Early healing pattern of statin-induced osteogenesis

Bioactive Materials for Bone Regeneration: Biomolecules and Delivery Systems

Novel tissue regeneration strategies are constantly being developed worldwide. Research on bone regeneration is noteworthy, as many promising new approaches have been documented with novel strategies currently under investigation. Innovative biomaterials that allow the coordinated and well-controlled repair of bone fractures and bone loss are being designed to reduce the need for autologous or allogeneic bone grafts eventually. The current engineering technologies permit the construction of synthetic, complex, biomimetic biomaterials with properties nearly as good as those of natural bone with good biocompatibility. To ensure that all these requirements meet, bioactive molecules are coupled to structural scaffolding constituents to form a final product with the desired physical, chemical, and biological properties. Bioactive molecules that have been used to promote bone regeneration include protein growth factors, peptides, amino acids, hormones, lipids, and flavonoids. Various strategies have been adapted to investigate the coupling of bioactive molecules with scaffolding materials to sustain activity and allow controlled release. The current manuscript is a thorough survey of the strategies that have been exploited for the delivery of biomolecules for bone regeneration purposes, from choosing the bioactive molecule to selecting the optimal strategy to synthesize the scaffold and assessing the advantages and disadvantages of various delivery strategies.

The Effects of Statins on Bone Formation Around Implants Placed in Animal Bones: A Systematic Review and Meta-Analysis

Background

Implants are preferred for replacement of missing teeth by the clinicians as well as the patients. Lesser alveolar bone density doesn't preclude any individual for choosing this option but warrants for extra caution. Preclinical studies have explored the osteoinductive potential of statins, but results should be analyzed vigorously before implementing them in humans. There is no meta-analysis to document effect of statins on bone formation around implants in osteoporotic animals.

Methods and material

PubMed, Embase and Cochrane were searched for studies investigating the effect of statins on bone implant contact (BIC %), bone mineral density (BMD %) and bone volume (BV %) around implants at 2, 4 and 12 weeks. Meta-analysis was performed on subgroups with osteoporotic animals which were administered statins through different routes.

Results

Quantitative data from 12 studies showed favorable effect of statins on bone around implants. Positive difference was observed at 4 weeks in BIC (parenteral [SMD = 4.33 (2.89, 5.77); I 2 = 3%)], BMD (local [SMD = 1.33 (0.51, 2.15); I 2 = 0%] and BV (local [SMD = 1.58 (0.76, 2.40); I 2 = 0%]. BIC [SMD = 1.40 (0.89, 1.90); I 2 = 0%] and BV [SMD = 3.91 (2.33, 5.50); I 2 = 43%] were higher in experimental group after 12 weeks of oral administration.

Conclusions

Statins can be investigated as potential bone graft materials to increase the predictability of osseointegration especially in osteoporotic individuals. Future research should focus to reproduce homogeneous data and conclusive recommendations which can be applied in clinical trials.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12663-023-01873-z.

Evaluation of efficacy of simvastatin in bone regeneration following local application in third molar extraction socket: A randomized control trial

Aims and Objectives

The aim of this study is to study the efficacy of simvastatin in bone regeneration following the local application in third molar extraction sockets.

Materials and Methods

This is a randomized controlled trial done on 50 patients involving 100 third molar teeth extraction sockets. The patients were randomly divided based on the placement of simvastatin. Extraction sockets which were treated with simvastatin were considered study sockets and without simvastatin were considered control sockets. The study socket was assigned for the placement of simvastatin (10 mg) powder along with gelfoam as carrier moistened with normal saline solution and control socket was assigned for the placement of gelfoam moistened with saline. Intraoral periapical radiographs were taken on the 1st, 4th, 8th, and 12th weeks, and mean gray scale values indicating bone density were evaluated for both the groups. Cone-beam computed tomography (CBCT) was taken by the end of the 12th week to further evaluate the osseous regeneration. Patients were compared and evaluated for bone density, pain, and swelling. Pain and swelling were evaluated on postoperative days 1 and 7.

Results

The mean gray-level histogram values (bone density) were statistically highly significant in the study group compared to the control group in the 1st, 4th, 8th, and 12th weeks, and CBCT also showed statistically significant difference between the control and study group by the end of the 12th week.

Conclusion

The present data suggest that the local application of simvastatin promotes and enhances bone formation in the extraction sockets, which provides a very cost-effective way for faster bone regeneration.

Prospects for the use of statins in antiviral therapy

Inhibitors of hydroxymethylglutaryl-CoA reductase, in addition to suppressing cholesterol synthesis, have an antiviral effect. Clinical studies have shown antiviral efficacy of statins against COVID-19, HCV, HBV, RSV, HIV, influenza viruses. The ability of statins to inhibit influenza viruses, COVID-19, RSV, HIV, as well as Ebola, Zika, Dengue, Coxsackie, rotaviruses, ADV, HDV, HHV was experimentally confirmed. Statins can also enhance the effects of antiviral drugs, making them more effective in treating infections. Therefore, the use of statins in the complex therapy of viral infections is promising. In addition, the role of influenza viruses, T-cell leukemia and herpesviruses, HIV, HBV, HCV, HPV in the development of atherosclerosis has been identified, so the use of statins in complex treatment is also necessary to correct endothelial dysfunction that occurs under the influence of viruses. Since the activity of retroelements that are evolutionarily related to exogenous viruses increases with aging, it has been suggested that retrotransposons can also be targets for statins. This is evidenced by a change in the expression of non-coding RNAs under the action of statins, since the key sources of non-coding RNAs are retroelements. This property may be an additional factor in the prescription of statins to increase life expectancy, in addition to the prevention and treatment of atherosclerosis, since pathological activation of retroelements are the causes of aging. Viruses, like retroelements, are involved in the pathogenesis of malignant neoplasms, in the treatment of which statins have shown their effectiveness and the ability to enhance the effect of anticancer drugs, overcoming chemoresistance (similar to the potentiation of antiviral drugs). One of the mechanisms of this activity of statins may be their effect on retroelements and viruses.

Osteoinduction using a prefabricated scaffold in the gluteus muscle of wistar rats: An animal study

Introduction:

Bone grafts are very significant for the reconstruction of the trauma and the deformations created thereafter. Various bone forming and promoting agents are widely studied. Hence, in this study, we aim to evaluate the osteoinduction effect of scaffold impregnated with Simvastatin in wistor rats in an observational study.

Material and Methods:

We implanted 18 Wistar rats to be equally divided as controls and test groups. Polycaprolactone coated with 20 mg concentration of Simavastatin under sterile condition was used as test and hydroxy appetite as control. Then, we observed the histopathological Heamatoxilin and Eosin and ABH, sections at 4, 12, and 26 weeks. We noted the calcium deposition and bone formation.

Results:

We observed a significant variation among groups at 4, 12, and 26 weeks in the calcium deposition. While for the bone formation no significant variation were noted among groups at 4 and 12 weeks, however, there was a significant difference noted at 26 weeks. At the end of 12 weeks, mild fibroblast proliferation was seen in the surrounding area. After 26 weeks, ABH sections showed focal area of fibroblast proliferation with mild mononuclear infiltration was noticed; but implant could not be located.

Conclusion:

We conclude that Simavastatin showed an anabolic effect on bone healing.

Potential Bone Regenerative Effects of DFDBA, Simvastatin and Platelet Rich Fibrin, Radiographically and Histologically of Intra-Bony Periodontal Defects in White New Zealand Rabbits

AIM: This study aimed to evaluate and to compare the regenerative power of simvastatin, Demineralized Freeze-Dried Bone Allograft (DFDBA) allograft, platelets rich Fibrin (PRF), and a combination of these materials radiographically and histologically in the intra-bony periodontal defects in white New Zealand rabbits. MATERIALS AND METHODS: This study was conducted on 54 defects in 27 adult male rabbits (n = 27) which were divided into three groups according to the follow-up preplanned scheduled for 1, 2, and 3 weeks. The selected materials were induced as following: A=DFDBA, B=Simvastatin, C= PRF, D=A+C, E=B+C, and F=negative (control group). The intra-bony periodontal defects were induced as the form of one osseous wall defect of 10 mm height, 4 mm depth between the first and the second molars. Then, samples were prepared for histological evaluation. Radiographic assessment was done using computed tomography radiography which was carried at different time intervals as the following baseline, 1, 2, and 3 weeks later. Statistical analysis was performed using ANOVA. RESULTS: After evaluating the results, macroanatomy, radiographically, and histologically, it is thus confirmed that DFDBA allograft combined with PRF create the best bone regenerative results, followed by DFDBA, Simvastatin, simvastatin+ PRF, control group, and finally PRF. CONCLUSION: All of the materials examined in this study showed different percentage in terms of bone density and bone regenerative effects. However, the best results for bone density of the DFDBA + PRF group were recorded after 3 weeks. Thus, the study concludes that a combination of DFDBA + PRF reflects the best properties of both materials in terms of bone density results of the defect. Such results are particularly significant for the selection of bone regeneration materials, and generally, for periodontal regeneration.

Preparation, Characterization and in vitro/in vivo Evaluation of Lovastatin-Loaded PLGA Microspheres by Local Administration for Femoral Head Necrosis

Background

The present work is an effort to develop a novel locally injection LVTT-loaded PLGA microspheres (LVTT-PLGA-MS) on the treatment of rabbits with femoral head necrosis (FHN).

Methods

LVTT-loaded PLGA microspheres (LVTT-PLGA MS) were prepared by an emulsion-solvent evaporation method. The physicochemical properties of LVTT-PLGA-MS were investigated to ensure that they have good qualities and are suitable for local delivery. In vitro drug release behavior of MS was also studied compared with free LVTT. In vivo, we also studied the pharmacokinetics and pharmacodynamics of MS in rabbits with the optimized formulation.

Results

In this study, we used the emulsion-solvent evaporation method to prepare LVTT-PLGA MS. Scanning electron microscopy demonstrated that the LVTT-PLGA MS were regular, round in shape and relatively unified size distributions were selected. The mean PS was 12.3±2.1 µm. The drug-loading rate (27.6% ± 2.9%) was calculated for three batches of MS. The thermogram of LVTT-PLGA MS showed an endothermic peak at 98.3°C, revealing that LVTT existed in MS in an uncrystallized rather than a crystallized form. In the release study, LVTT-PLGA MS is observed linear prolonging drug release rates for more than 21 days without initial burst release. The pharmacodynamic results confirmed that the LVTT-PLGA MS had a good and lasting improvement effect against femoral head necrosis.

Conclusion

Our results demonstrated that LVTT-PLGA MS has the potential for being a local delivery system.

Guided bone regeneration with a gelatin layer and adenoviral delivery of c-myb enhances bone healing in rat tibia

Aim: Bone healing becomes problematic during certain states, such as trauma. This study verifies whether the application of c-myb with gelatin promotes bone healing during bone injuries. Materials & methods: A biodegradable membrane was modified with adenoviral vector c-myb (Ad/c-myb) and gelatin and applied in the bone injury site of rat tibia. Results: c-myb enhanced osteogenic differentiation and mineralization in bone marrow stromal cells after induction with osteogenic media. In vivo examination of rat tibia after application of the biodegradable membrane with Ad/c-myb and a gelatin layer demonstrated increased bone volume, bone mineral density, new bone formation and osteogenic molecules, compared with Ad/LacZ. Conclusion: c-myb has the potential to assist bone healing and may be applicable to the treatment of bone during injury.

Could medications and biologic factors affect post-orthodontic tooth movement changes? A systematic review of animal studies

Immediately after the removal of orthodontic appliances, the teeth might start to drift away from their corrected position in an attempt to reach a new equilibrium. Medications and biologic factors could potentially modulate these processes. The objective of the present systematic review is to systematically investigate and appraise the quality of the evidence regarding the effect of various medications and biologic factors on the rate of relapse following active tooth movement. Search without restrictions in eight databases and hand searching until April 2020 were conducted. Studies performed on animal models investigating the effects of medication and biologic factors on the rate of relapse following orthodontic tooth movement were considered. Following study retrieval and selection, relevant data were extracted and the risk of bias was assessed. Seventeen studies were finally identified, mostly at either high or unclear risk of bias. Ketorolac did not show any significant effects on relapse, while the administration of tetracycline, atorvastatin, psoralen and raloxifene decreased it. Overall, the same result was observed with bisphosphonates with the exception of low dosage of risedronate, which did not have an effect. Osteoprotegerin and strontium resulted in reduced relapse, but not in the immediate post-administration period. Inconsistent or conflicting effects were noted after the use of simvastatin and relaxin. The quality of the available evidence was considered at best as low. It can be concluded that specific medications and biologic factors may have an effect on the rate of relapse following tooth movement. The orthodontist should be knowledgeable about the substances potentially affecting retention.

Drug Delivery Systems Based on Titania Nanotubes and Active Agents for Enhanced Osseointegration of Bone Implants

TiO2 nanotubes (TNTs) are attractive nanostructures for localized drug delivery. Owing to their excellent biocompatibility and physicochemical properties, numerous functionalizations of TNTs have been attempted for their use as therapeutic agent delivery platforms. In this review, we discuss the current advances in the applications of TNT-based delivery systems with an emphasis on the various functionalizations of TNTs for enhancing osteogenesis at the bone-implant interface and for preventing implant-related infection. Innovation of therapies for enhancing osteogenesis still represents a critical challenge in regeneration of bone defects. The overall concept focuses on the use of osteoconductive materials in combination with the use of osteoinductive or osteopromotive factors. In this context, we highlight the strategies for improving the functionality of TNTs, using five classes of bioactive agents: growth factors (GFs), statins, plant derived molecules, inorganic therapeutic ions/nanoparticles (NPs) and antimicrobial compounds.

Adjuvant drug-assisted bone healing: Part III - Further strategies for local and systemic modulation

In this third in a series of reviews on adjuvant drug-assisted bone healing, further approaches aiming at influencing the healing process are discussed. Local and systemic modulation of bone metabolism is pursued with use of a number of drugs with completely different indications, which are characterized by a pleiotropic spectrum of action. These include drugs used to treat lipid disorders (HMG-CoA reductase inhibitors), hypertension (ACE inhibitors), osteoporosis (bisphosphonates), cancer (proteasome inhibitors) and others. Potential applications to enhance bone healing are discussed.

Suppression of NLRP3 inflammasome improves alveolar bone defect healing in diabetic rats

Background

Excessive inflammatory response under hyperglycemia can impair alveolar bone defect healing under diabetic conditions. NLRP3 (NACHT [nucleotide-binding oligomerization], LRR [leucine-rich repeat], and PYD [pyrin domain] domains-containing protein 3) inflammasome has been considered to play a crucial role in the inflammatory response, but its correlation with the impaired alveolar bone repair in diabetes still remains unclarified. The objective of the current study is to investigate the effect of NLRP3 inflammasome inhibition by a lentiviral short hairpin RNA (shRNA) targeting NLRP3 on alveolar bone defect healing in diabetic rats.

Methods

Diabetes was induced in rats by high-fat diet and streptozotocin injection, and alveolar bone defects in both maxillae were created by surgery. Then, the lentiviral shRNA targeting NLRP3 was applied in the defect. Eight weeks after surgery, the alveolar bone regeneration was examined using hematoxylin and eosin (H&E) staining, and the gene expression in the bone healing site was detected using quantitative real-time reverse transcription polymerase chain reaction (qRT-PCR) analysis and western blot analysis.

Results

H&E staining showed that treatment with lentiviral shRNA targeting NLRP3 could increase the bone regeneration score in the alveolar bone defect of diabetic rats. Additionally, qRT-PCR analysis and western blot analysis of the bone defect demonstrated that this shRNA inhibited the expression of NLRP3, apoptosis-associated speck-like protein containing a CARD, caspase-1, and proinflammatory cytokine interleukin-1β and increased the expression of osteogenic markers Runt-related transcription factor 2 and osteocalcin.

Conclusions

Our findings suggested that inhibition of NLRP3 inflammasome could improve alveolar bone defect healing in diabetic rats. The beneficial effect may correlate with reduced proinflammatory cytokine production and increased osteogenic gene expression in hyperglycemia.

Electronic supplementary material

The online version of this article (10.1186/s13018-019-1215-9) contains supplementary material, which is available to authorized users.

New potentials for 3-hydroxy-3-methyl-glutaryl-coenzymeA reductase inhibitors: Possible applications in retarding diabetic complications

The prevalence of diabetes mellitus is increasing all over the world and it is apparent that treatment of diabetic complications has the same importance as primary diabetes treatment and glycemic control. Diabetic complications occur as a result of prolonged hyperglycemia and its consequences, such as advanced glycation end products and reactive oxygen species. Impairment of lipid profile is also contributed to worsening diabetic complications. Therefore, it seems that the application of lipid-lowering agents may have positive effects on reversing diabetic complications besides glycemic control. Statins, a group of lipid-lowering compounds, have been shown to exert antioxidant, immunomodulatory, anti-inflammatory, and antiproliferative properties beyond their lipid-lowering effects. Furthermore, they have been reported to improve diabetic complications with different pathways. In this review, we will discuss the clinical importance, molecular biology of the most important microvascular/macrovascular diabetic complications, possible application of statins and their mechanism of action in retarding these complications.

Does common prescription medication affect the rate of orthodontic tooth movement? A systematic review

Background

As the taking of any medication may theoretically affect the complex pathways responsible for periodontal tissue homeostasis and the events leading to orthodontic tooth movement, it is considered important for the orthodontist to be able to identify prospective patients' history and patterns of pharmaceutical consumption.

Objective

To systematically investigate and appraise the quality of the available evidence regarding the effect of commonly prescribed medications on the rate of orthodontic tooth movement.

Search methods

Search without restrictions in eight databases and hand searching until June 2017.

Selection criteria

Controlled studies investigating the effect of commonly prescribed medications with emphasis on the rate of orthodontic tooth movement.

Data collection and analysis

Following study retrieval and selection, relevant data was extracted and the risk of bias was assessed using the SYRCLE's Risk of Bias Tool.

Results

Twenty-seven animal studies, involving various pharmacologic and orthodontic interventions, were finally identified. Most studies were assessed to be at unclear or high risk of bias. The rate of orthodontic tooth movement was shown to increase after the administration of diazepam, Vitamin C and pantoprazole, while simvastatin, atorvastatin, calcium compounds, strontium ranelate, propranolol, losartan, famotidine, cetirizine, and metformin decreased the rate of orthodontic tooth movement. No interference with the rate of orthodontic tooth movement was reported for phenytoin, phenobarbital and zinc compounds, whereas, inconsistent or conflicting effects were noted after the administration of L-thyroxine, lithium compounds, fluoxetine and insulin. The quality of the available evidence was considered at best as low.

Conclusions

Commonly prescribed medications may exhibit variable effects on the rate of orthodontic tooth movement. Although the quality of evidence was considered at best as low, raising reservations about the strength of the relevant recommendations, the clinician should be capable of identifying patients taking medications and should take into consideration the possible implications related to the proposed treatment.

Registration

PROSPERO (CRD42015029130).

Carbonate Apatite Containing Statin Enhances Bone Formation in Healing Incisal Extraction Sockets in Rats

The purpose of this study was to evaluate the feasibility of using apatite blocks fabricated by a dissolution⁻precipitation reaction of preset gypsum, with or without statin, to enhance bone formation during socket healing after tooth extraction. Preset gypsum blocks were immersed in a Na₃PO₄ aqueous solution to make hydroxyapatite (HA) low crystalline and HA containing statin (HAFS), or in a mixed solution of Na₂HPO₄ and NaHCO₃ to make carbonate apatite (CO) and CO containing statin (COFS). The right mandibular incisors of four-week-old male Wistar rats were extracted and the sockets were filled with one of the bone substitutes or left untreated as a control (C). The animals were sacrificed at two and four weeks. Areas in the healing socket were evaluated by micro-computed tomography (micro-CT) and histological analyses. The bone volume, trabecular thickness, and trabecular separation were greatest in the COFS group, followed by the CO, HAFS, HA, and C groups. The bone mineral density of the COFS group was greater than that of the other groups when evaluated in the vertical plane. The results of this study suggest that COFS not only allowed, but also promoted, bone healing in the socket. This finding could be applicable for alveolar bone preservation after tooth extraction.

Evaluation of the Efficacy of Simvastatin in Bone Regeneration after Surgical Removal of Bilaterally Impacted Third Molars-A Split-Mouth Randomized Clinical Trial

PURPOSE

Simvastatin has been reported to promote osteoblastic activity, inhibit osteoclastic activity, and support osteoblast differentiation induced by bone morphogenetic protein. This split-mouth randomized clinical trial evaluated the effect of local application of simvastatin (10 mg) on bone regeneration after surgical removal of bilaterally impacted mandibular third molars.

MATERIALS AND METHODS

A randomized, split-mouth, single-blinded, single-center trial was performed in 30 patients 18 to 40 years old requiring surgical extraction of bilaterally impacted mandibular third molars. These patients underwent 2 surgical sessions, with extraction of 1 third molar during each session. Each participant was randomly assigned to receive Gelfoam soaked with normal saline or with the drug simvastatin (10 mg) at the first session and were blinded to the use of drug for that particular socket. The alternate regimen was used during the second session. The study was conducted over a period of 3 months. Patients were evaluated for pain, postoperative swelling, and bone density measurement and analysis using intraoral periapical radiographs at the end of 1, 4, 8 and 12 weeks, respectively. In addition, cone-beam computed tomographic (CBCT) images were obtained for every fifth patient at the end of 12 weeks.

RESULTS

Mean gray-level histographic values were significantly higher for the study sockets at the end of 1, 4, 8, and 12 weeks (P = .001) compared with the control sockets (30 sockets each). CBCT analysis further substantiated accelerated bone regeneration in the study sockets.

CONCLUSION

The study was statistically and radiographically in favor of the drug, indicating that local application of simvastatin could be a cost-effective and simple way to stimulate and hasten osseous regeneration.

Enhancement of Bone Healing by Local Administration of Carbon Nanotubes Functionalized with Sodium Hyaluronate in Rat Tibiae

It has been reported that carbon nanotubes (CNTs) serve as nucleation sites for the deposition of bone matrix and cell proliferation. Here, we evaluated the effects of multi-walled CNTs (MWCNTs) on bone repair of rat tibiae. Furthermore, because sodium hyaluronate (HY) accelerates bone restoration, we associated CNTs with HY (HY-MWCNTs) in an attempt to boost bone repair. The bone defect was created by a 1.6-mm-diameter drill. After 7 and 14 days, tibiae were processed for histological and morphometric analyses. Immunohistochemistry was used to evaluate the expression of vascular endothelial growth factor (VEGF) in bone defects. Expression of osteocalcin (OCN), bone morphogenetic protein-2 (BMP-2), and collagen I (Col I) was assessed by real-time PCR. Histomorphometric analysis showed a similar increase in the percentage of bone trabeculae in tibia bone defects treated with HY and HY-MWCNTs, and both groups presented more organized and thicker bone trabeculae than nontreated defects. Tibiae treated with MWCNTs or HY- MWCNTs showed a higher expression of VEGF. Treatment with MWCNTs or HY-MWCNTs increased the expression of molecules involved in the bone repair process, such as OCN and BMP-2. Also, HY- and MWCNT-treated tibiae had an increased expression of Col I. Thus, it is tempting to conclude that CNTs associated or not with other materials such as HY emerged as a promising biomaterial for bone tissue engineering.

The effect of atorvastatin, 3-hydroxy-3-methylglutaryl coenzyme A reductase inhibitor (HMG-CoA), on the prevention of osteoporosis in ovariectomized rabbits

Osteoporosis is a most frequent systemic skeletal disease characterized as low bone mineral density and microarchitectural deterioration of bone tissue, resulting in increased bone fragility and fracture risk. Although several drugs such as bisphosphonates, estrogen replacement treatment, and selective estrogen receptor modulators have been used to treat osteoporosis, all these are not the ideal drugs because of insufficient curative ability and adverse side effects. Recently, atorvastatin has ordinarily been prescribed as an anti-hyperlipidemia drug, not as an anti-osteoporosis drug. However, its clinical outcome and potential treatment mechanism are still unclear. In this study, the bilateral ovariectomy of rabbits was duplicated to develop osteoporosis animal model. The effect of atorvastatin on in vivo was determined, and the functional mechanism was studied in vitro after the curative effect was explored. Atorvastatin was observed to significantly increase the mechanical parameters such as maximum load, stiffness, and energy-absorbing capacity, and it improved the microarchitecture. The anti-osteoporosis activity of atorvastatin may be the result of the promotion of differentiation of osteoblasts by inducing synthesis of vascular endothelial growth factor, bone morphogenetic protein 2 (BMP2), core-binding factor alpha 1 (CBFα1), and inhibition of osteoclast formation through the osteoprotegerin (OPG)-receptor activator for the nuclear factor κB ligand (RANKL) system. Our study observations give reliable experimental evidence for clinical application of atorvastatin to treat the disorder of osteoporosis.

Healing of extraction socket following local application of simvastatin: A split mouth prospective study

BACKGROUND

The role of simvastatin in lowering serum cholesterol level is well described. However, recent findings suggest they have a role in bone formation as well.

AIM AND OBJECTIVES

The present prospective study was conducted to evaluate the efficacy of simvastatin on bone formation in extraction sockets.

MATERIALS AND METHODS

15 patients undergoing all four first premolar extraction were selected based on inclusion and exclusion criteria. Extraction sockets of left premolars (24 and 34) were considered as cases and right premolars (14 and 44) as controls. Overall 30 extraction sites were assigned to each group. Atraumatic extraction was done in all cases following which simvastatin mixed with gelatin sponge was placed in extraction socket of 24 and 34 while only gelatin sponge was placed in 14 and 44. All sockets were then closed with 3-0 vicryl. The patients were kept on follow-up and complications such as dry socket, pain, and swelling were recorded. Intra oral peri apical radiographs were taken immediately after extraction and at 2nd month and 4th month to record changes in the density of alveolar bone. The radiographic measurements were compared and the differences were statistically analyzed.

RESULT

Percent increase in bone density at the end of 8th week and 16th week was significantly high in case as compared to the control group.

CONCLUSION

Local application of simvastatin induces bone formation in extraction sockets. Application is very simple and provides a very cost effective way of faster bone regeneration following tooth extraction.

Enhanced osteogenesis and angiogenesis by mesoporous hydroxyapatite microspheres-derived simvastatin sustained release system for superior bone regeneration

Biomaterials with both excellent osteogenic and angiogenic activities are desirable to repair massive bone defects. In this study, simvastatin with both osteogenic and angiogenic activities was incorporated into the mesoporous hydroxyapatite microspheres (MHMs) synthesized through a microwave-assisted hydrothermal method using fructose 1,6-bisphosphate trisodium salt (FBP) as an organic phosphorous source. The effects of the simvastatin-loaded MHMs (S-MHMs) on the osteogenic differentiation of rat bone marrow mesenchymal stem cells (rBMSCs) and angiogenesis in EA.hy926 cells were investigated. The results showed that the S-MHMs not only enhanced the expression of osteogenic markers in rBMSCs but also promoted the migration and tube formation of EA.hy926 cells. Furthermore, the S-MHMs were incorporated into collagen matrix to construct a novel S-MHMs/collagen composite scaffold. With the aid of MHMs, the water-insoluble simvastatin was homogenously incorporated into the hydrophilic collagen matrix and presented a sustained release profile. In vivo experiments showed that the S-MHMs/collagen scaffolds enhanced the bone regeneration and neovascularization simultaneously. These results demonstrated that the water-insoluble simvastatin could be incorporated into the MHMs and maintained its biological activities, more importantly, the S-MHMs/collagen scaffolds fabricated in this study are of immense potential in bone defect repair by enhancing osteogenesis and angiogenesis simultaneously.

Simvastatin Exposure and Rotator Cuff Repair in a Rat Model

Simvastatin is a common medication prescribed for hypercholesterolemia that accelerates local bone formation. It is unclear whether simvastatin can accelerate healing at the tendon-bone interface after rotator cuff repair. This study was conducted to investigate whether local and systemic administration of simvastatin increased tendon-bone healing of the rotator cuff as detected by maximum load to failure in a controlled animal-based model. Supraspinatus tendon repair was performed on 120 Sprague-Dawley rats. Sixty rats had a polylactic acid membrane overlying the repair site. Of these, 30 contained simvastatin and 30 did not contain medication. Sixty rats underwent repair without a polylactic acid membrane. Of these, 30 received oral simvastatin (25 mg/kg/d) and 30 received a regular diet. At 4 weeks, 5 rats from each group were killed for histologic analysis. At 8 weeks, 5 rats from each group were killed for histologic analysis and the remaining 20 rats were killed for biomechanical analysis. One rat that received oral simvastatin died of muscle necrosis. Average maximum load to failure was 35.2±6.2 N for those receiving oral simvastatin, 36.8±9.0 N for oral control subjects, 39.5±12.8 N for those receiving local simvastatin, and 39.1±9.3 N for control subjects with a polylactic acid membrane. No statistically significant differences were found between any of the 4 groups (P>.05). Qualitative histologic findings showed that all groups showed increased collagen formation and organization at 8 weeks compared with 4 weeks, with no differences between the 4 groups at each time point. The use of systemic and local simvastatin offered no benefit over control groups. [Orthopedics. 2017; 40(2):e288-e292.].

The Effect of Local Rosuvastatin on Mandibular Fracture Healing

Mandibular fracture is the most common injury seen in facial fractures and plays an important role for oral and maxillofacial surgery department. The purpose of this study is to investigate the potential of the local administration of rosuvastatin (RSV) on mandibular fracture healing in rats. Thirty-two rats were divided into 4 groups: group C-14 (control), group R-14, group C-28 (control), and group R-28. A unilateral standard vertical osteotomy was performed right side of the mandibula extending from the tooth to the mandibular basis for each animal. In groups C-14 and C-28 sterile saline treated absorbable collogen sponge was applied to the fracture area, in groups R-14 and R-28 absorbable collogen sponge with saline solution containing 1 mg RSV was applied to the fracture area. Animals in groups C-14 and R-14 were euthanized on the 14th day, groups C-28 and R-28 were euthanized on the 28th day after operation. Stereologic analyses were performed. New bone area and connective tissue volumes were measured. Stereologic analysis showed that group R-14 had significantly more new bone at 2 weeks compared with group C-14. Connective tissue volumes were also significantly higher in R-14. New bone and connective tissue volume differences were not statistically significant between groups C-28 and R-28. Locally administered RSV enhances early bone regeneration on mandibular fracture in rats.

The influence of oral administration of rosuvastatin on calvarial bone healing in rats

The purpose of this study is to investigate the potential of the systemic administration of different doses of rosuvastatin (RSV) on autogenous grafted critical-sized cortical bone defects. Twenty-four rats were divided into three groups: Group C (control), Group RSV-2 and Group RSV-5. A 5-mm diameter critical-size defect was created in the calvarium of each animal. In Group C, the defect was filled by autogenous graft only and rats were given saline solution with oral gavage for 28 days. In Group RSV-2 defects were filled with autogenous graft and rats were given 2 mg/kg rosuvastatin with oral gavage for 28 days. In Group RSV-5 defects were filled with autogenous graft and rats were given 5 mg/kg rosuvastatin with oral gavage for 28 days. All animals were euthanized at 28 days postoperative. Stereologic and micro-CT analyses were performed. New bone area (NBA) and connective tissue volumes were measured. Stereologic analysis showed that Group RSV-5 and RSV-2 had significantly more new bone at 4 weeks compared with group C. Connective tissue volumes were also significantly higher in RSV applicated groups. New bone and connective tissue volumes' difference were not statistically significant between RSV groups. Micro-CT results were similar with stereologic analyses. Orally administered RSV enhances bone regeneration in critical size calvarial rat defects filled with autogenous graft furthermore possible inflammatory effect should be investigated.

The effects of combined human parathyroid hormone (1-34) and simvastatin treatment on the interface of hydroxyapatite-coated titanium rods implanted into osteopenic rats femurs

The effect of human parathyroid hormone 1-34 (PTH) and simvastatin (SIM) alone could promote bone healing in osteoporotic implant fixation, but there are no reports about the combined use of PTH and SIM for promotion of bone healing around implant in osteoporotic settings. This study aims to investigate effects of PTH + SIM on implant stabilization in osteopenic rats. Fourteen weeks after chronically fed a low protein diet, osteopenic rats randomly received implants. Subsequently, the animals were randomly divided into four groups: Control, SIM, PTH and PTH + SIM. Then all rats from groups PTH, SIM and PTH + SIM received PTH (40 μg/kg, three times a week), SIM (25 mg/kg, daily), or both for 12 weeks. The results of our study indicated that all treatments promoted bone healing around implant compared to Control, but PTH + SIM treatment showed significantly stronger effects than PTH or SIM alone in histological, micro-CT, and biomechanical tests. The results indicated additive effects of PTH and SIM on implant fixation in osteoporotic rats.

The functional mechanism of simvastatin in experimental osteoporosis

Osteoporosis is a systemic and metabolic bone disease. New drugs with good curative effect, fewer side effects, and high safety need to be developed urgently. Recently, simvastatin has been used to treat osteoporosis more frequently; however, its clinical effect and treatment mechanism are still unknown. With the use of animal models, the treatment effectiveness of simvastatin on experimental osteoporosis was investigated and the functional mechanism was preliminarily explored. The results show that simvastatin significantly increased the mechanical parameters such as maximum load, stiffness, and energy-absorbing capacity, and improved the microarchitecture. They indicated that the antiosteoporosis activity of simvastatin may be due to the promotion of proliferation and differentiation of osteoblasts. Simvastatin was effective in treating experimental osteoporosis. This study provides necessary experimental evidence for the clinical application of simvastatin in osteoporosis treatment.

The effects of combined human parathyroid hormone (1-34) and simvastatin treatment on osseous integration of hydroxyapatite-coated titanium implants in the femur of ovariectomized rats

The effect of human parathyroid hormone 1-34 (PTH) and simvastatin (SIM) alone could promote bone healing in osteoporotic osseous integration of the implant, but there are no reports about the combined use of PTH and SIM for promotion of bone healing around implant in osteoporotic settings still limited. This study aims to investigate effects of PTH+SIM on osseous integration of the implant in OVX rats. Female Sprague-Dawley rats were used for this study. Twelve weeks after bilateral ovariectomy, all animals were randomly divided into four groups: group control; group SIM; group PTH and group PTH+SIM. Afterwards, all OVX rats received hydroxyapatite (HA)-coated titanium rods (external diameter and length are 1.5mm and 20mm) in the femoral medullary canal. Subsequently, the animals from group SIM, group PTH and group PTH+SIM received human parathyroid hormone 1-34 (60μg/kg, three times a week), SIM (5mg/kg daily), or both for 12 weeks. Implants were inserted bilaterally in all animals until death at 12 weeks. The bilateral femurs of rats were harvested for evaluation. All groups increased new bone formation around the surface of titanium rods and push-out force; group PTH+SIM showed the strongest effects on new bone formation and biomechanical strength. Additionally, these are significant difference observed in bone formation and push-out force between groups SIM and PTH. This finding suggests that intermittent administration of PTH or SIM alone has an effect to increase new bone formation on the surface of HA-coated implants in the osteoporotic condition, and the additive effects of combination PTH and SIM on osseous integration of the implant in OVX rats.

Localised controlled release of simvastatin from porous chitosan-gelatin scaffolds engrafted with simvastatin loaded PLGA-microparticles for bone tissue engineering application

Localised controlled release of simvastatin from porous freeze-dried chitosan-gelatin (CH-G) scaffolds was investigated by incorporating simvastatin loaded poly-(dl-lactide-co-glycolide) acid (PLGA) microparticles (MSIMs) into the scaffolds. MSIMs at 10% w/w simvastatin loading were prepared using a single emulsion-solvent evaporation method. The MSIM optimal amount to be incorporated into the scaffolds was selected by analysing the effect of embedding increasing amounts of blank PLGA microparticles (BL-MPs) on the scaffold physical properties and on the in vitro cell viability using a clonal human osteoblastic cell line (hFOB). Increasing the BL-MP content from 0% to 33.3% w/w showed a significant decrease in swelling degree (from 1245±56% to 570±35%). Scaffold pore size and distribution changed significantly as a function of BL-MP loading. Compressive modulus of scaffolds increased with increasing BL-MP amount up to 16.6% w/w (23.0±1.0kPa). No significant difference in cell viability was observed with increasing BL-MP loading. Based on these results, a content of 16.6% w/w MSIM particles was incorporated successfully in CH-G scaffolds, showing a controlled localised release of simvastatin able to influence the hFOB cell proliferation and the osteoblastic differentiation after 11 days.

Small molecules and their controlled release that induce the osteogenic/chondrogenic commitment of stem cells

Stem cell-based tissue engineering plays a significant role in skeletal system repair and regenerative therapies. However, stem cells must be differentiated into specific mature cells prior to implantation (direct implantation may lead to tumour formation). Natural or chemically synthesised small molecules provide an efficient, accurate, reversible, and cost-effective way to differentiate stem cells compared with bioactive growth factors and gene-related methods. Thus, investigating the influences of small molecules on the differentiation of stem cells is of great significance. Here, we review a series of small molecules that can induce or/and promote the osteogenic/chondrogenic commitment of stem cells. The controlled release of these small molecules from various vehicles for stem cell-based therapies and tissue engineering applications is also discussed. The extensive studies in this field represent significant contributions to stem cell-based tissue engineering research and regenerative medicine.

Efficacy of Simvastatin in Bone Regeneration After Surgical Removal of Mandibular Third Molars: A Clinical Pilot Study

INTRODUCTION

Simvastatin, a common cholesterol-lowering drug that inhibits hepatic hydroxymethylglutaryl coenzyme A reductase, the rate-limiting enzyme in the mevalonate pathway, increases expression of the BMP-2 gene and thus promotes bone regeneration.

MATERIALS AND METHODS

A study was conducted in mandibular third molar sockets to study the efficacy of the drug by implanting it into sockets (experimental group) and observations were made over 3 months to compare the healing with the (control group).

CONCLUSION

The results showed faster regeneration of the bone in the simvastatin site using the gray level histogram values.

Topical simvastatin improves the pro-angiogenic and pro-osteogenic properties of bioglass putty in the rat calvaria critical-size model

Objective was to describe the effect of bioactive glass putty with and without topical simvastatin on new bone formation in critical-sized defects of rat calvaria. A calvarial bone defect was created in 20 male Wistar rats and filled with bioactive glass alone (n = 10) or combined with simvastatin (n = 10). After 4 weeks, the defects were histomorphometrically evaluated for volume fraction (Vv) of woven bone, vessel density, bioglass quantity, and inflammation. Compared to the bioglass-only group, rats treated with simvastatin had greater Vv of blood vessels (3.3% ± 0.7 vs 1.6% ± 0.1, P = .0002) and new bone (2.3% ± 0.2 vs 1.8% ± 2.5, P = .003). The Vv of the bioglass remnants in the bioglass-only group was higher than in the group treated with simvastatin (2.4% ± 0.08 vs 1.7% ± 0.3, P < .0004). Chronic inflammation was noted in 1 rat from each group. Topical simvastatin seems to improve the pro-angiogenic and pro-osteogenic properties of bioglass putty in rat calvaria critical-size defects without significant inflammation.

Highly efficient release of simvastatin from simvastatin-loaded calcium sulphate scaffolds enhances segmental bone regeneration in rabbits

A number of clinical and experimental studies have investigated the effect of simvastatin on bone regeneration. In the present study, the release of simvastatin from simvastatin-loaded calcium sulphate (CS) scaffolds and the effect of these scaffolds on osteogenic differentiation of bone marrow-derived mesenchymal stem cells (MSCs) in vitro and the effect of simvastatin locally applied from CS scaffolds on bone regeneration were investigated. A total of 26 complete 1.2-cm bone defects were created in the ulna of rabbits, which were treated with CS, simvastatin-loaded CS or recombinant human bone morphogenetic protein 2 (rhBMP)-2-loaded CS. Simvastatin was highly efficiently released from simvastatin-loaded CS at the onset and stable release was maintained. Alkaline phosphatase was highly expressed in the MSCs co-cultured with simvastatin/CS scaffolds for 7 and 14 days. The defects treated with rhBMP-2-loaded CS and simvastatin-loaded CS showed significantly higher X-ray analysis scores and a larger amount of bone formation as determined by histology compared with the CS group (P<0.05). No significant differences in the X-ray score and bone formation were observed between groups with rhBMP-2-loaded CS and simvastatin-loaded CS (P>0.05). Simvastatin is capable of promoting osteogenic differentiation of MSCs in vitro and stimulating bone regeneration when locally released from CS scaffolds into bone defects. The beneficial effect of simvastatin was similar to that of rhBMP-2. In conclusion, the present study suggested that the simvastatin-loaded CS scaffolds may have great potential in bone tissue engineering.

Thermoresponsive biodegradable HEMA-lactate-Dextran-co-NIPA cryogels for controlled release of simvastatin

Abstract NIPA and HEMA-lactate-Dextran-based biodegradable and thermoresponsive cryogels were synthesized at different compositions by cryogelation. Chemical and morphological properties of the HEMA-lactate-Dextran-co-NIPA cryogel matrices were demonstrated by FTIR, SEM, and ESEM. Thermoresponsivity of the prepared cryogels was investigated by DSC, imaging NMR, and swelling studies. For possible use of the cryogels in potential bone tissue engineering applications, either hydrophobic simvastatin was embedded, or hydrophilic simvastatin was incorporated in the cryogels. Release profiles of simvastatin delivering cryogel scaffolds depending on their composition, hydrophobicity or hydrophilicity of loaded simvastatin and the medium temperature were demonstrated.

Demineralized bone matrix as a vehicle for delivering endogenous and exogenous therapeutics in bone repair

As a unique human bone extract approved for implant use, demineralized bone matrix (DBM) retains substantial amounts of endogenous osteoconductive and osteoinductive proteins. Commercial preparations of DBM represent a clinically accessible, familiar, widely used and degradable bone-filling device, available in composite solid, strip/piece, and semi-solid paste forms. Surgically placed and/or injected, DBM releases its constituent compounds to bone sites with some evidence for inducing new bone formation and accelerating healing. Significantly, DBM also has preclinical history as a drug carrier by direct loading and delivery of several important classes of therapeutics. Exogenous bioactive agents, including small molecule drugs, protein and peptide drugs, nucleic acid drugs and transgenes and therapeutic cells have been formulated within DBM and released to bone sites to enhance DBM's intrinsic biological activity. Local release of these agents from DBM directly to surgical sites in bone provides improved control of dosing and targeting of both endogenous and exogenous bioactivity in the context of bone healing using a clinically familiar product. Given DBM's long clinical track record and commercial accessibility in standard forms and sources, opportunities to formulate DBM as a versatile matrix to deliver therapeutic agents locally to bone sites in orthopedic repair and regenerative medicine contexts are attractive.

Targeting polymer therapeutics to bone

An aging population in the developing world has led to an increase in musculoskeletal diseases such as osteoporosis and bone metastases. Left untreated many bone diseases cause debilitating pain and in the case of cancer, death. Many potential drugs are effective in treating diseases but result in side effects preventing their efficacy in the clinic. Bone, however, provides a unique environment of inorganic solids, which can be exploited in order to effectively target drugs to diseased tissue. By integration of bone targeting moieties to drug-carrying water-soluble polymers, the payload to diseased area can be increased while side effects decreased. The realization of clinically relevant bone targeted polymer therapeutics depends on (1) understanding bone targeting moiety interactions, (2) development of controlled drug delivery systems, as well as (3) understanding drug interactions. The latter makes it possible to develop bone targeted synergistic drug delivery systems.

Dissolution medium responsive simvastatin release from biodegradable apatite cements and the therapeutic effect in osteoporosis rats

Bio-convertible artificial bone with slow release of anti-osteoporosis drug is useful to treat osteoporosis. Apatite cement containing 6% simvastatin (APD) had lower crystallinity than natural bone. In-vitro drug release tests in simulated body fluid (pH 7.8) and acetate buffer (pH 4.5) were performed at 37.0 C as physical models of osteoblast and osteoclast conditions (SOB and SOC). The device had lower drug release rate under SOB, but significantly higher rates under SOC. The simvastatin release rate changed depending on dissolution media, it repeated twice, and the rate under SOC was 15 times higher than under SOB. The device showed dissolution medium responsive drug release. After implantation of the APD in osteoporosis rats, the bone mineral density was evaluated by the x-ray computed tomography. The result indicated that the bone mineral density of APD implanted rat was significantly higher than that of control diseased. The result indicated that the device was therapeutically useful to bone regeneration.

Removal torque analysis of implants in rabbit tibia after topical application of simvastatin gel

The aim of this study was to evaluate the effects of topical application of simvastatin gel (7.5 mg) on the removal torque of titanium implants in the rabbit tibia. A total of 32 surgeries were performed on 16 New Zealand rabbits for the placement of 2 implants in 1 tibia of each rabbit. Only 1 of the surgical defects was injected with 30 mg/mL of simvastatin gel before implant placement. The initial torque was set at 20 N.cm, and removal torque testing was performed 28 and 56 days postoperatively with a Tonishi torque wrench. Surgical defects were divided into 4 groups: group IG-28 (test, 28 days), group IG-56 (test, 56 days), group I-28 (control, 28 days), and group I-56 (control, 56 days). Removal torque values were higher in group IG-56 than in groups IG-28, I-28, and I-56 (P < .05). Groups IG-28, I-28, and I-56 showed similar values (P > .05). Removal torque force increased under the influence of simvastatin, indicating that topical administration of a 7.5-mg dose of simvastatin gel is effective in improving the torque force required to remove implants inserted in the rabbit tibia.

Simvastatin induces osteogenic differentiation of murine embryonic stem cells

Statins are potent inhibitors of cholesterol synthesis. Several statins are available with different molecular and pharmacokinetic properties. Simvastatin is more lipophilic than pravastatin and has a higher affinity to phospholipid membranes than atorvastatin, allowing its passive diffusion through the cell membrane. In vitro studies on bone marrow stromal cells, osteoblast-like cells, and embryonic stem cells have shown statins to have cholesterol-independent anabolic effects on bone metabolism; alas, statins were supplemented in osteogenic medium, which does not facilitate elucidation of their potential osteoinductive properties. Embryonic stem cells (ESCs), derived from the inner cell mass of the blastocyst, are unique in that they enjoy perpetual self-proliferation, are pluripotent, and are able to differentiate toward all the cellular lineages composing the body, including the osteogenic lineage. Consequently, ESCs represent a potentially potent cell source for future clinical cellular therapies of various bone diseases, even though there are several hurdles that still need to be overcome. Herein we demonstrate, for the first time to our knowledge, that simvastatin induces murine ESC (mESC) differentiation toward the osteogenic lineage in the absence of osteoinductive supplements. Specifically, we found that a simvastatin concentration in the micromolar range and higher was toxic to the cells and that an effective concentration for osteoinduction is 0.1 nM, as shown by increased alizarin red staining as well as increased osteocalcin and osetrix gene expression. These results suggest that in the future, lipophilic simvastatin may provide a novel pharmacologic agent for bone tissue engineering applications.

The role of simvastatin in the osteogenesis of injectable tissue-engineered bone based on human adipose-derived stromal cells and platelet-rich plasma

An injectable tissue-engineered bone (ITB) composed of human adipose-derived stromal cells (hADSCs) and platelet-rich plasma (hPRP) was preliminarily constructed, but its osteogenic capability needs improving. This study aimed to evaluate if simvastatin can be applied as a bone anabolic agent for this ITB. We found 0.01 microm, 0.1 microm, and 1 microm simvastatin could induce hADSCs' osteoblastic differentiation in vitro that accompanied with non-inhibition on cell proliferation, high alkaline phosphatase activity, more mineralization deposition and more expression of osteoblast-related genes such as osteocalcin, core binding factor alpha1, bone morphogenetic protein-2, vascular endothelial growth factor, and basic fibroblast growth factor. Simvastatin at 1 mum seemed the most optimal concentration due to its high osteocalcin secretion in media (P < 0.01). Quantitative mineralization assay also showed 1 microm SIM had the most obvious synergistic effect on hPRP's induction for matrix mineralization of hADSCs (P < 0.01). When 1 microm Simvastatin was applied to this ITB to restore the critical-sized calvarial defects in mice, more bone formation was observed in defected regions, and the peripheries just outside the defect margins by X-ray analysis, and H&E staining. These findings indicate that simvastatin at optimal concentrations can be used to promote this ITB's osteogenesis. However, simvastatin's effects on this ITB await long-term investigation.

In vivo performance of simvastatin-loaded electrospun spiral-wound polycaprolactone scaffolds in reconstruction of cranial bone defects in the rat model

Reconstruction of large bone defects is still a major problem. Tissue-engineering approaches have become a focus in regeneration of bone. In particular, critical-sized defects do not ossify spontaneously. The use of electrospinning is attracting increasing attention in the preparation of tissue-engineering scaffolds. Recently, acellular scaffolds carrying bioactive agents have been used as scaffolds in "in situ" tissue engineering for soft and hard tissue repair. Poly(epsilon-caprolactone) (PCL) with two different molecular weights were synthesized, and the blends of these two were electrospun into nonwoven membranes composed of nanofibers/micropores. To stimulate bone formation, an active drug, "simvastatin" was loaded either after the membranes were formed or during electrospinning. The matrices were then spiral-wound to produce scaffolds with 3D-structures having both macro- and microchannels. Eight-millimeter diameter critical size cranial defects were created in rats. Scaffolds with or without simvastatin were then implanted into these defects. Samples from the implant sites were removed after 1, 3, and 6 months postimplantation. Bone regeneration and tissue response were followed by X-ray microcomputed tomography and histological analysis. These in vivo results exhibited osseous tissue integration within the implant and mineralized bone restoration of the calvarium. Both microCT and histological data clearly demonstrated that the more successful results were observed with the "simvastatin-containing PCL scaffolds," in which simvastatin was incorporated into the PCL scaffolds during electrospinning. For these samples, bone mineralization was quite significant when compared with the other groups.

Effects of the combination with alpha-tricalcium phosphate and simvastatin on bone regeneration

BACKGROUND

Although local application of statins stimulates bone formation, high dose of simvastatin induces inflammation.

OBJECTIVE

A study was conducted to test the hypothesis that maximum bone regeneration with less inflammation would be achieved by combining an optimal dose of simvastatin with alpha-tricalcium phosphate (alpha-TCP), which is an osteoconductive biomaterial capable of releasing the drug gradually.

MATERIAL AND METHODS

Bilateral 5-mm-diameter calvarial defects were created in adult Wistar rats and filled with preparations of different doses of simvastatin (0, 0.01, 0.1, 0.25 and 0.5 mg) combined with alpha-TCP particles or left empty. The animals were sacrificed at 2, 4 and 8 weeks and analyzed radiologically and histologically. Half of the animals of 4 and 8 weeks were labeled with fluorescence dyes and histomorphometrically analyzed.

RESULTS

Simvastatin doses of 0.25 and 0.5 mg caused inflammation of the soft tissue at the graft site whereas control and other doses did not. The micro-CT analysis revealed that the alpha-TCP with 0.1 mg simvastatin (TCP-0.1) group yielded significantly higher bone volumes than untreated control group at all three time points (249%, 227% and 266% at 2, 4 and 8 weeks, respectively). The percentage of defect closure, bone mineral content and bone mineral density were also higher in the TCP-0.1 group than in the other groups.

CONCLUSION

When combined with alpha-TCP particles, 0.1 mg simvastatin is the optimal dose for stimulation of the maximum bone regeneration in rat calvarial defects without inducing inflammation and it could be applied as an effective bone graft material.