Screen printed bipolar electrode for sensitive electrochemiluminescence detection of aflatoxin B1 in agricultural products

Ionic liquid-enhanced silica aerogels for the specific extraction and detection of aflatoxin B1 coupled with a smartphone-based colorimetric biosensor

The polymer ionic liquid (1-allyl-3-butylimidazolium bromide) enhanced silica aerogel was modified onto the surface of stainless-steel mesh to immobilize aptamer-1 for the specific recognition of AFB1. The porous channels of silica aerogel could prevent the interference of macromolecules in food samples. Enzyme kinetic analysis showed that the MoS2/Au was an effective peroxidase mimic with a relatively low Michaelis constant (Km) value of 0.17 mM and a high catalytic rate of 3.87 × 10-8 mol (L·s)-1, which exhibited obvious superiority compared with horseradish peroxidase. The established "sandwich-structure" biosensor was coupled with the smartphone "Color Picker" application was used to detect AFB1 with a wide linear range (1-100 ng mL-1) and low detection limit (0.25 ng mL-1). The anti-interference ability of the established biosensor was evaluated by adding different concentrations of standards in corn, peanut, and wheat and matrix effects were 90.84-106.11 %. The results showed that this method demonstrated high specificity, sensitivity, rapidity and low interference in food samples.

Spatial-Potential-Color-Resolved Bipolar Electrode Electrochemiluminescence Biosensor Using a CuMoOx Electrocatalyst for the Simultaneous Detection and Imaging of Tetracycline and Lincomycin

A spatial-potential-color-resolved bipolar electrode electrochemiluminescence biosensor (BPE-ECL) using a CuMoOx electrocatalyst was constructed for the simultaneous detection and imaging of tetracycline (TET) and lincomycin (LIN). HOF-101 emitted peacock blue light under positive potential scanning, and CdSe quantum dots (QDs) emitted green light under negative potential scanning. CuMoOx could catalyze the electrochemical reduction of H2O2 to greatly increase the Faradic current of BPE and realize the ECL signal amplification. In channel 1, CuMoOx-Aptamer II (TET) probes were introduced into the BPE hole (left groove A) by the dual aptamer sandwich method of TET. During positive potential scanning, the polarity of BPE (left groove A) was negative, resulting in the electrochemical reduction of H2O2 catalyzed by CuMoOx, and the ECL signal of HOF-101 was enhanced for detecting TET. In channel 2, CuMoOx-Aptamer (LIN) probes were adsorbed on the MXene of the driving electrode (DVE) hole (left groove B) by hydrogen-bonding and metal-chelating interactions. LIN bound with its aptamers, causing CuMoOx to fall off. During negative potential scanning, the polarity of DVE (left groove B) was negative and the Faradic current decreased. The ECL signal of CdSe QDs was reduced for detecting LIN. Furthermore, a portable mobile phone imaging platform was built for the colorimetric (CL) detection of TET and LIN. Thus, the multiple mode-resolved detection of TET and LIN could be realized simultaneously with only one potential scan, which greatly improved detection accuracy and efficiency. This study opened a new technology of BPE-ECL sensor application and is expected to shine in microchips and point-of-care testing (POCT).

Preparation of size-tunable Fe3O4 magnetic nanoporous carbon composites by MOF pyrolysis regulation for magnetic resonance sensing of aflatoxin B1 with excellent anti-matrix effect

Magnetic nanoporous materials represent a new emerging category of magnetic materials for construction of magnetic resonance sensors. In this study, we adopted the metal-organic framework materials, MIL-101(Fe), as the precursor to prepare series nanoporous-carbon-Fe3O4 (NPC-Fe3O4) composites. Results showed that Fe3O4 were uniformly distributed in MIL-101(Fe) and the size of MNP was precisely tuned at different pyrolysis temperatures, conferring the optimal NPC-Fe3O4-450 °C composite with dramatically improved T2 relaxivity. The NPC-Fe3O4-450 °C composite was modified with antibodies and antigens, respectively, for detection of aflatoxin B1 in various food samples with complicated matrix. Range from 0.010 ng mL-1 to 2.0 ng mL-1, extreme low detection limit of 5.0 pg mL-1, and satisfied recoveries were successfully achieved, indicating excellent anti-matrix effect. These findings offer a new dimension to engineer novel magnetic materials with improved relaxivity for simple and easy sensing of food hazards in complicated food matrix without any purification or separation procedures.

An "on-off-on" electrochemiluminescence aptasensor based on a self-enhanced luminophore for ochratoxin A detection

A highly selective and sensitive "on-off-on" electrochemiluminescence (ECL) aptasensor based on a self-enhanced luminophore was developed for the detection of ochratoxin A (OTA). Specifically, polyethyleneimine functionalized multi-walled carbon nanotubes decorated with gold nanoparticles (AuNPs-PEI-MWCNTs) were used as the electrode matrix to accelerate electron transfer and provide a favorable microenvironment for self-enhanced luminophore loading and ECL signal enhancement. In addition, black phosphorus quantum dots (BPQDs) were used as co-reactants of the ECL reagent tris (2,2'-bipyridyl) ruthenium(II) (Ru(bpy)32+) in ECL experiments, and the reaction mechanism was investigated. The self-enhanced luminophore Ru@SiO2-BPQDs was obtained by encapsulating Ru(bpy)32+ in silica (SiO2) nanoparticles and then combining it with BPQDs through electrostatic interaction. In conventional ECL systems, the emitter and its co-reactants reacted via the inter-nanoparticle pathway, leading to long distance electron transfer. However, the electron transfer distance in the self-enhanced luminophore was significantly shortened due to the intra-nanoparticle electron transfer pathway because BPQDs and oxidized Ru(bpy)32+ were bound within one nanoparticle, thereby improving ECL efficiency to achieve the first "switch-on" state. Then, the luminophore was quenched using ferrocenes (Fc) modified on an aptamer to achieve the "switch-off" state. Finally, OTA was specifically identified by the adapter, causing Fc to be released from the sensor interface, restoring the ECL intensity to achieve the second "switch-on" state. Under optimal conditions, the aptasensor exhibited good sensitivity, stability, and reproducibility, with a linear detection range from 0.1 to 320 ng/mL and a detection limit of 0.03 ng/mL. The novel ECL aptasensor provided a common analytical tool for the detection of mycotoxins and other small molecules.

Two electrochemiluminescence immunosensors for the sensitive and quantitative detection of the CP4-EPSPS protein in genetically modified crops

Two different models of electrochemiluminescence (ECL) immunosensors for the sensitive and quantitative detection of the CP4-EPSPS protein in genetically modified (GM) crops were proposed in this study. One was a signal-reduced ECL immunosensor based on nitrogen-doped graphene, graphitic carbon nitride and polyamide-amine (GN-PAMAM-g-C₃N₄) composites as the electrochemically active substance. The other model was a signal-enhanced ECL immunosensor based on a GN-PAMAM modified electrode for the detection of CdSe/ZnS quantum dots (QDs)-labeled antigens. The ECL signal responses of the reduced and enhanced immunosensors linearly decreased as the increase of the soybean RRS and RRS-QDs content in the range of 0.05% to 1.5% and 0.025% to 1.0%, with the limits of detection of 0.03% and 0.01% (S/N = 3), respectively. Both of the ECL immunosensors showed good specificity, stability, accuracy, and reproducibility in the analysis of real samples. The results indicate that the two immunosensors provide an ultra-sensitive and quantitative approach for the determination of the CP4-EPSPS protein. Due to their outstanding performances, the two ECL immunosensors could be useful tools for achieving the effective regulation of GM crops.

Recent Advances in Electrochemiluminescence Biosensors for Mycotoxin Assay

Rapid and efficient detection of mycotoxins is of great significance in the field of food safety. In this review, several traditional and commercial detection methods are introduced, such as high-performance liquid chromatography (HPLC), liquid chromatography/mass spectrometry (LC/MS), enzyme-linked immunosorbent assay (ELISA), test strips, etc. Electrochemiluminescence (ECL) biosensors have the advantages of high sensitivity and specificity. The use of ECL biosensors for mycotoxins detection has attracted great attention. According to the recognition mechanisms, ECL biosensors are mainly divided into antibody-based, aptamer-based, and molecular imprinting techniques. In this review, we focus on the recent effects towards the designation of diverse ECL biosensors in mycotoxins assay, mainly including their amplification strategies and working mechanism.

Novel electrochemiluminescence biosensor of fumonisin B1 detection using MWCNTs-PDMS flexible bipolar electrode

A novel portable and disposable bipolar electrode (BPE)-electrochemiluminescence (ECL) device was fabricated for fumonisin B₁ (FB₁) detection. BPE was fabricated by using MWCNTs and polydimethylsiloxane (PDMS) due to their excellent electrical conductivity and good mechanical stiffness. After the deposition of Au NPs on the cathode of BPE, the ECL signal could be improved 89-fold. Then a specific aptamer-based sensing strategy was constructed by grafting capture DNA on Au surface, followed by hybridizing with aptamer. Meanwhile, an excellent catalyst, Ag NPs was labeled on aptamer to activate oxygen reduction reaction, leading to a 13.8-fold enhancement in ECL signal at the anode of BPE. Under the optimal conditions, the biosensor exhibited a wide linear range of 0.10 pg/mL to 10 ng/mL for FB₁ detection. Meanwhile, it demonstrated satisfactory recoveries for real sample detection with good selectivity, making it to be a convenient and sensitive device for mycotoxin assay.

DNA tetrahedral scaffold-corbelled 3D DNAzyme walker for electrochemiluminescent aflatoxin B1 detection

The reaction efficiency of surface-based DNA walker can directly affect the properties of a biosensor. Herein, three-dimensional (3D) DNAzyme walker were first fixed on the top of DNA tetrahedral scaffold to improve the immobilization efficiency. Ferrocene (Fc) that labeled at substrate strand ends effectively quenched the electrochemiluminescence (ECL) signal of Ru(bpy)₂(cpaphen)²⁺, yielding the sensor in a "signal-off" state. Upon the addition of aflatoxin B₁ (AFB₁), 3D DNAzyme walker was activated and fueled by Na⁺, accordingly releasing Fc and recovering the ECL signal of Ru(bpy)₂(cpaphen)²⁺. Due to the high movement efficiency of such 3D DNAzyme walker, ultrasensitive detection of AFB₁ was achieved in the range of 1.0 fg mL^-1-10 ng mL^-1, with a detection limit of 0.58 fg mL^-1. Moreover, satisfactory results were obtained while detecting AFB₁ in corn and peanut samples, suggesting it has a potential application in food safety analysis.

Multifunctional Photoelectrochemical Biosensor Based on ZnIn2S4/ZnS QDs@Au-Ag-Reversed Photocurrent of Cu-Metal-Organic Framework Coupled with CRISPR/Cas-12a-Shearing for Assay of Dual Targets

False positives and negatives in bioanalytical assays remain a persistent problem. Herein, a multifunctional photoelectrochemical (PEC) biosensor based on ZnIn₂S₄ (ZIS)/ZnS quantum dots (QDs)@Au-Ag-reversed photocurrent of Cu-metal-organic framework (MOF) coupled with CRISPR/Cas-12a-shearing was innovatively developed for assay of dual targets. First, Cu-MOF as a good PEC material shows cathodic photocurrent. Then, numerous ZIS/ZnS QDs were assembled to the Au-Ag nanoparticles (NPs) to prepare a stable and highly amplified signal probe, which can just match the energy level of Cu-MOFs and realized the polarity-reversed photocurrent of Cu-MOF for the first time. As the empty-core nanostructure of Au-Ag NPs has a high specific surface area and low material density, the bimetallic nanocrystal can much increase the reaction rate and improve the redox efficiency. When target CEA-produced cDNA opened the hairpin DNA (HP1 DNA) on the electrode, the ZIS/ZnS QDs@Au-Ag signal probe was conjugated to the electrode via DNA hybridization, achieving a significantly reversed PEC current for CEA detection. Moreover, the specific binding of kanamycin/aptamer generated the acDNA (activator), which can activate the trans-cleavage activity of the CRISPR-CAS12a system on ssDNA, so the signal probe was sheared and caused the obvious decrease of PEC signal for kanamycin detection. The newly developed ZIS/ZnS QDs@Au-Ag NPs displayed excellent PEC properties and reversed photocurrent to MOF and were combined with the unique CRISPR-Cas12a system to achieve sensitive detection of dual targets, which can open a new polarity-reversed PEC sensing platform for rapid and accurate analysis of multiple targets and can effectively avoid false positives results in clinical testing.

Construction of hybridization chain reaction induced optical signal directed change of photonic crystals-DNA hydrogel sensor and its visual determination for aflatoxin B1

Herein, we have introduced hybridization chain reaction (HCR) into the photonic crystals (PhCs) hydrogel, for the first time, realizing HCR for inducing the change of the optical signal of PhCs hydrogel and using this hydrogel as a sensor for determination of the aflatoxin B1 (AFB1). By using specific sequences as the cross-linker, the extension of the cross-linker by HCR drives the swelling of the hydrogel, and the optical property of 2D PhCs array converts this swelling into a change of the Debye diffraction ring. Moreover, by further selecting the aptamer to construct the cross-linker, the hydrogel is also endowed with a unique capability for AFB1, making the hydrogel a novel sensor based on the signal amplification strategy. The results show that the designed hairpin DNAs can effectively trigger the HCR and cause the swelling of hydrogel, and the hydrogel sensor has a good determination performance and high specific recognition for AFB1.

Portable detection of multiple mycotoxins based on a sonic toothbrush, microfluidic chip and smartphone

A portable method for on-site detection of three mycotoxins was developed based on a sonic toothbrush, microfluidic chip and smartphone. Our method could complete all procedures, including sample pretreatment, signal conversion and processing, without any sophisticated instruments. The limits of detection for these mycotoxins were lower than the limit values in cereals in the standards of China and the European Union.

Microelectromechanical Microsystems-Supported Photothermal Immunoassay for Point-of-Care Testing of Aflatoxin B1 in Foodstuff

Accurate identification of acutely toxic and low-fatality mycotoxins on a large scale in a quick and cheap manner is critical for reducing population mortality. Herein, a portable photothermal immunosensing platform supported by a microelectromechanical microsystem (MEMS) without enzyme involvement was reported for point-of-care testing of mycotoxins (in the case of aflatoxin B₁, AFB₁) in food based on the precise satellite structure of Au nanoparticles. The synthesized Au nanoparticles with a well-defined, graded satellite structure exhibited a significantly enhanced photothermal response and were coupled by AFB₁ antibodies to form signal conversion probes by physisorption for further target-promoted competitive responses in microplates. In addition, a coin-sized miniature NIR camera device was constructed for temperature acquisition during target testing based on advanced MEMS fabrication technology to address the limitation of expensive signal acquisition components of current photothermal sensors. The proposed MEMS readout-based microphotothermal test method provides excellent AFB₁ response in the range of 0.5-500 ng g^-1 with detection limits as low as 0.27 ng g^-1. In addition, the main reasons for the efficient photothermal transduction efficiency of Au with different graded structures were analyzed by finite element simulations, providing theoretical guidance for the development of new Au-based photothermal agents. In conclusion, the proposed portable micro-photothermal test system offers great potential for point-of-care diagnostics for residents, which will continue to facilitate immediate food safety identification in resource-limited regions.

Insights into the Mechanism of Bipolar Electrodeposition of Au Films and Its Application in Visual Detection of Prostate Specific Antigens

Au particles are commonly used for deposition on the surface of a bipolar electrode (BPE) in order to amplify electrochemical and electrochemiluminescence (ECL) signal because of their excellent conductivity, biocompatibility, and large surface area. In this work, a closed BPE device was fabricated and Au particles were deposited on the two poles of a BPE via bipolar deposition. Results indicated that the electrochemical stability of Au film on the anode part of the BPE and the reduction of AuCl₄^- to Au on the cathode part of the BPE depended on the conductivity of the solution. The prepared Au-Au BPE exhibited a remarkable amplification effect on the ECL signal. Then, a specific sensing interface was constructed on one pole of the BPE for the visual detection of prostate-specific antigens (PSA) based on sandwich-type immunoreactions between primary PSA antibodies (Ab₁) on the electrode surface, PSA, and SiO₂ nanoparticles labeled secondary PSA antibodies (SiO₂-Ab₂). The designed biosensor exhibited a good linear relationship for the ECL detection of PSA in the range of 1 × 10^-6 to 1 × 10^-10 g/mL with a correlation coefficient of 0.9866; the limit of detection (LOD) was 1.5 × 10^-11 g/mL. Additionally, the biosensor can realize the electrochemical imaging of PSA by regulating the electrochemical oxidation of the Au anode with the immunoreactions on the cathode part of BPE. Therefore, the small, portable and highly sensitive biosensors have great potential for on-site detection.

Chromatographic methods for rapid aflatoxin B1 analysis in food: a review

Aflatoxin B1 (AFB1) is a mycotoxin and is the most carcinogenic of all known chemicals. In view of the AFB1 characteristics of widespread distribution, serious pollution, great harm to humans, and animals and difficult to remove, it is urgent to develop a convenient and sensitive detection method. Moreover, chromatographic test strips (CTSs) are a rapid detection technology that combines labeling technology with chromatography technology. CTSs have been widely used in the fields of environmental monitoring, medical diagnosis, and food safety analysis in recent years. Different from other immune assays, they have the advantages of short measuring time, low cost, high efficiency and no need for professionals to operate. In addition, the introduction of nanomaterials has laid a good foundation for the detection of high sensitivity, high specificity and high efficiency via CTSs. Herein, we tend to comprehensively introduce the applications of chromatographic methods in AFB1 detection and pay attention to the signal detection modes based on nanomaterials in antibody-based immunochromatographic strips (ICSs), such as colorimetric, fluorescent, chemiluminescent, and Raman scattering sensing. Some typical examples are also listed in this review. In the end, we make a summary and put forward prospects for the development of CTSs.

Carboxyl porphyrin as signal molecule for sensitive fluorescent detection of aflatoxin B1 via ARGET-ATRP

In this work, a novel fluorescent biosensor for sensitive detecting of aflatoxin B₁ (AFB₁) was constructed through activators regenerated by electron transfer for atom transfer radical polymerization (ARGET-ATRP) for the first time. The AFB₁ antigen was immobilized on the carboxy magnetic beads (MBs) by forming a sandwich-type "aptamer-antigen-antibody" immune system. Then, acrylamid (AM) was introduced through ARGET-ATRP to provide binding sites for the signaling molecules. Finally, carboxy porphyrins (TPP*) were connected with monomers through an amide bond and fixed on the MBs. Under the optimal experimental conditions, the fluorescence intensity and the logarithm of the concentration of AFB₁ showed a good relationship from 100 fg mL^-1 to 100 ng mL^-1, with the limit of detection (LOD) as low as 8.38 fg mL^-1. In addition, the method shows good selectivity and excellent reproducibility. More importantly, the biosensor has applied to the quantitative analysis of AFB₁ in four Chinese medicines, and this strategy could potentially serve as a novel means for sensitive detecting of AFB₁ in complex matrices.

A self-powered and reagent-less electrochemical aptasensor based on a DNA walker and tetraferrocene for the detection of aflatoxin B1

We constructed a self-powered and reagent-less electrochemical aptamer sensor for sensitive detection of aflatoxin B1 (AFB1). Here, the metal ion Mn²⁺ required for the DNAzyme to drive a DNA walker is wrapped in UIO-66(Zr)-(COOH)₂ and AFB1 triggers the DNAzyme walking strands to automatically and continuously cut the tetraferrocene-labeled substrate strands, which results in a significant decrease in the electrochemical signal. Under the optimal conditions, the concentration dependence of AFB1 is linear in the concentration range of 0.1 pg mL^-1 to 0.195 μg mL^-1, and the limit of detection is as low as 4.8 fg mL^-1. The sensor displayed good performance even for samples with a complex matrix, such as a peanut sample. The recoveries of AFB1 obtained ranged from 95.5 to 106.8%. The developed sensing platform is reagent-less, self-powered, and highly sensitive. It holds great potential for detection of AFB1 in environmental and food samples.

Oxygen Free Radical Scavenger PtPd@PDA as a Dual-Mode Quencher of Electrochemiluminescence Immunosensor for the Detection of AFB1

Here, a dual-mode quenched electrochemiluminescence (ECL) immunosensor based on PtPd@PDA was proposed. Among them, nitrogen-doped hydrazide conjugated carbon dots (NHCDs), as an ECL emitter and a donor of resonance energy transfer, were quenched by PtPd@PDA (receptor). At the same time, PDA in PtPd@PDA, as an oxygen radical scavenger, completed the further quenching of the ECL signal by consuming O₂^•- generated by the decomposition of co-reactant H₂O₂. The dual-mode quenching from the above two channels was achieved. In addition, compared with the traditional carbon quantum dots, NHCDs as ECL emitters had lower excitation potential. Moreover, a large number of amino groups provided by aminated MWCNTs could capture more antibodies while connecting with NHCDs. Under the optimum experimental conditions, taking aflatoxin B1 as the target, the proposed sensor with good specificity, stability, and reproducibility had good linearity when the concentration of AFB1 was 0.01-100 ng/mL, with the detection limit of 2.63 pg/mL (S/N = 3). This strategy provided more possibilities for the application of dopamine metal nanocomposites in electrochemiluminescence analysis and offered a new approach to detect AFB1.

Novel Sensor Approaches of Aflatoxins Determination in Food and Beverage Samples

The rapid quantification of toxins in food and beverage products has become a significant issue in overcoming and preventing many life-threatening diseases. Aflatoxin-contaminated food is one of the reasons for primary liver cancer and induces some tumors and cancer types. Advancements in biosensors technology have brought out different analysis methods. Therefore, the sensing performance has been improved for agricultural and beverage industries or food control processes. Nanomaterials are widely used for the enhancement of sensing performance. The enzymes, molecularly imprinted polymers (MIP), antibodies, and aptamers can be used as biorecognition elements. The transducer part of the biosensor can be selected, such as optical, electrochemical, and mass-based. This review explains the classification of major types of aflatoxins, the importance of nanomaterials, electrochemical, optical biosensors, and QCM and their applications for the determination of aflatoxins.

Poly(carbazole-co-1,4-dimethoxybenzene): Synthesis, Electrochemiluminescence Performance, and Application in Detection of Fe3+

In this study, four polycarbazole derivatives (PCMB-Ds) with different alkyl side chains were designed and synthesized via Wittig–Horner reaction. A novel solid-phase electrochemiluminescence (ECL) system was prepared by immobilizing PCMB-D on an indium tin oxide (ITO) electrode with polyvinylidene fluoride (PVDF) in the presence of tripropylamine (TPrA). It could be found that the increase in alkyl side chain length had little effect on the ECL signal of PCMB-D, while the increase in the degree of polymerization (DP) greatly enhanced the ECL signal. Furthermore, the P-3/ITO ECL sensor based on the polyoctylcarbazole derivative (P-3) with the best ECL performance was successfully constructed and detected Fe³⁺ under the optimal experimental conditions. The ECL signal steadily diminished with the increased concentration of Fe³⁺ because of the competition and complexation between Fe³⁺ and P-3 under the condition of pH 7.4. This P-3/ITO platform could realize a highly sensitive and selective detection of Fe³⁺ with a wide detection range (from 6 × 10⁻⁸ mol/L to 1 × 10⁻⁵ mol/L) and low detection limit of 2 × 10⁻⁸ mol/L, which could allow the detection of Fe³⁺ in multiple scenarios, and would have a great application prospect.

Paper-Based Bipolar Electrode Electrochemiluminescence Platform Combined with Pencil-Drawing Trace for the Detection of M.SssI Methyltransferase

Herein, a hand-drawing paper-based bipolar electrode (BPE) electrochemiluminescence (ECL) platform for M.SssI methyltransferase (M.SssI MTase) assay was proposed via employing high electrocatalytic Pt@CeO₂ as an ECL co-reaction accelerator and pencil-drawing graphite electric circuits as wires and electrodes. Notably, the introduction of pencil-drawing trace not only simplified the manufacturing process but also reduced the cost and saved fabricating time. Meanwhile, Pt@CeO₂ with good electrocatalytic activity and satisfactory chemical stability was used at the anode of the closed BPE-ECL device to accelerate the oxidation rate of uric acid. Due to the balanced charges of the bipolar electrode, the ECL response of the MnS: CdS@ZnS/S₂O₈^2- system emitted on the cathode was enhanced. In situ growth of gold nanoparticles in the two electrode areas was convenient for DNA immobilization. With the above points in mind, the specific DNA double strands functionalized via Pt@CeO₂ were employed to identify M.SssI MTase. The unmethylated DNA double strands were cut by HpaII endonuclease, resulting in the quenching of the ECL signal. Under the optimal conditions, sensitive detection of M.SssI MTase in a wide linear range of 0.01-100 U·mL^-1 with a satisfactory detection limit of 0.008 U·mL^-1 was realized. The reliable and versatile BPE-ECL tool for the determination of M.SssI MTase with easy-to-operate pencil-drawing traces and independent solution systems provides a new opportunity to develop paper-based devices applied in early disease diagnosis and pathogenesis research.

Electrochemiluminescent sensor based on an aggregation-induced emission probe for bioanalytical detection

In recent years, with the rapid development of electrochemiluminescence (ECL) sensors, more luminophores have been designed to achieve high-throughput and reliable analysis. Impressively, after the proposed fantastic concept of "aggregation-induced electrochemiluminescence (AIECL)" by Cola, the application of AIECL emitters provides more abundant choices for the further improvement of ECL sensors. In this review, we briefly report the phenomenon, principle and representative applications of aggregation-induced emission (AIE) and AIECL emitters. Moreover, it is noteworthy that the cases of AIECL sensors for bioanalytical detection are summarized in detail, from 2017 to now. Finally, inspired by the applications of AIECL emitters, relevant prospects and challenges for AIECL sensors are proposed, which is of great significance for exploring more advanced bioanalytical detection technology.

An efficient aggregation-induced electrochemiluminescent immunosensor by using TiO2 nanoparticles as coreaction accelerator and energy donor for aflatoxin B1 detection

Herein, we fabricated a label-free ECL immunosensor for aflatoxin B₁ (AFB₁) detection. In this system, a small organic aggregation-induced electrochemiluminescence luminophore, 2,5-di-tetraphenylethylene-ylthiazolo [5,4-d] thiazole, was designed, named TPETTZ. Polyaniline-wrapped TiO₂ nanoparticles (PANI/TiO₂ NPs) complex was synthesized through one-step in situ oxidation polymerization of aniline, and performed excellent electrical conductivity and abundant amino groups. As an ECL accelerator, TiO₂ nanoparticles (TiO₂ NPs) promoted the oxidation of tri-n-propylamine (TPA) to generate more TPA^•; in addition, it also acted as a donor to improve the ECL intensity of TPETTZ (acceptor) through electrochemiluminescence resonance energy transfer (ECL-RET). Encouraged by the above, under the existence of TPA, TPETTZ displayed a strong and continuously stable ECL_anode signal due to the introduction of PANI/TiO₂ NPs. Therefore, the immunosensor was constructed for AFB₁ detection based on the quenching effect of target on the ECL signal, and a linearly decreasing ECL signal was obtained as the increasement of AFB₁ in the range of 75 fg/mL to 100 ng/mL, with a lower detection limit of 27.5 fg/mL. Moreover, the as-prepared sensing platform performed a satisfactory anti-interference, stability, and reproducibility, and appeared a good accuracy in walnut sample analysis, presenting a promising application in the future.

Partial induced reorientation of 5CB in a liquid crystal microarray and a signal-on sensing assay for the detection of aflatoxin B1

Herein, a signal-on liquid crystal microarray (LCM) sensor is designed for the first time with a micro-spectral optical sensing signal. Depending on the change of the orientation of the LC molecules in the LCM films and the intensity of the spectral peaks of the PhCs, the signal-on LCM biosensor achieves the detection of AFB1 and the Partial Response Mechanism (PSM) of the LCM films is discovered.

Recent advances in the highly sensitive determination of zearalenone residues in water and environmental resources with electrochemical biosensors

Zearalenone (ZEN), a significant class of mycotoxin which is considered as a xenoestrogen, permits, similar to natural estrogens, it's binding to the receptors of estrogen resulting in various reproductive diseases especially, hormonal misbalance. ZEN has toxic effects on human and animal health as a result of its teratogenicity, carcinogenicity, mutagenicity, nephrotoxicity, genotoxicity, and immunotoxicity. To ensure water and environmental resources safety, precise, rapid, sensitive, and reliable analytical and conventional methods can be progressed for the determination of toxins such as ZEN. Different selective nanomaterial-based compounds are used in conjunction with different analytical detection approaches to achieve this goal. The current review demonstrates the state-of-the-art advances of nanomaterial-based electrochemical sensing assays including various sensing, apta-sensing and, immunosensing studies to the highly sensitive determination of various ZEN families. At first, a concise study of the occurrence, structure, toxicity, legislations, and distribution of ZEN in monitoring has been performed. Then, different conventional and clinical techniques and procedures to sensitive and selective sensing techniques have been reviewed and the efficient comparison of them has been thoroughly discussed. This study has also summarized the salient features and the requirements for applying various sensing and biosensing platforms and diverse immobilization techniques in ZEN detection. Finally, we have defined the performance of several electrochemical sensors applying diverse recognition elements couples with nanomaterials fabricated using various recognition elements coupled with nanomaterials (metal NPs, metal oxide nanoparticles (NPs), graphene, and CNT) the issues limiting development, and the forthcoming tasks in successful construction with the applied nanomaterials.

Regulation of Ru(bpy)32+ Electrochemiluminescence Based on Distance-Dependent Electron Transfer of Ferrocene for Dual-Signal Readout Detection of Aflatoxin B1 with High Sensitivity

Ferrocene (Fc) is a common quencher of Ru(bpy)₃²⁺ luminescence. However, interactions between Fc and Ru(bpy)₃²⁺ can be extremely complicated. In this work, we reported the first use of Fc to regulate the electrochemiluminescence (ECL) of Ru(bpy)₃²⁺ by tuning the length of the DNA sequence between Fc and the luminophore of nitrogen-doped graphene quantum dots-Ru(bpy)₃²⁺-doped silica nanoparticles (SiO₂@Ru-NGQDs). The ECL of SiO₂@Ru-NGQDs was depressed when the distance between Ru(bpy)₃²⁺ and Fc was less than 8 nm; a stronger ECL was observed when the distance was more than 12 nm. The switching of the ECL of Ru(bpy)₃²⁺ by Fc was attributed to the electron transfer mechanism, in which Fc participated in the redox of Ru(bpy)₃²⁺ for "signal-off" ECL; this favored electron transfer at the electrode fabricated with an Fc-labeled aptamer (Fc-apt) and SiO₂@Ru-NGQDs for "signal-on" ECL depending on the length of the DNA sequence. Here, a dual-signal readout aptasensor for aflatoxin B1 (AFB1) detection was developed via the enhanced ECL of SiO₂@Ru-NGQDs by Fc-apt. The redox currents of Fc and the ECL of Ru(bpy)₃²⁺ were simultaneously collected as yardsticks, and both decreased with higher concentrations of AFB1. The aptasensor allowed linear ranges of 3 × 10^-5 to 1 × 10² ng mL^-1 for ECL mode and 1 × 10^-3 to 3 × 10³ ng mL^-1 for electrochemical mode. Our work provides insight into the interactions between Fc and Ru(bpy)₃²⁺. The dual-signal readout strategy is a potential platform for the versatile design of aptasensors.

Bipolar (Bio)electroanalysis

This contribution reviews a selection of the most recent studies on the use of bipolar electrochemistry in the framework of analytical chemistry. Despite the fact that the concept is not new, with several important studies dating back to the middle of the last century, completely novel and very original approaches have emerged over the last decade. This current revival illustrates that scientists still (re)discover some exciting virtues of this approach, which are useful in many different areas, especially for tackling analytical challenges in an unconventional way. In several cases, this "wireless" electrochemistry strategy enables carrying out measurements that are simply not possible with classic electrochemical approaches. This review will hopefully stimulate new ideas and trigger scientists to integrate some aspects of bipolar electrochemistry in their work in order to drive the topic into yet unexplored and eventually completely unexpected directions.

Label-free photoelectrochemical immunosensor for aflatoxin B1 detection based on the Z-scheme heterojunction of g-C3N4/Au/WO3

Aflatoxin B1 (AFB1) is the most toxic mycotoxin, is widely found in foods and animal feeds, and can pose a serious threat to our lives. A label-free photoelectrochemical (PEC) immunosensor was fabricated for the sensitive detection of AFB1. A Z-scheme heterojunction of gold nanoparticles (Au NPs) loaded on graphitic carbon nitride sheet and tungsten trioxide sphere composite (g-C₃N₄/Au/WO₃) acted as the highly sensitive platform. The g-C₃N₄/Au/WO₃ is capable, not only of immobilizing antibodies via Au NPs, but also enhancing the separation of electron-hole pairs due to its good energy band matching efficiency. The mechanism of photo-generated electron/hole transfer on g-C₃N₄/Au/WO₃ was explored using scavengers to eliminate active components. On this basis, an electron transfer pathway for the immunosensor was deduced. The PEC immunosensor displayed a linear concentration range from 1.0 pg mL^-1 to 100 ng mL^-1 and a low detection limit of 0.33 pg mL^-1 (S/N = 3) for AFB1. Good reproducibility, stability, and specificity provide a solid foundation for the practical application of this immunosensor.

Electrochemical Biosensors in Food Safety: Challenges and Perspectives

Safety and quality are key issues for the food industry. Consequently, there is growing demand to preserve the food chain and products against substances toxic, harmful to human health, such as contaminants, allergens, toxins, or pathogens. For this reason, it is mandatory to develop highly sensitive, reliable, rapid, and cost-effective sensing systems/devices, such as electrochemical sensors/biosensors. Generally, conventional techniques are limited by long analyses, expensive and complex procedures, and skilled personnel. Therefore, developing performant electrochemical biosensors can significantly support the screening of food chains and products. Here, we report some of the recent developments in this area and analyze the contributions produced by electrochemical biosensors in food screening and their challenges.

Advances in gold nanoparticles for mycotoxin analysis

Mycotoxins are toxic secondary metabolites naturally produced by fungi. They can cause various kinds of acute and chronic diseases in both humans and animals since food usually contains trace amounts of mycotoxins. Thus, it is important to develop a rapid and sensitive technique for mycotoxin detection. Except for the original and classical enzyme-linked immunosorbent assays (ELISA), a series of biosensors has been developed to analyze mycotoxins in food in the last decade with the advantages of rapid analysis, simplicity, portability, reproducibility, stability, accuracy, and low cost. Nanomaterials have been incorporated into biosensors for the purpose of achieving better analytical performance in terms of limit of detection, linear range, analytical stability, low production cost, etc. Gold nanoparticles (AuNPs) are one of the most extensively studied and commonly used nanomaterials, which can be employed as an immobilization carrier, signal amplifier, mediator and mimic enzyme label. This paper aims to present an extensive overview of the recent progress in AuNPs in mycotoxin detection through ELISA and biosensors. The details of the detection methods and their application principles are described, and current challenges and future prospects are discussed as well.

Aggregation-Induced Electrochemiluminescence Immunosensor Based on 9,10-Diphenylanthracene Cubic Nanoparticles for Ultrasensitive Detection of Aflatoxin B1

9,10-Diphenylanthracene cubic nanoparticles (DPA CNPs) with aggregation-induced emission characteristic (AIEgens) were synthesized through a facile reprecipitation method; then, a bright and stable electrochemiluminescence (ECL) signal can be observed when the DPA CNPs were modified at the glassy carbon electrode (GCE) in the presence of Tri-n-propylamine (TPA). This phenomenon is ascribed to the molecules with restricted movement that greatly blocked the energy leakage during the relaxation of the excited state, which facilitated the emission of energy in the form of photons. In addition, the size confinement effect of DPA CNPs in the aggregated state effectively enhanced the ECL emission. The application of DPA CNPs with AIE characteristics in an electrochemiluminescence immunosensor has not been reported. In this contribution, a free-label aggregation-induced electrochemiluminescence immunosensor based on DPA CNPs was fabricated and a simple strategy for ultrasensitive detection of aflatoxin B₁ (AFB₁) was proposed. The ECL signal is quenched linearly in the range of 0.01 pg/mL to 100 ng/mL for AFB₁, and the detection limit is 3 fg/mL. In summary, the prepared sensor exhibits high sensitivity, acceptable accuracy, good anti-interference ability and stability, and satisfactory detection toward AFB₁ in walnut samples. Therefore, the fabricated immunosensor will have significant applications in the fields of food, medicine, and so on.

An innovative prussian blue nanocubes decomposition-assisted signal amplification strategy suitable for competitive lateral flow immunoassay to sensitively detect aflatoxin B1

A prussian blue nanocubes decomposition-assisted signal amplification strategy for competitive lateral flow immunoassay (PBNCD-SALFIA) was innovatively proposed to analyze aflatoxin B₁ (AFB₁) in foodstuffs. The signal was amplified on account of the PBNCs can degrade and fade under alkaline condition, which could weak the color of the test- and control-lines, thereby improving the sensitivity of the sensor. The strategy was technically-simple, just using NaOH as an amplifier can realize signal amplification in the competition assay. Under optimized conditions, the enhanced strip exhibited excellent specificity and sensitivity in AFB₁ monitoring with a detection limit of 23 pg/mL, which was approximately 4- and 8-folds lower than those of PBNCs-LFIA (90 pg/mL) and conventional gold nanoparticles-LFIA (175 pg/mL), respectively. Taking the advantage of the color-fading, this platform revealing the lowest detectable concentration of 0.184, 0.368 and 0.184 μg/kg for AFB₁ in corn, peanut and pumpkin seed within 58 min, separately, showing reliable results.

Photoluminescence label-free immunosensor for the detection of Aflatoxin B1 using polyacrylonitrile/zinc oxide nanofibers

The precise and rapid detection of hazardous molecules, microorganisms, pollutants, and toxins currently remains a global challenge. Aflatoxin B1 (AFB1) is a toxic and dangerous product of fungi that considered as cancerogenic, mutagenic, and immunosuppressive for humans and animals. Therefore, the screening of AFB1 in food and beverages plays an important role in preventing foodborne illnesses. In this study, AFB1 molecules were detected in a microfluidic device with integrated polyacrylonitrile/zinc oxide (PAN/ZnO) nanofibers fabricated via a combination of the electrospinning, and atomic layer deposition (ALD) techniques. The structural and optical analyses of PAN/ZnO nanofibers were performed and samples with the most suitable properties were utilized for AFB1 detection. In order to obtain the biorecognition layer towards AFB1, PAN/ZnO samples were modified by (3-Aminopropyl) triethoxysilane (APTES), and glutaraldehyde (GA), bovine serum albumin (BSA) and monoclonal antibodies (Anti-AFB1). Subsequently, photoluminescence (PL)-based immunosensor was integrated into a microfluidic cell and tested for AFB1 detection. The mechanism of PL changes caused by AFB1 & Anti-AFB1 complex formation was analyzed and developed. The proposed approach enables the detection of AFB1 with the lowest concentration (LOD) of about 39 pg/ml, while the sensitivity range was evaluated as 0.1-20 ng/ml. The obtained values of LOD and sensitivity, as well as the simplicity of the detection method, make this approach a prospect for further application.

Highly sensitive and selective aflatoxin B1 biosensor based on Exonuclease I-catalyzed target recycling amplification and targeted response aptamer-crosslinked hydrogel using electronic balances as a readout

The biosensors based on aptamer based stimuli-responsive hydrogels have the characters of high specificity, good stability, portability. Electronic balance is one of the most accurate equipment and can be reached nearly in all labs. Aflatoxin B₁ (AFB₁) is highly toxic and carcinogenic to humans and animals, it is necessary to develop simple and convenient detection method to apply in resource limited area. In this study, a novel strategy for quantitative detection of AFB₁ has been developed by combining the high selectivity and convenient of target-responsive hydrogel and the simple of using electronic balance as readout devices. The AFB₁ target responsive double crosslinked hydrogel has been constructed using linear hyaluronic acid grafted single-stranded DNA complex as the backbone, AFB₁ aptamer and polyethyleneimine as crosslinkers. And platinum nanoparticles (PtNPs) had been embedded in the hydrogel firstly. The present of AFB₁ can bind with the aptamer with high affinity and cause the releasing of aptamer from hydrogel. The addition of Exo I can specifically recognize and cleave the aptamer in AFB₁-aptamer complex, resulting in the releasing of AFB₁, which can react with the hydrogel again, thereby achieving the target cycle. By this means, the hydrogel will collapse and many pre-embedded PtNPs can be released. The transferring of the released PtNPs to a drainage device which contains H₂O₂ can results in the increasing of the internal pressure since the production of oxygen through the catalytic decomposition of H₂O₂ by PtNPs has low solubility. Which will cause the discharging of water from the system and this can be collected and weighed by an electronic balance easily. The weight of water has a linear relationship with AFB₁ concentration. Under 30 min catalytic time, the linear range is 31.2 μg/kg - 6.2 mg/kg with the detection limit of 9.4 μg/kg (S/N = 3). The proposed method was successfully applied to the detection of AFB₁ in peanut samples.