Detection of tetanus toxoid with fluorescent tetanus human IgG-AuNC-based immunochromatography test strip

Ultrabright Fluorescent Nanorod-Based Immunochromatographic with Low Background for Advancing Detection Performance

Nanomaterials-based immunochromatographic assays (ICAs) are of great significance in point-of-care testing (POCT), yet it remains challenging to explore low background platforms and high chromogenic intensity probes to improve detection performance. Herein, we reported a low interference and high signal-to-noise ratio fluorescent ICA platform based on ultrabright persistent luminescent nanoparticles (PLNPs) Zn2GeO4: Mn, which could produce intense photoluminescence at 254 nm excitation to reduce background interference from ICA substrates and samples. The prepared immunosensor was successfully applied in T-2 toxin detection with a remarkable limit of detection of 0.025 ng/mL, which was 22-fold more sensitive compared with that of traditional gold nanoparticles. Ultimately, a portable 3D-printed detection device equipped with a smartphone analyzing application was fabricated for quantitative readout in POCT, achieving favorable recoveries in practical sample detection. This work provides a creative attempt for ultrabright PLNP-based low background ICA, and it also guarantees its feasibility in practical POCT.

Advances in immunoassay-based strategies for mycotoxin detection in food: From single-mode immunosensors to dual-mode immunosensors

Mycotoxin contamination in foods and other goods has become a broad issue owing to serious toxicity, tremendous threat to public safety, and terrible loss of resources. Herein, it is necessary to develop simple, sensitive, inexpensive, and rapid platforms for the detection of mycotoxins. Currently, the limitation of instrumental and chemical methods cannot be massively applied in practice. Immunoassays are considered one of the best candidates for toxin detection due to their simplicity, rapidness, and cost-effectiveness. Especially, the field of dual-mode immunosensors and corresponding assays is rapidly developing as an advanced and intersected technology. So, this review summarized the types and detection principles of single-mode immunosensors including optical and electrical immunosensors in recent years, then focused on developing dual-mode immunosensors including integrated immunosensors and combined immunosensors to detect mycotoxins, as well as the combination of dual-mode immunosensors with a portable device for point-of-care test. The remaining challenges were discussed with the aim of stimulating future development of dual-mode immunosensors to accelerate the transformation of scientific laboratory technologies into easy-to-operate and rapid detection platforms.

Tailoring the NIR-II Photoluminescence of Single Thiolated Au25 Nanoclusters by Selective Binding to Proteins

Atomically precise gold nanoclusters are a fascinating class of nanomaterials that exhibit molecule-like properties and have outstanding photoluminescence (PL). Their ultrasmall size, molecular chemistry, and biocompatibility make them extremely appealing for selective biomolecule labeling in investigations of biological mechanisms at the cellular and anatomical levels. In this work, we report a simple route to incorporate a preformed Au₂₅ nanocluster into a model bovine serum albumin (BSA) protein. A new approach combining small-angle X-ray scattering and molecular modeling provides a clear localization of a single Au₂₅ within the protein to a cysteine residue on the gold nanocluster surface. Attaching Au₂₅ to BSA strikingly modifies the PL properties with enhancement and a redshift in the second near-infrared (NIR-II) window. This study paves the way to conrol the design of selective sensitive probes in biomolecules through a ligand-based strategy to enable the optical detection of biomolecules in a cellular environment by live imaging.

Homogeneous Binary Visual and Fluorescence Detection of Tetanus Toxoid in Clinical Samples Based on Enzyme-Free Parallel Hybrid Chain Reaction

Here, we report a simple aptamer-based toxoid test with both fluorescence and binary visual readouts. This test is established based on our recent finding that CdTe quantum dots could differentiate DNA templated Cu NPs from Cu²⁺. Through the further integration with enzyme-free triple parallel hybridization chain reaction, cation exchange reaction, and inkjet printing, we demonstrated specific detection of tetanus toxoid with a limit-of-detection (LOD) of 0.25 fg/mL using fluorescence readout. Using color- and distance-based binary visual readouts, we were able to achieve LODs of 10 fg/mL and 1 fg/mL, respectively. The quantitative test results for tetanus toxoid using both fluorescence and visual readouts were successfully validated in 84 clinical serum samples. Moreover, our strategy also enabled accurate monitoring of tetanus toxoid levels in patients before and after drug treatment. On the basis of our clinical test results, we recommend a cutoff value of 5 fg/mL for tetanus infection.

Rapid Detection of Clostridium tetani by Recombinase Polymerase Amplification Using an Exo Probe

Tetanus is a potentially fatal public health illness resulted from the neurotoxins generated by Clostridium tetani. C. tetani is not easily culturable and culturing the relevant bacteria from infected wounds has rarely been useful in diagnosis; PCR-based assays can only be conducted at highly sophisticated laboratories. Therefore, a real-time recombinase polymerase amplification assay (Exo-RPA) was constructed to identify the fragments of the neurotoxin gene of C. tetani. Primers and the exo probe targeting the conserved region were designed, and the resulting amplicons could be detected in less than 20 min, with a detection limit of 20 copies/reaction. The RPA assay displayed good selectivity, and there were no cross-reactions with other infectious bacteria common in penetrating wounds. Tests of target-spiked serum and pus extract revealed that RPA is robust to interfering factors and has great potential for further development for biological sample analysis. This method has been confirmed to be reliable for discriminating between toxic and nontoxic C. tetani strains. The RPA assay dramatically improves the diagnostic efficacy with simplified device architecture and is a promising alternative to real-time PCR for tetanus detection.

Ultrafast Ratiometric Detection of Aflatoxin B1 Based on Fluorescent β-CD@Cu Nanoparticles and Pt2+ Ions

Rapid detection of aflatoxin B1 (AFB1) is a very important task in food safety monitoring. However, it is still challenging to achieve highly sensitive detection without antibody or aptamer biomolecules. In this work, a rapid detection of aflatoxin B1 was achieved using a ratiometric fluorescence probe without antibody or aptamer for the first time. In the ratiometric fluorescence system, the fluorescence emission of AFB1 at 433 nm was significantly enhanced due to the β-cyclodextrin-AFB1 host-guest interaction and the complexation of AFB1 and Pt²⁺. Meanwhile, the inclusion of aflatoxin B1 also quenched the fluorescence emission of β-CD@Cu nanoparticles (NPs) at 650 nm based on inner filter effect mechanism. On the basis of the above effects, the ratiometric detection of aflatoxin B1 was achieved in the range of 0.03-10 ng/mL with a low detection limit of 0.012 ng/mL (3σ/s). In addition, the β-CD@Cu NPs based nanoprobe could achieve stable response within 1 min to AFB1. The above ratiometric detection also demonstrated excellent application potential in the rapid on-site detection of AFB1 in food due to the advantages of convenience, rapidness, and high accuracy.

Immunoassay based on Au-Ag bimetallic nanoclusters for colorimetric/fluorescent double biosensing of dicofol

The high toxicity of dicofol (DICO) to nontarget organisms has resulted in the contamination of food materials and caused a threat to human health. Developing a rapid and sensitive detection method of DICO in food samples is essential and still pursued. Fluorescent nanomaterials have been widely applied in biosensors to improve the sensitivity of detection. Herein, glutathione-capped Au-Ag bimetallic nanoclusters (Au-Ag NCs) exhibited the outstanding fluorescence characteristic with the average fluorescence lifetime of 1971.08 ns and photoluminescence quantum yield of 9.84% when the molar ratio of Au to Ag was 5:1. Polyethyleneimine modified gold nanoparticles (PEI-Au NPs) with the positive charge were prepared to generate a strong colorimetric signal. A dual-model colorimetric/fluorescent immune probe based on the Au-Ag NCs and PEI-Au NPs was successfully constructed by electrostatic force, and could be applied in both ic-ELISA and LFIA methods for rapid and ultrasensitive detection of DICO. In the ic-ELISA method, the introduction of fluorescence signal significantly increased the sensitivity of detection with the limit of detection (LOD) of 0.62 ng/mL and exhibited an excellent linear relationship within the range of 1.36 ng/mL-19.92 ng/mL. In the LFIA method, the fluorescence signal of Au-Ag NCs was accumulated on the test line and control line for the fluorescence model detection with a quantitative LOD at the level of 1.59 ng/mL. Such a dual-model colorimetric/fluorescent immunoassay serves as a promising candidate to develop new approaches in field detection.

Evaluation the effect of nanoparticles on the structure of aptamers by analyzing the recognition dynamics of aptamer functionalized nanoparticles

Aptamer-functionalized nanoparticles have been widely studied as targeted probes in biomedical applications for targeted therapy and imaging. The rigidity of the nanoparticle could stabilized the spatial structure of the aptamer, ensuring the selectivity and affinity for target recognition in the complex environment. The main aim of this article study was to explore the effect of the spatial structure of aptamer in the interaction between aptamer nanoprobes and receptors. We designed and synthesized aptamer functionalized nanoparticle systems with different derivation lengths, and developed a unique kinetic analysis to quantify affinity interactions. The system used silver decahedral nanoparticles (Ag₁₀NPs), which was then chemically functionalized with thrombin (or IgE) aptamers of different tail lengths to produced different nanoprobes, and employed thrombin (or IgE) as target on a surface plasmon resonance (SPR) biosensor to evaluate the binding of these nanoprobes. Kinetic analysis of the SPR binding curve was performed to evaluated the affinity between nanoprobes and targets. Under the premise of eliminating multivalent interactions, we found that the distance between aptamer and nanoparticle could affect the affinity between nanoprobe and target. Furthermore, we found that keeping a certain distance between aptamer and nanoparticle could effectively improved the recognition efficiency of the aptamer nanoprobe and target. It shows that the rigidity of nanomaterials could maintain the spatial structure of the aptamer.