Self-powered aptasensing for prostate specific antigen based on a membraneless photoelectrochemical fuel cell

Ultrasensitive Detection of Prostate Specific Antigen by an Unlabeled Fluorescence Aptasensor Based on the AIE Effect

The accurate and sensitive detection of prostate specific antigen (PSA) is vital for the early diagnosis and treatment of prostate cancer. To this end, an unlabeled fluorescent aptasensor was constructed by using a novel Compound B {1,1'-(1,4-phenylene) bis(3-ethyl-1H-imidazol-3-ium) iodide} with aggregation-induced emission (AIE) activity as a fluorescence signal and NH2-Fe3O4 particle as an adsorption platform. Compound B could combine with prostate specific antigen aptamers (PSA-Apt) to form a PSA-Apt/B complex, which further generated the AIE effect. Then, PSA was added to the PSA-Apt/B solution. PSA combined with PSA-Apt/B to form the PSA-Apt/B/PSA complex. Next, NH2-Fe3O4 magnetic particles were added to the solution. Given that PSA-Apt/B/PSA would no longer combine with NH2-Fe3O4 magnetic particles, the PSA-Apt/B/PSA complex remained in the supernate after magnet separation, and the supernate showed strong fluorescence (I). When no PSA was added to the PSA-Apt/B solution, PSA-Apt/B could combine with NH2-Fe3O4 magnetic particles and would be sucked into the bottom of the test tube by magnet, and the supernate would show weak fluorescence (I0). Result showed that the difference between the above-mentioned two fluorescence values (∆I = I - I0) had an excellent linear relationship with the PSA concentration within the concentration range of 0.01-10 ng/mL, and its limit of detection was 3 pg/mL (S/N = 3). In addition, the sensor has high accuracy and can be directly used to test PSA in actual serum samples.

Aptamers capable of simultaneously identifying multiple targets and corresponding applications in medical diagnosis-A review

Aptamers, a unique class of nucleic acid sequences recognized for their specific binding capabilities, have found widespread application in biomedical field. While traditional aptamers are typically designed to target a single molecule recognition, recent attention has been directed towards multifunctional aptamers capable of simultaneously identifying multiple targets. In this review, the latest advancements in multifunctional aptamers and their applications in medical diagnosis are presented for the first time. This review focuses on the following essential aspects, including methods employed for developing multifunctional aptamers, detailed characteristics of these aptamers, practical applications across diverse diagnostic scenarios, and in-depth discussions on critical aspects of their design and utility. To conclude, future perspectives are provided to drive further development and broader application of multifunctional aptamers in the biomedical domain.

Three-dimensional titania arrays coupled with dopamine for visible-light-induced photoelectrochemical sensing

Three-dimensional TiO2 hierarchical nanowire arrays were synthesized featuring nanocavities via a hydrogen peroxide-assisted wet chemical reaction, followed by a simple liquid-phase deposition process. We subsequently decorated the TiO2 arrays with dopamine, leveraging its enediol ligand for chelation. Reduced nicotinamide adenine dinucleotide (NADH), a cofactor for over 300 dehydrogenases, serves as the targeted analyte to assess the PEC sensing performance of the sensor. The developed sensor exhibited a linear concentration range for NADH detection of 0.05 to 50 µM, achieving a high sensitivity of 0.29 μA∙μM-1∙cm-2 and a low detection limit of 0.03 μM (signal-to-noise ratio of 3). Notably, PEC performance of the resulting sensor surpassed that of commercial TiO2 (P25)-based sensors. The enhanced sensing capabilities can be attributed to several factors: the TiO2 hierarchical nanowire arrays with nanocavities provide a larger surface area, abundant active sites, and shorter molecular diffusion lengths for surface adsorption and reaction, thereby reducing response times and improving sensitivity. Additionally, the coupling of TiO2 with dopamine enhances visible light absorption and optimizes charge transfer dynamics. These findings open a new avenue for designing high-performance three-dimensional nanoarchitectures for PEC sensing applications.

Self-powered photoelectrochemical sensor based on molecularly imprinted polymer-coupled CBFO photocathode and Ag2S/SnS2 photoanode for ultrasensitive dimethoate sensing

Dimethoate (DIM) is one of the most extensively applied organophosphorus pesticides (OPs), which is used to boost farm productivity due to its high insecticidal efficacy. However, the excessive use of DIM can result in the extensive contamination of soil, groundwater and food. Monitoring of DIM in environmental and food samples is crucial in view of its potential health risks and environmental hazards from excessive residues. The expensive equipment and complex operations for current detection methods greatly limit their practical applications. Herein, a self-powered photoelectrochemical (PEC) sensing platform based on Ag2S/SnS2 photoanode, iron-doped cobalt borate (CBFO) photocathode, and molecularly imprinted polymers (MIPs) was proposed for the detection of DIM. The molecularly imprinted polymers at CBFO photocathode endow the self-powered PEC sensor with high selectivity. The Ag2S/SnS2 photoanode enhances the efficient of electron transfer between the photoanode and photocathode, contributing to the high sensitivity of PEC sensor. The self-powered molecularly imprinted PEC sensor exhibits outstanding sensitivity and selectivity for DIM at concentrations from 1 × 10-2 to 1 × 105 nM with a detection limit of 5.9 pM. Excellent recoveries (95.4 ± 2.6 %, 98.4 ± 2.3 %, 106.3 ± 3.3 %) were achieved in spiked crown pear samples, indicating that the molecularly imprinted PEC sensor is capable of detecting DIM in real samples. This research provides a novel simple, fast, highly selective and sensitive self-powered molecularly imprinted photoelectrochemical sensing platform for detection of DIM. The fabricated PEC sensor offers a promising candidate for the detection method of organophosphorus pesticides residues, which is of great significance for the fields of food safety and environmental protection.

Emerging Roles of Graphitic Carbon Nitride-based Materials in Biomedical Applications

Graphite carbon nitride (g-C3N4) is a two-dimensional conjugated polymer with a unique energy band structure similar to graphene. Due to its outstanding analytical advantages, such as relatively small band gap (2.7 eV), low-cost synthesis, high thermal stability, excellent photocatalytic ability, and good biocompatibility, g-C3N4 has attracted the interest of researchers and industry, especially in the medical field. This paper summarizes the latest research on g-C3N4-based composites in various biomedical applications, including therapy, diagnostic imaging, biosensors, antibacterial, and wearable devices. In addition, the application prospects and possible challenges of g-C3N4 in nanomedicine are also discussed in detail. This review is expected to inspire emerging biomedical applications based on g-C3N4.

Self-powered biosensing platform for Highly sensitive detection of soluble CD44 protein

In this study, a self-powered biosensor based on an enzymatic biofuel cell was proposed for the first time for the ultrasensitive detection of soluble CD44 protein. The as-prepared biosensor was composed of the co-exist aptamer and glucose oxidase bioanode and bilirubin oxidase modified biocathode. Initially, the electron transfer from bioanode to biocathode was hindered due to the presence of the aptamer with high insulation, generating a low open-circuit voltage (EOCV). Once the target CD44 protein was present, it was recognized and captured by the aptamer at the bioanode, thus the interaction between the target CD44 protein and the immobilized aptamer caused the structural change at the surface of the electrode, which facilitated the transfer of electrons. The EOCV showed a good linear relationship with the logarithm of the CD44 protein concentrations in the range of 0.5-1000 ng mL-1 and the detection limit was 0.052 ng mL-1 (S/N = 3). The sensing platform showed excellent anti-interference performance and outstanding stability that maintained over 97% of original EOCV after 15 days. In addition, the relative standard deviation (1.40-1.96%) and recovery (100.23-101.31%) obtained from detecting CD44 protein in real-life blood samples without special pre-treatment indicated that the constructed biosensor had great potential for early cancer diagnosis.

Recent Trends in Self-Powered Photoelectrochemical Sensors: From the Perspective of Signal Output

Revolutionary developments in analytical chemistry have led to the rapid development of self-powered photoelectrochemical (PEC) sensors. Different from conventional PEC sensors, self-powered PEC sensors do not require an external power source or complex devices for the sensitive detection of targets. As a result, these sensors have enormous application potential for the development of novel portable sensors. An increasing body of work is making excellent progress toward the implementation of self-powered PEC sensors for detection, but there have been no reviews to date. The present review first introduces the state of the art in the development of self-powered PEC sensors. Then, different types of self-powered PEC sensors are summarized and discussed in detail, including their current, power, and potential. Additionally, single- and dual-photoelectrode systems are classified and systematically compared. Finally, the current developments and major challenges that need to be addressed are also summarized. This review provides valuable insights into the current state of self-powered PEC sensors to promote further progress in this field.

Photo-assisted Zn-air battery-driven self-powered aptasensor based on the 2D/2D Schottky heterojunction of cadmium-doped molybdenum disulfide and Ti3C2Tx nanosheets for the sensitive detection of penicillin G

A novel photocatalyzed Zn-air battery-driven (ZAB)-based aptasensor has been manufactured using the two dimensional (2D)/2D Schottky heterojunction as photocathode and Zn plate as photoanode. It was then employed to sensitively and selectively detect penicillin G (PG) in the complex environment. The 2D/2D Schottky heterojunction was established by the in situ growth of cadmium-doped molybdenum disulfide nanosheets (Cd-MoS₂ NSs) around Ti₃C₂T_x NSs (denoted as Cd-MoS₂@Ti₃C₂T_x) by using phosphomolybdic acid (PMo₁₂) as precursor, thioacetamide as sulfur source, and Cd(NO₃)₂ as a doping agent through the hydrothermal method. The gained Cd-MoS₂@Ti₃C₂T_x heterojunction possessed contact interface, hierarchical structure, and plenty of sulfur and oxygen vacancies, thus showing the enhanced separation ability of photocarriers and electron transfer. Due to the enhanced UV-vis light adsorption ability, high photoelectric conversion efficiency, and exposed catalytic active sites, the constructed photocatalyzed ZAB displayed a boosted output voltage of 1.43 V under UV-vis light irradiation. The developed ZAB-driven self-powered aptasensor demonstrated an ultralow detection limit of 0.06 fg mL^-1 within a PG concentration ranged from 1.0 fg mL^-1 to 0.1 ng mL^-1, as deduced from the power density-current curves, along with high specificity, good stability and promising reproducibility, as well as excellent regeneration ability and wide applicability. The present work provided an alternative analysis method for the sensitive analysis of antibiotics based on the portable photocatalyzed ZAB-driven self-powered aptasensor.

A sensitive label-free biosensor based on Ag2S-sensitived Bi2WO6/BiOBr heterojunction for photoelectrochemical immunoassay of prostate specific antigen

Prostate cancer is one of the most common cancers in the world, and its early diagnosis can effectively reduce mortality. A new label-free photoelectrochemical (PEC) immunosensor on the basis of Bi₂WO₆/BiOBr nanocomposite materials has been successfully prepared for the test of prostate-specific antigen (PSA) in human serum in this work. The Ag₂S-sensitized Bi₂WO₆/BiOBr heterojunction was used as a photosensitive material, which effectively improved the photocurrent response. On Bi₂WO₆/BiOBr surface, dopamine immobilized PSA antibody by self-polymerizing to form polydopamine membrane. Antigen and antibody are specifically combined to achieve quantitative detection of PSA according to the current changes at different concentrations of antigen. Under the optimal experimental conditions, the PEC immunosensor has an ideal linear relationship between 1 pg/mL - 50 ng/mL, and the detection limit is 0.084 pg/mL. In addition, the prepared immunosensor has good stability, reproducibility and selectivity, providing a new method for the detection of PSA in actual sample analysis.

2D carbon materials based photoelectrochemical biosensors for detection of cancer antigens

Cancer is a leading cause of death globally and early diagnosis is of paramount importance for identifying appropriate treatment pathways to improve cancer patient survival. However, conventional methods for cancer detection such as biopsy, CT scan, magnetic resonance imaging, endoscopy, X-ray and ultrasound are limited and not efficient for early cancer detection. Advancements in molecular technology have enabled the identification of various cancer biomarkers for diagnosis and prognosis of the deadly disease. The detection of these biomarkers can be done by biosensors. Biosensors are less time consuming compared to conventional methods and has the potential to detect cancer at an earlier stage. Compared to conventional biosensors, photoelectrochemical (PEC) biosensors have improved selectivity and sensitivity and is a suitable tool for detecting cancer agents. Recently, 2D carbon materials have gained interest as a PEC sensing platform due to their high surface area and ease of surface modifications for improved electrical transfer and attachment of biorecognition elements. This review will focus on the development of 2D carbon nanomaterials as electrode platform in PEC biosensors for the detection of cancer biomarkers. The working principles, biorecognition strategies and key parameters that influence the performance of the biosensors will be critically discussed. In addition, the potential application of PEC biosensor in clinical settings will also be explored, providing insights into the future perspective and challenges of exploiting PEC biosensors for cancer diagnosis.

Photoelectrochemical sandwich immunoassay of CYFRA21-1 based on In2O3/WO3 type-II heterojunction and CdS quantum dots-polydopamine nanospheres labeling

Using an In₂O₃/WO₃ type-II heterojunction modified fluorine-doped tin oxide (FTO) electrode as the photoanode and CdS quantum dots (QDs)-polydopamine nanospheres (PDA NSs) as the secondary antibody (Ab₂) label, the photoelectrochemistry (PEC) sandwich immunosensing of the lung cancer marker CYFRA21-1 was studied. WO₃ nanoplates were prepared by a hydrothermal method, In₂O₃ nanoporous spheres were prepared by a hydrothermal method followed by calcination, and the In₂O₃/WO₃ type-II heterojunction with high PEC activity was prepared by ultrasonic mixing and cast-coating. PDA NSs with a high surface area can be loaded with abundant Ab₂ molecules and many CdS QDs with an energy level well matched with the heterojunction, so the photocurrent signal can be amplified by the formation of a sandwich immunostructure. Through the simulation experiments of photoelectrode-modified chitosan films of varying thickness, the effective transport distance of photogenerated charges is preliminarily discussed. Under the optimized conditions, the photocurrent was linear with the common logarithm of CYFRA21-1 concentration from 100 fg mL^-1 to 50 ng mL^-1, with a limit of detection of 56 fg mL^-1 (S/N = 3). The immunoassay of CYFRA21-1 in human serum samples gave satisfactory recovery results.

Biosensing strategies for diagnosis of prostate specific antigen

Almost from the time of its discovery, the prostate specific antigen (PSA) has been one of the most accurate and most extensively studied indicators of prostate cancer (PC). Because of advancements in biosensing systems and technology, PSA analysis methods have been substantially updated and enhanced as compared to their first instances. With the development of techniques in biosensor technology, the number of PSA biosensors that can be used in the biomedical sector is increasing year by year. Many different recognition elements and transducers have been used in the development of biosensor systems that exhibit high sensitivity, selectivity, and specificity. Here in this review, we provide a current overview of the different approaches to PSA detection.

A label-free photoelectrochemical immunosensor for prostate specific antigen detection based on Ag2S sensitized Ag/AgBr/BiOBr heterojunction by in-situ growth method

Prostate cancer is one of the most common cancers in the world, and its early detection is vital to saving the lives of patients. In this research, a novel label-free photoelectrochemical immunosensor was designed for sensitive detection of prostate specific antigen (PSA). Ag₂S sensitized on Ag/AgBr/BiOBr heterojunction could effectively inhibit photogenic holes recombination and improve photocurrent response and sensitivity. Ascorbic acid was an effective electron donor, which can effectively eliminate photo-generated holes. The photocurrent reduced linearly with the logarithm of PSA concentration ranged from 0.001 to 50 ng·mL^-1 and the limit of detection was 0.25 pg·mL^-1. The designed sensor had the advantages of wide linear range, good stability, high reproducibility, and good selectivity. This study not only provided a method for efficient and sensitive detection of PSA, but also provided valuable reference ideas for the detection of other tumor markers.

A photoelectrochemical self-powered sensor for the detection of sarcosine based on NiO NSs/PbS/Au NPs as photocathodic material

In this study, lead(II) sulfide (PbS) nanocrystals were modified on nickel(II)oxide nanosheets (NiO NSs) via the chemical bath method. Afterwards, Au nanoparticles (NPs) were also modified successfully. A photoelectrochemical (PEC) self-powered platform for detecting sarcosine with high PEC activity was constructed. The capacity of NiO NSs to be loaded with other sensitizing materials was mainly attributed to its porous structure and large specific surface area. Under optimum conditions, the constructed PEC self-powered cathodic sensor for detecting sarcosine exhibited a linear range in 5.0 × 10^-8-5.0 × 10^-2 mol/L with a detection limit (LOD) of 1.7 × 10^-8 mol/L. The biosensor demonstrated good reproducibility, acceptable stability and high specificity, thus confirming its potential application in the detection of other similar substances.