Anodic electro-fermentation: Empowering anaerobic production processes via anodic respiration

Extracellular respiration is a latent energy metabolism in Escherichia coli

Diverse microbes utilize redox shuttles to exchange electrons with their environment through mediated extracellular electron transfer (EET), supporting anaerobic survival. Although mediated EET has been leveraged for bioelectrocatalysis for decades, fundamental questions remain about how these redox shuttles are reduced within cells and their role in cellular bioenergetics. Here, we integrate genome editing, electrochemistry, and systems biology to investigate the mechanism and bioenergetics of mediated EET in Escherichia coli, elusive for over two decades. In the absence of alternative electron sinks, the redox cycling of 2-hydroxy-1,4-naphthoquinone (HNQ) via the cytoplasmic nitroreductases NfsB and NfsA enables E. coli respiration on an extracellular electrode. E. coli also exhibits rapid genetic adaptation in the outer membrane porin OmpC, enhancing HNQ-mediated EET levels coupled to growth. This work demonstrates that E. coli can grow independently of classic electron transport chains and fermentation, unveiling a potentially widespread new type of anaerobic energy metabolism.

Enhanced corrosion of 2205 duplex stainless steel by Acetobacter aceti through synergistic electron transfer and organic acids acceleration

Acetobacter aceti is a microbe that produces corrosive organic acids, causing severe corrosion of industrial equipment. Previous studies have focused on the organic acid corrosion of A. aceti, but neglected the possibility that it has electron transfer corrosion. This study found that electron transfer and organic acids can synergistically promote the corrosion of 2205 duplex stainless steel (DSS). Electrochemical measurement results showed that corrosion of 2205 DSS was more severe in the presence of A. aceti. Surface analysis indicated a thick biofilm formed on the steel surface, with low pH and dissolved oxygen concentrations under the biofilm. Corrosion intensified when A. aceti lacked a carbon source, suggesting that A. aceti can corrode metals by using metallic substrates as electron donors, in addition to its acidic by-products.

Electrofermentation increases concentration of poly γ-glutamic acid in Bacillus subtilis biofilms

Fluctuations in redox conditions in bioprocesses can alter the end-products, reduce their concentration, and lengthen the process time. Electrofermentation enables rapid metabolic modulation of biosynthesis and allows control of redox imbalances in biofilm-based fermentation processes. In this study, electrofermentation is used to boost the production of the bacterial biopolymer poly-γ-glutamic acid (γ-PGA) from Bacillus subtilis ATCC 6051. When compared to control experiments (3.3 ± 0.99 g L-1 ), the application of an electrode potential E = 0.4 V versus Ag/AgCl results in a more than two-fold increase in the production of γ-PGA (9.13 ± 1.4 g L-1 ). Using an engineered B. subtilis strain, in which γ-PGA production is driven by isopropyl β-d-1-thiogalactopyranoside, electrofermentation improves polymer concentrations from 15.4 ± 1.5 to 23.1 ± 1.6 versus g L-1 . These results confirm that electrofermentation conditions can be adopted to increase the concentration of γ-PGA and perhaps other extracellular biopolymers in industrial strains.

Boosting methane production and raw waste activated sludge treatment in a microbial electrolysis cell-anaerobic digestion (MEC-AD) system: The effect of organic loading rate

This study deals with the effect of different organic loading rates (OLRs) on the organic load removal and the productivity of methane, in a microbial electrolysis cell-anaerobic digestion (MEC-AD) system treating raw waste activated sludge (WAS). For comparison, two identical reactors, a control (AD) and a MEC-AD reactor were constructed. Both reactors operated for 131 days, during which different Organic Loading Rates (OLRs) were examined; 1.1, 1.7 and 2.9 gCOD/(L*d). The results showed that the MEC-AD reactor performed better, relative to the AD reactor, at high OLRs. Specifically, the additional total particulate carbon and Kjeldahl nitrogen removal reached 12% and 13%, respectively, at an OLR of 1.7 gCOD/(L*d), while they reached 19% and 13%, respectively, at an OLR of 2.9 gCOD/(L*d). Moreover, the biogas production and the methane content increased by 30% and 6%, respectively, at an OLR of 1.7 gCOD/(L*d) and by 32% and 5%, respectively, at an OLR of 2.9 gCOD/(L*d). The electrochemical measurements indicated that the power output increased from 5 to 30 mW/m2 when the OLR increased from 1.1 to 2.9 gCOD/(L*d). Overall, the results showed that the MEC-AD accelerated and enhanced the WAS treatment, boosting methane productivity.

Burning questions: Exploring the limits of microbial electrochemical technology for industrial biotechnological applications

Microbial electrochemical technology (MET) has proven to be a promising solution to overcome the redox and energy metabolic constraints, enabling high yields of biosynthesis beyond stoichiometric limits. While there is room for improvement in extracellular electron transfer rates and productivity of the target compounds, it is crucial to think in advance about which bioprocess could be electrified and what would face major challenges. In this opinion paper, I presented and addressed interfacial electron transfer capacity of MET, whether built on biofilm or planktonic cells, and also discussed the upper limits of the MET system for biosynthesis of chemicals accordingly. Potential future application scenarios of different MET were also briefly addressed. This opinion paper aims to encourage the community to rethink the design and development of microbial electrochemical technologies for potential future applications in industrial biotechnology.

Superior anodic electro-fermentation by enhancing capacity for extracellular electron transfer

Anodic electro-fermentation (AEF), where an anode replaces the terminal electron acceptor, shows great promise. Recently a Lactococcus lactis strain blocked in NAD+ regeneration was demonstrated to use ferricyanide as an alternative electron acceptor to support fast growth, but the need for high concentrations of this non-regenerated electron acceptor limits practical applications. To address this, growth of this L. lactis strain, and an adaptively evolved (ALE) mutant with enhanced ferricyanide respiration capacity were investigated using an anode as electron acceptor in a bioelectrochemical system (BES) setup. Both strains grew well, however, the ALE mutant significantly faster. The ALE mutant almost exclusively generated 2,3-butanediol, whereas its parent strain mainly produced acetoin. The ALE mutant interacted efficiently with the anode, achieving a record high current density of 0.81 ± 0.05 mA/cm2. It is surprising that a Lactic Acid Bacterium, with fermentative metabolism, interacts so well with an anode, which demonstrates the potential of AEF.

Electricity-Driven Microbial Metabolism of Carbon and Nitrogen: A Waste-to-Resource Solution

Electricity-driven microbial metabolism relies on the extracellular electron transfer (EET) process between microbes and electrodes and provides promise for resource recovery from wastewater and industrial discharges. Over the past decades, tremendous efforts have been dedicated to designing electrocatalysts and microbes, as well as hybrid systems to push this approach toward industrial adoption. This paper summarizes these advances in order to facilitate a better understanding of electricity-driven microbial metabolism as a sustainable waste-to-resource solution. Quantitative comparisons of microbial electrosynthesis and abiotic electrosynthesis are made, and the strategy of electrocatalyst-assisted microbial electrosynthesis is critically discussed. Nitrogen recovery processes including microbial electrochemical N₂ fixation, electrocatalytic N₂ reduction, dissimilatory nitrate reduction to ammonium (DNRA), and abiotic electrochemical nitrate reduction to ammonia (Abio-NRA) are systematically reviewed. Furthermore, the synchronous metabolism of carbon and nitrogen using hybrid inorganic-biological systems is discussed, including advanced physicochemical, microbial, and electrochemical characterizations involved in this field. Finally, perspectives for future trends are presented. The paper provides valuable insights on the potential contribution of electricity-driven microbial valorization of waste carbon and nitrogen toward a green and sustainable society.

Screening of natural phenazine producers for electroactivity in bioelectrochemical systems

Mediated extracellular electron transfer (EET) might be a great vehicle to connect microbial bioprocesses with electrochemical control in stirred-tank bioreactors. However, mediated electron transfer to date is not only much less efficient but also much less studied than microbial direct electron transfer to an anode. For example, despite the widespread capacity of pseudomonads to produce phenazine natural products, only Pseudomonas aeruginosa has been studied for its use of phenazines in bioelectrochemical applications. To provide a deeper understanding of the ecological potential for the bioelectrochemical exploitation of phenazines, we here investigated the potential electroactivity of over 100 putative diverse native phenazine producers and the performance within bioelectrochemical systems. Five species from the genera Pseudomonas, Streptomyces, Nocardiopsis, Brevibacterium and Burkholderia were identified as new electroactive bacteria. Electron discharge to the anode and electric current production correlated with the phenazine synthesis of Pseudomonas chlororaphis subsp. aurantiaca. Phenazine-1-carboxylic acid was the dominant molecule with a concentration of 86.1 μg/ml mediating an anodic current of 15.1 μA/cm² . On the other hand, Nocardiopsis chromatogenes used a wider range of phenazines at low concentrations and likely yet-unknown redox compounds to mediate EET, achieving an anodic current of 9.5 μA/cm² . Elucidating the energetic and metabolic usage of phenazines in these and other species might contribute to improving electron discharge and respiration. In the long run, this may enhance oxygen-limited bioproduction of value-added compounds based on mediated EET mechanisms.

Experimental and computational models to investigate intestinal drug permeability and metabolism

Oral administration is the preferred route for drug administration that leads to better therapy compliance. The intestine plays a key role in the absorption and metabolism of oral drugs, therefore, new intestinal models are being continuously proposed, which contribute to the study of intestinal physiology, drug screening, drug side effects, and drug-drug interactions.Advances in pharmaceutical processes have produced more drug formulations, causing challenges for intestinal models. To adapt to the rapid evolution of pharmaceuticals, more intestinal models have been created. However, because of the complexity of the intestine, few models can take all aspects of the intestine into account, and some functions must be sacrificed to investigate other areas. Therefore, investigators need to choose appropriate models according to the experimental stage and other requirements to obtain the desired results.To help researchers achieve this goal, this review summarised the advantages and disadvantages of current commonly used intestinal models and discusses possible future directions, providing a better understanding of intestinal models.

Novel electro-assisted micro-aerobic cathode biological technology induces oxidative demethylation of N, N-dimethylformamide for efficient ammonification of refractory membrane-making wastewater

Recalcitrant and toxicological membrane-making wastewater displays negative impacts on environment, and this is difficult to treat efficiently using conventional hydrolytic acidification. In this study, a novel electro-assisted biological reactor with micro-aerobic cathode (EABR-MAC) was developed to improve the biodegradation and ammonification of N, N-dimethylformamide (DMF) in membrane-making wastewater, and the metabolic mechanism using metagenomic sequencing as comprehensively illustrated. The results showed that EABR-MAC significantly improved the ammonification of refractory organonitrogen and promoted DMF oxidative degradation by driving the electron transferred to the cathode. Additionally, the inhibition rates of oxygen uptake rate and nitrification in EABR-MAC were both lower under different cathode aeration frequency conditions. Microbial community analysis indicated that the functional fermentation bacteria and exoelectrogens, which were correlated with COD removal, ammonification, and detoxification, were significantly enriched upon electrostimulation, and the positive biological connections increased to form highly connected communities instead of competition. The functional genes revealed that EABR-MAC forcefully intervened with the metabolic pathway, so that DMF converted to formamide and ammonia by oxidative demethylation and formamide hydrolysis. The results of this study provide a promising strategy for efficient conversion of organonitrogen into ammonia nitrogen, and offer a new insight into the effects of electrostimulation on microbial metabolism.

Anode-assisted electro-fermentation with Bacillus subtilis under oxygen-limited conditions

BACKGROUND

Bacillus subtilis is generally regarded as a ubiquitous facultative anaerobe. Oxygen is the major electron acceptor of B. subtilis, and when oxygen is absent, B. subtilis can donate electrons to nitrate or perform fermentation. An anode electrode can also be used by microorganisms as the electron sink in systems called anodic electro-fermentation. The facultative anaerobic character of B. subtilis makes it an excellent candidate to explore with different electron acceptors, such as an anode. This study aimed to optimise industrial aerobic bioprocesses using alternative electron acceptors. In particular, different end product spectrum of B. subtilis with various electron acceptors, including anode from the electro-fermentation system, was investigated.

RESULTS

B. subtilis was grown using three electron acceptors, i.e. oxygen, nitrate and anode (poised at a potential of 0.7 V vs. standard hydrogen electrode). The results showed oxygen had a crucial role for cells to remain metabolically active. When nitrate or anode was applied as the sole electron acceptor anaerobically, immediate cell lysis and limited glucose consumption were observed. In anode-assisted electro-fermentation with a limited aeration rate, acetoin, as the main end product showed the highest yield of 0.78 ± 0.04 mol_product/mol_glucose, two-fold higher than without poised potential (0.39 ± 0.08 mol_product/mol_glucose).

CONCLUSIONS

Oxygen controls B. subtilis biomass growth, alternative electron acceptors utilisation and metabolites formation. Limited oxygen/air supply enabled the bacteria to donate excess electrons to nitrate or anode, leading to steered product spectrum. The anode-assisted electro-fermentation showed its potential to boost acetoin production for future industrial biotechnology applications.

Electrolytic stimulation in aid of poly(β-L-malic acid) production by Aureobasidium melanogenum ipe-1

Poly (β-L-malic acid) (PMLA) is attracting industrial interest for its potential application in medicine and other industries. In this study, electrolytic stimulation assisted PMLA production was developed. Firstly, it was found that the pentavalent nitrogen source (i.e., NO₃^-) was more suitable for PMLA production. Secondly, a usual single-chamber bioelectric-fermentation system (BES) cannot improve PMLA production, which can only promote cell growth. Then, a new single-chamber BES with an external circulation was developed, where the PMLA metabolism was further intensified. Finally, the integration of NO₃^- addition and electrolytic stimulation mode (c) showed a positive synergy on the PMLA production. Compared to the case without NO₃^- addition and electrolytic stimulation, the PMLA production was increased by 22.9 % using the integrated process. Moreover, compared to the case without the electrolytic stimulation mode (c), it was revealed that the different genes involved in 12 metabolic subsystems using the integrated process, where 31 and 177 genes were up-regulated and down-regulated, respectively. The up-regulated genes were mainly participated in melanin metabolic process, catalase activity, and oxidoreductase activity. Hence, the integration of electrolytic stimulation represents a novel approach to improve PMLA production.

Electricity production and key exoelectrogens in a mixed-culture psychrophilic microbial fuel cell at 4 °C

The electricity production via psychrophilic microbial fuel cell (PMFC) for wastewater treatment in cold regions offers an alternative to avoid the unwanted methane dissolution of traditional anaerobic fermentation. But, it is seldom reported by mixed-culture, especially closed to 0 °C. Thus, a two-chamber mixed-culture PMFC at 4 °C was successfully operated in this study using acetate as an electron donor. The main results demonstrated a good performance of PMFC, including the maximum voltage of 513 mV at 1000 Ω, coulombic efficiency of 53%, and power density of 689 mW/m². The cyclic voltammetry curves of enriched biofilm showed a direct electron transfer pathway. These good performances of mixed-culture PMFC were due to the high psychrophilic activity of enriched biofilm, including exoelectrogens genera of Geobacter (6.1%), Enterococcus (17.5%), and Clostridium_sensu_stricto_12 (3.8%). Consequently, a mixed-culture PMFC provides a reasonable strategy to enrich exoelectrogens with high activity. For low-temperature regions, the mixed-culture PMFC involved biotechnologies shall benefit energy generation and valuable chemical production in the future. KEY POINTS: • PMFC showed a maximum voltage of around 513 mV under a resistance of 1000 Ω. • The coulombic efficiency was 53% and the max power density was 689 mW/m². • Geobacter, Enterococcus, and Clostridium_sensu_stricto_12 were key exoelectrogens.

The effect of riboflavin on the microbiologically influenced corrosion of pure iron by Shewanella oneidensis MR-1

The microbiologically influenced corrosion of pure iron was investigated in the presence of Shewanella oneidensis MR-1 with various levels of exogenous riboflavin (RF) serving as electron shuttles for extracellular electron transfer (EET). With more RF available, a larger and denser phosphate layer was formed on the surface of pure iron by the bacteria. The results of electrochemical impedance spectroscopy, linear polarization resistance and potentiodynamic polarization tests showed that the product layer provided good corrosion protection to the pure iron. Using electrochemical noise, we observed that the addition of RF accelerated the corrosion at the initial stage of immersion, thereby accelerating the deposition of products to form a protective layer subsequently.

Tracing long-distance electron transfer and cable bacteria in freshwater sediments by agar pillar gradient columns

Cable bacteria (CB) perform electrogenic sulphur oxidation (e-SOX) by spatially separating redox-half-reactions over cm-distances. For freshwater systems, the ecology of CB is not yet well understood, partly because they proved difficult to cultivate. This study introduces a new "agar pillar" approach to selectively enrich and investigate CB-populations. Within sediment columns, a central agar pillar is embedded, providing a sediment-free gradient-system in equilibrium with the surrounding sediment. We incubated freshwater sediments from a streambed, a sulfidic lake, and a hydrocarbon polluted aquifer in such agar pillar columns. Microprofiling revealed typical patterns of e-SOx, such as the development of a suboxic zone and the establishment of electric potentials. The bacterial communities in the sediments and agar pillars were analysed over depth by PacBio near-full-length 16S rRNA gene amplicon sequencing, allowing for a precise phylogenetic placement of taxa detected. The selective niche of the agar pillar was preferentially colonized by CB related to Candidatus Electronema for surface-water sediments, including several potentially novel species, but not for putative groundwater CB affiliated with Desulfurivibrio spp. The presence of CB was seemingly linked to co-enriched fermenters, hinting at a possible role of e-SOx-populations as an electron sink for heterotrophic microbes. These findings add to our current understanding of the diversity and ecology of CB in freshwater systems, and to a discrimination of CB from surface and groundwater sediments. The agar pillar approach provides a new strategy that may facilitate the cultivation of redox gradient-dependent microorganisms, including previously unrecognized CB populations.

Electro-fermentation: Sustainable bioproductions steered by electricity

The market of biobased products obtainable via fermentation processes is steadily increasing over the past few years, driven by the need to create a decarbonized economy. To date, industrial fermentation (IF) employs either pure or mixed microbial cultures (MMC) whereby the type of the microbial catalysts and the used feedstock affect metabolic pathways and, in turn, the type of product(s) generated. In many cases, especially when dealing with MMC, the economic viability of IF is hindered by factors such as the low attained product titer and selectivity, which ultimately challenge the downstream recovery and purification steps. In this context, electro-fermentation (EF) represents an innovative approach, based on the use of a polarized electrode interface to trigger changes in the rate, yield, titer or product distribution deriving from traditional fermentation processes. In principle, the electrode in EF can act as an electron acceptor (i.e., anodic electro-fermentation, AEF) or donor (i.e., cathodic electro-fermentation, CEF), or simply as a mean to control the oxidation-reduction potential of the fermentation broth. However, the molecular and biochemical basis underlying the EF process are still largely unknown. This review paper provides a comprehensive overview of recent literature studies including both AEF and CEF examples with either pure or mixed microbial cultures. A critical analysis of biochemical, microbiological, and engineering aspects which presently hamper the transition of the EF technology from the laboratory to the market is also presented.

Extracellular electron transfer increases fermentation in lactic acid bacteria via a hybrid metabolism

Energy conservation in microorganisms is classically categorized into respiration and fermentation; however, recent work shows some species can use mixed or alternative bioenergetic strategies. We explored the use of extracellular electron transfer for energy conservation in diverse lactic acid bacteria (LAB), microorganisms that mainly rely on fermentative metabolism and are important in food fermentations. The LAB Lactiplantibacillus plantarum uses extracellular electron transfer to increase its NAD+/NADH ratio, generate more ATP through substrate-level phosphorylation, and accumulate biomass more rapidly. This novel, hybrid metabolism is dependent on a type-II NADH dehydrogenase (Ndh2) and conditionally requires a flavin-binding extracellular lipoprotein (PplA) under laboratory conditions. It confers increased fermentation product yield, metabolic flux, and environmental acidification in laboratory media and during kale juice fermentation. The discovery of a single pathway that simultaneously blends features of fermentation and respiration in a primarily fermentative microorganism expands our knowledge of energy conservation and provides immediate biotechnology applications.

Towards Application of Electro-Fermentation for the Production of Value-Added Chemicals From Biomass Feedstocks

According to recent social demands for sustainable developments, the value of biomass as feedstocks for chemical industry is increasing. With the aid of metabolic engineering and genome editing, microbial fermentation has been developed for producing value-added chemicals from biomass feedstocks, while further improvements are desired for producing more diverse chemicals and increasing the production efficiency. The major intrinsic limitation in conventional fermentation technologies is associated with the need for balancing the net redox equivalents between substrates and products, resulting in limited repertories of fermentation products. One solution for this limitation would be “electro-fermentation (EF)” that utilizes bioelectrochemical systems for modifying the intracellular redox state of electrochemically active bacteria, thereby overcoming the redox constraint of fermentation. Recent studies have attempted the production of chemicals based on the concept of EF, while its utility has not been sufficiently demonstrated in terms of low production efficiencies. Here we discuss EF in terms of its concept, current status and future directions, which help us develop its practical applications to sustainable chemical industries.

Metabolic flux of Bacillus subtilis under poised potential in electrofermentation system: Gene expression vs product formation

The role of poised (negative/positive) potential (0.2/0.4/0.6/0.8 V vs Ag/AgCl at anode) was studied in electrofermentation system (EF) to understand the metabolic flux of Bacillus subtilis with pyruvate as a carbon source. The relative expression of genes encoding pyruvate dehydrogenase (pdhA), lactate dehydrogenase (lctE), acetate kinase (ackA), pyruvate carboxylase (pycA), adenylosuccinate lyase (purB), acylCoA dehydrogenase (acdA) and NADH dehydrogenase (ndh) allowed evaluation of metabolic changes in correlation to product formation and bioelectrochemical analysis. In comparison to control, poised circumstances showed marked influence on product profile with up-regulation of key enzymes involved in pyruvate metabolism. EF poised with - 0.8 V and -0.6 V enhanced bio-hydrogen production by 6 folds and 4 folds respectively. Concomitantly, -0.8 V resulted in maximum ethanol and acetic acid production whilst, -0.6 V and + 0.6 V resulted in maximum lactic acid and succinic acid production respectively. The transcripts for genes associated synthesis were upregulated in the respected poised reactors.

Valorisation of CO2 into Value-Added Products via Microbial Electrosynthesis (MES) and Electro-Fermentation Technology

Microbial electrocatalysis reckons on microbes as catalysts for reactions occurring at electrodes. Microbial fuel cells and microbial electrolysis cells are well-known in this context; both prefer the oxidation of organic and inorganic matter for producing electricity. Notably, the synthesis of high energy-density chemicals (fuels) or their precursors by microorganisms using bio-cathode to yield electrical energy is called Microbial Electrosynthesis (MES), giving an exceptionally appealing novel way for producing beneficial products from electricity and wastewater. This review accentuates the concept, importance and opportunities of MES, as an emerging discipline at the nexus of microbiology and electrochemistry. Production of organic compounds from MES is considered as an effective technique for the generation of various beneficial reduced end-products (like acetate and butyrate) as well as in reducing the load of CO2 from the atmosphere to mitigate the harmful effect of greenhouse gases in global warming. Although MES is still an emerging technology, this method is not thoroughly known. The authors have focused on MES, as it is the next transformative, viable alternative technology to decrease the repercussions of surplus carbon dioxide in the environment along with conserving energy.

Recent advances in the improvement of bi-directional electron transfer between abiotic/biotic interfaces in electron-assisted biosynthesis system

As an important biosynthesis technology, electron-assisted biosynthesis (EABS) system can utilize exogenous electrons to regulate the metabolic network of microorganisms, realizing the biosynthesis of high value-added chemicals and CO₂ fixation. Electrons play crucial roles as the energy carriers in the EABS process. In fact, efficient interfacial electron transfer (ET) is the decisive factor to realize the rapid energy exchange, thus stimulating the biosynthesis of target metabolic products. However, due to the interfacial resistance of ET between the abiotic solid electrode and biotic microbial cells, the low efficiency of interfacial ET has become a major bottleneck, further limiting the practical application of EABS system. As the cell membrane is insulated, even the cell membrane embedded electron conduit (no matter cytochromes or channel protein for shuttle transferring) to increase the cell membrane conductivity, the ET between membrane electron conduit and electrode surface is kinetically restricted. In this review, the pathway of bi-directional interfacial ET in EABS system was summarized. Furthermore, we reviewed representative milestones and advances in both the anode outward interfacial ET (from organism to electrode) and cathode inward interfacial ET (from electrode to organism). Here, new insights from the perspectives of material science and synthetic biology were also proposed, which were expected to provide some innovative opinions and ideas for the following in-depth studies.