaniline (PANI) film-based nonenzymatic electrochemical sensor was prepared to track the vitamin C level in sweat. The PANI film was modified with organic acids (ethylformic acid, malic acid, tartaric acid, and phytic acid). The phytic acid-modified PANI film based on sensor has a wide detection range (0.5-500 μmol·L^-1), high sensitivity (665.5 and 326.2 μA·(mmol·L^-1)^-1·cm^-2), and low detection limit (0.17 μmol·L^-1) toward vitamin C in sweat. The phytate enhances the band transport between PANI chains, which increases the electrical conductivity of the film to improve the electrochemical properties of the sensor. In addition, we monitored changes of vitamin C levels in human body after taking vitamin C pills by detecting sweat or saliva. The ability to track the pharmacological profile demonstrates the potential of PANI film-based sensors for applications in personalized nutritional intake and tracking. And a simple and portable vitamin C detection system was developed to improve the practicability of the sensor. This work provides an idea for the application of wearable electrochemical sensing devices in nutrition guidance.

Molecularly imprinted polymers for per- and polyfluoroalkyl substances enrichment and detection

Per- and polyfluoroalkyl substances (PFAS) are highly toxic pollutants of significant concern as they are being detected in water, air, fish and soil. They are extremely persistent and accumulate in plant and animal tissues. Traditional methods of detection and removal of these substances use specialised instrumentation and require a trained technical resource for operation. Molecularly imprinted polymers (MIPs), polymeric materials with predetermined selectivity for a target molecule, have recently begun to be exploited in technologies for the selective removal and monitoring of PFAS in environmental waters. This review offers a comprehensive overview of recent developments in MIPs, both as adsorbents for PFAS removal and sensors that selectively detect PFAS at environmentally-relevant concentrations. PFAS-MIP adsorbents are classified according to their method of preparation (e.g., bulk or precipitation polymerization, surface imprinting), while PFAS-MIP sensing materials are described and discussed according to the transduction methods used (e.g., electrochemical, optical). This review aims to comprehensively discuss the PFAS-MIP research field. The efficacy and challenges facing the different applications of these materials in environmental water applications are discussed, as well as a perspective on challenges for this field that need to be overcome before exploitation of the technology can be fully realised.

A flower-like ionic molecularly imprinted membrane for the deglycosylation of rutin

A kind of molecularly imprinted polymer based on ionic liquids (MIPIL) with flower-like shape was developed for the adsorption of rutin and its deglycosylated product. The MIPIL film was characterized by scanning electron microscope (SEM) and X-ray photo-electron spectroscopy (XPS). The adsorption capacity of quercetin on the proposed imprinted cavity of rutin in the presence of glucose and rhamnose was 3.7 ± 0.017 times as much as that in the absence of glucose and rhamnose. And the adsorption capacity of quercetin varied with the concentration of glucose and rhamnose changing. Thus, the proposed MIPIL film coupled with HPLC was used to explore the deglycosylation of rutin by tracking rutin and quercetin, which confirmed to the pseudo-first-order reaction kinetic with the constant of 0.044 ± 1.5 × 10^-4 min^-1 at 35 °C. The rutin and quercetin were quantified using the above MIPIL film in the two Ginkgo leaves extracted by pure water and pure ethanol, respectively. Because of lower solubility in water, the content of rutin in ethanol extraction solution was higher than in water solution. On the contrary, the content of quercetin in water extraction solution was higher than in ethanol solution, which resulted from the higher solubility of glucose and rhamnose in water. The RSD ranged from 2.8 to 4.5%, and the recovery rate ranged from 91.9 to 105.3%.

Consolidation of hydrogenotrophic methanogenesis by sulfidated nanoscale zero-valent iron in the anaerobic digestion of food waste upon ammonia stress

The feasibility of adding sulfidated nanoscale zero-valent iron (S-nZVI) into anaerobic systems to improve anaerobic digestion of food waste (FW) under ammonia stress was evaluated in this study. The addition of S-nZVI improved the methane production compared to nanoscale zero-valent iron (nZVI), indicating that sulfidation significantly reinforced the enhancement effect of nZVI in consolidating the hydrogenotrophic methanogenesis. The promoted methanogenic performance was associated with chemical reaction and variances of microbial community induced by S-nZVI. With the characteristics of generation of Fe²⁺ and slow-release of H₂, S-nZVI made the anaerobic system respond positively in facilitating extracellular polymeric substances secretion and optimizing the microbial community structure. Moreover, microbial community analysis showed that S-nZVI addition enriched the species related to biohydrogen production (e.g., Prevotella) and ammonia-tolerant hydrogenotrophic methanogenesis (e.g., Methanoculleus), possibly enhancing the hydrogenotrophic methanogenesis pathway to accelerate methane production. Therefore, adding S-nZVI into the anaerobic systems might propose a feasible engineering strategy to improve the methanogenic performance of the anaerobic digestion of FW upon ammonia stress.

Artificial Biomimetic Electrochemical Assemblies

Rapid, selective, and cost-effective detection and determination of clinically relevant biomolecule analytes for a better understanding of biological and physiological functions are becoming increasingly prominent. In this regard, biosensors represent a powerful tool to meet these requirements. Recent decades have seen biosensors gaining popularity due to their ability to design sensor platforms that are selective to determine target analytes. Naturally generated receptor units have a high affinity for their targets, which provides the selectivity of a device. However, such receptors are subject to instability under harsh environmental conditions and have consequently low durability. By applying principles of supramolecular chemistry, molecularly imprinted polymers (MIPs) can successfully replace natural receptors to circumvent these shortcomings. This review summarizes the recent achievements and analytical applications of electrosynthesized MIPs, in particular, for the detection of protein-based biomarkers. The scope of this review also includes the background behind electrochemical readouts and the origin of the gate effect in MIP-based biosensors.

A molecularly imprinted biosensor based on water-compatible and electroactive polymeric nanoparticles for lysozyme detection

A molecularly imprinted biosensor for lysozyme based on the polymer nanoparticles self-assembled from water-soluble and electroactive poly (γ-glutamic acid) modified with 3-aminothiophene copolymer were prepared. The water-soluble copolymer made imprinting of lysozyme in aqueous solution possible and thus facilitated improvement of the activity of LYS. Subsequent electro-polymerization not only locked the recognition site between copolymer and lysozyme but also created a conductive polymer network, which can enhance the electron transfer rate and increase the conductivity of the film. The prepared molecularly imprinted biosensor exhibited a wide linear range from 1 × 10^-10 to 1 × 10^-5 mg mL^-1, and satisfactory selectivity, stability, repeatability for lysozyme detection.

Recent advances in the utilization of polyaniline in protein detection: a short review

Attachment of biomolecules to polyaniline.

Matrix-dispersed magnetic molecularly-imprinted polyaniline for the effective removal of chlorpyrifos pesticide from contaminated water

We report a new adsorbent nanocomposite material based on matrix-dispersed superparamagnetic iron oxide nanoparticles (SPIONs) in molecularly-imprinted polyaniline for the removal of chlorpyrifos (CPF), a hazardous organophosphate pesticide, from water. The synthesized magnetic molecularly-imprinted polymer (MMIP) was characterized by FTIR spectroscopy, XRD, magnetic susceptibility, DLS, zeta potential measurement, SEM and high-resolution TEM imaging. The average size of the naked SPIONs ranges from 15 to 30 nm according to the high-resolution TEM analysis. Moreover, the adsorption kinetics, thermodynamic parameters (ΔG, ΔH and ΔS), adsorption isotherms and rebinding conditions were investigated in detail. The proposed MMIP has an imprinting factor of 1.64. In addition, it showed a high experimental adsorption capacity of 1.77 mg g⁻¹ and a removal efficiency of nearly 80%. The fabricated MMIP material demonstrated excellent magnetic susceptibility allowing for easy separation using an external magnetic field. The adsorption mechanism of CPF onto the MMIP adsorbent followed the second-order kinetics model and fitted to the Temkin adsorption isotherm. By studying the adsorption thermodynamics, negative ΔG values (−1.955 kJ mol⁻¹ at room temperature) were obtained revealing that the adsorption process is spontaneous. Furthermore, the maximum adsorption capacity was obtained at room temperature (ca. 303 K), neutral pH and using a high CPF concentration.

An efficient magnetic molecularly-imprinted polymer adsorbent for removal of chlorpyrifos organophosphate pesticide from water is reported.

Preparation and characterization of 96-well microplates coated with molecularly imprinted polymer for determination and biosimilarity assessment of recombinant human erythropoietin

Synthesis and applications of molecularly imprinted polymers (MIP) are rapidly growing. In this study, a biomimetic MIP was prepared through silanes polymerization on the surface of 96-well microplates using recombinant human erythropoietin-alfa (rhEPO) as a template molecule. The rhEPO was immobilized onto the plate surface using bi-functional cross-linker and a thin imprinted layer following sol-gel procedure was constructed. After template extraction, uniform three-dimensional cavities compatible with the configuration of rhEPO were obtained. The rhEPO-MIP preparation was optimized using 2-level factorial design and response surface design where polymerization time and interactions between the different variable were found to be the most significant factors. Size-exclusion chromatography (SEC) was used to monitor the stability of the rhEPO under the investigated polymerization conditions. Determination of rhEPO using the MIP microplate showed good dynamic response fitting to the 4 PL regression model (0.9962) over a concentration range of 10.00 - 100.00 ng mL^-1. Adsorption of rhEPO onto MIP followed the Langmuir isotherm model (r = 0.9957, χ² =0.02786) with pseudo-second-order kinetics (r = 0.9984). The surface of the rhEPO-MIP was characterized using scanning electron microscopy (SEM) while step-by-step surface modification was tracked using Fourier transform infrared (FTIR) spectroscopy. The rhEPO-MIP was able to distinguish between the rhEPO-alfa template and modified rhEPO molecules; rhEPO-beta, hyperglycosylated and pegylated forms (imprinting factors < 2) and in the commonly used formulation additive human serum albumin (HSA) (R% = 113.96 -95.22%). The rhEPO-MIP was applied to compare the receptor-binding pattern to rhEPO and its biosimilars / structural analogues. The results were cross-validated using the conventional assay protocol (RP-HPLC and ELISA) and an acceptable correlation was observed with RP-HPLC (maximum deviation is 7.78%). This work confirmed the applicability of rhEPO-MIP with its unique binding features for batch release, stability and biosimilarity assessment as well as subsequent evaluation of batch-to-batch consistency during bioproduction of target analytes.

Perfluorooctanesulfonic Acid Detection Using Molecularly Imprinted Polyaniline on a Paper Substrate

Perfluorinated compounds like perfluorooctanesulfonic acid (PFOS) are synthetic water pollutants and have accumulated in environments for decades, causing a serious global health issue. Conventional assays rely on liquid chromatography and mass spectroscopy that are very expensive and complicated and thus limit the large-scale monitoring of PFOS in wastewater. To achieve low-cost and accurate detection of PFOS, we designed a paper-based sensor with molecularly imprinted polyaniline electrodes that have recognition sites specific to PFOS. The calibration curve of resistivity ratios as a function of PFOS concentrations has a linear range from 1 to 100 ppt with a coefficient of determination of 0.995. The estimated limit of detection is 1.02 ppt. We also investigated attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) spectra of the surface of the polyaniline (PANI) electrodes to propose the potential recognition sites in polyaniline matrix and the detection mechanism. This electrical paper sensor with low cost and excellent sensitivity and selectivity provides the potential for large-scale monitoring of wastewater.

A Low-Cost Paper Glucose Sensor with Molecularly Imprinted Polyaniline Electrode

For the hundreds of millions of worldwide diabetic patients, glucose test strips are the most important and commonly used tool for monitoring blood glucose levels. Commercial test strips use glucose oxidases as recognition agents, which increases the cost and reduces the durability of test strips. To lower the cost of glucose sensors, we developed a paper-based electrical sensor with molecularly imprinted glucose recognition sites and demonstrated the determination of various glucose concentrations in bovine blood solutions. The sensing electrode is integrated with molecular recognition sites in the conductive polymer. A calibration graph as a function of glucose concentration in aqueous solution was acquired and matched with a correlation coefficient of 0.989. We also demonstrated the determination of the added glucose concentrations ranging from 2.2 to 11.1 mM in bovine blood samples with a linear correlation coefficient of 0.984. This non-enzymatic glucose sensor has the potential to reduce the health care cost of test strips as well as make glucose sensor test strips more accessible to underserved communities.

Fluorescent nanosensor designing via hybrid of carbon dots and post-imprinted polymers for the detection of ovalbumin

We reported a facile strategy to assemble a ratiometric nanosensor for the ovalbumin (OVA) fluorescence determination and meanwhile it can be utilized for selective visual identification by naked eyes with fluorescent test papers under 365 nm UV lamp. The nanosensor was prepared through simply mixing blue color carbon dots (CDs) and green color core-shell imprinted polymers. Blue CDs were used directly as the internal reference without participating in the imprinting process and modified molecularly imprinted polymers (MIPs) were synthesized by post-imprinting, using fluorescein isothiocyanate (FITC) as fluorescence enhanced signal. Upon the addition of different concentrations of OVA, the fluorescence intensity of FITC was enhanced, while the fluorescence intensity of CDs was almost unchanged, leading to a detection limit as low as 15.4 nM. Accordingly, the fluorescence color was gradually changed from blue to dark olive green to green with naked eyes observation. Moreover, the ratiometric nanosensor was successfully applied to detect OVA in the human urine samples with satisfactory recoveries attaining of 92.0-104.0% with relative standard deviation (RSD) of 3.3-3.9% and 93.3-101.0% with RSDs of 2.7-3.8% for the spiked chicken egg white samples. This strategy reported here opens a novel pathway for biomacromolecule detection in real applications and can realize the visual observation on fluorescent test papers.

Redesigning an Electrochemical MIP Sensor for PFOS: Practicalities and Pitfalls

There is a growing interest in the technological transfer of highly performing electrochemical sensors within portable analytical devices for the in situ monitoring of environmental contaminants, such as perfluorooctanesulfonic acid (PFOS). In the redesign of biomimetic sensors, many parameters should be taken into account from the working conditions to the electrode surface roughness. A complete characterization of the surface modifiers can help to avoid time-consuming optimizations and better interpret the sensor responses. In the present study, a molecularly imprinted polymer electrochemical sensor (MIP) for PFOS optimized on gold disk electrodes was redesigned on commercial gold screen-printed electrodes. However, its performance investigated by differential pulse voltammetry was found to be poor. Before proceeding with further optimization, a morphological study of the bare and modified electrode surfaces was carried out by scanning electron microscopy–energy-dispersive X-ray spectrometry (SEM–EDS), atomic force microscopy (AFM) and profilometry revealing an heterogeneous distribution of the polymer strongly influenced by the electrode roughness. The high content of fluorine of the target-template molecule allowed to map the distribution of the molecularly imprinted polymer before the template removal and to define a characterization protocol. This case study shows the importance of a multi-analytical characterization approach and identify significant parameters to be considered in similar redesigning studies.

Substantially enhanced anaerobic reduction of nitrobenzene by biochar stabilized sulfide-modified nanoscale zero-valent iron: Process and mechanisms

Nanoscale zero-valent iron (nZVI), although being increasingly used in anaerobic systems for strengthening the removal of various refractory pollutants, is limited by various inherent drawbacks, such as easy precipitation, passivation, poor mass and electron transfer. To address the above issues, biochar stabilized sulfide-modified nZVI (S-nZVI@BC) was added into an up-flow anaerobic sludge blanket (UASB) to investigate the enhancement of anaerobic biodegradation of nitrobenzene (NB) and its impacts on microbial community structure. The results demonstrated that both NB reduction and aniline formation could be substantially facilitated in S-nZVI@BC coupled system compared to other anaerobic ones coupled with nZVI or S-nZVI. The dosage of S-nZVI@BC resulted in the formation of densely packed aggregates, evidently increased the extracellular polymeric substances content, promoted the volatile fatty acids transformation and stimulated the methane yield. Furthermore, species related to fermentation (Bacteroides and Longilinea), methanogenesis (Methanosarcina and Methanomethylovorans), electroactivity (Pelobacter, Thiobacillus and Phaselicystis) as well as reduction (Desulfovibrio) were considerably enriched in S-nZVI@BC coupled system. The activities of electron transport, total adenosine triphosphate, nitroreductase and NAD(P)H, which were closely related to microbial activity and NB transformation, were increased noticeably in S-nZVI@BC coupled anaerobic system. This study demonstrated the promising potential for long-term operation and full-scale application of S-nZVI@BC coupled system for the treatment of NB containing wastewater.

Electrochemical protein recognition based on macromolecular self-assembly of molecularly imprinted polymer: a new strategy to mimic antibody for label-free biosensing

A versatile strategy, based on the use of an amphiphilic copolymer as a macromonomer, was developed for the preparation of a fully synthetic MIP (molecularly imprinted polymer) sensor for protein recognition. A UV-crosslinkable copolymer poly(DMA-co-HEA-co-St) (UPDHS) was designed and synthesized to assemble with the template protein in aqueous solution, resulting in the fabrication of protein imprinted polymeric nanoparticles. Linear macromolecular chains were used to protect the structural integrity of the protein, through which a 3D structure was formed around the protein molecule to generate recognition cavities. Then the nanoparticles were immobilized on the cleaned surface of a transducer as an MIP sensing platform. The resultant MIP coating was then irradiated via ultraviolet light to ensure that the recognition cavities were stable after UV curing. After protein extraction, recognition cavities complementary to the protein molecule in shape, size and chemical functionality were formed in the platform, which could then selectively rebind to the template in a mixture of closely related compounds. The sensor exhibited satisfactory selectivity, a wide linear range from 10^-14 to 10^-9 mg mL^-1, and a comparatively lower detection limit for protein detection. This strategy offers a new and straightforward method for the synthesis of receptors for label-free and cost-efficient protein recognition. This is one of the most effective and versatile strategies for the preparation of high-performance protein recognition devices based on a fully synthetic MIP.

Necklace-like Molecularly Imprinted Nanohybrids Based on Polymeric Nanoparticles Decorated Multiwalled Carbon Nanotubes for Highly Sensitive and Selective Melamine Detection

In this study, molecularly imprinted nanohybrids with "necklace-like" nanostructures were developed based on self-assembled polymeric nanoparticles decorated multiwalled carbon nanotubes (MWCNTs) by employing melamine as template molecules. An amphiphilic copolymer poly(acrylic acid- co-(7-(4-vinylbenzyloxy)-4-methyl coumarin)- co-ethylhexyl acrylate) (poly(AA- co-VMc- co-EHA), PAVE) containing photosensitive coumarin units was synthesized first. Then, the PAVE copolymers were co-assembled with MWCNTs in the presence of template molecules, generating photosensitive molecularly imprinted nanohybrids (MIP-MWCNTs) with necklace-like structures. Subsequently, the MIP-MWCNTs nanohybrids were used to modify electrode surface followed by photo-polymerization of the coumarin units in the nanohybrids, leading to a network architectured complex film. After extracting melamine molecules by electrolysis, a melamine MIP sensor was successfully developed. The as-prepared sensor exhibited a significantly wide linear range (1.0 × 10^-12-1.0 × 10^-6 mol L^-1) and a low detection limit (5.6 × 10^-13 mol L^-1) for melamine detection. High selectivity of the sensor toward melamine was well demonstrated with respect to other melamine analogues and interferents. Furthermore, the MIP sensor showed high stability and reproducibility. The excellent performance of the MIP sensor can be attributed to the unique nanostructure of the complex film provided by these necklace-like nanohybrids. On the one hand, the nanosized polymeric MIP nanoparticles along the MWCNTs increase the effective electrode surface area and thus offer a high melamine-binding capacity. On the other hand, the MWCNTs in MIP-MWCNTs nanohybrids serve as "electronic bridges" to accelerate the electron transfer among the complex MIP film. More importantly, the MIP sensor was practically used to monitor melamine in milk samples, demonstrating a promising feature for applications in the analysis of food like milk and other food products including milk powder, infant formula, and animal feed. Considering the ease of polymeric nanoparticles functionalization, the necklace-like nanohybrids would be extended to wider applications in many other sensors and devices.