Ti3C2/Cu2O heterostructure based signal-off photoelectrochemical sensor for high sensitivity detection of glucose

Ciprofloxacin Electrochemical Sensor Using Copper-Iron Mixed Metal Oxides Nanoparticles/Reduced Graphene Oxide Composite

The harmful effects of antibiotic proliferation on the environment and its persistent nature are urgent global problems. Ciprofloxacin (CIP) is a fluoroquinolone-class antibiotic agent used widely to treat pathogen-related diseases in humans and animals. Its excretion into surface water causes antibiotic resistance in microbes, resulting in difficult-to-treat or untreatable infectious diseases. This study developed a simple and efficient electrochemical sensor to detect CIP. Hydrothermal chemistry was utilized to synthesize an electrophotocatalytic composite of copper-iron mixed metal oxides (CIMMO) on reduced graphene oxide (rGO) (CIMMO/rGO). The composite was employed in an electrochemical sensor and exhibited outstanding performance in detecting CIP. The sensor was operated in differential pulse voltammetry (DPV) mode under light source illumination. The sensor yielded a linear response in the concentration range of 0.75 × 10-9-1.0 × 10-7 mol L-1 CIP and showed a limit of detection (LOD) of 4.74 × 10-10 mol L-1. The excellent sensing performance of the composite is attributable to the synergic effects between CIMMO nanoparticles and rGO, which facilitate photoinduced electron-hole separation and assist in the indirect electrochemical reactions/interactions with CIP.

Ultrastable N-Type Semiconducting Fiber Organic Electrochemical Transistors for Highly Sensitive Biosensors

Organic electrochemical transistors (OECTs) have attracted increasing attention due to their merits of high transconductance, low operating voltage, and good biocompatibility, ideal for biosensors. However, further advances in their practical applications face challenges of low n-type performance and poor stability. Here, it is demonstrated that wet-spinning the commercially available n-type conjugated polymer poly(benzimidazobenzophenanthroline) (BBL) into highly aligned and crystalline fibers enhances both OECT performance and stability. Although BBL is only soluble in high-boiling-point strong acids, it can be wet-spun into high-quality fibers with adjustable diameters. The BBL fiber OECTs exhibit a record-high area-normalized transconductance (gm,A) of 2.40 µS µm-2 and over 10 times higher figure-of-merit (µC*) than its thin-film counterparts. More importantly, these fiber OECTs exhibit remarkable stability with no noticeable performance attenuation after 1500 cycles over 4 h operation, outperforming all previously reported n-type OECTs. The superior performance and stability can be attributed to shorter π-π stacking distance and ordered molecular arrangement in the fibers, endowing the BBL fiber OECT-based biosensors with outstanding sensitivity while keeping a miniaturized form factor. This work demonstrates that, beyond new material development, developing new fabrication technology is also crucial for addressing the performance and stability issues in n-type OECTs.

Lung cancer cells detection by a photoelectrochemical MoS2 biosensing chip

This research aims to explore the potential application of this approach in the production of biosensor chips. The biosensor chip is utilized for the identification and examination of early-stage lung cancer cells. The findings of the optical microscope were corroborated by the field emission scanning electron microscopy, which provided further evidence that the growth of MoS2 is uniform and that there is minimal disruption in the electrode, hence minimizing the likelihood of an open circuit creation. Furthermore, the bilayer structure of the produced MoS2 has been validated through the utilization of Raman spectroscopy. A research investigation was undertaken to measure the photoelectric current generated by three various types of clinical samples containing lung cancer cells, specifically the CL1, NCI-H460, and NCI-H520 cell lines. The findings from the empirical analysis indicate that the coefficient of determination (R-Square) for the linear regression model was approximately 98%. Furthermore, the integration of a double-layer MoS2 film resulted in a significant improvement of 38% in the photocurrent, as observed in the device's performance.

CdSe/TiO2NTs Heterojunction-Based Nonenzymatic Photoelectrochemical Sensor for Glucose Detection

Compared with a single semiconductor, the heterojunction formed by two different semiconductors usually has higher light utilization and better photoelectric performance. By using stable TiO2 nanotubes as the main subject, CdSe/TiO2NTs heterojunctions were synthesized by a hydrothermal method. XRD, TEM, SEM, PL, UV-vis, and EIS were used to characterize the fabricated CdSe/TiO2NTs. Under visible light irradiation, CdSe/TiO2NTs heterojunctions exhibited a higher absorption intensity and lower degree of photogenerated carrier recombination than TiO2. The electrons and holes were proven to be effectively separated in this heterojunction via theoretical calculation. Under CdSe/TiO2NTs' optimal conditions, the glucose concentrations (10-90 μM) had a linear relationship with the photocurrent value, and the detection limit was 3.1 μM. Moreover, the CdSe/TiO2NTs sensor exhibited good selectivity and stability. Based on the experimental data and theoretical calculations, its PEC sensing mechanism was also illuminated.

PEC-SERS Dual-Mode Detection of Foodborne Pathogens Based on Binding-Induced DNA Walker and C3N4/MXene-Au NPs Accelerator

In this paper, a photoelectrochemical (PEC)-surface-enhanced Raman scattering (SERS) dual-mode biosensor is constructed coupled with a dual-recognition binding-induced DNA walker with a carbon nitride nanosheet (C3N4)/MXene-gold nanoparticles (C/M-Au NPs) accelerator, which is reliable and capable for sensitive and accurate detection of Staphylococcus aureus (S. aureus). Initially, a photoactive heterostructure is formed by combining C3N4 and MXene via a simple electrostatic self-assembly as they possess well-matched band-edge energy levels. Subsequently, in situ growth of gold nanoparticles on the formed surface results in better PEC performance and SERS activity, because of the synergistic effects of surface plasmon resonance and Schottky barrier. Furthermore, a three-dimensional, bipedal, and dual-recognition binding-induced DNA walker is introduced with the formation of Pb2+-dependent DNAzyme. In the presence of S. aureus, a significant quantity of intermediate DNA (I-DNA) is generated, which can open the hairpin structure of Methylene Blue-tagged hairpin DNA (H-MB) on the electrode surface, thereby enabling the switch of signals for the quantitative determination of S. aureus. The constructed PEC-SERS dual-mode biosensor that can be mutually verified under one reaction effectively addresses the problem of the low detection accuracy of traditional sensors. Experimental results revealed that the effective combination of PEC and SERS is achieved for amplification detection of S. aureus with a detection range of 5-108 CFU/mL (PEC) and 10-108 CFU/mL (SERS), and a detection of limit of 0.70 CFU/mL (PEC) and 1.35 CFU/mL (SERS), respectively. Therefore, this study offers a novel and effective dual-mode sensing strategy, which has important implications for bioanalysis and health monitoring.

Photoelectrochemical sensors based on paper and their emerging applications in point-of-care testing

Point-of-care testing (POCT) technology is urgently required owing to the prevalence of the Internet of Things and portable electronics. In light of the attractive properties of low background and high sensitivity caused by the complete separation of excitation source and detection signal, the paper-based photoelectrochemical (PEC) sensors, featured with fast in analysis, disposable and environmental-friendly have become one of the most promising strategies in POCT. Therefore, in this review, the latest advances and principal issues in the design and fabrication of portable paper-based PEC sensors for POCT are systematically discussed. Primarily, the flexible electronic devices that can be constructed by paper and the reasons why they can be used in PEC sensors are expounded. Afterwards, the photosensitive materials involved in paper-based PEC sensor and the signal amplification strategies are emphatically introduced. Subsequently, the application of paper-based PEC sensors in medical diagnosis, environmental monitoring and food safety are further discussed. Finally, the main opportunities and challenges of paper-based PEC sensing platforms for POCT are briefly summarized. It provides a distinct perspective for researchers to construct paper-based PEC sensors with portable and cost-effective, hoping to enlighten the fast development of POCT soon after, as well as benefit human society.

Electrochemical aptasensor based on gold nanoparticle decorated Ti3C2Tx nanocomposites for chloramphenicol detection

Using gold (Au) nanoparticle decorated Ti₃C₂T_x (Ti₃C₂T_x-Au) nanocomposites, a highly sensitive electrochemical aptasensor for the effective detection of chloramphenicol has been developed. As a two-dimensional layered material, the prepared composite not only provides high surface area, good conductivity, and thermal stability but also substantial binding sites for aptamers with high sensitivity and selectivity for the accurate determination of chloramphenicol. Interestingly, the conductivity and active sites were enhanced by freeze-drying Ti₃C₂T_x and in situ formation of Ti₃C₂T_x-Au nanocomposite. The fabricated aptasensor exhibited a very low detection limit (S/N ≥ 3) of 13.18 fg mL^-1 with a linear range of 1 ~ 700 pg mL^-1 and correlation coefficient of 0.9992. The fabricated aptasensor demonstrated an excellent reproducibility, repeatability, long-term stability, and high selectivity toward chloramphenicol. Further, the aptasensor was applied to real milk samples, and the recoveries were ranged from 98.93 to 101.93%.

In situ synthesis of label-free electrochemical aptasensor-based sandwich-like AuNPs/PPy/Ti3C2Tx for ultrasensitive detection of lead ions as hazardous pollutants in environmental fluids

The monitoring of hazardous pollutants in environmental fluids is one of main stretaegy in investigation of water and soil quality. Metal ions are one of main and dangerius materials in water sampels and one of the main causes of environmental problems. Therefore, many of environmental researchers focused on fabrication of highly sensitive sensor to ion hazardous pollutants environmental fluids. The encapsulation of 2D MXenes with other stable materials has proven to be an effective method for enhancing their stability and electrochemical properties. In this work, a sandwich-like nanocomposite structure, AuNPs/PPy/Ti₃C₂T_x, was designed and synthesized via a facile method of one-step layer-by-layer self-assembly. The morphology and structure of the prepared nanocomposites are characterized with various methods such as scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). Ti₃C₂T_x as a substrate played a significant role in the synthesis and alignment of PPy and AuNPs growth. The nanocomposites have maximized the benefits of the inorganic AuNPs and organic PPy materials, enhancing their stability and electrochemical performance. Meanwhile, AuNPs have given the nanocomposite the ability to form covalent bonds with biomaterials via the Au-S bond. Thus, a novel electrochemical aptasensor was developed based on AuNPs/PPy/Ti₃C₂T_x for the sensitive and selective detection of Pb²⁺. It demonstrated a wide linear range from 5 × 10^-14 to 1 × 10^-8 M with a low LOD of 1 × 10^-14 M (S/N = 3). Additionally, the developed aptasensor exhibited excellent selectivity and stability and successfully used to sensing of Pb²⁺ in environmental fluids such as NongFu Spring and tap water.

Multifunctional Photoelectrochemical Biosensor Based on ZnIn2S4/ZnS QDs@Au-Ag-Reversed Photocurrent of Cu-Metal-Organic Framework Coupled with CRISPR/Cas-12a-Shearing for Assay of Dual Targets

False positives and negatives in bioanalytical assays remain a persistent problem. Herein, a multifunctional photoelectrochemical (PEC) biosensor based on ZnIn₂S₄ (ZIS)/ZnS quantum dots (QDs)@Au-Ag-reversed photocurrent of Cu-metal-organic framework (MOF) coupled with CRISPR/Cas-12a-shearing was innovatively developed for assay of dual targets. First, Cu-MOF as a good PEC material shows cathodic photocurrent. Then, numerous ZIS/ZnS QDs were assembled to the Au-Ag nanoparticles (NPs) to prepare a stable and highly amplified signal probe, which can just match the energy level of Cu-MOFs and realized the polarity-reversed photocurrent of Cu-MOF for the first time. As the empty-core nanostructure of Au-Ag NPs has a high specific surface area and low material density, the bimetallic nanocrystal can much increase the reaction rate and improve the redox efficiency. When target CEA-produced cDNA opened the hairpin DNA (HP1 DNA) on the electrode, the ZIS/ZnS QDs@Au-Ag signal probe was conjugated to the electrode via DNA hybridization, achieving a significantly reversed PEC current for CEA detection. Moreover, the specific binding of kanamycin/aptamer generated the acDNA (activator), which can activate the trans-cleavage activity of the CRISPR-CAS12a system on ssDNA, so the signal probe was sheared and caused the obvious decrease of PEC signal for kanamycin detection. The newly developed ZIS/ZnS QDs@Au-Ag NPs displayed excellent PEC properties and reversed photocurrent to MOF and were combined with the unique CRISPR-Cas12a system to achieve sensitive detection of dual targets, which can open a new polarity-reversed PEC sensing platform for rapid and accurate analysis of multiple targets and can effectively avoid false positives results in clinical testing.

MOF/COF heterostructure hybrid composite-based molecularly imprinted photoelectrochemical sensing platform for determination of dibutyl phthalate: A further expansion for MOF/COF application

A novel metal-organic framework (MOF)/covalent-organic framework (COF) heterostructure hybrid composite (NH₂-UiO-66/TpPa-1-COF) with excellent photoactivity was developed, which further acted as the photoelectrochemical sensitized layer of a molecularly imprinted photoelectrochemical (MIP-PEC) sensor for extremely sensitive and selective determination of dibutyl phthalate (DBP). The NH₂-UiO-66/TpPa-1-COF was synthesized using a simple one-step solvothermal method, which showed improved photocurrent response owing to heterojunction formation, favorable energy-band configuration and strong light absorption capacity. To improve the sensing performance, molecularly imprinted polymer (MIP) was developed by sol-gel polymerization method as the recognition component of PEC sensor. The specific binding of imprinting sites towards DBP could block the electron transfer, causing decreased photocurrent response of the MIP-PEC sensor. The MIP-PEC sensor showed a wide detection range from 0.1 nmol L^-1 to 100 μmol L^-1 with a limit of detection of 3.0 × 10^-11 mol L^-1 under optimal conditions. Meanwhile, the proposed MIP-PEC sensor showed good stability, selectivity, reproducibility, and applicability in real samples. This is the first attempt to apply MOF/COF heterostructure hybrid composite for MIP-PEC sensor construction, providing new insight into the potential applications of microporous crystalline framework heterostructure hybrid composite in the sensing field.

A light-driven photoelectrochemical sensor for highly selective detection of hydroquinone based on type-II heterojunction formed by carbon nanotubes immobilized in 3D honeycomb CdS/SnS2

The ecological environment and public safety are seriously threatened by the typical phenolic contaminant hydroquinone (HQ). Here, using a straightforward physical mixing technique, we created an n-n heterojunction by uniformly immobilizing cadmium sulfide (CdS) nanoparticles on the surface of a three-dimensionally layered, flower-like structure made of tin sulfide (SnS₂). Then, as photosensitizers, carbon nanotubes (CNTs) were added to the CdS/SnS₂ complex to create a type-II heterostructure of CdS/SnS₂/CNTs with synergistic effects. Subsequently, the detector HQ was bound to the modified photoelectrodes, which was accompanied by the hole oxidation of the bound HQ, leading to a significant increase in the photocurrent signal, thus allowing specific and sensitive detection of HQ. Under optimized detection conditions, the proposed photoelectrochemical sensor shows a wide detection range of 0.2 to 100 μM for HQ with a detection limit as low as 0.1 μM. The high accuracy of the sensor was demonstrated by comparison with the detection results of UV-vis spectrophotometry. In addition, the photoelectrochemical sensor exhibits good reproducibility, stability, selectivity, and specificity, providing a light-driven method to detect HQ.

Recent advances in 2D metal carbides and nitrides (MXenes): synthesis and biological application

As a new two-dimensional (2D) material, transition metal carbides and nitrides (MXenes) have attracted much attention because of their excellent physical and chemical properties. In recent years, MXenes have been widely applied in the biological field due to their high biocompatibility, abundant surface groups, good conductivity, and photothermal properties. Here, the main synthesis methods of MXenes and the analysis of the advantages and disadvantages of each method are presented in detail. Then, the latest developments of MXenes in the biological field, including biosensing, antibacterial activity, reactive oxygen species (ROS) and free radical scavenging, tissue repair and antitumor therapy are comprehensively reviewed. Finally, the current challenges and future development trends of MXenes in biological applications are discussed.

New Horizons for MXenes in Biosensing Applications

Over the last few decades, biosensors have made significant advances in detecting non-invasive biomarkers of disease-related body fluid substances with high sensitivity, high accuracy, low cost and ease in operation. Among various two-dimensional (2D) materials, MXenes have attracted widespread interest due to their unique surface properties, as well as mechanical, optical, electrical and biocompatible properties, and have been applied in various fields, particularly in the preparation of biosensors, which play a critical role. Here, we systematically introduce the application of MXenes in electrochemical, optical and other bioanalytical methods in recent years. Finally, we summarise and discuss problems in the field of biosensing and possible future directions of MXenes. We hope to provide an outlook on MXenes applications in biosensing and to stimulate broader interests and research in MXenes across different disciplines.

Ternary heterostructures of 1D/2D/2D CuCo2S4/CuS/Ti3C2 MXene: Boosted amperometric sensing for chlorpyrifos

Multicomponent heterogeneous Ti₃C₂ transition metal carbide (MXene)-based materials are receiving extensive research attention due to their interesting synergistic interactions and catalytic properties. However, the morphology-controllable synthesis of heterostructures as structural stabilizers for Ti₃C₂ MXene remains a challenge owing the complicated synthesis procedure. In this work, a kind of ternary heterogeneous nanomaterials CuCo₂S₄/CuS/Ti₃C₂ MXene with a nanorod/nanoplate/nanosheet hybrid architecture is constructed through a one-step low-temperature solvothermal method. The well-designed ternary one-dimensional (1D)/two-dimensional (2D)/2D CuCo₂S₄/CuS/Ti₃C₂ MXene heteromaterials exhibit synergistic improvements in substrate-catalyzed reactions for electrochemical acetylcholinesterase (AChE) biosensor. The Michaelis-Menten constant for the Nafion/AChE/CuCo₂S₄/CuS/Ti₃C₂ MXene/GCE biosensor is 228 μM, which is smaller than ones reported in previous literatures, indicating a higher affinity of the fabricated enzyme biosensor to acetylthiocholine chloride. The biosensor exhibits a well linear relationship with chlorpyrifos concentration ranging from 2.852 × 10^-12 M to 2.852 × 10^-6 M. The multicomponent 1D/2D/2D CuCo₂S₄/CuS/Ti₃C₂ MXene heteromaterial may shine a light in more electrochemical applications.

Ultrafine Silver Nanoparticle Encapsulated Porous Molecular Traps for Discriminative Photoelectrochemical Detection of Mustard Gas Simulants by Synergistic Size-Exclusion and Site-Specific Recognition

The rapid, discriminative, and portable detection of highly toxic chemical warfare agents is extremely important for response to public security emergencies but remains a challenge. One plausible solution involves the integration of porous molecular traps onto a photoelectrochemical (PEC) sensor. Here, a fast and facile protocol is developed to fabricate sub-1 nm AgNPs encapsulated hydrogen-bonded organic framework (HOF) nanocomposite materials through an in situ photoreduction and subsequent encapsulation process. Compared to traditional semiconductors and selected metal-organic frameworks (MOF) materials, these AgNPs@HOFs show significantly enhanced photocurrent. Most importantly, the portable PEC device based on AgNPs@HOF-101 can selectively recognize 13 different mustard gas simulants, including 2-chloroethyl ethyl sulfide (CEES), based on synergistic size-exclusion and specific recognition. The extremely low detection limit for CEES (15.8 nmol L^-1 ), reusability (at least 30 cycles), and long-term working stability (at least 30 d) of the portable PEC device warrant its use as a chemical warfare agents (CWAs) sensor in practical field settings. More broadly, this work indicates that integrating porous molecular traps onto PEC sensors offers a promising strategy to further develop portable devices for CWAs detection with both ultrahigh sensitivity and selectivity.

Recent Developments and Future Perspective on Electrochemical Glucose Sensors Based on 2D Materials

Diabetes is a health disorder that necessitates constant blood glucose monitoring. The industry is always interested in creating novel glucose sensor devices because of the great demand for low-cost, quick, and precise means of monitoring blood glucose levels. Electrochemical glucose sensors, among others, have been developed and are now frequently used in clinical research. Nonetheless, despite the substantial obstacles, these electrochemical glucose sensors face numerous challenges. Because of their excellent stability, vast surface area, and low cost, various types of 2D materials have been employed to produce enzymatic and nonenzymatic glucose sensing applications. This review article looks at both enzymatic and nonenzymatic glucose sensors made from 2D materials. On the other hand, we concentrated on discussing the complexities of many significant papers addressing the construction of sensors and the usage of prepared sensors so that readers might grasp the concepts underlying such devices and related detection strategies. We also discuss several tuning approaches for improving electrochemical glucose sensor performance, as well as current breakthroughs and future plans in wearable and flexible electrochemical glucose sensors based on 2D materials as well as photoelectrochemical sensors.

A microfluidic cloth-based photoelectrochemical analytical device for the detection of glucose in saliva

Photoelectrochemical (PEC) detection is a widely used detection method that uses light to stimulate and photocurrent signals to detect the target. Due to the disengagement of the excitation unit and the detection unit, the PEC background signal is reduced, and the detection sensitivity is improved. In this work, we report the first demonstration of PEC detection for microfluidic cloth-based analytical devices (μCADs). Using PEC μCADs integrated with cadmium sulfide quantum dots (CdS QDs) and multiwalled carbon nanotubes (MWCNTs), the nonenzymatic, sensitive and rapid measurement of glucose in saliva has been achieved. For the cloth-based device, the PEC reaction zone and cloth-based electrodes can be fabricated by inexpensive wax-based and carbon ink-based screen-printing, respectively. By the layer-by-layer method, the as-prepared poly (dimethyl diadly ammonium chloride-functionalized) MWCNTs (PDDA-MWCNTs) and CdS QDs are successively adsorbed onto the working electrode surface of the cloth-based device. In the presence of an excitation source and glucose, the CdS QDs generate a strong oxidizing electron hole that can then continuously oxidize glucose to produce an electrical signal for glucose detection. Under optimized conditions, a linear dependence is obtained between the PEC signal and glucose concentrations in the range of 0.05-1000 μM with a detection limit of 15.99 nM. In the detection range, the cloth-based device also shows acceptable selectivity, reproducibility, and long-term stability. Moreover, the method has been implemented for the detection of glucose in real saliva samples, suggesting good potential for biochemical applications.

Recent Trends in Synthesis and Applications of porous MXene Assemblies: A Topical Review

MXene possesses high conductivity, excellent hydrophilicity, rich surface chemistry, hence holds great potential in various applications. However, MXene materials have low surface area utilization due to the agglomeration of ultrathin nanosheets. Assembling 2D MXene nanosheets into 3D multi-level architectures is an effective way to circumvent this issue. Incorporation of MXene with other nanomaterials during the assembly process could rationally tune and tailor the specific surface area, porosity and surface chemistry of the MXene assemblies. The complementary and synergistic effect between MXene and nanomaterials could expand their advantages and make up for their disadvantages, thus boost the performance of 3D porous MXene composites. Herein, we summarize the recent progress in fabrication of porous MXene architectures from 2D to 3D, and also discuss the potential applications of MXene nanostructures in energy harvesting systems, sensing, electromagnetic interference shielding, water purification and photocatalysis.

Grain boundary enriched CuO nanobundle for efficient non-invasive glucose sensors/fuel cells

Glucose oxidation reaction (GOR) plays a significant role in glucose fuel cells anode and glucose sensors. Therefore, optimizing the GOR catalyst nanostructure is auxiliary to their efficient operation. In this study, we present a cascade-assembled strategy to prepare CuO nanobundles (CuO-NB) with high-density and homogenous grainboundaries (GBs). The essence of activity in GOR that depended on GBs are thoroughly investigated. The increased glucose diffusion coefficient of CuO-NB means that GBs has a faster glucose mass transfer, which is attributed to the terraces in GBs dislocation surface. Furthermore, the accumulation of electrons on GBs makes the glucose adsorption increased and the free energy of dehydrogenation step decreased, leading to a lower glucose oxidation barrier. Therefore, CuO-NB is appropriate for non-invasive glucose detection and glucose fuel cells. This study sheds new light on the GBs effect in GOR and paves the way for developing high-efficiency electrocatalysts.

ZnSe nanodisks:Ti3C2 MXenes-modified electrode for nucleic acid liquid biopsy with photoelectrochemical strategy

ZnSe nanodisks:Ti₃C₂ MXene complex was prepared for the first time. Based on its remarkable photoelectrochemical performance, combined with the enzyme-free toehold-mediated strand displacement reaction, a photoelectrochemical biosensor for the detection of the non-small-cell cancer biomarker ctDNA KRAS G12D was developed. ZnSe nanodisks were in situ grown on Ti₃C₂ MXene surface by two-step hydrothermal method. The high conductivity and adjustable band gap of MXene significantly enhanced the photoelectric response of ZnSe. Subsequently, the photoelectrochemical biosensor was prepared by combining with the signal amplification function of p-aminophenol and the enzyme-free toehold-mediated strand displacement reaction on the modified ITO electrode surface. Under the optimized conditions, the linear detection range is 0.5 ~ 100.0 fM, and the detection limit is 0.2 fM, which realizes the sensitive detection of KRAS G12D. The photoelectrochemical biosensor constructed opens up a new pathway for the preparation of new Mxene-based composite materials and the research of photoelectrochemical biosensor. Nucleic acid liquid biopsy with ZnSe nanodisks:Ti₃C₂ MXene photoelectroactive modified electrode.

Electrochemical and optical biosensors based on multifunctional MXene nanoplatforms: Progress and prospects

Two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides (MXene) have emerged as a rising family of atomic layered nanomaterials which undergoes intensive investigations in interdisciplinary applications. The large surface-to-volume ratio, excellent mechanical strength, desirable biocompatibility, along with tunable electronic and optical properties, render 2D MXenes exceptional attractive as versatile nanoplatforms for biosensing. Herein, advanced progress and novel paradigms of MXene-based biosensors are reviewed, focusing on the combination of MXenes with various detection techniques that promotes target recognition and signal transducing. Regarding the nature of transducing signals, MXene-based biosensors are categorized into two groups where MXenes serve as electrical platforms or optical platforms, respectively. The merits of MXenes are critically compared with other 2D materials to illustrate the distinctive advantages of MXenes in biosensing, while challenges such as environmental vulnerability was discussed to guide the sensor design. Facing with the rapid development of wearable electronics and internet of medical things, as well as escalating demanding in precision medicine, perspectives are provided to elucidate the potential of MXenes in propelling advances in these trending biomedical applications.

Two-dimensional Ti3C2 MXene-based nanostructures for emerging optoelectronic applications

Since the first discovery of Ti₃C₂ in 2011, two-dimensional (2D) transition-metal carbides, carbonitrides and nitrides, known as MXenes, have attracted significant attention. Due to their outstanding electronic, optical, mechanical, and thermal properties, versatile structures and surface chemistries, Ti₃C₂ MXenes have emerged as new candidates with great potential for applications in optoelectronic devices, such as photovoltaics, photodetectors and photoelectrochemical devices. The excellent metallic conductivity, high anisotropic carrier mobility, good structural and chemical stabilities, high optical transmittance, excellent mechanical strength, tunable work functions, and wide range of optical absorption properties of Ti₃C₂ MXene nanostructures are the key to their success in a number of electronic and photonic device applications. Herein, we summarize the fundamental properties and preparation of pure Ti₃C₂ MXenes, functionalized Ti₃C₂ MXenes and their hybrid nanocomposites, as well as their optoelectronic applications. In the end, the perspective and current challenges of Ti₃C₂ MXenes toward the development of advanced MXene-based nanostructures are briefly discussed for future optoelectronic applications.

High-sensitivity photo-electrochemical heterostructure of the cuprous oxide-metal organic framework for a dioctyl phthalate molecularly imprinted sensor

This work designed a novel dioctyl phthalate (DOP) photoelectrochemical (PEC) sensor based on a molecularly imprinted polymer (MIP) modified Cu₃(BTC)₂@Cu₂O heterostructure. In this work, a metal organic framework (MOF), Cu₃(BTC)₂, was coated on Cu₂O through a simple immersion method to form a Cu₃(BTC)₂@Cu₂O heterostructure. The heterostructure exhibited strong light adsorption ability, good stability and enhanced photocurrent under visible light irradiation. Using the Cu₃(BTC)₂@Cu₂O heterostructure as the photoelectric converter, a PEC sensor was constructed by imprinting DOP on the heterostructure. Under the optimal experimental conditions, the PEC sensor showed a wide linear range from 25.0 pM-0.1 μM and a low detection limit of 9.15 pM. This method with good sensitivity, stability, selectivity and reproducibility in actual sample analyses showed promising applications of the MOF-based heterostructure in photoelectrochemical analysis fields.

1D/2D constructed Bi2S3/Bi2O2CO3 direct Z-Scheme heterojunction: A versatile photocatalytic material for boosted photodegradation, photoreduction and photoelectrochemical detection of water-based contaminants

In this work, two-dimensional Bi₂O₂CO₃ disk is synthesized, followed by the growth of Bi₂S₃ over Bi₂O₂CO₃ via topotactic transformation by controlling the amount of thiourea under hydrothermal conditions. The synthesized composite catalyst is investigated for photocatalytic oxidation and reduction of tetracycline hydrochloride and hexavalent chromium under visible light irradiation. High interfacial contact between the Bi₂O₂CO₃ disk0 and Bi₂S₃ fiber is confirmed via high-resolution microscopic imaging. Enhanced light absorption and increased charge carrier separation is observed after the formation of the Bi₂S₃/Bi₂O₂CO₃ composite. The Bi₂S₃/Bi₂O₂CO₃ composite grown using 1 mmol of thiourea shows approximately 98% degradation of tetracycline hydrochloride after 120 min and 99% Cr(VI) reduction after 90 min of photochemical reaction under visible light irradiation. The charge separation is due to the formed internal electric field at the interface, which upon light irradiation follows a z-scheme charge transfer hindering the recombination at the Bi₂S₃ and Bi₂O₂CO₃ interface, thereby contributing efficiently to the photochemical process. In addition, the mechanism of the photochemical reaction for the degradation of pollutants is supported using quencher and probe experiments. Furthermore, photoelectrochemical detection of antibiotic in aqueous solution is conducted to understand the sensing feasibility of the synthesized system.

Low dimensional materials for glucose sensing

Biosensors are essential components for effective healthcare management. Since biological processes occur on molecular scales, nanomaterials and nanosensors intrinsically provide the most appropriate landscapes for developing biosensors. Low-dimensional materials have the advantage of offering high surface areas, increased reactivity and unique physicochemical properties for efficient and selective biosensing. So far, nanomaterials and nanodevices have offered significant prospects for glucose sensing. Targeted glucose biosensing using such low-dimensional materials enables much more effective monitoring of blood glucose levels, thus providing significantly better predictive diabetes diagnostics and management. In this review, recent advances in using low dimensional materials for sensing glucose are summarized. Sensing fundamentals are discussed, as well as invasive, minimally-invasive and non-invasive sensing methods. The effects of morphological characteristics and size-dependent properties of low dimensional materials are explored for glucose sensing, and the key performance parameters such as selectivity, stability and sensitivity are also discussed. Finally, the challenges and future opportunities that low dimensional materials can offer for glucose sensing are outlined.

High rate fabrication of copper and copper-gold electrodes by laser-induced selective electroless plating for enzyme-free glucose sensing

In the current study, the method of Selective Surface Activation Induced by Laser (SSAIL) was used for the fabrication of metallic and bimetallic structures based on copper and gold on the surface of glass and glass-ceramics. It was shown that the fabricated electrodes are suitable for non-enzymatic detection of biologically essential analytes such as glucose. The implemented approach allows performing high-rate metallization of various dielectrics. Voltammetric methods were applied to evaluate the electrocatalytic activity of the obtained structures, which were used as working electrodes. The most promising results were revealed by copper–gold electrode structures manufactured on glass-ceramics. For these structures, sensitivity towards glucose sensing was 3060 μA mM⁻¹ cm⁻². The linear range of glucose detection varied between 0.3 and 1000 μM. Besides, the manufactured electrodes exhibited high selectivity and long-term stability.

In the current study, the method of Selective Surface Activation Induced by Laser (SSAIL) was used for the fabrication of metallic and bimetallic structures based on copper and gold on the surface of glass and glass-ceramics.

A photoelectrochemical sensor based on Z-Scheme TiO2@Au@CdS and molecularly imprinted polymer for uric acid detection

A novel photoelectrochemical (PEC) sensor based on "Z-scheme" TiO₂@Au@CdS and molecularly imprinted polymer (MIP) was developed for the non-invasive detection of uric acid (UA). The "Z-scheme" material, consisting of an electron-transfer system (Au) and two isolated photochemical systems (CdS, TiO₂), was synthesized by chemical deposition method and it worked as a substrate for electro-polymerization of MIP. Due to the high photoelectric conversion efficiency provided by TiO₂@Au@CdS and specific imprinting effect afforded by MIP, the sensor displayed desirable sensing performance with the merits of sensitivity, selectivity, repeatability, and stability. The linear range for UA detection is from 1 nM to 9 μM with the detection limit of 0.3 nM (S/N = 3). Moreover, the assay was successfully utilized to measure UA in human tears and offered a reliable result. The incorporation of MIP and "Z-scheme" material into a PEC sensor system is expected to provide a promising strategy for detecting other small molecules.

Simultaneous Recognition of Dopamine and Uric Acid in the Presence of Ascorbic Acid via an Intercalated MXene/PPy Nanocomposite

Two-dimensional (2D) MXenes have shown a great potential for chemical sensing due to their electric properties. In this work, a Ti₃C₂T_x/polypyrrole (MXene/PPy) nanocomposite has been synthesized and immobilized into a glassy carbon electrode to enable the simultaneous recognition of dopamine (DA) and uric acid (UA) under the interference of ascorbic acid (AA). The multilayer Ti₃C₂T_x MXene was prepared via the aqueous acid etching method and delaminated to a single layer nanosheet, benefiting the in-situ growth of PPy nanowires. The controllable preparation strategy and the compounding of PPy material remain great challenges for further practical application. A facile chemical oxidation method was proposed to regulate magnitude and density during the forming process of PPy nanowire, which promotes the conductivity and the electrochemical active site of this as-prepared nanomaterial. The MXene/PPy nanocomposite-modified electrode exhibited the selective determination of DA and UA in the presence of a high concentration of AA, as well as a wide linear range (DA: 12.5–125 μM, UA: 50–500 μM) and a low detection limit (DA: 0.37 μM, UA: 0.15 μM). More importantly, the simultaneous sensing for the co-existence of DA and UA was successfully achieved via the as-prepared sensor.

Electrochemical dual signal sensing platform for the simultaneous determination of dopamine, uric acid and glucose based on copper and cerium bimetallic carbon nanocomposites

A highly sensitive electrochemical sensor for the simultaneous dual signal determination of dopamine (DA), uric acid (UA) and glucose (Glu) has been obtained using nanocomposites based on the copper and cerium bimetallic nanoparticles and carbon nanomaterials of graphene and single-walled carbon nanotubes in the presence of Tween 20 (GR-SWCNT-Ce-Cu-Tween 20) modified glassy carbon electrode. The surface morphology of the nanocomposites was characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD), and the electrochemical behavior of the sensor was investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) with potassium ferricyanide as probe. In the coexistence system of DA, UA and Glu, three clear and well-isolated voltammetric peaks were obtained by CV and differential pulse voltammetry (DPV), and oxidation peak currents of DA and UA are positively correlated with their concentrations respectively, while the peak current of Glu is negatively correlated with its concentration. Linearity was obtained in the ranges of 0.1-100 µM for dopamine, 0.08-100 µM for uric acid and 1-1000 µM for glucose with DPV, and the detection limits (S/N = 3) of 0.0072 µM, 0.0063 µM, and 0.095 µM for DA, UA and Glu, respectively. The method was successfully applied to the determination of DA, UA and Glu in blood serum samples, which provided a reference for further sensor research.

Enhanced electrochemiluminescence of luminol based on Cu2O-Au heterostructure enabled multiple-amplification strategy

Herein, a credible construction strategy to improve electrochemiluminescence (ECL) of luminol was developed based on Cu₂O-Au heterostructures. Summarily, gold nanoparticles (AuNPs) were anchored on surface of Cu₂O nanocube (Cu₂O@AuNPs) by spontaneous reduction reaction. Then, luminol molecules were concentrated on Cu₂O@AuNPs using L-Cysteine (Cys) as covalent linkage to build the composite emitter (Cu₂O@AuNPs-Cys-luminol). The enhancement mechanism was realized by following aspects: (I) Cu₂O@AuNPs worked as electrocatalyst for glucose to generate coreactant of H₂O₂ in situ, avoiding the instability of direct addition of H₂O₂. (II) luminol molecules were firmly attached on Cu₂O@AuNPs to achieve centralized and strong luminescence at low consumption. (III) Cys acted as an intramolecular coreactant and directly linked to luminol to increase luminous efficiency. To validate the effectiveness, a sandwiched immunoassay was built using concanavalinA (ConA) as analyte. Electroreduced graphene film as substrate provided phenoxy-derivatized dextran (DexP) with abundant binding sites and improved conductivity. To improve the specificity, DexP was used to identify ConA via the specific carbohydrate-ConA interaction. Then, Cu₂O@AuNPs-Cys-luminol was modified on electrode as ECL signal indicator. The ECL immunosensor achieved determination of ConA with low detection limit of 2.9 × 10^-5 ng/mL and excellent stability of continuous potential scan for 8 cycles. Experimental results demonstrated that the proposed construction strategy made considerable progress in ECL efficiency and stability of luminol. The creational pattern of construction strategy achieves high detection capabilities to ConA and expands the applicability of luminol in ECL system. It is expected to have more potential application value in immunoassay with universality.

Boosting glucose oxidation by constructing Cu–Cu2O heterostructures

An octahedral Cu–Cu₂O heterostructure with loose and porous structure was fabricated and exhibits enhanced electrocatalytic activity towards glucose oxidation.