Biopolymers production from microalgae and cyanobacteria cultivated in wastewater: Recent advances

Current perspectives on microalgae and extracellular polymers for reducing antibiotic resistance genes in livestock wastewater

Antibiotic resistance genes (ARGs) in livestock wastewater resulting from excessive antibiotics used in animal farming pose significant environmental and public health risks. Conventional treatment methods are often costly, inefficient, and may inadvertently promote ARG transmission. Microalgae, with their long genetic distance from bacteria and strong ability to utilize wastewater nutrients, offer a sustainable solution for ARG mitigation. This review studied the abundance and characterization of ARGs in livestock wastewater, highlighted microalgal-based removal mechanisms of ARGs, including phagocytosis, competition, and absorption by extracellular polymeric substances (EPS), and explored factors influencing their efficacy. Notably, the microalgae-EPS system reduced ARGs by 0.62-3.00 log, demonstrating significant potential in wastewater treatment. Key challenges, such as optimizing algal species, understanding EPS-ARG interactions, targeted reduction of host bacteria, and scaling technologies, were discussed. This work provides critical insights for advancing microalgal-based strategies for ARG removal, promoting environmentally friendly and efficient wastewater management.

Poly-3-hydroxy butyrate production and it's characterization from a new species, Rhodobacter alkalitolerans strain JA916T in different growth conditions

Rhodobacter alkalitolerans strain JA916T (R. alkalitolerans) is a purple non‑sulfur photosynthetic bacterium that grows in alkaline conditions. It is metabolically versatile, and can produce polyhydroxy butyrate (PHB) as internal storage carbon. We observed higher expression of PHB-synthesizing genes and greater PHB production under normal pH (npH) conditions compared to high pH (hpH), along with increased biomass production. The purity of PHB was analyzed using fourier transformed infrared spectroscopy, gas chromatography-mass spectrometry, and proton and carbon nuclear magnetic resonance, confirming it as a polymer of 3-hydroxybutric acid. Furthermore, PHB was characterized using differential scanning calorimetry and thermogravimetric analysis, revealing a melting temperature (Tm) of 177.59 °C and the highest degradation rate at 282.02 °C. This is the first report of high-yield PHB production within 24-28 h of high light exposure to R. alkalitolerans, highlighting its potential as a biodegradable plastic alternative.

Understanding the role of poly(3-hydroxybutyrate) depolymerases in waste management

Since conventional plastics are poorly degradable and harmful to living organisms, there is a need to look for alternative options such as poly(3-hydroxybutyrate) - PHB. This polymer is biodegradable via PHB depolymerases (PHBDs). Literature survey reveals that there are no comprehensive updates on PHBDs and in the current review, details regarding extracellular and intracellular forms of the enzyme are presented. Phylogenetically diverse PHBD-producing microorganisms are prevalent in a variety of natural and man-made habitats. These enzymes have been purified from different organisms and are seen to be active over a wide range of pH and temperatures. In general, extracellular PHBDs are made up of four constituents - signal peptide, catalytic domain [with a signature triad (serine, aspartate and histidine) and an oxyanion histidine], linker domain and substrate binding domain that enable degradation of PHB. Intracellular PHBDs have been mainly studied in bacterial genera such as Rhodobacter, Rhodospirillum, Ralstonia, Zoogloea, Pseudomonas, Sinorhizobium and Bacillus. Genes encoding them have been identified, characterized and cloned in other organisms. PHBD producers are envisioned to play a significant role in developing ecofriendly methods for removing PHB wastes thereby highlighting their practical relevance. Development of appropriate consortia including diverse PHBD producers and their introduction in waste disposal sites would enable treatment of PHB containing wastes. By using bioinformatics and synthetic biology-based approaches, further investigations on PHBDs from unexplored microorganisms can be undertaken and their role in the bioplastic waste management can be unraveled.

The Biology of Natural Polymers Accelerates and Expands the Science of Biomacromolecules: A Focus on Structural Proteins

This Perspective explores the use of biomacromolecules in natural materials synthesized by living organisms, such as spider silk, in the development of sustainable synthetic materials. Currently employed synthetic polymers lack the hierarchical complexity and unique properties of natural materials composed of biomacromolecules. By understanding the composition of these natural materials, it may be able to reproduce their properties synthetically. Additionally, research directions involving the use of renewable resources such as nitrogen and carbon dioxide from the air and seawater to develop biomacromolecules such as spider silk and biopolyester via photosynthetic organisms are reviewed. Next-generation biomacromolecule research will aid in the creation of a sustainable global society, advancing fields such as biomanufacturing, agriculture, aquaculture, and other industries.

Comparison of the Macro Chain Transfer Agent and the Macro Azo Initiator Based on the Poly(3-hydroxy Butyrate) in the Polymerization Kinetics of Methyl Methacrylate

Poly(3-hydroxybutyrate) (PHB) derivatives are attractive for sustainable polymer production, yet their role in controlling radical polymerization kinetics remains underexplored. In this study, we compare the polymerization kinetics of methyl methacrylate (MMA) using two PHB-based macroinitiators: a macro chain transfer agent (PHB-macro reversible addition-fragmentation chain transfer (RAFT)) and a macroazo initiator (PHBai). RAFT polymerizations (PHB-R-PMMA) were conducted at 70 °C with PHB-macro RAFT in the presence of 2,2'-azobis(isobutyronitrile), while conventional free radical polymerizations (PHBaiPMMA) were carried out using PHBai under identical conditions. The RAFT system exhibited a slightly lower overall rate constant (k = 1.11 × 10-4 L/mol·s) compared to the azo-initiated system (k = 1.28 × 10-4 L/mol·s). Both systems showed a gradual decrease in the PHB content over time, indicating effective copolymer formation with increasing MMA incorporation. Activation energies for PHB-macro RAFT and PHBai were calculated as 0.88 and 1.05 kJ/mol, respectively, demonstrating RAFT's superior control over molecular architecture. The resulting PHB-PMMA block copolymers offer promising applications in orthopedic surgery (e.g., bone cements), packaging, medical implants, drug delivery, and dental materials. This study provides the first direct comparison of PHB-based macro RAFT and azo systems for MMA polymerization, highlighting RAFT's advantage in achieving controlled polymer architectures and expanding biomedical and industrial utility.

A multiple physical crosslinked cellulose-based bioplastics with robust mechanical and thermal stability

The widespread use of traditional petroleum-based plastics has created an environmental crisis and health hazard, so there is an urgent need for bioplastics with excellent performance. However, fabricating of robust mechanical properties and heat resistance bioplastics in an efficient way has remained an enormous challenge. Herein, we proposed a strategy for the synergistic preparation of high-performance bioplastics with multiple physical crosslinking network structures via noncovalent and coordination bonds. In this strategy, carboxylated cellulose nanofibers (CNFs) and the polyphenol structures of tannic acid (TA) interacted noncovalently to create network structures; the bioplastic immersed in Ca2+ solution formed ionic crosslinked networks and TA-Ca coordination bonds. The synergistic effect of multiple network structures composed of hydrogen and coordination bonds made cellulose-based bioplastics have dense structures and robust tensile strength (114.2 MPa), while bioplastics had the characteristics of high transparency and superior thermal stability. Furthermore, the laminated composites formed by the bioplastic and PVA could support 1,000 g easily, which allowed it to be used as weighing application. Thus, the proposed multiple physical crosslinking strategy provides a method for developing cellulose-based bioplastics with excellent performance, which offers a new approach for the subsequent development of sustainable green materials.

Drying strategies for maximizing polyhydroxybutyrate recovery from microalgae cultivated in a raceway pond: A comparative study

Polyhydroxybutyrate (PHB) derived from microalgae are considered a promising alternative bioplastic material to replace synthetic plastics. This study evaluated the effects of various drying techniques (sun, freeze, oven and air drying) on PHB recovery from microalgae. Freeze drying recovered the maximum PHBs (6.2%) followed by sun drying (5.2%), air drying (2.3%), oven drying (2%), and the lowest in wet biomass (1.2%). The most energy-intensive drying method was freeze drying (26.83 kW) followed by oven drying (3 kW) while the other methods did not require energy. The minimum time requirement for drying was oven drying (6 h), followed by freeze drying (24 h), sun drying (48-72 h), and air drying (96-120 h) while wet biomass did not require time. In terms of PHB yield per unit time, oven (0.33%/h) is a more effective drying technique than freeze drying (0.25%/h) which produces 24.24% higher PHB yield per unit time. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) confirmed PHB structure and thermal stability up to 300 °C from dried biomasses compared to wet biomass at 200 °C. This study indicated that drying techniques significantly influence the PHB recovery from microalgae biomass. Findings also revealed that the oven dried technique can be efficiently scaled up for PHB recovery.

Enhancing the production of PHA in Scenedesmus sp. by the addition of green synthesized nitrogen, phosphorus, and nitrogen-phosphorus-doped carbon dots

Plastic consumption has increased globally, and environmental issues associated with it have only gotten more severe; as a result, the search for environmentally friendly alternatives has intensified. Polyhydroxyalkanoates (PHA), as biopolymers produced by microalgae, might be an excellent option; however, large-scale production is a relevant barrier that hinders their application. Recently, innovative materials such as carbon dots (CDs) have been explored to enhance PHA production sustainably. This study added green synthesized multi-doped CDs to Scenedesmus sp. microalgae cultures to improve PHA production. Prickly pear was selected as the carbon precursor for the hydrothermally synthesized CDs doped with nitrogen, phosphorous, and nitrogen-phosphorous elements. CDs were characterized by different techniques, such as FTIR, SEM, ζ potential, UV-Vis, and XRD. They exhibited a semi-crystalline structure with high concentrations of carboxylic groups on their surface and other elements, such as copper and phosphorus. A medium without nitrogen and phosphorous was used as a control to compare CDs-enriched mediums. Cultures regarding biomass growth, carbohydrates, lipids, proteins, and PHA content were analyzed. The obtained results demonstrated that CDs-enriched cultures produced higher content of biomass and PHA; CDs-enriched cultures presented an increase of 26.9% in PHA concentration and an increase of 32% in terms of cell growth compared to the standard cultures.

Harnessing recalcitrant lignocellulosic biomass for enhanced biohydrogen production: Recent advances, challenges, and future perspective

Biohydrogen (Bio-H2) is widely recognized as a sustainable and environmentally friendly energy source, devoid of any detrimental impact on the environment. Lignocellulosic biomass (LB) is a readily accessible and plentiful source material that can be effectively employed as a cost-effective and sustainable substrate for Bio-H2 production. Despite the numerous challenges, the ongoing progress in LB pretreatment technology, microbial fermentation, and the integration of molecular biology techniques have the potential to enhance Bio-H2 productivity and yield. Consequently, this technology exhibits efficiency and the capacity to meet the future energy demands associated with the valorization of recalcitrant biomass. To date, several pretreatment approaches have been investigated in order to improve the digestibility of feedstock. Nevertheless, there has been a lack of comprehensive systematic studies examining the effectiveness of pretreatment methods in enhancing Bio-H2 production through dark fermentation. Additionally, there is a dearth of economic feasibility evaluations pertaining to this area of research. Thus, this review has conducted comparative studies on the technological and economic viability of current pretreatment methods. It has also examined the potential of these pretreatments in terms of carbon neutrality and circular economy principles. This review paves the way for a new opportunity to enhance Bio-H2 production with technological approaches.

Algae-Based Biopolymers for Batteries and Biofuel Applications in Comparison with Bacterial Biopolymers-A Review

Algae-based biopolymers can be used in diverse energy-related applications, such as separators and polymer electrolytes in batteries and fuel cells and also as microalgal biofuel, which is regarded as a highly renewable energy source. For these purposes, different physical, thermochemical, and biochemical properties are necessary, which are discussed within this review, such as porosity, high temperature resistance, or good mechanical properties for batteries and high energy density and abundance of the base materials in case of biofuel, along with the environmental aspects of using algae-based biopolymers in these applications. On the other hand, bacterial biopolymers are also often used in batteries as bacterial cellulose separators or as biopolymer network binders, besides their potential use as polymer electrolytes. In addition, they are also regarded as potential sustainable biofuel producers and converters. This review aims at comparing biopolymers from both aforementioned sources for energy conversion and storage. Challenges regarding the production of algal biopolymers include low scalability and low cost-effectiveness, and for bacterial polymers, slow growth rates and non-optimal fermentation processes often cause challenges. On the other hand, environmental benefits in comparison with conventional polymers and the better biodegradability are large advantages of these biopolymers, which suggest further research to make their production more economical.

Cost-effective production of bioplastic polyhydroxybutyrate via introducing heterogeneous constitutive promoter and elevating acetyl-Coenzyme A pool of rapidly growing cyanobacteria

Bioplastic production using cyanobacteria can be an effective strategy to cope with environmental problems caused by using petroleum-based plastics. Synechococcus elongatus UTEX 2973 with heterogeneous phaCAB can produce bioplastic polyhydroxybutyrate (PHB) with a high CO2 uptake rate. For cost-effective production of PHB in S. elongatus UTEX 2973, phaCAB was expressed by the constitutive Pcpc560, resulting in the production of 226 mg/L of PHB by only photoautotrophic cultivation without the addition of inducer. Several culture conditions were applied to increase PHB productivity, and when acetate was supplied at a concentration of 1 g/L as an organic carbon source, productivity significantly increased resulting in 607.2 mg/L of PHB and additive cost reduction of more than 300 times was achieved compared to IPTG. Consequently, these results suggest the possibility of cyanobacteria as an agent that can economically produce PHB and as a solution to the problem of petroleum-based plastics.

Current advances, challenges and strategies for enhancing the biodegradation of plastic waste

Due to its highly recalcitrant nature, the growing accumulation of plastic waste is becoming an urgent global problem. Biodegradation is one of the best possible approaches for the treatment of plastic waste in an environmentally friendly manner, but our current knowledge on the underlying mechanisms, as well as strategies for the development and enhancement of plastic biodegradation are still limited. This review aims to provide an updated and comprehensive overview of current research on plastic waste biodegradation, focusing on enhancement strategies with ongoing research significance, including the mining of highly efficient plastic-degrading microorganisms/enzymes, utilization of synergistic additives, novel pretreatment approaches, modification via molecular engineering, and construction of bacterial/enzyme consortia systems. Studying these strategies can (i) enrich the high-performance microbial/enzymes toolbox for plastic degradation, (ii) provide methods for recycling and upgrading plastics, as well as (iii) enable further molecular modification and functional optimization of plastic-degrading enzymes to realize economically viable biodegradation of plastics. To the best of our knowledge, this is the first review to discuss in detail strategies to enhance biodegradation of plastics. Finally, some recommendations for future research on plastic biodegradation are listed, hoping to provide the best direction for tackling the plastic waste dilemma in the future.

Characterization of Priestia megaterium S1, a polymer degrading gut microbe isolated from the gut of Tenebrio molitor larvae fed on Styrofoam

This study reveals that Tenebrio molitor larvae are fed with two different feeds i.e., barley bran along with Styrofoam, and barley bran without Styrofoam, the survival percentage of mealworms shows 86 and 89%, respectively. Five isolates namely S1, S2, S3, S4, and S5 were isolated from the gut of Styrofoam-feeding Tenebrio molitor larvae and tested for Hydrophobicity percentage, clear zone assay and turbidity measurement. S1 isolate showed best (turbidity percentage of 19.65%, 13.54% hydrophobicity percentage, and 37% zone of clearance) when compared to other isolates, respectively. 16S rRNA characterization of S1 isolate revealed that the isolate belongs to Priestia megaterium S1(ON024787). Biodegradation of PE and PS beads by Priestia megaterium S1 makes physical and structural changes over 180 days, after microbial adhesion to the beads. Growth parameters have shown that the Priestia megaterium S1 thrives more effectively in the pH (6.5), temperature (28 °C) and at 1.5% LDPE/HDPE/PS concentration there is maximum utilization of carbon and a high percentage survival rate. Significant colonization of the isolate after 30 days over beads of LDPE (52.47%), HDPE (49.26%), and PS (48.11%), respectively. Experimental data revealed that Priestia megaterium S1 have PE and PS beads degradation capacity, proven by weight loss studies, at 6th-month percentage weight loss of LDPE (36.1%), HDPE (31.9%), and PS (28.6%), the percentage loss of carbon and hydrogen shows higher when compared to control. One month Biological Oxygen Demand (BOD) showed that LDPE (7.4 mg/l), HDPE (7.2 mg/l), PS (6.7 mg/l), and simultaneous studies on CO2 evolution over LDPE treatment is 5.05 g/l, HDPE (4.26 g/l), and PS (3.91 g/l), respectively. Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM) prove the occurrence of biodegradation on the surface of beads. This work highlights that Priestia megaterium S1 plays a vital role in effectively degrading PE and PS beads.

Fungus-based bioherbicides on circular economy

This review aimed to show that bioherbicides are possible in organic agriculture as natural compounds from fungi and metabolites produced by them. It is discussed that new formulations must be developed to improve field stability and enable the commercialization of microbial herbicides. Due to these bottlenecks, it is crucial to advance the bioprocesses behind the formulation and fermentation of bio-based herbicides, scaling up, strategies for field application, and the potential of bioherbicides in the global market. In this sense, it proposed insights for modern agriculture based on sustainable development and circular economy, precisely the formulation, scale-up, and field application of microbial bioherbicides.

Resource recovery and valorization of food wastewater for sustainable development: An overview of current approaches

The food processing industry is one of the world's largest consumers of potable water. Agri-food wastewater systems consume about 70% of the world's fresh water and cause at least 80% of deforestation. Food wastewater is characterized by complex composition, a wide range of pollutants, and fluctuating water quality, which can cause huge environmental pollution problems if discharged directly. In recent years, food wastewater has attracted considerable attention as it is considered to have great prospects for resource recovery and reuse due to its rich residues of nutrients and low levels of harmful substances. This review explored and compared the sources and characteristics of different types of food wastewater and methods of wastewater treatment. Particular attention was paid to the different methods of resource recovery and reuse of food wastewater. The diversity of raw materials in the food industry leads to different compositional characteristics of wastewater, which determine the choice and efficiency of wastewater treatment methods. Physicochemical methods, and biological methods alone or in combination have been used for the efficient treatment of food wastewater. Current approaches for recycling and reuse of food wastewater include culture substrates, agricultural irrigation, and bio-organic fertilizers, recovery of high-value products such as proteins, lipids, biopolymers, and bioenergy to alleviate the energy crisis. Food wastewater is a promising substrate for resource recovery and reuse, and its valorization meets the current international policy requirements regarding food waste and environment protection, follows the development trend of the food industry, and is also conducive to energy conservation, emission reduction, and economic development. However, more innovative biotechnologies are necessary to advance the effectiveness of food wastewater treatment and the extent of resource recovery and valorization.

Experimental and theoretical investigations of rotating algae biofilm reactors (RABRs): Areal productivity, nutrient recovery, and energy efficiency

Microalgae biofilms have been demonstrated to recover nutrients from wastewater and serve as biomass feedstock for bioproducts. However, there is a need to develop a platform to quantitatively describe microalgae biofilm production, which can provide guidance and insights for improving biomass areal productivity and nutrient uptake efficiency. This paper proposes a unified experimental and theoretical framework to investigate algae biofilm growth on a rotating algae biofilm reactor (RABR). Experimental laboratory setups are used to conduct controlled experiments on testing environmental and operational factors for RABRs. We propose a differential-integral equation-based mathematical model for microalgae biofilm cultivation guided by laboratory experimental findings. The predictive mathematical model development is coordinated with laboratory experiments of biofilm areal productivity associated with ammonia and inorganic phosphorus uptake by RABRs. The unified experimental and theoretical tool is used to investigate the effects of RABR rotating velocity, duty cycle (DC), and light intensity on algae biofilm growth, areal productivity, nutrient uptake efficiency, and energy efficiency in wastewater treatment. Our framework indicates that maintaining a reasonable light intensity range improves biomass areal productivity and nutrient uptake efficiency. Our framework also indicates that faster RABR rotation benefits biomass areal productivity. However, maximizing the nutrient uptake efficiency requires a reasonably low RABR rotating speed. Energy efficiency is strongly correlated with RABR rotating speed and DC.

Transmission of Microcystins in Natural Systems and Resource Processes: A Review of Potential Risks to Humans Health

The rapid rise of microcystins (MCs) poses a serious threat to global freshwater ecosystems and has become an important issue of global public health. MCs have considerable stability and are the most widely distributed hepatotoxins. It cannot only accumulate in aquatic organisms and transfer to higher nutrients and levels, but also be degraded or transferred during the resource utilization of cyanobacteria. No matter which enrichment method, it will lead to the risk of human exposure. This review summarizes the research status of MCs, and introduces the distribution of MCs in different components of aquatic ecosystems. The distribution of MCs in different aquatic organisms was summarized, and the potential risks of MCs in the environment to human safety were summarized. MCs have polluted all areas of aquatic ecosystems. In order to protect human life from the health threats caused by MCs, this paper also proposes some future research directions to promote MCs control and reduce human exposure to MCs.

Bioplastic production in terms of life cycle assessment: A state-of-the-art review

The current transition to sustainability and the circular economy can be viewed as a socio-technical response to environmental impacts and the need to enhance the overall performance of the linear production and consumption paradigm. The concept of biowaste refineries as a feasible alternative to petroleum refineries has gained popularity. Biowaste has become an important raw material source for developing bioproducts and biofuels. Therefore, effective environmental biowaste management systems for the production of bioproducts and biofuels are crucial and can be employed as pillars of a circular economy. Bioplastics, typically plastics manufactured from bio-based polymers, stand to contribute to more sustainable commercial plastic life cycles as part of a circular economy in which virgin polymers are made from renewable or recycled raw materials. Various frameworks and strategies are utilized to model and illustrate additional patterns in fossil fuel and bioplastic feedstock prices for various governments' long-term policies. This review paper highlights the harmful impacts of fossil-based plastic on the environment and human health, as well as the mass need for eco-friendly alternatives such as biodegradable bioplastics. Utilizing new types of bioplastics derived from renewable resources (e.g., biowastes, agricultural wastes, or microalgae) and choosing the appropriate end-of-life option (e.g., anaerobic digestion) may be the right direction to ensure the sustainability of bioplastic production. Clear regulation and financial incentives are still required to scale from niche polymers to large-scale bioplastic market applications with a truly sustainable impact.

Assessing and reducing phenotypic instability in cyanobacteria

Cyanobacteria have promising potential as sustainable cell factories. However, one challenge that is still largely unreported in scaling-up cyanobacteria bioproduction is phenotypic instability, where the emergence and selection of nonproducing cells leading to loss in production has longer evolutionary timescales to take place in industrial-scale bioreactors. Quantifying phenotypic instability early on in strain development allows researchers to make informed decisions on whether to proceed with scalable designs, or if present, devise countermeasures to reduce instability. One particularly effective strategy to mitigate instability is the use of genome-scale metabolic models to design growth-coupled production strains. In silico studies have predicted that creating certain cofactor imbalances or removing recycling reactions in cyanobacteria can be exploited to stably produce a wide variety of metabolites.

Urany-Less Low Voltage Transmission Electron Microscopy: A Powerful Tool for Ultrastructural Studying of Cyanobacterial Cells

Sample preparation protocols for conventional high voltage transmission electron microscopy (TEM) heavily rely on the usage of staining agents containing various heavy metals, most commonly uranyl acetate and lead citrate. However high toxicity, rising legal regulations, and problematic waste disposal of uranyl acetate have increased calls for the reduction or even complete replacement of this staining agent. One of the strategies for uranyless imaging is the employment of low-voltage transmission electron microscopy. To investigate the influence of different imaging and staining strategies on the final image of cyanobacterial cells, samples stained by uranyl acetate with lead citrate, as well as unstained samples, were observed using TEM and accelerating voltages of 200 kV or 25 kV. Moreover, to examine the possibilities of reducing chromatic aberration, which often causes issues when imaging using electrons of lower energies, samples were also imaged using a scanning transmission electron microscopy at 15 kV accelerating voltages. The results of this study demonstrate that low-voltage electron microscopy offers great potential for uranyless electron microscopy.

Progress and prospects of biopolymers production strategies

In recent decades, biopolymers have garnered significant attention owing to their aptitude as an environmentally approachable precursor for an extensive application. In addition, due to their alluring assets and widespread use, biopolymers have made significant strides in their production based on various sources and forms. This review focuses on the most recent improvements and breakthroughs that have been made in the manufacturing of biopolymers, via sections focusing the most frequented and preferred routes like micro-macro, algae apart from focusing on microbials routes with special attention to bacteria and the synthetic biology avenue of biopolymer production. For ensuring the continued growth of the global polymer industry, promising research trends must be pursued, as well as methods for overcoming obstacles that arise in exploiting the beneficial properties exhibited by a variety of biopolymers.

Sewage Water Treatment Using Chlorella Vulgaris Microalgae for Simultaneous Nutrient Separation and Biomass Production

Recovery of wastewater is essential for better management of water resources and can aid in reducing regional or seasonal water shortages. When algae were used to clean wastewater, amazing benefits were guaranteed, such as a decrease in the formation of dangerous solid sludge and the creation of valuable algal biomass through recycling of the nutrients in the wastewater. The trace elements nitrogen, phosphorus, and others that microalgae need for cell development are frequently present in contaminated wastewater. Hence, microalgal bioremediation is used in this study as an effective technique for the simultaneous treatment of COD, NH3-N, and orthophosphate from domestic wastewater and biomass production. Different concentrations of wastewaters were used. The maximum removals attained were: 84% of COD on the fifth day using the lowest mixing ratio of 50%, 95% of ammoniacal nitrogen, and 97% of phosphorus. The highest biomass production was achieved at day 12, except for the mixing ratio of 80% where the growth rate increased until day 14 at 400 mg/L.

Strategies for Exploiting Milk Protein Properties in Making Films and Coatings for Food Packaging: A Review

Biopolymers of different natures (carbohydrates, proteins, etc.) recovered from by-products of industrial processes are increasingly being studied to obtain biomaterials as alternatives to conventional plastics, thus contributing to the implementation of a circular economy. The food industry generates huge amounts of by-products and waste, including unsold food products that reach the end of their shelf life and are no longer usable in the food chain. Milk proteins can be easily separated from dairy waste and adapted into effective bio-based polymeric materials. Firstly, this review describes the relevant properties of milk proteins and the approaches to modifying them for subsequent use. Then, we provide an overview of recent studies on the development of films and coatings based on milk proteins and, where available, their applications in food packaging. Comparisons among published studies were made based on the formulation as well as production conditions and technologies. The role of different additives and modifiers tested for the performances of films and coatings, such as water vapor permeability, tensile strength, and elongation at break, were reviewed. This review also outlines the limitations of milk-protein-based materials, such as moisture sensitivity and brittleness. Overall, milk proteins hold great potential as a sustainable alternative to petroleum-based polymers. However, their use in food packaging materials at an industrial level remains problematic.

Environmental and Human Health Impact of Disposable Face Masks During the COVID-19 Pandemic: Wood-Feeding Termites as a Model for Plastic Biodegradation

The ongoing COVID-19 pandemic has resulted in an unprecedented form of plastic pollution: personal protective equipment (PPE). On the eve of the COVID-19 pandemic, there is a tremendous increase in the production of plastic-based PPE. To control the spread of the virus, face masks (FMs) are used as primary PPE. Thus, the production and usage of FM significantly increased as the COVID-19 pandemic was still escalating. The primary raw materials for the manufacturing of FMs are non-biodegradable synthetic polymers derived from petrochemicals. This calls for an urgent need to develop novel strategies for the efficient degradation of plastics. Furthermore, most of these masks contain plastic or other derivatives of plastic. The extensive usage of FM generates millions of tons of plastic waste for the environment in a short span of time. However, their degradation in the environment and consequences are poorly understood. Therefore, the potential impacts of disposable FM on the environment and human health during the COVID-19 pandemic are clarified in the present study. Despite structural and recalcitrance variations, lignocellulose and plastic polymers have physicochemical features, including carbon skeletons with comparable chemical bonds as well as hydrophobic properties in amorphous and crystalline regions. In this review, we argue that there is much to be learned from termites by transferring knowledge from research on lignocellulose degradation by termites to that on plastic waste.

Microalgae

Microalgae, in the strictest definition, are eukaryotic, unicellular microorganisms that are photosynthetic and typically have an aquatic lifestyle. Despite the fact that cyanobacteria (or 'blue-green algae') are prokaryotic, and are therefore not true algae, we have included them in this overview because they have a similar physiology and ecology to eukaryotic microalgae, and share many biotechnological applications. In this Primer, we discuss the diversity of microalgae, their evolutionary origin and ecological importance, the role they have played in human affairs so far, and how they can help to accelerate the transition to a more sustainable society.

Biodegradability of polyethylene by efficient bacteria from the guts of plastic-eating waxworms and investigation of its degradation mechanism

Polyethylene (PE) has been regarded as non-biodegradable for decades, and the evidence for its degradation by bacteria remains unclear in the literature. Waxworms have recently gained attention for their ability to degrade natural long-chain polymers and synthetic plastic. This study aims to explore the potential of low-density polyethylene (LDPE)-degrading bacteria from the gut symbionts of lesser waxworm (Achroia grisella) larvae for the effective biodegradation of LEDP. Two bacterial isolates (LDPE-DB1 and LDPE-DB2) exhibited the greatest reduction in tensile strength among all isolates (P < 0.0001), reaching 51.3% and 58.3%, respectively. The bacterial strains LDPE-DB1 and LDPE-DB2 stand for molecularly identified species, Citrobacter freundii and Bacillus sp., respectively. After 5 days of incubation, the cell density of LDPE-DB1 and LDPE-DB2 reached 2.20 × 108 and 1.8 × 108 CFU/mL, respectively. However, after 30 days of incubation, the cell density reached 7.3 × 108 and 5.9 × 108, respectively. The formed cavities indicate the high activity of the isolated bacteria from Achroia grisella larvae where the cavities reach a depth of up to 1.2 µm. The findings of this study demonstrated the presence of LDPE-degrading bacteria in Achroia grisella and provide promising evidence for the biodegradation of plastic waste management in the environment.

Can wood-feeding termites solve the environmental bottleneck caused by plastics? A critical state-of-the-art review

The abundance of synthetic polymers has become an ever-increasing environmental threat in the world. The excessive utilization of plastics leads to the accumulation of such recalcitrant pollutants in the environment. For example, during the COVID-19 pandemic, unprecedented demand for personal protective equipment (PPE) kits, face masks, and gloves made up of single-use items has resulted in the massive generation of plastic biomedical waste. As secondary pollutants, microplastic particles (<5 mm) are derived from pellet loss and degradation of macroplastics. Therefore, urgent intervention is required for the management of these hazardous materials. Physicochemical approaches have been employed to degrade synthetic polymers, but these approaches have limited efficiency and cause the release of hazardous metabolites or by-products into the environment. Therefore, bioremediation is a proper option as it is both cost-efficient and environmentally friendly. On the other hand, plants evolved lignocellulose to be resistant to destruction, whereas insects, such as wood-feeding termites, possess diverse microorganisms in their guts, which confer physiological and ecological benefits to their host. Plastic and lignocellulose polymers share a number of physical and chemical properties, despite their structural and recalcitrance differences. Among these similarities are a hydrophobic nature, a carbon skeleton, and amorphous/crystalline regions. Compared with herbivorous mammals, lignocellulose digestion in termites is accomplished at ordinary temperatures. This unique characteristic has been of great interest for the development of a plastic biodegradation approach by termites and their gut symbionts. Therefore, transferring knowledge from research on lignocellulosic degradation by termites and their gut symbionts to that on synthetic polymers has become a new research hotspot and technological development direction to solve the environmental bottleneck caused by synthetic plastic polymers.

Microalgae-based wastewater treatment: Mechanisms, challenges, recent advances, and future prospects

The rapid expansion of both the global economy and the human population has led to a shortage of water resources suitable for direct human consumption. As a result, water remediation will inexorably become the primary focus on a global scale. Microalgae can be grown in various types of wastewaters (WW). They have a high potential to remove contaminants from the effluents of industries and urban areas. This review focuses on recent advances on WW remediation through microalgae cultivation. Attention has already been paid to microalgae-based wastewater treatment (WWT) due to its low energy requirements, the strong ability of microalgae to thrive under diverse environmental conditions, and the potential to transform WW nutrients into high-value compounds. It turned out that microalgae-based WWT is an economical and sustainable solution. Moreover, different types of toxins are removed by microalgae through biosorption, bioaccumulation, and biodegradation processes. Examples are toxins from agricultural runoffs and textile and pharmaceutical industrial effluents. Microalgae have the potential to mitigate carbon dioxide and make use of the micronutrients that are present in the effluents. This review paper highlights the application of microalgae in WW remediation and the remediation of diverse types of pollutants commonly present in WW through different mechanisms, simultaneous resource recovery, and efficient microalgae-based co-culturing systems along with bottlenecks and prospects.

The mechanism of carbon source utilization by microalgae when co-cultivated with photosynthetic bacteria

Microalgae-photosynthetic bacteria (PSB) co-culture, which is promising for wastewater treatment and lipid production, is lacking of study. In this work, the combinations of 3 microalgae and 3 PSB strains were firstly screened and then different inoculation ratios of the co-cultures were investigated. It was found the best promotion was Chlorella pyrenoidosa/Rhodobacter capsulatus co-culture (1:1), where the biomass productivity, acetate assimilation rate and lipid productivity were 1.64, 1.61 and 2.79 times than that of the sum of pure microalgae and PSB cultures, respectively. Meanwhile, the inoculation ratio significantly affected the growth rate and lipid productivity of co-culture systems. iTRAQ analysis showed that PSB played a positive effect on acetate assimilation, TCA cycle and glyoxylate cycle of microalgae, but decreased the carbon dioxide utilization and photosynthesis, indicating PSB promoted the microalgae metabolism of organic carbon utilization and weakened inorganic carbon utilization. These findings provide in-depth understanding of carbon utilization in microalgae-PSB co-culture.

Genomic analysis and biochemical profiling of an unaxenic strain of Synechococcus sp. isolated from the Peruvian Amazon Basin region

Cyanobacteria are diverse photosynthetic microorganisms able to produce a myriad of bioactive chemicals. To make possible the rational exploitation of these microorganisms, it is fundamental to know their metabolic capabilities and to have genomic resources. In this context, the main objective of this research was to determine the genome features and the biochemical profile of Synechococcus sp. UCP002. The cyanobacterium was isolated from the Peruvian Amazon Basin region and cultured in BG-11 medium. Growth parameters, genome features, and the biochemical profile of the cyanobacterium were determined using standardized methods. Synechococcus sp. UCP002 had a specific growth rate of 0.086 ± 0.008 μ and a doubling time of 8.08 ± 0.78 h. The complete genome of Synechococcus sp. UCP002 had a size of ∼3.53 Mb with a high coverage (∼200x), and its quality parameters were acceptable (completeness = 99.29%, complete and single-copy genes = 97.5%, and contamination = 0.35%). Additionally, the cyanobacterium had six plasmids ranging from 24 to 200 kbp. The annotated genome revealed ∼3,422 genes, ∼ 3,374 protein-coding genes (with ∼41.31% hypothetical protein-coding genes), two CRISPR Cas systems, and 61 non-coding RNAs. Both the genome and plasmids had the genes for prokaryotic defense systems. Additionally, the genome had genes coding the transcription factors of the metalloregulator ArsR/SmtB family, involved in sensing heavy metal pollution. The biochemical profile showed primary nutrients, essential amino acids, some essential fatty acids, pigments (e.g., all-trans-β-carotene, chlorophyll a, and phycocyanin), and phenolic compounds. In conclusion, Synechococcus sp. UCP002 shows biotechnological potential to produce human and animal nutrients and raw materials for biofuels and could be a new source of genes for synthetic biological applications.

Microalgae-Based Biorefineries: Challenges and Future Trends to Produce Carbohydrate Enriched Biomass, High-Added Value Products and Bioactive Compounds

Simple Summary

Microalgae-based biorefineries allow the simultaneous production of microalgae biomass enriched in a particular macromolecule and high-added and low-value products if a proper selection of the microalgae species and the cultivation conditions are adequate for the purpose. This review discusses the challenges and future trends related to microalgae-based biorefineries stressing the multi-product approach and the use of raw wastewater or pretreated wastewater to improve the cost-benefit ratio of biomass and products. Emphasis is given to the production of biomass enriched in carbohydrates. Microalgae-bioactive compounds as potential therapeutical and health promoters are also discussed. Future and novel trends following the circular economy strategy are also discussed.

Abstract

Microalgae have demonstrated a large potential in biotechnology as a source of various macromolecules (proteins, carbohydrates, and lipids) and high-added value products (pigments, poly-unsaturated fatty acids, peptides, exo-polysaccharides, etc.). The production of biomass at a large scale becomes more economically feasible when it is part of a biorefinery designed within the circular economy concept. Thus, the aim of this critical review is to highlight and discuss challenges and future trends related to the multi-product microalgae-based biorefineries, including both phototrophic and mixotrophic cultures treating wastewater and the recovery of biomass as a source of valuable macromolecules and high-added and low-value products (biofertilizers and biostimulants). The therapeutic properties of some microalgae-bioactive compounds are also discussed. Novel trends such as the screening of species for antimicrobial compounds, the production of bioplastics using wastewater, the circular economy strategy, and the need for more Life Cycle Assessment studies (LCA) are suggested as some of the future research lines.