Enhanced electrochemiluminescence of luminol based on Cu2O-Au heterostructure enabled multiple-amplification strategy

NiCo-LDH Hollow Nanocage Oxygen Evolution Reaction Promotes Luminol Electrochemiluminescence

Conventional luminol co-reactant electrochemiluminescence (ECL) systems suffer from low stability and accuracy due to factors such as the ease of decomposition of hydrogen peroxide and inefficient generation of reactive oxygen species (ROS) from dissolved oxygen. Inspired by the luminol ECL mechanism mediated by oxygen evolution reaction (OER), the nickel-cobalt layered double hydroxide (NiCo-LDH) hollow nanocages with hollow structure and defect state are used as co-reaction promoters to enhance the ECL emission from the luminol-H2 O system. Thanks to the hollow structure and defect state, NiCo-LDH hollow nanocages show excellent OER catalytic activity, which can stabilize and efficiently produce ROS and enhance the ECL emission. Additionally, mechanistic exploration suggests that the ROS involved in the co-reaction of the luminol-H2 O system are derived from the OER reaction process, and there is a positive correlation between ECL intensity and the OER catalytic activity of the co-reaction promoter. The selection of catalysts with excellent OER catalytic activity is a key factor in improving ECL emission. Finally, a dual-mode immunosensor is constructed for the detection and analysis of alpha-fetoprotein (AFP) based on the promoting effect of NiCo-LDH hollow nanocages on the luminol-H2 O ECL system.

A novel electrochemical aptasensor based on core-shell nanomaterial labeling for simultaneous detection of acetamiprid and malathion

At present, due to the coexistence of multiple pesticides in vegetables and the enhanced toxicity, a simultaneous detection method for multiple pesticides is urgently needed. In this work, two types of core-shell nanomaterials, Ag-Au core-shell nanoparticles (Ag@Au NPs) and Cu2O-Au core-shell nanoparticles (Cu2O@Au NPs), were synthesized and labeled with acetamiprid aptamer and malathion aptamer to prepare two novel electroactive signal probes, respectively. The two probes were hybridized on the surface of the electrode by the principle of base complementary pairing between the aptamers and the thiolated DNA oligonucleotide sequences, and a dual-signal electrochemical aptasensor for the simultaneous detection of acetamiprid and malathion was established by modified glassy carbon electrode (GCE). The limits of detection (LOD) were calculated to be 43.7 pg mL-1 for acetamiprid and 63.4 pg mL-1 for malathion. The aptasensor determined acetamiprid and malathion in spinach and rape with the recovery rates of 88.9%-112.5% and 98.0%-114.1%, respectively.

Construction of electrochemical and electrochemiluminescent dual-mode aptamer sensors based on ferrocene dual-functional signal probes for the sensitive detection of Alternariol

In this study, a novel dual-mode aptamer sensor was developed using Fca-DNA₂ as the quenching electrochemiluminescence (ECL) and electrochemical (EC) signal response probe, and Ru-MOF/Cu@Au NPs were used as the ECL substrate platform to detect Alternariol (AOH) via a competitive reaction between AOH and Fca-DNA₂. Compared with the conventional aptamer sensor with a single detection signal, this dual-mode aptamer sensor has the following advantages: (1) Electrodeposition-based rapid synthesis Ru-MOF on the electrode surface. (2) The Signal amplification substance Cu@Au NPs can synergistically catalyze Triethanolamine (TEOA) to amplify ECL behavior. (3) The aptamer sensor employs the dual-functional material Fca, which can detect both ECL and EC signals, increasing the result accuracy. Both ECL and EC methods have excellent detection performance for AOH in the detection range of 0.1 pg/mL to 100 ng/mL, with detection limits of 0.014 and 0.083 pg/mL, respectively, and are expected to be used for sensitive AOH detection in real samples.

Co-amplification of luminol-based electrochemiluminescence immunosensors based on multiple enzyme catalysis of bimetallic oxides CoCeOx and NiMnO3 for the detection of CYFRA21-1

The accelerated energy supply of co-reactants is an extremely effective strategy for achieving highly sensitive electrochemiluminescence analysis, and binary metal oxides would be an excellent tool for this purpose owing to the nano-enzyme acceleration of mixed metal valence states. Herein, an electrochemiluminescent (ECL) immunosensor for monitoring the concentration of cytokeratin 19 fragment antigen 21-1 (CYFRA21-1) was developed based on a co-amplification strategy triggered by two bimetallic oxides, CoCeO_x and NiMnO₃, with luminol as the luminophore. CoCeO_x derived from an MOF exhibits a large specific surface area and excellent loading capacity as a sensing substrate, and the peroxidase properties enable the catalysis of hydrogen peroxide to provide energy supply to the underlying radicals. The dual enzymatic properties of flower-like NiMnO₃ were employed as probe carriers for luminol enrichment. The peroxidase properties built on Ni²⁺/Ni³⁺ and Mn³⁺/Mn⁴⁺ binary redox pairs resulted in the integration of highly oxidative hydroxyl radicals, and the oxidase properties provided additional superoxide radicals via dissolved oxygen. The practically proven multi-enzyme-catalyzed sandwich-type ECL sensor easily accomplished an accurate immunoassay of CYFRA21-1, harvesting a detection limit of 0.3 pg mL^-1 in the linear range of 0.001-150 ng mL^-1. In conclusion, this work explores the cyclic catalytic amplification of mixed-valence binary metal oxides with nano-enzyme activity in the field of ECL and develops an effective pathway for ECL immunoassay.

Electrochemiluminescence Immunosensors Based on ECL-RET Triggering between Mn SANE/PEI-Luminol and PtCu/h-MPF for Ultrasensitive Detection of CEA

In this paper, a novel donor-acceptor pair was creatively proposed based on the principle of electrochemiluminescence resonance energy transfer (ECL-RET): luminol immobilized on polyethyleneimine (PEI)-functionalized manganese-based single-atom nanozymes (Mn SANE/PEI-luminol, donor) and a PtCu-grafted hollow metal polydopamine framework (PtCu/h-MPF, acceptor). A quenched ECL immunosensor was constructed for the ultrasensitive analysis of carcinoembryonic antigen (CEA). Mn SANE, as an efficient novel coreaction accelerator with the outstanding performance of significantly activating H₂O₂ to produce large amounts of ROS, was further modified by the coreactant PEI, which efficiently immobilized luminol to form a self-enhanced emitter. As a result, the electron transport distance was effectively shortened, the energy loss was reduced, and luminol achieved a high ECL efficiency. More importantly, PtCu-grafted h-MPF (PtCu/h-MPF) was proposed as a novel quencher. The UV-vis spectra of PtCu/h-MPF partially overlap with the ECL spectra of Mn SANE/PEI-luminol, which can effectively trigger the ECL-RET behavior between the donor and the acceptor. The multiple quenching effect on Mn SANE/PEI-luminol was achieved, which significantly improved the sensitivity of the immunosensor. The prepared immunosensor exhibited good linearity in the concentration range of 10^-5 to 80 ng/mL. The results indicate that this work provides a new method for the early detection of CEA in clinical diagnosis.

Ultrasound-pretreatment combined with Ti3C2-TiO2-AuNPs enhancing the electrogenerated chemiluminescence of the air-saturated luminol for exosomes detection

It is still a great challenge to develop effective strategies to improve the low electrogenerated chemiluminescence (ECL) of air-saturated luminol. Herein, the synergistic effects of Ti₃C₂-TiO₂-AuNPs nano hybrid and high-intensity focused ultrasound pretreatment (ultrasound-pretreatment) were used to significantly improve the ECL emission of the air-saturated luminol, and the mechanism was proposed. The ultrasound-pretreatment as a green method with the cavitation effect could form O₂^-• and H₂O₂ in situ as an initiator. TiO₂ and Au nanoparticles (AuNPs) were in situ decorated on the Ti₃C₂ surface to form Ti₃C₂-TiO₂-AuNPs, and it was proved as a highly efficient booster which could catalyze and aggregate H₂O₂ to the O₂^-•. The utilization rate of intermediates has been greatly improved. Exosomes as model targets can be sensitively detected by the ECL sensor. The detection limit was 195 particles μL^-1. The detection results of exosomes in actual samples are satisfactory. We believe that the ultrasound-pretreatment strategy could be extended to the sensitive detection in the biological sample.

Recent progress in assembly strategies of nanomaterials-based ultrasensitive electrochemiluminescence biosensors for food safety and disease diagnosis

The Electrochemiluminescence (ECL)-based biosensors have received considerable attention in food contaminants and disease diagnosis, due to their fascinating advantages such as low cost, fast analysis speed, wide linear range, high sensitivity, and excellent anti-interference ability. Meanwhile, with the vigorous development and improvement of nanotechnology, biosensor assembly strategies tend to diversify and be multifunctional. This review focuses on the representative ECL biosensors in food safety and disease diagnosis reported by our research group and other research groups based on nanomaterials assembly strategies in recent years. According to the different roles of nanomaterials played in the constitution of ECL biosensors, nanomaterials would be divided into the following two categories to be summarized: (1) Nanomaterials for signal amplification. (2) Nanomaterials as ECL emitters. Finally, this review prospects the perspectives on the future development direction of ECL biosensor in food safety and disease diagnosis.

Dancing in local space: rolling hoop orbital amplification combined with local cascade nanozyme catalytic system to achieve ultra-sensitive detection of exosomal miRNA

The exosomal miRNA (exo-miRNA) derived from tumor cells contains rich biological information that can effectively aid in the early diagnosis of disease. However, the extremely low abundance imposes stringent requirements for accurate detection techniques. In this study, a novel, protease-free DNA amplification strategy, known as “Rolling Hoop Orbital Amplification” (RHOA), was initially developed based on the design concept of local reaction and inspired by the childhood game of rolling iron ring. Benefiting from the local space constructed by the DNA orbital, the circular DNA enzyme rolls directionally and interacts efficiently with the amplification element, making it nearly 3-fold more productive than conventional free-diffusion amplification. Similarly, the localized cascade nanozyme catalytic system formed by bridging DNA probes also exhibits outperformed than free ones. Therefore, a localized energized high-performance electrochemiluminescence (ECL) biosensor was constructed by bridging cascading nanozymes on the electrode surface through DNA probes generated by RHOA, with an impressive limit of detection (LOD) of 1.5 aM for the detection of exosomal miRNA15a-5p and a stable linearity over a wide concentration range from 10^− 2 to 10⁸ fM. Thus, this work is a focused attempt at the localized reaction, which is expected to provide a reliable method for accurately detecting of exo-miRNAs.

Self-enhanced electrochemiluminescence of luminol induced by palladium-graphene oxide for ultrasensitive detection of aflatoxin B1 in food samples

In this work, a novel and credible electrochemiluminescence immunoassay (ECLIA) was constructed for the ultrasensitive and highly selective detection of aflatoxin B₁ (AFB₁). Amino-functionalized 3D graphene hydrogel (NGH) served as the ECL platform with the self-enhanced ECL of luminol-palladium-graphene oxide (lum-Pd-GO) acting as a marker for the antibodies against AFB₁. Pd-GO was synthesized by a self-redox method; it promotes the formation of reactive oxygen species, which are important to the ECL of luminol, from dissolved oxygen. The π-π conjunction between luminol and GO shortens their electron transfer distance, resulting in an amplified ECL signal (∼8.5 times larger than conventional luminol ECL). Moreover, 3D NGH, with its good conductivity, large surface area, and sufficient amino groups, was used to anchor gold nanoparticles (AuNPs), which subsequently immobilized bovine serum albumin (BSA)-AFB₁ through Au-S bonds. The resultant, competitive ECLIA gave a relative low detection limit of 5 × 10^-3 μg kg^-1 and exhibited a broad linear relationship over the range of 0.05-50 μg kg^-1. Finally, the proposed ECLIA was successfully used to analyze AFB₁ contents in food samples. ECLIA: electrochemiluminescence immunoassay; AFs: Aflatoxins; HPLC: high-performance liquid chromatography.

Novel sandwich-type electrochemiluminescence aptasensor based on luminol functionalized aptamer as signal probe for kanamycin detection

A novel sandwich electrochemiluminescence (ECL) aptasensor was developed for highly sensitive detection of kanamycin using luminol-functionalized aptamer as a signal probe. The aptasensor used polyethyleneimine (PAMAM), molybdenum disulfide, and multi-walled carbon nanotubes as the substrate, which provided enough binding sites for aptamer1 (the aptamer which modified NH₂) coupling. We found that kanamycin could be detected using the aptamer1 containing the same base sequence as aptamer2 (the aptamer which modified SH) on the electrode self-assembly. In addition, PAMAM nanocomposites can be used to effectively improve the ECL intensity by loading a high volume of luminol molecules and silver nanoparticles. In the presence of kanamycin, the sandwiched aptasensor was formed between aptamer1 and the probe of aptamer2 connecting silver nanoparticles, luminol, and PAMAM, resulting in a proportional increase of ECL intensity. Since the significantly enhanced loading of luminol by PAMAM accelerated the electron transfer, the sensitive aptasensor exhibited a wide linear range of detection from 1 × 10^-3 to 1 × 10³ ng/mL and a low detection limit of 0.21 pg/mL (S/N) for kanamycin. The fabricated aptasensor was successfully applied in quantitative analysis of kanamycin in milk samples.

Dual-mode sensing of biomarkers based on nano 3D Cu-Flo.@AuNPs-electrocatalyzed oxidation of glucose inducing in-situ H2O2-generation system

A bimodal 3D-electrochemiluminescence (ECL) analysis method was developed, which integrated simpleness, label-free, high-throughput and real time detection together. Firstly, a novel 3D copper-based nanosheet micro-material (Cu-Flo. NMs) coupled with gold nanoparticles/Cysteine (Cu-Flo.@AuNPs-Cys) was prepared to use as the versatile label for both colorimetric and ECL techniques. The 3D-Cu-Flo.@AuNPs-Cys having glucose oxidase-like activity could catalyze glucose to produce H₂O₂ in situ, which was further found to be capable of exhibiting a 30.95-fold higher ECL-intensity for luminol than bare glassy carbon electrodes (GCE). Taking advantages of the 3D-Cu-Flo.@AuNPs-Cys above, a colorimetric and ECL-channel sensor (GCE/3D-Cu-Flo.@AuNPs-Cys) were constructed simultaneously for glucose detection. The fabricated sensor displayed a wide linear range (Glucose: 0.001-50 mmol L^-1, AFP: 2.25 × 10^-7-225 ng mL^-1), impressive low limit of detection (Glucose: 1.27 × 10^-7 mol L^-1, AFP: 1.92 × 10^-8 ng mL^-1, S/N = 3) and acceptable recovery (Glucose: 94% ∼ 104%, AFP: 96.04% ∼ 102.29%) in practical sample. Furthermore, the biosensor showed ultrafast (0.5 min) analysis efficiency, high stability for 6 cyclic potential scans and satisfactory reproducibility for 7 repeated tests. These results demonstrated the proposed 3D dual-modal ECL-biosensor for biomarkers detection had a great potential in clinical diagnostics, promoting the application in biomedical researching and POCT.

High-Entropy Oxide for Highly Efficient Luminol-Dissolved Oxygen Electrochemiluminescence and Biosensing Applications

The luminol-dissolved O₂ (DO) electrochemiluminescence (ECL) sensing system has recently gained growing interest; however, the drawback of the ultra-low ECL signal response greatly hinders its potential quantitative applications. In this work, for the first time, we explored the use of high entropy oxide (HEO) comprising five metal ingredients (Ni, Co, Cr, Cu, and Fe), to accelerate the reduction reaction of DO into reactive oxygen species (ROS) for boosting the ECL performance of the luminol-DO system. Benefiting from the existing abundant oxygen vacancies induced by the unique crystal structure of the HEO, DO could be efficiently converted into ROS, thus significantly boosting the performance of the corresponding ECL sensor (with an ∼240-fold signal enhancement in this study). As a proof of concept, under optimal conditions, the developed HEO-involved luminol-DO ECL sensing system was successfully applied for efficient biosensing of dopamine and alkaline phosphatase with a fine linear range from 1 pM to 10 nM and from 0.01 to 100 U/L as well as a low limit of detection of 5.2 pM and 0.008 U/L, respectively.

Dye-functionalized metal-organic frameworks with the uniform dispersion of MnO2 nanosheets for visualized fluorescence detection of alanine aminotransferase

The wide applications of metal-organic framework (MOF) luminescent materials in the field of optics have attracted the general attention of researchers. Therefore, the development of simple and multifunctional MOF light-emitting platforms have become a research hotspot. The composites (MnO2@ZIF-8-luminol) were prepared by an in situ synthesis method and room-temperature covalent reaction. The composites and o-phenylenediamine (OPD) constitute a dual emission sensor for detecting alanine aminotransferase (ALT). OPD can be oxidized by MnO₂ to 2,3-diaminophenazine (DAP) with yellow fluorescence emission, which inhibits the blue emission of luminol through fluorescence resonance energy transfer (FRET). The presence of tiopronin (TP) will destroy the FRET process, extinguishing the yellow fluorescence emission and restoring the blue fluorescence emission. The special effect between ALT and TP will further reverse the changes in the two fluorescent signals. Moreover, in the detection process, when the blue and yellow fluorescence energies in the system are within a certain range, a new white light emission will be generated, which causes the sensing of ALT to present ternary visualization. In addition, a high-security anti-counterfeiting platform is constructed by using the prepared materials and agarose hydrogels. The anti-counterfeiting platform can encrypt information on demand according to the luminous characteristics of different materials. This study not only provides a typical case of ternary visualization sensing by MOF-based materials but also develops a possible method for the construction of a MOF-based hydrogel anti-counterfeiting platform.

Ultrasensitive ECL aptasensing of kanamycin based on synergistic promotion strategy using 3,4,9,10-perylenetetracar-boxylic-l-cysteine/Au@HKUST-1

Herein, a sensitive and selective electrochemiluminescence (ECL) aptasensor was designed using Au@HKUST-1 as accelerator towards the perylene derivative (PTC-Cys)/peroxydisulfate (S₂O₈^2-) system for kanamycin (KAN) assay. Firstly, the PTC-Cys was prepared by covalently binding l-cysteine to 3,4,9,10-perylenete-tracarboxylic acid, which was acted as the luminophore. Then Au@HKUST-1could play the part of effective catalyst to accelerate the electrochemical reduction process of S₂O₈^2-to produce more sulfate radical anions (SO₄^•-), thus the ECL signal of the compound was noticeably raised by 2.4 times in comparison with that in which only luminophore and S₂O₈^2- are present, achieving signal amplification of the ECL system. In the presence of KAN, aptamer was pulled down from the sensing interface, achieving a considerable enhancement of ECL intensity in S₂O₈^2- solution. Upon the optimal condition, our proposed strategy can quantify the concentration of KAN from 1.0 × 10^-13 to 1.0 × 10^-8 M with low limit of detection of 4.2 × 10^-14 M (S/N = 3).Besides, our proposed ECL aptasensor exhibited excellent sensitivity, stability and specificity, and could be successfully applied to detect KAN in practical samples, which proved its potential to detect other antibiotics in food security.

Anchoring luminol based on Ti3C2-mediated in situ formation of Au NPs for construction of an efficient probe for miRNA electrogenerated chemiluminescence detection

An efficient electrogenerated chemiluminescence (ECL) nanoprobe (luminol-Au NPs-Ti₃C₂) was constructed based on Ti₃C₂Tx MXene (Ti₃C₂)-mediated in situ formation of Au NPs and anchoring luminol to fabricate a sensitive ECL biosensor for miRNA-155 detection. Herein, Ti₃C₂ with rich Ti vacancy defects was used as reducing agent, and Au NPs were generated in situ and anchored on the Ti₃C₂ (Au NPs-Ti₃C₂). Moreover, the Au NPs-Ti₃C₂ composites were used as a carrier and provided a large number of sites for the efficient linking of luminol through Au-N bonds to form stable luminol-Au NPs-Ti₃C₂. The immobilization of ECL emitters is a versatile strategy which not only shortens the electron transmission distance between luminol and electrode, but also provides naked catalytic predominated (111) facets of Au NPs with high electrocatalytic activity, significantly improving the ECL signal of luminol. Furthermore, a catalytic hairpin assembly (CHA) reaction was used, resulting in further amplification of the signal. As a result, the as-prepared ECL biosensor exhibited a linear range from 0.3 fM to 1 nM with a detection limit of 0.15 fM, and demonstrated high reliability of miRNA-155 detection even in human serum samples. The construction of a multifunctional ECL probe with excellent ECL emission opens a new chapter for the application of Ti₃C₂ in the field of bioanalysis. Herein, Au NPs were generated in situ and anchored on the Ti₃C₂ (Au NPs-Ti₃C₂). Moreover, the Au NPs-Ti₃C₂ was used as a carrier and linked luminol through Au-N bonds to form a stable luminol-Au NPs-Ti₃C₂ nanoprobe. The strategy displayed versatility which not only shortened the electron transmission distance between luminol and the electrode, but also provided a catalytic surface with high electrocatalytic activity of Au NPs that significantly improved the ECL signal of luminol.

A dual signal-amplified electrochemiluminescence immunosensor based on core-shell CeO2-Au@Pt nanosphere for procalcitonin detection

A dual signal-amplified sandwich electrochemiluminescence (ECL) immunosensor was fabricated for trace detection of procalcitonin (PCT). CeO₂-Au@Pt composed of sea urchin-like Au@Pt nanoparticles coated on CeO₂ hollow nanospheres was immobilized on electrode surface to electrochemically catalyze H₂O₂ to produce a large number of superoxide anion (O₂^•-). The immunosensor was prepared by linking the capture antibody on immobilized CeO₂-Au@Pt with heptapeptide (HWRGWVC), which could maintain the activity of the antibody. The prepared Au star@BSA was used to bind abundant luminol for labeling the secondary antibody (Ab₂). Upon the sandwich-typed immunoreactions, the O₂^•- could react with the introduced luminol on the immunosensor surface to produce strong ECL intensity. With an outstanding linear detection range and a low detection limit of 17 fg/mL, the ECL immunosensor permitted ultrasensitive detection of PCT at a low H₂O₂ concentration and demonstrated its high application potential in the clinical assay.

A novel metal organic gel with superior oxidase-like activity for efficient and sensitive chemiluminescence detection of uric acid

It is found that MIL-100(Fe) gels, as a kind of metal-organic gels (MOGs), constitutting of iron (Fe³⁺) and trimesic acid (H₃BTC), has been regarded as the efficient catalyst of luminol chemiluminescence (CL) system without the presence of extra oxidants in the present work. MIL-100(Fe) gels that have possessed mimicking oxidase-like activity can excellently enhanced luminol CL intensity by accelerating the generation of reactive oxygen species. Furthermore, with the addition of uric acid (UA), the CL signal has been dramatically inhibited under alkaline condition. Hence, the CL intensity inhibiting ratio (I₀/I_S) was proportional to the increasing concentration of UA in the rang from 10 nM to 4000 nM with the detection limit of 5.9 nM. This method has been successfully applied for analysis of UA with acceptable recoveries ranging from 97.0% to 107.9% in urine sample. These results indicates that this study open up a novel, sensitive and convenient method to detect UA in biological samples.

Electrochemiluminescence immunosensor for cytokeratin fragment antigen 21-1 detection using electrochemically mediated atom transfer radical polymerization

The cytokeratin fragment antigen 21-1 (CYFRA 21-1) protein is a critical tumor biomarker tightly related to non-small cell lung cancer (NSCLC). Herein, we prepared an effective electrochemiluminescence (ECL) immunosensor for CYFRA 21-1 detection using electrochemically mediated atom transfer radical polymerization (eATRP). The CYFRA 21-1 antigen was fixed on the electrode surface by constructing a sandwich type antibody-antigen-antibody immune system. The sensitivity of ECL was improved by using the eATRP reaction. In this method, eATRP was applied to CYFRA 21-1 detection antibody with N-acryloyloxysuccinimide as functional monomer. This is the first time that ECL and eATRP signal amplification technology had been combined. Under the optimized testing conditions, the immunosensor showed a good linear relation in the range from 1 fg mL⁻¹ to 1 μg mL⁻¹ at a limit of detection of 0.8 fg mL⁻¹ (equivalent to ~ 134 molecules in a 10 μL sample). The ECL immunosensing system based on eATRP signal amplification technology provided a new way for rapid diagnosis of lung cancer by detecting CYFRA 21-1.