Time-resolution addressable photoelectrochemical strategy based on hollow-channel paper analytical devices

Integrating CdIn2S4 semiconductors with S-vacancy MoS2 nanosheets to fabricate a multi-channel aptasensing chip for photoelectrochemical detection of multiple mycotoxins

BACKGROUND

The importance of multi-target simultaneous detection lies in its ability to significantly boost detection efficiency, making it invaluable for rapid and cost-effective testing. Photoelectrochemical (PEC) sensors have emerged as promising candidates for detecting harmful substances and biomarkers, attributable to their unparalleled sensitivity, minimal background signal, cost-effectiveness, equipment simplicity, and outstanding repeatability. However, designing an effective multi-target detection strategy remains a challenging task in the PEC sensing field. Consequently, there is a pressing need to address the development of PEC sensors capable of simultaneously detecting multiple targets.

RESULTS

CdIn2S4/V-MoS2 heterojunctions were successfully prepared via a hydrothermal method. These heterojunctions exhibited a high photocurrent intensity, representing a 1.53-fold enhancement compared to CdIn2S4 alone. Next, we designed a multi-channel aptasensing chip using ITO as the substrate. Three working electrodes were created via laser etching and subsequently modified with CdIn2S4/V-MoS2 heterojunctions. Thiolated aptamers were then self-assembled onto the CdIn2S4/V-MoS2 heterojunctions via covalent bonds, serving as recognition tool. By empolying the CdIn2S4/V-MoS2 heterojunctions as the sensing platform and aptamers as recognition tool, we successfully developed a disposable aptasensing chip for the simultaneous PEC detection of three typical mycotoxins (aflatoxin B1 (AFB1), ochratoxin A (OTA), and zearalenone (ZEN)). This aptasensing chip exhibited wide detection range for AFB1 (0.05-50 ng/mL), OTA (0.05-500 ng/mL), and ZEN (0.1-250 ng/mL). Furthermore, it demonstrated ultra-low detection limits of 0.017 ng/mL for AFB1, 0.016 ng/mL for OTA, and 0.033 ng/mL for ZEN.

SIGNIFICANCE AND NOVELTY

The aptasensing chip stands out for its cost-effectiveness, simplicity of fabrication, and multi-channel capabilities. The versatility and practicality enable it to serve as a powerful platform for designing multi-channel PEC aptasensors. With its ability to detect multiple targets with high sensitivity and specificity, the aptasensing chip holds immense potential for applications across diverse fields, such as environmental monitoring, clinical diagnostics, and food safety monitoring, where multi-target detection is crucial.

A label-free photoelectrochemical biosensor for silver ions based on Zn-Co doped C and CdS QD nanomaterials

A sensitive photoelectrochemical (PEC) biosensor for silver ions (Ag+) was developed based on Zn-Co doped C and CdS quantum dot (CdS QD) nanomaterials. Hydrophobic modified sodium alginate (HMA), which could stabilize and improve the PEC performance of CdS QDs, was also used for the construction of PEC sensors. Especially, Zn-Co doped C, CdS QDs and HMA were sequentially modified onto an electrode surface via the drop-coating method, and a C base rich DNA strand was then immobilized onto the modified electrode. As the C base in DNA specifically recognized Ag+, it formed a C-Ag+-C complex in the presence of Ag+, which created a spatial steric hindrance, resulting in a reduced PEC response. The sensing platform is sensitive to Ag+ in the range of 10.0 fM to 0.10 μM, with a limit of detection of 3.99 fM. This work offers an ideal platform to determine trace heavy metal ions in environmental monitoring and bioanalysis.

Photoelectrochemical sensors based on paper and their emerging applications in point-of-care testing

Point-of-care testing (POCT) technology is urgently required owing to the prevalence of the Internet of Things and portable electronics. In light of the attractive properties of low background and high sensitivity caused by the complete separation of excitation source and detection signal, the paper-based photoelectrochemical (PEC) sensors, featured with fast in analysis, disposable and environmental-friendly have become one of the most promising strategies in POCT. Therefore, in this review, the latest advances and principal issues in the design and fabrication of portable paper-based PEC sensors for POCT are systematically discussed. Primarily, the flexible electronic devices that can be constructed by paper and the reasons why they can be used in PEC sensors are expounded. Afterwards, the photosensitive materials involved in paper-based PEC sensor and the signal amplification strategies are emphatically introduced. Subsequently, the application of paper-based PEC sensors in medical diagnosis, environmental monitoring and food safety are further discussed. Finally, the main opportunities and challenges of paper-based PEC sensing platforms for POCT are briefly summarized. It provides a distinct perspective for researchers to construct paper-based PEC sensors with portable and cost-effective, hoping to enlighten the fast development of POCT soon after, as well as benefit human society.

Trends in Paper-Based Sensing Devices for Clinical and Environmental Monitoring

Environmental toxic pollutants and pathogens that enter the ecosystem are major global issues. Detection of these toxic chemicals/pollutants and the diagnosis of a disease is a first step in efficiently controlling their contamination and spread, respectively. Various analytical techniques are available to detect and determine toxic chemicals/pathogens, including liquid chromatography, HPLC, mass spectroscopy, and enzyme-linked immunosorbent assays. However, these sensing strategies have some drawbacks such as tedious sample pretreatment and preparation, the requirement for skilled technicians, and dependence on large laboratory-based instruments. Alternatively, biosensors, especially paper-based sensors, could be used extensively and are a cost-effective alternative to conventional laboratory testing. They can improve accessibility to testing to identify chemicals and pollutants, especially in developing countries. Due to its low cost, abundance, easy disposal (by incineration, for example) and biocompatible nature, paper is considered a versatile material for the development of environmentally friendly electrochemical/optical (bio) sensor devices. This review presents an overview of sensing platforms constructed from paper, pointing out the main merits and demerits of paper-based sensing systems, their fabrication techniques, and the different optical/electrochemical detection techniques that they exploit.

Paper-based photoelectrochemical immunoassay for ultrasensitive screening of carcinoembryonic antigen on hollow CdS/CdMoO4-functionalized photoanode

Lab-based testing systems utilizing photoelectrochemical (PEC) biosensing methodologies for the ultrasensitive carcinoembryonic antigen (CEA) have been developed, although the majority have shown complicated operating procedures and dependence on precise apparatus. Herein, a portable photoelectrochemical split diagnostic platform based on a hollow CdS/CdMoO₄ (h-CdS@CdMoO₄) shell-shell structured photoanode system was developed for ultrasensitive detection of CEA. Using a small LED flashlight as the excitation light source and a digital multimeter (DMM) as the signal readout device, real-time CEA on a paper-based printed screen electrode developed in-house was quickly detected. The composite h-CdS@CdMoO₄ featured a special hollow shell-shell heterojunction structure that optimizes photon usage in the bulk phase on the one hand, and facilitates directed separation of the electrons and holes therein on the other. A split-sandwich immunoassay and detection antibodies for modified glucose oxidase were introduced into the paper-based photoanode test system, and the signals were displayed with a DMM to realize a point-of-care test for CEA. Under optimized conditions, the constructed portable PEC sensing system was sensitive to the target CEA from 0.02 to 50.0 ng mL^-1 with a detection limit of 11.3 pg mL^-1. Interferent experiments and stability test evaluations demonstrate the specificity and robustness of the constructed paper-based portable PEC sensor. The portable, paper-based PEC immunoassay system developed offers a fresh way of exploring affordable, approachable sensors to satisfy both the relevant community medical testing demands and hospital objectives for quick testing.

Hollow-Channel Paper Analytical Devices Supported Biofuel Cell-Based Self-Powered Molecularly Imprinted Polymer Sensor for Pesticide Detection

Herein, a paper-based glucose/air biofuel cell (BFC) was constructed and implemented for self-powered pesticide detection. Our developed paper-based chip relies on a hollow-channel to transport fluids rather than capillarity, which reduces analysis times as well as physical absorption. The gold nanoparticles (Au NPs) and carbon nanotubes (CNTs) were adapted to modify the paper fibers to fabricate the flexible conductive paper anode/cathode electrode (Au-PAE/CNT-PCE). Molecularly imprinted polymers (MIPs) using 2,4-dichlorophenoxyacetic acid (2,4-D) as a template were synthesized on Au-PAE for signal control. In the cathode, bilirubin oxidase (BOD) was used for the oxygen reduction reaction. Based on a competitive reaction between 2,4-D and glucose-oxidase-labeled 2,4-D (GOx-2,4-D), the amount of GOx immobilized on the bioanode can be simply tailored, thus a signal-off self-powered sensing platform was achieved for 2,4-D determination. Meanwhile, the coupling of the paper supercapacitor (PS) with the paper-based chip provides a simple route for signal amplification. Combined with a portable digital multi-meter detector, the amplified signal can be sensitively readout. Through rational design of the paper analytical device, the combination of BFC and PS provides a new prototype for constructing a low-cost, simple, portable, and sensitive self-powered biosensor lab-on-paper, which could be easily expanded in the field of clinical analysis and drug delivery.

Light-Addressable Electrochemical Sensors toward Spatially Resolved Biosensing and Imaging Applications

The light-addressable electrochemical sensor (LAES) is a recently emerged bioanalysis technique combining electrochemistry with the photoelectric effect in a semiconductor. In an LAES, a semiconductor substrate is illuminated locally to generate charge carriers in a well-defined area, thereby confining the electrochemical process to a target site. Benefiting from the unique light addressability, an LAES can not only detect multiple analytes in parallel within a single sensor plate but also act as a bio(chemical) imaging sensor to visualize the two-dimensional distribution of specific analytes. An LAES usually has three working modes: a potentiometric mode using light-addressable potentiometric sensors (LAPS) and an impedance mode using scanning photoinduced impedance microscopy (SPIM), while an amperometric mode refers to light-addressable electrochemistry (LAE) and photoelectrochemical (PEC) sensing. In this review, we describe the detection principles of each mode of LAESs and the concept of light addressability. In addition, we highlight the recent progress and advance of LAESs in spatial resolution, sensor system design, multiplexed detection, and bio(chemical) imaging applications. An outlook on current research challenges and future prospects is also presented.

Recent Advances of Nanostructured Materials for Photoelectrochemical Bioanalysis

Nowadays, the emerging photoelectrochemical (PEC) bioanalysis has drawn intensive interest due to its numerous merits. As one of its core elements, functional nanostructured materials play a crucial role during the construction of PEC biosensors, which can not only be employed as transducers but also act as signal probes. Although both chemical composition and morphology control of nanostructured materials contribute to the excellent analytical performance of PEC bioassay, surveys addressing nanostructures with different dimensionality have rarely been reported. In this review, according to classification based on dimensionality, zero-dimensional, one-dimensional, two-dimensional, and three-dimensional nanostructures used in PEC bioanalysis are evaluated, with an emphasis on the effect of morphology on the detection performances. Furthermore, using the illustration of recent works, related novel PEC biosensing patterns with promising applications are also discussed. Finally, the current challenges and some future perspectives in this field are addressed based on our opinions.

Chemiluminescence-Derived Self-Powered Photoelectrochemical Immunoassay for Detecting a Low-Abundance Disease-Related Protein

Early diagnosis of cancers relies on the sensitive detection of specific biomarkers, but most of the current testing methods are inaccessible to home healthcare due to cumbersome steps, prolonged testing time, and utilization of toxic and hazardous substances. Herein, we developed a portable self-powered photoelectrochemical (PEC) sensing platform for rapid detection of prostate-specific antigen (PSA, as a model disease-related protein) by integrating a self-powered photoelectric signal output system catalyzed with chemiluminescence-functionalized Au nanoparticles (AuNPs) and a phosphomolybdic acid (PMA)-based photochromic visualization platform. TiO2-g-C3N4-PMA photosensitive materials were first synthesized and functionalized on a sensor chip. The sensor consisted of filter paper modified with a photocatalytic material and a regional laser-etched FTO electrode as an alternative to a conventional PEC sensor with a glass-based electrode. The targeting system involved a monoclonal anti-PSA capture antibody-functionalized Fe3O4 magnetic bead (mAb1-MB) and a polyclonal anti-PSA antibody (pAb2)-N-(4-aminobutyl)-N-ethylisoluminol-AuNP (ABEI-AuNP). Based on the signal intensity of the chemiluminescent system, the photochromic device color changed from light yellow to heteropoly blue through the PMA photoelectric materials integrated into the electrode for visualization of the signal output. In addition, the electrical signal in the PEC system was amplified by a sandwich-type capacitor and readout on a handheld digital multimeter. Under optimum conditions, the sensor exhibited high sensitivity relative to PSA in the range of 0.01-50 ng mL-1 with a low detection limit of 6.25 pg mL-1. The flow-through chemiluminescence reactor with a semiautomatic injection device and magnetic separation was avoid of unstable light source intensity inherent in the chemiluminescence process. Therefore, our strategy provides a new horizon for point-of-care analysis and rapid cost-effective clinical diagnosis.

Ultrasensitive Photoelectrochemical Detection of MicroRNA on Paper by Combining a Cascade Nanozyme-Engineered Biocatalytic Precipitation Reaction and Target-Triggerable DNA Motor

Developing efficient strategies for sensitive detection of microRNAs, the noncoding bioactive molecules and well-established biomarkers, has aroused great interests due to its great potential values in genetic and pathological analyses. Herein, a highly selective and disposable paper-based photoelectrochemical (PEC) sensor was rationally designed for sensing microRNA based on simple self-assembly of a target-triggerable DNA motor and nanozyme-catalyzed multistage biocatalytic precipitation reaction. Specifically, a brand-new type II heterojunction of TiO₂-CeO₂ nanotubes decorated with carbon fiber paper (CFP) was first prepared, which gave an enhanced photoreactive surface and realized fast electron transport and extraction, markedly accelerating photoelectric conversion efficiency of the sensor. For achieving target detection, cascade nanozyme centers of the CeO₂ and Au nanoparticles modified by cyclodextrin were drafted, greatly decreasing the photocurrent intensity and achieving an ultralow background signal. With target introduction, the DNA motor was activated and automatically moved along the predesigned route driven by an endonuclease cleavage reaction, resulting in more substrate probe digestion and nanozyme release from CFP. Consequently, the repressive inner enhancement mechanism was gradually renewed with constant advancement of the enzymatic reaction and walker probe walking progressively, eventually allowing multiple enzymatic factor output in each target import. As a proof-of-concept application, the developed PEC sensor successfully performed detection of miRNA-141, showing a low detection limit of 0.6 fM, and was further applied to real sample bioassays with satisfying results. This work proposes promising strategies to boost the catalytic cascade DNA-motor adhibition in biological samples analysis and also exhibits potential capability in detection of other targets.

Paper-Supported Self-Powered System Based on a Glucose/O2 Biofuel Cell for Visual MicroRNA-21 Sensing

The exploitation of self-powered devices that get rid of the power source restriction represents the development tendency of sensing systems. Herein, a paper-supported glucose/O₂ biofuel cell (BFC)-based self-powered sensing platform for visual analysis was developed. The BFC device utilized gold nanoparticle-modified paper fibers as the electrode to wire glucose oxidase (GOx) and bilirubin oxidase for the fabrication of bioanodes and biocathodes. To implement an assay protocol, a target-responsive cargo release system based on mesoporous silica nanocarriers controlled by microRNA-21 (miRNA-21) was designed. During the BFC operation, undesired H₂O₂, the side product of glucose oxidation which would be deleterious for GOx, was generated, leading to inevitable degeneration of BFC performance. On the basis of the H₂O₂-mediated iodide oxidation reaction to form iodine that further modulated the starch chromogenic reaction, undesired H₂O₂ could be effectively removed, resulting in remarkably improved BFC performance as well as providing a means for visual signal readout. Thanks to the dual output signals (maximum power output density or length of blue bar), enhanced analysis reliability and sensitive detection of miRNA-21 over a range of 5 fM to 100 pM were achieved. Moreover, this study demonstrates a proof of concept in visualized BFC-based self-powered systems for sensing applications and provides a blueprint to advance future sensors and analysis devices powered by BFCs in a wide variety of in vitro applications.