Design and application of proximity hybridization-based multiple stimuli-responsive immunosensing platform for ovarian cancer biomarker detection

Highly integrated and compact transduction strategy for multidimensional sensing: Near infrared light mediated transmission of optical, electrical and visual signals for ovarian cancer marker assay

Mediating effective signal conversion strategies through intermediate parameters to develop easily integrated smart sensing platforms remains a challenge. Herein, a compact and miniaturized optical, electrical and visual sensor was constructed through reasonably designing and assembling three sub-sensors, which can simultaneously and independently feedback signal changes brought by near-infrared (NIR) light. Concretely, the thermal effect induced by multifunctional V2C MQDs@polyaniline@NiFe2O4 with excellent photothermal performance was employed to regulate the signal output of luminescence, color and resistance in multilayer sensing chip, which the chip was formed by attaching thermochromic paper and thermoelectric module layer-by-layer to the nonconductive backside of transparent indium tin oxide electrode modified with electrochemiluminescent (ECL) signal probe. Additionally, the pleasant luminescent property of V2C MQDs and outstanding electrocatalytic ability of NiFe2O4 endowed this probe with another role in providing highly sensitive ECL signal transduction. As a result, the multifunctional probe could convert light into thermal energy under the NIR light irradiation, realizing temperature enhanced ECL response, temperature initiated chameleon paper (CoCl2·6H2O) with thermochromic behavior for intuitive temperature visualization output and thermoelectrical module for high-resolution resistance analysis. Ultimately, the photomodulated multimode sensing platform realized sensitive lipolysis stimulated lipoprotein receptor detection with a wide linear range from 10-6 to 10 ng/mL, excellent selectivity, good stability and high accuracy. The successful application of intermediate parameter driving and crosstalk-free multidimensional signal processing, offering an innovative regulating strategy for promoting the development of multifunctional signal conversion devices.

Modern Emerging Biosensing Methodologies for the Early Diagnosis and Screening of Ovarian Cancer

Ovarian cancer (OC) is one of the leading causes of gynecological cancer-related death worldwide. Late diagnosis at advanced stages of OC is the reason for a higher mortality rate. Earlier diagnosis and proper treatment are important for improving the prognosis of OC patients. Biosensors offer accurate, low-cost, rapid, and user-friendly devices that can be employed for the detection of OC-specific biomarkers in the early stage. Therefore, it is important to consider the potential biomarkers in the biological fluids to confirm the OC prognosis. Out of many biomarkers, the most commonly tested clinically is cancer antigen 125 (CA-125). However, CA-125 is considered to be a poor biomarker for OC diagnosis. Several biosensing methods were developed for the sensitive and quantitative detection of each biomarker. In abnormal expression in OC patients, nucleic acids, enzymes, cells, and exosomes are used as target biomarkers for the construction of biosensors. This review focuses on the development for the detection of various biomarkers using multiple biosensing methods. Here, we describe the origin and the significance of OC-associated biomarkers, the working principle of biosensors, and the classification of biosensors based on their recognition elements and signal transducers. The modes of detection and sensitivity of the sensors are discussed. Finally, the challenges in the fabrication, obstacles in the clinical application, and future prospects are discussed.

Nanozyme-Enabled Biomedical Diagnosis: Advances, Trends, and Challenges

As nanoscale materials with the function of catalyzing substrates through enzymatic kinetics, nanozymes are regarded as potential alternatives to natural enzymes. Compared to protein-based enzymes, nanozymes exhibit attractive characteristics of low preparation cost, robust activity, flexible performance adjustment, and versatile functionalization. These advantages endow them with wide use from biochemical sensing and environmental remediation to medical theranostics. Especially in biomedical diagnosis, the feature of catalytic signal amplification provided by nanozymes makes them function as emerging labels for the detection of biomarkers and diseases, with rapid developments observed in recent years. To provide a comprehensive overview of recent progress made in this dynamic field, here an overview of biomedical diagnosis enabled by nanozymes is provided. This review first summarizes the synthesis of nanozyme materials and then discusses the main strategies applied to enhance their catalytic activity and specificity. Subsequently, representative utilization of nanozymes combined with biological elements in disease diagnosis is reviewed, including the detection of biomarkers related to metabolic, cardiovascular, nervous, and digestive diseases as well as cancers. Finally, some development trends in nanozyme-enabled biomedical diagnosis are highlighted, and corresponding challenges are also pointed out, aiming to inspire future efforts to further advance this promising field.

H2O2-Activatable Liposomal Nanobomb Capable of Generating Hypoxia-Irrelevant Alkyl Radicals by Photo-Triggered Cascade Reaction for High-Performance Elimination of Biofilm Bacteria

High H2O2 levels are widely present at the infection sites or in the biofilm microenvironment. Herein, hemin with peroxidase-like catalytic activity and its substrate, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), are simultaneously introduced into a liposomal nanoparticle containing thermosensitive 2,2'-azobis[2-(2-imidazolin-2-yl) propane] dihydrochloride (AIBI)-loaded bovine serum albumin (BAG), rationally constructing an H2O2-activatable liposomal nanobomb (Lipo@BHA) for combating biofilm-associated bacterial infections with high performance. In the presence of H2O2, hemin can catalyze the conversion of ABTS into its oxidized form (ABTS·+) with strong near-infrared (NIR) absorption, which produces photonic hyperpyrexia to cause the decomposition of AIBI into oxygen-independent alkyl radicals (·R) and nitrogen (N2) microbubbles. The former not only directly damage bacterial cells but also significantly accelerates the oxidization of ABTS to ABTS·+ for augmenting photothermal-triggered generation of ·R. Interestingly, the released N2 can induce transient cavitation to rupture lysosomal nanoparticle and improve the biofilm permeability, thereby enhancing the antibiofilm effect of Lipo@BHA. The proposed Lipo@BHA exhibits satisfactory multi-mode combination antibacterial properties. Through endogenous H2O2-activated cascade reaction, Lipo@BHA achieves remarkable hypoxia-irrelevant ·R therapy of biofilm-associated wound infections with low cytotoxicity and good in vivo biosafety. Therefore, this work presents a versatile H2O2-activatable cascade ·R generation strategy for biofilm-specific therapeutic applications.

Overview of the Design and Application of Photothermal Immunoassays

Developing powerful immunoassays for sensitive and real-time detection of targets has always been a challenging task. Due to their advantages of direct readout, controllable sensing, and low background interference, photothermal immunoassays have become a type of new technology that can be used for various applications such as disease diagnosis, environmental monitoring, and food safety. By modification with antibodies, photothermal materials can induce temperature changes by converting light energy into heat, thereby reporting specific target recognition events. This article reviews the design and application of photothermal immunoassays based on different photothermal materials, including noble metal nanomaterials, carbon-based nanomaterials, two-dimensional nanomaterials, metal oxide and sulfide nanomaterials, Prussian blue nanoparticles, small organic molecules, polymers, etc. It pays special attention to the role of photothermal materials and the working principle of various immunoassays. Additionally, the challenges and prospects for future development of photothermal immunoassays are briefly discussed.

Overview of the Design and Application of Dual-Signal Immunoassays

Immunoassays have been widely used for the determination of various analytes in the fields of disease diagnosis, food safety, and environmental monitoring. Dual-signal immunoassays are now advanced and integrated detection technologies with excellent self-correction and self-validation capabilities. In this work, we summarize the recent advances in the development of optical and electrochemical dual-signal immunoassays, including colorimetric, fluorescence, surface-enhanced Raman spectroscopy (SERS), electrochemical, electrochemiluminescence, and photoelectrochemical methods. This review particularly emphasizes the working principle of diverse dual-signal immunoassays and the utilization of dual-functional molecules and nanomaterials. It also outlines the challenges and prospects of future research on dual-signal immunoassays.

Metal nanozymes modulation of reactive oxygen species as promising strategies for cancer therapy

Nanozymes, nanostructured materials emulating natural enzyme activities, exhibit potential in catalyzing reactive oxygen species (ROS) production for cancer treatment. By facilitating oxidative reactions, elevating ROS levels, and influencing the tumor microenvironment (TME), nanozymes foster the eradication of cancer cells. Noteworthy are their superior stability, ease of preservation, and cost-effectiveness compared to natural enzymes, rendering them invaluable for medical applications. This comprehensive review intricately explores the interplay between ROS and tumor therapy, with a focused examination of metal-based nanozyme strategies mitigating tumor hypoxia. It provides nuanced insights into diverse catalytic processes, mechanisms, and surface modifications of various metal nanozymes, shedding light on their role in intra-tumoral ROS generation and applications in antioxidant therapy. The review concludes by delineating specific potential prospects and challenges associated with the burgeoning use of metal nanozymes in future tumor therapies.

Multimodal biosensing systems based on metal nanoparticles

Biosensors are currently among the most commonly used devices for analysing biomarkers and play an important role in environmental detection, food safety, and disease diagnosis. Researchers have developed multimodal biosensors instead of single-modal biosensors to meet increasing sensitivity, accuracy, and stability requirements. Metal nanoparticles (MNPs) are beneficial for preparing core probes for multimodal biosensors because of their excellent physical and chemical properties, such as easy regulation and modification, and because they can integrate diverse sensing strategies. This review mainly summarizes the excellent physicochemical properties of MNPs applied as biosensing probes and the principles of commonly used MNP-based multimodal sensing strategies. Recent applications and possible improvements of multimodal biosensors based on MNPs are also described, among which on-site inspection and sensitive detection are particularly important. The current challenges and prospects for multimodal biosensors based on MNPs may provide readers with a new perspective on this field.

Self-reduced MXene-Metal interaction electrochemiluminescence support with synergistic electrocatalytic and photothermal effects for the bimodal detection of ovarian cancer biomarkers

Novel two-dimensional MXene with unique optical and electrical properties has become a new focus in the field of sensing. In particular, their metallic conductivity, good biocompatibility and high anchoring ability to biomaterials make them attractive candidates. Despite such remarkable properties, there are certain limitations, such as low oxidative stability. MXene-Metal interactions are an effective strategy to maintain the long-term stability of MXene, while also improving the electrochemical activity and optical properties. Herein, a series of MXene/Ag nanocomposites including Ti3C2/Ag, Nb2C/Ag and V2C/Ag were designed based on the surface chemistry characteristics of MXene, where MXene served as the substrate for in-situ growth of silver nanoparticles via self-reduction of Ag(NH3)2+. The results showed that V2C MXene has the strongest self-reducing ability due to its multiple variable valence states, larger interlayer space and more reactive groups. Moreover, V2C/Ag exhibited unexpected oxygen reduction reaction catalytic activity and photothermal performance. In view of which, an electrochemiluminescence-photothermal (ECL-photothermal) immunosensor was developed using V2C/Ag as ECL anchor and photothermal reagent for ultrasensitive detection of Lipolysis stimulated lipoprotein receptor. This work not only provides a simple and effective synthesis method of MXene supported metal nanocomposites, but also provides more inspirations for exploring the efficient biosensing strategies.

Triblock PolyA-Mediated Protein Biosensor Based on a Size-Matching Proximity Hybridization Analysis

The antibodies in the natural biological world utilize bivalency/multivalency to achieve a higher affinity for antigen capture. However, mimicking this mechanism on the electrochemical sensing interface and enhancing biological affinity through precise spatial arrangement of bivalent aptamer probes still pose a challenge. In this study, we have developed a novel self-assembly layer (SAM) incorporating triblock polyA DNA to enable accurate organization of the aptamer probes on the interface, constructing a "lock-and-key-like" proximity hybridization assay (PHA) biosensor. The polyA fragment acts as an anchoring block with a strong affinity for the gold surface. Importantly, it connects the two DNA probes, facilitating one-to-one spatial proximity and enabling a controllable surface arrangement. By precisely adjusting the length of the polyA fragment, we can tailor the distance between the probes to match the molecular dimensions of the target protein. This design effectively enhances the affinity of the aptamers. Notably, our biosensor demonstrates exceptional specificity and sensitivity in detecting PDGF-BB, as confirmed through successful validation using human serum samples. Overall, our biosensor presents a novel and versatile interface for proximity assays, offering a significantly improved surface arrangement and detection performance.

Optically active two-dimensional MoS2-based nanohybrids for various biosensing applications: A comprehensive review

Following the discovery of graphene, there has been a surge in exploring other two-dimensional (2D) nanocrystals, including MoS2. Over the past few decades, MoS2-based nanocrystals have shown great potential applications in biosensing, owing to their excellent physico-chemical properties. Unlike graphene, MoS2 shows layer-dependent finite band gaps (∼1.8 eV for a single layer and ∼1.2 for bulk) and relatively strong interaction with the electromagnetic spectrum. The tunability of the size, shape, and intrinsic properties, such as high optical absorption, electron mobility, mechanical strength and large surface area, of MoS2 nanocrystals, make them excellent alternative probe materials for preparing optical, photothermal, and electrical bio/immunosensors. In this review, we will provide insights into the rapid evolutions in bio/immunosensing applications based on MoS2 and its nanohybrids. We emphasized the various synthesis, characterization, and functionalization routes of 2D MoS2 nanosheets/nanoflakes. Finally, we discussed various fabrication techniques and the critical parameters, including the limit of detection (LOD), linear detection range, and sensitivity of the biosensors. In addition, the role of MoS2 in enhancing the performance of biosensors, the limitations associated with current biosensing technologies, future challenges, and clinical implications are addressed. The advantages/disadvantages of each biosensor technique are also summarized. Collectively, we believe that this review will encourage resolute researchers to follow up further with the state-of-the-art MoS2-based biosensing technology.

Ag/MoO3–Pd-mediated gasochromic reaction: An efficient dual-mode photoelectrochemical and photothermal immunoassay

Herein, we presented a dual-readout gasochromic immunosensing platform for accurate and sensitive detection of carcinoembryonic antigen (CEA) based on Ag-doped/Pd nanoparticles loaded MoO₃ nanorods (Ag/MoO₃-Pd). Initially, the presence of analyte CEA would prompt the formation of sandwich-type immunoreaction, accompanied by the introduction of Pt NPs labeled on detection antibody. Upon the addition of NH₃BH₃, the product hydrogen (H₂) will interact with Ag/MoO₃-Pd as a bridge between the sensing interface and the biological assembly platform. Both photocurrent and temperature signals can serve as readouts due to the significantly increased PEC performance and enhanced photothermal conversion capability of H-Ag/MoO₃-Pd (the product of Ag/MoO₃-Pd react with H₂) compared to Ag/MoO₃-Pd. In addition, the DFT results show that the band gap of Ag/MoO₃-Pd becomes narrower after the reaction with H₂, thus improving the utilization of light, which theoretically explains the internal mechanism of gas sensing reaction. Under optimal conditions, the designed immunosensing platform showed good sensitivity for CEA detection with the limit of detection (LOD) of 26 pg mL^-1 (photoelectrochemical mode) and 98 pg mL^-1 (photothermal mode). This work not only presents the possible reaction mechanism of Ag/MoO₃-Pd and H₂, but also creatively applicate it in photothermal biosensors that give a new path for devising dual-readout immunosensor.

Facile and portable multimodal sensing platform driven by photothermal-controlled release system for biomarker detection

Portable, maneuverable and reliable versatile-integrated analytical devices are urgently demanded but still extremely challenging to meet the requirements of point-of-care testing in resource-limited areas. Herein, a multifunctional sensing platform with excellent photothermal performance was implanted into the miniature zone of a paper-based electrochemiluminescent (ECL) biosensor for accurate detection of interleukin-6, which could flexibly interconnect the visualized distance and temperature readout with ultrasensitive ECL response. Concretely, the multipurpose MBene and TaSe₂ composites (MBene@TaSe₂) prepared via self-assembly approach as target-associated photothermal element was introduced in the paper-based analytical device (PAD) and served as multi-signals trigger. Under the laser irradiation, MBene@TaSe₂ probe not only generated heat for rapid temperature output, but also triggered the phase transition behavior of thermoresponsive poly (N-isopropylacrylamide) (pNIPAM) hydrogel to release loaded malachite green (MG) dye for distance-based visual readout. Simultaneously, the released MG was also utilized as effective quencher to decrease the ECL signal of luminol. Benefitting from this dexterous architecture, the speedy preliminary screening and precise quantitative analysis could be subsequently obtained in single-drop sample through one-step sandwich immunoreaction, which avoids additional separation operations and greatly simplifies the analysis procedure. Undeniably, this work provides ingenious insights for advancing the development of convenient and fast multifunction-integrated PAD in family surveillance and intelligent diagnosis.

Smartphone-based microplate reader for high-throughput quantitation of disease markers in serum

Herein, a smartphone-based portable reader with integrated optics for standard microtiter plates (96 wells) has been designed and demonstrated for high-throughput quantitation of validated biomarkers in serum. The customized optical attachment was simply constructed with a convex lens and a light source, by which the transmitted light through a 96-well microtiter plate was converged for imaging with a smartphone, so that accurate and wide-range reading of the plate can be achieved. More importantly, relying on the digitized colorimetric analysis of the obtained images, concentrations of various biomarkers can be determined directly using the customized mobile app. A set of validated biomarkers for inflammation and infection, C-reactive protein (CRP), serum amyloid A (SAA), and procalcitonin (PCT) have been quantitated with this new system; both the response ranges and limits of detection meet the requirement of clinical tests. The consistency with the results obtained using a commercial microplate reader proves its reliability and precision, augments its potential as a point-of-care diagnostic device for on-site testing or resource-limited settings.

Recent Advances in the Immunoassays Based on Nanozymes

As a rapid and simple method for the detection of multiple targets, immunoassay has attracted extensive attention due to the merits of high specificity and sensitivity. Notably, enzyme-linked immunosorbent assay (ELISA) is a widely used immunoassay, which can provide high detection sensitivity since the enzyme labels can promote the generation of catalytically amplified readouts. However, the natural enzyme labels usually suffer from low stability, high cost, and difficult storage. Inspired by the advantages of superior and tunable catalytic activities, easy preparation, low cost, and high stability, nanozymes have arisen to replace the natural enzymes in immunoassay; they also possess equivalent sensitivity and selectivity, as well as robustness. Up to now, various kinds of nanozymes, including mimic peroxidase, oxidase, and phosphatase, have been incorporated to construct immunosensors. Herein, the development of immunoassays based on nanozymes with various types of detection signals are highlighted and discussed in detail. Furthermore, the challenges and perspectives of the design of novel nanozymes for widespread applications are discussed.

Molybdenum Disulfide-Based Nanoprobes: Preparation and Sensing Application

The use of nanoprobes in sensors is a popular way to amplify their analytical performance. Coupled with two-dimensional nanomaterials, nanoprobes have been widely used to construct fluorescence, electrochemical, electrochemiluminescence (ECL), colorimetric, surface enhanced Raman scattering (SERS) and surface plasmon resonance (SPR) sensors for target molecules' detection due to their extraordinary signal amplification effect. The MoS₂ nanosheet is an emerging layered nanomaterial with excellent chemical and physical properties, which has been considered as an ideal supporting substrate to design nanoprobes for the construction of sensors. Herein, the development and application of molybdenum disulfide (MoS₂)-based nanoprobes is reviewed. First, the preparation principle of MoS₂-based nanoprobes was introduced. Second, the sensing application of MoS₂-based nanoprobes was summarized. Finally, the prospect and challenge of MoS₂-based nanoprobes in future were discussed.

Transition Metal Dichalcogenides (TMDC)-Based Nanozymes for Biosensing and Therapeutic Applications

Nanozymes, a type of nanomaterial with enzyme-like properties, are a promising alternative to natural enzymes. In particular, transition metal dichalcogenides (TMDCs, with the general formula MX2, where M represents a transition metal and X is a chalcogen element)-based nanozymes have demonstrated exceptional potential in the healthcare and diagnostic sectors. TMDCs have different enzymatic properties due to their unique nano-architecture, high surface area, and semiconducting properties with tunable band gaps. Furthermore, the compatibility of TMDCs with various chemical or physical modification strategies provide a simple and scalable way to engineer and control their enzymatic activity. Here, we discuss recent advances made with TMDC-based nanozymes for biosensing and therapeutic applications. We also discuss their synthesis strategies, various enzymatic properties, current challenges, and the outlook for future developments in this field.

A novel electrochemical sensor based on process-formed laccase-like catalyst to degrade polyhydroquinone for tumor marker

Methods to improve the sensitivity of electrochemical sensors based on catalytic reactions generally require adscititious or pre-modified catalysts, which make the sensitive detection of sensors extremely challenging. This is because the activity of the catalyst is susceptible to the storage and modification process, such as aggregation during storage or loss of active sites during multi-step modification, which impairs the performance of the sensor. To solve this thorny issue, a novel electrochemical sensor based on a process-formed laccase-like catalyst was constructed for sensitive detection of tumor markers. Cu²⁺-polydopamine (CuPDA) combined with antibody (Ab₂) were employed as copper-containing immunoprobe, which released Cu(Ⅱ) ions under acidic stimulation. Cu(Ⅱ) ions coordinate with the self-assembly cationic diphenylalanine-glutaraldehyde nanospheres (CDPGA) to form a laccase-like catalyst, which had stronger catalytic activity than laccase. The freshly formed catalyst was immediately used to degrade the polyhydroquinone-reduced graphene oxide (PHQ-rGO) composite, resulting in a significant reduction in the current signal. The PHQ-rGO composite plays dual roles of signal substance and substrate on the sensing interface. The proposed electrochemical sensor demonstrated wide linearity for the determination of a model analyte, human epididymis protein 4 (HE4), from 1 pg mL^-1 to 100 ng mL^-1, and the detection limit was as low as 0.302 pg mL^-1 (S/N = 3), which had good consistency with that of electrochemiluminescence method. This process-formed catalyst approach will have potential reference significance for the construction of other sensors.

MoS2-based nanocomposites for cancer diagnosis and therapy

Molybdenum is a trace dietary element necessary for the survival of humans. Some molybdenum-bearing enzymes are involved in key metabolic activities in the human body (such as xanthine oxidase, aldehyde oxidase and sulfite oxidase). Many molybdenum-based compounds have been widely used in biomedical research. Especially, MoS2-nanomaterials have attracted more attention in cancer diagnosis and treatment recently because of their unique physical and chemical properties. MoS2 can adsorb various biomolecules and drug molecules via covalent or non-covalent interactions because it is easy to modify and possess a high specific surface area, improving its tumor targeting and colloidal stability, as well as accuracy and sensitivity for detecting specific biomarkers. At the same time, in the near-infrared (NIR) window, MoS2 has excellent optical absorption and prominent photothermal conversion efficiency, which can achieve NIR-based phototherapy and NIR-responsive controlled drug-release. Significantly, the modified MoS2-nanocomposite can specifically respond to the tumor microenvironment, leading to drug accumulation in the tumor site increased, reducing its side effects on non-cancerous tissues, and improved therapeutic effect. In this review, we introduced the latest developments of MoS2-nanocomposites in cancer diagnosis and therapy, mainly focusing on biosensors, bioimaging, chemotherapy, phototherapy, microwave hyperthermia, and combination therapy. Furthermore, we also discuss the current challenges and prospects of MoS2-nanocomposites in cancer treatment.

Nanobody-based immunosensing methods for safeguarding public health

Immunosensing methods are biosensing techniques based on specific recognition of an antigen-antibody immunocomplex, which have become commonly used in safeguarding public health. Taking advantage of antibody-related biotechnological advances, the utilization of an antigen-binding fragment of a heavy-chain-only antibody termed as 'nanobody' holds significant biomedical potential. Compared with the conventional full-length antibody, a single-domain nanobody retaining cognate antigen specificity possesses remarkable physicochemical stability and structural adaptability, which enables a flexible and efficient molecular design of the immunosensing strategy. This minireview aims to summarize the recent progress in immunosensing methods using nanobody targeting tumor markers, environmental pollutants, and foodborne microbes.

Synergistic Effect of PVDF-Coated PCL-TCP Scaffolds and Pulsed Electromagnetic Field on Osteogenesis

Bone exhibits piezoelectric properties. Thus, electrical stimulations such as pulsed electromagnetic fields (PEMFs) and stimuli-responsive piezoelectric properties of scaffolds have been investigated separately to evaluate their efficacy in supporting osteogenesis. However, current understanding of cells responding under the combined influence of PEMF and piezoelectric properties in scaffolds is still lacking. Therefore, in this study, we fabricated piezoelectric scaffolds by functionalization of polycaprolactone-tricalcium phosphate (PCL-TCP) films with a polyvinylidene fluoride (PVDF) coating that is self-polarized by a modified breath-figure technique. The osteoinductive properties of these PVDF-coated PCL-TCP films on MC3T3-E1 cells were studied under the stimulation of PEMF. Piezoelectric and ferroelectric characterization demonstrated that scaffolds with piezoelectric coefficient d33 = -1.2 pC/N were obtained at a powder dissolution temperature of 100 °C and coating relative humidity (RH) of 56%. DNA quantification showed that cell proliferation was significantly enhanced by PEMF as low as 0.6 mT and 50 Hz. Hydroxyapatite staining showed that cell mineralization was significantly enhanced by incorporation of PVDF coating. Gene expression study showed that the combination of PEMF and PVDF coating promoted late osteogenic gene expression marker most significantly. Collectively, our results suggest that the synergistic effects of PEMF and piezoelectric scaffolds on osteogenesis provide a promising alternative strategy for electrically augmented osteoinduction. The piezoelectric response of PVDF by PEMF, which could provide mechanical strain, is particularly interesting as it could deliver local mechanical stimulation to osteogenic cells using PEMF.

Dual-readout proximity hybridization-regulated and photothermally amplified protein analysis based on MXene nanosheets

Herein, an ingenious dual-readout sensing platform based on a proximity hybridization-regulated strategy is proposed for protein detection. For the first time, Ti₃C₂ MXene@thionine composites (MXene@Thi) with an excellent photothermal effect not only acted as an amplifier to enhance the electrochemical signal, but were also used as a converter to achieve the temperature readout.

Simple and rapid nicotine analysis using a disposable silica nanochannel-assisted electrochemiluminescence sensor

Nicotine analysis is essential to medicine, toxicology and the tobacco industry. However, no simple, portable and disposable method was developed to meet their demands. Here, we report a simple, rapid and disposable silica nanochannel (SAN)-based electrochemiluminescence (ECL) sensor for nicotine analysis by simply assembling a SAN electrode with a paper cover. The sensing principle of the disposable sensor is based on the size exclusion effect and charge selectivity, which obviously prolong the sensor service time. We find that the sensor exhibits good specificity to nicotine, and most of the complex matrices are unlikely to impact the detection. The performance of the disposable sensor in cigarettes, e-cigarettes, nicotine gums, and lozenges is fully validated, showing satisfactory linearity, sensitivity (a limit of detection of 27.82 nM), and accuracy (a recovery between 96.00% and 106.51%). The disposable sensor can be potentially applied for on-site nicotine analysis.