Computer-assisted virtual technology in intracapsular condylar fracture with two resorbable long-screws

Long-term outcomes of open treatment of condylar head fractures using cannulated headless bone screws-a retrospective analysis

The treatment of mandibular fractures affecting the condylar head (CHF) can be either closed or open. In the case of an open approach, the headless bone screw (HBS) is an option. This study was performed to investigate the efficacy of osteosynthesis with HBS using three-dimensional radiographic imaging and clinical evaluation over long-term follow-up. This was a single-centre retrospective study. Clinical parameters and three-dimensional radiographic scans were collected during follow-up, DICOM datasets were segmented, and model analysis was conducted. Forty-five patients who received a HBS and met the eligibility criteria were included. There were significant improvements in all clinical parameters (mouth opening, protrusion, laterotrusion; all P < 0.05) except for the laterotrusion of the unaffected side (P = 0.071). Mean volume and surface area changes (from postoperative (mean 1.9 days) to final follow-up (mean 1675 days)) were 127.2 mm3 and -22.4 mm2, respectively, and were not statistically significant (P = 0.18 and P = 0.51). There were radiographic signs of condylar remodelling. Nine HBS in nine patients required removal due to the screw penetrating the articular surface of the healing condylar head. This single-centre retrospective study found good functional outcomes using HBS for CHF, with a screw removal rate of 20%.

Management of Mandibular Condylar Sagittal Fracture Accompanied by Lateral Condylar Crest Defect

BACKGROUND

The sagittal fracture of the mandibular condyle can be fixed with absorbable long screws. Absorbable long screws are generally inserted from the lateral crest of the condyle and are as close as possible to the medial pole of the condyle to obtain sufficient retention force. However, in clinical practice, patients with locally comminuted condylar fractures and partial defects in the lateral crest are often encountered. We validated the use of absorbable plates and long screws to fix mandibular condylar fractures with lateral crest defects, and postoperative follow-up showed good results.

METHODS

The preoperative design indicated that if conventional long screws were used, more soft tissue need to be pulled downward to achieve the appropriate drilling angle. If an absorbable plate was used, the degree of downward pulling of soft tissue was smaller, which can better protect the parotid gland tissue and facial nerve. The surgery was performed according to the preoperative design, using an absorbable plate scheme.

RESULTS AND DISCUSSION

Postoperative CT confirmed a stable anatomical reduction of condyle. Four-month follow-up showed that the patient's facial shape, occlusion, and mouth opening were all good. Follow-up CT showed good fracture healing. It is feasible to use absorbable plates and long absorbable screws to fix mandibular condylar sagittal fracture accompanied by lateral condylar crest defect.

Application of Crus of Helix Incision Through the Posterior Parotid Gland Approach in the Mid-Level or High-Level Mandibular Condylar Fractures

OBJECTIVE

This study is to explore the clinical effect of crus of helix incision through the posterior parotid gland approach in the treatment of Mid-or High-Level mandibular condylar fractures.

METHODS

From September 2020 to June 2023, we performed incision reduction internal fixation of 23 patients with mid-level or high-level fractures of the mandibular condylar through the approach of the posterior parotid gland, and observed the effect of the operation.

RESULTS

After a follow-up period of 6 to 12 months, all patients showed no signs of postoperative facial paralysis or salivary gland fistula. In addition, satisfactory scars were observed in the operation area, and the occlusion function had recovered well.

CONCLUSION

The approach of using a crus of helix incision through the posterior parotid gland proved to be an effective method for treating mid-level or high-level fractures of the condylar fractures. This technique offers several advantages, including adequate exposure, minimal facial nerve injury, ease of incision and reduction, inconspicuous scarring, and a more concealed incision.

Does surgical treatment of mandibular condyle head (diacapitular) fractures provide better outcomes than closed treatment? - a systematic review and meta-analysis

The choices for managing a condylar head fracture (CHF) of the mandible are either open surgical or closed functional treatments (CFT) and the decision depends on various factors. The purpose of this systematic review was to ascertain from the available literature whether the open method or CFT yields better outcomes in managing CHF. We have systematically reviewed published articles according to the PRISMA statement. The search was conducted in PubMed, Google Scholar, Semantic Scholar, and the Cochrane Library database for comparative studies about both open and closed treatments from inception until April 2023. The outcomes of interest were mouth opening (MO), protrusion, laterotrusion, postoperative pain, and malocclusion. Eight studies met the inclusion criteria. The review comprised of 326 cases, among which 177 were managed by open methods and 149 were treated by CFT. The incidence of postoperative malocclusion and pain were significantly less in the open group. MO was better in the open treatment group although this was not statistically significant. Protrusion and laterotrusion occurred slightly more in CFT, although these were also statistically not significant. Overall, meta-analysis favoured open methods of managing CHF. Although enough evidence exists for the use of open methods for selected condylar head fractures, CFT still demonstrated favourable outcomes in undisplaced fractures. The selection of a particular treatment method should be individualised on the basis of each particular case considering the risk/benefits. Further high quality randomised trials are needed to establish a therapeutic guideline.

Serious Condylar Head Absorption in Children With Intracapsular Condylar Fractures Treated Operatively With Long Screws

OBJECTIVE

This study was performed to explore bone remodelling in children with intracapsular condylar fractures after the condylar fracture fragments were fixed using long screws and to offer possible explanations about the underlying mechanism.

PATIENT AND METHODS

Records of children (less than 12 y old) who sustained intracapsular condylar fractures and fixed with long screws from May 2012 to January 2015 were retrieved. Age, gender, dates of injury, admission, and discharge, mechanism of trauma, location and pattern of fracture, other mandibular fractures, treatment methods, and time of review were recorded and analyzed. Image dates of pretreatments and posttreatments, including the date of review, were also recorded.

RESULTS

A total of 8 patients completed their follow-up, and all patients (n=5) who were followed up after more than 3 months showed serious resorption of the condylar head. The condylar head resorbed until the height (or articular surface) dropped and aligned with the surface of the screw. The shortest time of absorption, as shown by the computed tomography scan was 106 days, and the longest time was 171 days (average time of 141.8 d).

CONCLUSIONS

Intracapsular condyle fractures in children should be managed conservatively as much as possible. However, if the height of the fracture fragments drops remarkably, open reduction and rigid internal fixation become possible choices.

Modified Retromandibular Approach for the Management of Condylar Fractures of the Mandible

Condylar fractures of the mandible have been of particular interest to surgeons for decades, as there is a big debate regarding the management option: conservative versus surgical modality. Conservative treatment is the preferred treatment modality for condylar head (diacapitular) fractures. Currently, surgical modality is favored and surgeons are opting for open reduction and internal fixation for diacapitular fractures as it reestablishes the anatomical position of the fragments and disc, and permits immediate functional mobility of the jaw, thereby reducing the chances of occurrence of temporomandibular joint ankylosis. This case series enumerates the pros and cons of open reduction and internal fixation of condylar fractures of the mandible occurring at various levels using a modified retromandibular approach and highlights that this can be considered as one of the treatment options for condylar fractures.

Virtual surgical planning is a useful tool in the surgical management of mandibular condylar fractures

PURPOSE

The aim of this study is to evaluate the application value of virtual surgical planning in the management of mandibular condylar fractures and to provide a reliable reference.

METHODS

This was a prospective randomized controlled study and recruited 50 patients requiring surgical treatment for their mandibular condylar fractures. The inclusion criteria were patients (1) diagnosed with a condylar fracture by two clinically experienced doctors and required surgical treatment; (2) have given consent for the surgical treatment; and (3) had no contraindications to the surgery. Patients were excluded from this study if: (1) they were diagnosed with a non-dislocated or only slightly dislocated condylar fracture; (2) the comminuted condylar fracture was too severe to be treated with internal reduction and fixation; or (3) patients could not complete follow-up for 3 months. There were 33 male and 17 female patients with 33 unilateral condylar fractures and 17 bilateral condylar fractures included. The 50 patients were randomly (random number) divided into control group (25 patients with 35 sides of condylar fractures) and experimental group (25 patients with 32 sides of condylar fractures). Virtual surgical planning was used in the experimental group, but only clinical experience was used in the control group. The patients were followed up for 1, 3, 6 and 12 months after operation. Variables including the rate of perfect reduction by radiological analysis, the average distance of deviation between preoperative and postoperative CT measurements using Geomagic software and postoperative clinical examinations (e.g., mouth opening, occlusion) were investigated for outcome measurement. SPSS 19 was adopted for data analysis.

RESULTS

The average operation time was 180.60 min in the experimental group and 223.2 min in the control group. One week postoperatively, CT images showed that the anatomic reduction rate was 90.63% (29/32) in the experimental group and 68.57% (24/35) in the control group, revealing significant difference (X2 = 4.919, p = 0.027). Geomagic comparative analysis revealed that the average distance of deviation was also much smaller in the experimental group than that in the control group (0.639 mm vs. 0.995 mm; t = 3.824, p < 0.001).

CONCLUSION

These findings suggest that virtual surgical planning can assist surgeons in surgical procedures, reduce operative time, and improve the anatomic reduction rate & accuracy, and thus of value in the diagnosis and treatment of condylar fractures.

Bone Union Quality after Fracture Fixation of Mandibular Head with Compression Magnesium Screws

For some years now, fixation devices created with resorbable magnesium alloys for the mandibular head have been clinically available and are beginning to be used. It is thus valuable to evaluate the quality of unions in these cases. The aim of this study was radiological comparison of magnesium versus titanium open reduction and rigid fixations in the mandible condylar head. Thirty-one patients were treated for fractures of the mandibular head with magnesium WE43 alloy headless compression screws (diameter 2.3 mm) and, as a reference group, 29 patients were included with similar construction titanium screws (diameter 1.8 mm). The 12-month results of the treatment were evaluated by the texture analysis of CT. Near similar treatment results were found with magnesium screws in traditional titanium fixation. Magnesium screws result in a higher density of the bone structure in the mandibular head. Conclusions: The quantitative evaluation of bone union after surgical treatment of mandibular head fracture with magnesium compression headless screws indicates that stable consolidation was achieved. Undoubtedly, the resorption process of the screws was found to be incomplete after 12 months, evidenced by a marked densification of the bone structure at the fracture site.

Open Reduction Internal Fixation of Condylar Head/Diacapitular Fracture of Mandible: Case Series

Objective

Surgical management of condylar head is largely deferred due to the lack of appropriate armamentarium or instrumentation, restricted surgical access and risk of iatrogenic complications. Here we delineate open reduction internal fixation of condylar head fracture with various fixation modalities using specialized instrumentation for visualization and providing access for reduction with minimal complications.

Methods

A total of 21 patients were reported with condylar head fracture of mandible to the Department of Oral and Maxillofacial Surgery from January 2017 to June 2018. Three patients had bilateral condylar head fracture, making it a total of 24 fractures. All patients had clinical symptoms including deranged occlusion, limited mouth opening, jaw deviation and restricted mandibular movements. The radiological findings were dislocated or displaced condylar head medially or laterally. All patients were treated by open reduction internal fixation using lag screws or standard long screws.

Results

Among condylar head fractures, 19 of the study population were male and 2 were female. Distribution of age among the condylar head fractures ranges from 19 years to 40 years with the mean being 22 years. At the end of three-month follow-up, all patients had satisfactory results, both clinically and radiologically. The functional outcome of this study was found to be superior.

Conclusion

We recommend open reduction internal fixation of condylar head for patients with high risk of ankylosis, and it is possible without complications due to the availability of minimally invasive surgical access system.

Digital Design and Application of 3D Printed Surgical Guide for Long Screw Fixation of Condylar Sagittal Fracture

OBJECTIVE

To explore a digital solution for long screw fixation of condylar sagittal fracture, and to achieve accurate positioning of the long screw.

METHODS

The CT data of the patient with condylar sagittal fracture was imported into Materialise Mimics, and the fractures were reduced by virtual surgery. The surgical guide for long screw fixation was designed in Materialise 3-matic, and then 3D printed for intraoperative assistance.

RESULTS

With the help of the 3D printed surgical guide, the long screw used to fix condylar sagittal fracture was accurately positioned, which was completely consistent with the preoperative design.

CONCLUSION

The digitally designed 3D printed surgical guide is an effective way to achieve accurate positioning of the long screw fixation of condylar sagittal fracture.

Biomechanical evaluation of type p condylar head osteosynthesis using conventional small-fragment screws reinforced by a patient specific two-component plate

BACKGROUND

The aim of this study was to evaluate via finite element analysis (FEA) the biomechanical behavior of conventional small-fragment screws reinforced by a patient-specific plate in type p condylar head.

METHODS

A finite element model of the mandible was created using Mimics 12.1 software. A type p condylar head fracture was simulated in the right condyle, and the left condyle was used as a control. Two patterns of fixation were investigated: conventional two-screw fixation and the same fixation system reinforced with a small, patient-specific plate. Surface models were imported into the software Ansys 5.7for further volume mesh generation.

RESULTS

The highest stress gradients were observed in the cortical layer of the lateral fragment, located near the screw. The conventional fixation method resulted in equivalent stresses 2 to 10 times greater than the reinforced method. Rigidity of fixation in the reinforced method increased up to 1.25-3 times compared to the conventional two-screw technique.

CONCLUSION

This study's findings suggest significant benefits in unfavorable biomechanical conditions from reinforcement of the standard two-screw fixation of condylar head fractures with a small, patient-specific plate acting as a washer.

Application of CAD/CAM technology for surgical treatment of condylar head fractures: A preliminary study

Objectives

The aim of the present study was to improve the accuracy and reliability of ORIF in patients with condylar head fractures (CHFs) by developing a design for patient specific fixators, navigation and repositioning guides, as well as the algorithms of their clinical application.

Materials and methods

14 patients with 16 CHFs were treated by ORIF with the use of CAD/CAM technology. After virtual reduction of the bony fragments, the appropriate length and diameter of the screws was chosen. In biomechanically unfavorable cases (type p) patient specific reinforcement plates were used together with the positional screws for reinforcement of the bone-fixator system. And in cases of severely comminuted fractures patient specific 3-D plate was applied.

Results

The CT data, obtained immediately after the operation revealed the good anatomical reduction. Any deviations of the small fragments noted were near 1 mm in all cases. Postoperative clinical examination at 3 months follow up showed good occlusion and mouth opening not less than 3 cm in all patients. The lateral and anterior mobility of the mandible was restored with small limitations of protrusive mobility in 1 case. All the patients were satisfied with the outcomes.

Conclusions

The application of the CAD/CAM technologies and the new design of the surgical guides and patient specific reinforcement plates for CHFs helps to improve the accuracy and quality of fragments reduction and stability of fixation with minimal risks of intraoperative complications.

Clinical relevance

CAD/CAM technologies improve the clinical effectiveness of treatment patients with the CHFs.

Biomechanical Loading Comparison between Titanium and Bioactive Resorbable Screw Systems for Fixation of Intracapsular Condylar Head Fractures

Osteosynthesis resorbable materials made of uncalcined and unsintered hydroxyapatite (u-HA) particles, poly-L-lactide (PLLA), are bioresorbable, and these materials have feasible bioactive/osteoconductive capacities. However, their strength and stability for fixation in mandibular condylar head fractures remain unclear. This in vitro study aimed to assess the biomechanical strength of u-HA/PLLA screws after the internal fixation of condylar head fractures. To evaluate their biomechanical behavior, 32 hemimandible replicas were divided into eight groups, each consisting of single-screw and double-screw fixations with titanium or u-HA/PLLA screws. A linear load was applied as vertical and horizontal load to each group to simulate the muscular forces in condylar head fractures. Samples were examined for 0.5, 1, 2, and 3-mm displacement loads. Two screws were needed for stable fixation of the mandibular condylar head fracture during biomechanical evaluation. After screw fixation for condylar head fractures, the titanium screws model was slightly more resistant to vertical and horizontal movement with a load for a small displacement than the u-HA/PLLA screws model. There was no statistically significant difference with load for large displacements. The u-HA/PLLA screw has a low mechanical resistance under small displacement loading compared with titanium within the limits of the mandibular head fracture model study.

Are Magnesium Screws Proper for Mandibular Condyle Head Osteosynthesis?

Recently, magnesium alloys have gained a significant amount of recognition as potential biomaterials for degradable implants for craniofacial bone screws. Purpose: The aim of this work was to compare screws made specifically for mandibular head osteosynthesis from different materials. Materials and Methods: Screws measuring 14 mm made by one manufacturer specifically for mandibular head osteosynthesis out of the following materials were selected: magnesium (MgYREZr), titanium (Ti6Al7Nb), and polymer (PLGA). The axial pull-out strength and torsional properties were investigated. Results: Each type of screw presented different pull-out forces (Kruskal–Wallis test, p < 0.001). The magnesium screw had the highest pull-out force of 399 N (cracked without the screw out being pulled out), followed by the titanium screw, with a force of 340 N, and the PLGA screw, with a force of 138 N (always cracked at the base of the screw head without the screw being pulled out). ANOVA was performed for the maximal torques before damage to the screw (torsional properties), revealing that the maximal torque of the magnesium screw was 16 N·cm, while that of the titanium screw was 19 N·cm. The magnesium screw was significantly weaker than the titanium screw (p < 0.05). The measured torque and pull-out force were not related to each other (p > 0.05). Conclusion: Among the screws compared, the metal biodegradable magnesium screw seems to be the most suitable material for multiscrew mandibular head osteosynthesis, considering the condition of the fragile screwdriver socket.

Forces Causing One-Millimeter Displacement of Bone Fragments of Condylar Base Fractures of the Mandible after Fixation by All Available Plate Designs

Background: There has been no direct comparison of all existing plates dedicated for fracture osteosynthesis of mandibular condyle base until now. The aim of the study was to test mechanically all available designs of titanium plates on the market on polyurethane mandibles using an individually designed clamping system. Methods: Forces required for a 1 mm displacement of fixed fracture and incidents of screw loosening were recorded. Results indicated the best mechanical plates among all existing designs available. Results: It has occured that some of osseofixation plates should not be used any more, whereas some shape of the single plates are similar shape to two single plates shape are regarded as the best osseofixation method for condyle base fracture. Conclusion: General observation is the bigger plate and more screws, the better rigid stable osteosynthesis of mandibular condyle base. 4 plates of current designs of total 30 tested series can be recommended for open rigid internal fixation of fractures of the base of the mandibular condyle. The rest of 26 existing plates should not be used in condylar base fractures.

A comparative biomechanical evaluation of different osteosynthesis techniques used for intracapsular condylar head fractures

Purpose

The aim of the present experimental study was to evaluate the biomechanical behavior in different types of osteosynthesis (titanium screws, bioresorbable pins and miniplates) used in management of intracapsular condylar head fractures.

Method

Experimental models of the condylar head fractures were simulated on 15 dry human cadaveric mandibles. Osteotomized mandibles were randomly divided into three groups with different fixation systems used: 1) 15 mm long titanium screws, 2) 15 mm long bioresorbable pins Sonic Pins Rx, 3) T-shaped titanium miniplate and 7 mm long titanium screws. Mandibles were loaded in TIRAtest testing machine (Germany). The main types of deformations, including torsion, bending and shearing, were simulated to study the biomechanical characteristics of the fixation systems.

Results

Titanium bicortical screws demonstrated the highest stiffness in standard loading conditions. The fixation with bioresorbable pins showed lower stiffness in both frontal and sagittal loads. This is indicative of the fact that resorbable pins, which have numerous advantages for clinical usage, cannot provide adequately stable fixation in maximal masticatory loads. The mandibles fixed with T-shaped plate had the lowest stiffness.

Conclusion

Screw or pin fixation, regardless of the material used, was not resistant to rotational loads. On the contrary, the stiffness of T-shaped plates was quite significant. In real clinical conditions, if rotational displacements are not effectively compensated by irregularities in the fracture surface and precise repositioning of the bone fragments, combined use of miniplates and bicortical titanium screws or two screws can be beneficial.

Transmasseteric Anterior Parotid Approach for Treatment of Mandibular Subcondylar Fractures

This study demonstrated the application of transmasseteric anterior parotid approach for open reduction of mandibular subcondylar fractures depending on the basis of the anatomical study of the temporomandibular joint and parotid gland area. The anatomical study was performed on 5 Chinese adult cadavers fixed by 10% formalin. The temporomandibular joints and parotid regions were studied. In the clinical study, 26 patients with mandibular subcondylar fractures were recruited between July 2014 and December 2017. All 26 patients with mandibular subcondylar fractures received satisfactory occlusions and normal mouth opening: no postoperative facial paralysis occurred in these patients. It is crucial to know the anatomy of both temporomandibular joint and parotid region for reducing significantly the surgical trauma and complications. Transmasseteric anterior parotid approach is a feasible approach for the surgical treatment of the mandibular subcondylar fractures. This method can provide adequate exposure, minimal facial nerve injury, open reduction easily, and inconspicuous scarring.

Tomographic Evaluation of Mandibular Thickness on Premolar and Molar Regions Related to Monocortical Screws

The aim of this study was to measure the thickness of the mandible from the external cortical plate to the teeth roots on premolar and molar regions using CT scan to determine the safety margin for the application of monocortical screws for internal rigid fixation. Thirty-one patients underwent CT-scan imaging for surgical planning. The images were used to measure bilaterally the distance from the external cortex of the mandible to the roots of teeth on premolar and molar region by means of Dental Slice software (Bioparts Prototipagem Biomedica, Brasília, DF, Brazil). Mean, median, standard deviation, one-way ANOVA and post hoc Tukey's test were used for statistical analysis. No statistical differences for thickness were found between right and left side (p = 0.1652). The mean thickness for the left side was 4.17 ± 1.68 mm and for right side 3.93 ± 1.49 mm. Increase in mandibular thickness from anterior to posterior regions in both sides was observed and statistical difference was found among the different groups according to the measured region (p < 0.05). The present results can predict the safety zone for the use of monocortical screws in the mandible, but the use of CT scan is imperative and individual analysis is desired owing to anatomical variations. Further studies with larger samples are necessary to confirm these data and should include other anatomic structures, different regions of mandible/maxilla, as well as other ethnic groups.

Observational Study of Surgical Treatment of Sagittal Fractures of Mandibular Condyle

OBJECTIVE

This study was conducted to investigate the complications that occur after surgical treatment of sagittal fracture of the mandibular condyle (SFMC).

METHODS

A retrospective study was conducted on patients in whom SFMC was treated using surgical methods (87 patients, 105 sides) between January 1995 and December 2011 (79 sides were treated by rigid internal fixation and the remaining 26 sides were removed the condylar fragments). The longest follow-up was 17 years, and the shortest was 2 years. Follow-ups were conducted to assess mandibular activity, mouth opening, and computed tomography scans of condylar morphologic alterations. The postoperative complications were evaluated and the causes were analyzed.

RESULTS

We observed 3 patients with joint ankylosis (all of them were removed the condylar fragments); 8, mouth opening less than 30 mm; 23, deviation on mouth opening at 6 months. At 4 weeks, 19 patients had facial nerve weakness, which was resolved within 6 months. The radiological investigation showed complete remodeling in 56.2% of the condyles (in the 59 sides, 57 sides were treated by rigid internal fixation and 2 sides were removed the condylar fragments); partial remodeling 27.6% condyles (in the 29 sides, 20 sides were treated by rigid internal fixation and 9 sides were removed the condylar fragments); poor remodeling, 16.2% condyles (in the 17 sides, 2 sides were treated by rigid internal fixation and 15 sides were removed the condylar fragments).

CONCLUSIONS

Surgical treatment of SFMC is not perfect. There were some complications that occurred after the surgical treatment of SFMC. The findings also indicate that condylar anatomic reduction is the basis for functional recovery and, therefore, rigid fixation should be implemented. Furthermore, the removal of condylar fragments should be performed with caution, and if used, the fragments should be removed entirely.

Long-term results of ORIF of condylar head fractures of the mandible: A prospective 5-year follow-up study of small-fragment positional-screw osteosynthesis (SFPSO)

BACKGROUND

Optimum treatment of condylar head fractures (CHF) remains subject to controversy. There are currently a variety of alternative techniques applied, data in literature are often inconsistent and especially systematic long-term data on results after treatment by open reduction and internal fixation (ORIF) have so far not been available. This study in hand is the first long-term prospective study of ORIF after CHF based on osteosynthesis with 1.7 mm small-fragment positional screws (SFPSO)via a retroauricular transmeatal approach (RA).

METHODS

The study made use of radiologic, anatomic and objective functional parameters (axiography and MRI) to assess vertical height, disk mobility, protrusive and translatory movement as well as potential physical complaints. Included were surgical long-term sequelae after RA, such as incidence of stenosis of the auditory canal, the facial nerve and resulting disturbance of facial skin sensitivity. Retroauricular scars were evaluated according to the Vancouver Scar Scale. Helkimo and RDC/TMD indices were applied for patient's self-assessment of quality of life aspects after ORIF via RA. The sample in the first follow-up trial (FFT) in the years 2003-2004 comprised 26 patients (36 CHF). 22 patients (31 CHF) were re-evaluated in a second follow-up trial (SFT) between 2006 and 2008. A reference collective (43 patients, 56 CHF) treated with ORIF from 1993 to 2000 mainly by mini- or microplates (MMP) served as a surgical control group.

RESULTS

Five years after ORIF all fractured condyles (FC) continued to show stable anatomic restoration of the pre-trauma vertical height. FC treated with SFPSO exhibited a significantly superior range of motion (p < 0.05) of disk and condyle during mouth opening and protrusion compared to a previous MMP reference collective. Also, no difference was found between condylar mobility of FC five years after surgery and non-fractured condyles (NFC). SFPSO had thus successfully achieved a sustainable, stable physiological restoration of protrusive mobility of the articular disk and condyle. Remarkably, these long-term results were even slightly better in SFT vs. FFT (p < 0.05). Except for sporadically occurring minor complaints, the patients' subjective overall long-term perception of the success of the treatment was equally positive to the surgeons' objective assessment.

CONCLUSIONS

This first long-term prospective follow-up study, based on objective assessment tools, demonstrates that in all cases the major goals of ORIF in CHF could be fully achieved. These goals are: restoration of vertical height viz. prevention of occlusal disorders, physiological function of disk and condyle as well as of the lateral pterygoid muscle. Accordingly, ORIF of CHF e.g. with SFPSO and via the RA secures both a long-term functionally and anatomically stable result and as best as possible pain-free result for the patient, a central prerequisite of optimum perceived HRQoL. The paper has been amended by an extensive review part that covers the current knowledge of the major surgical aspects regarding the treatment of condylar head fractures.

Current opinions on surgical treatment of fractures of the condylar head

Treatment of mandibular condyle fractures is still controversial, with surgical treatment slowly becoming the preferred option. However, fractures of the condylar head (diacapitular fractures) are still treated conservatively at many institutions. Recently, more and more surgeons have begun to perform open treatment for diacapitular fractures because it allows to restore the anatomical position of the fragments and disc, it allows an immediate functional movement of the jaw, and avoid the ankylosis of the temporomandibular joint induced by the trauma. Several techniques have been proposed to reduce and fix fractures of the condylar head, such as standard bone screws, resorbable screws, resorbable pins, and cannulated lag screws. Therefore, the aim of this article is to review the literature about the surgical treatment of fractures of the condylar head to resume the current knowledge about open treatment of such fractures.

Clinical and radiological outcomes after treatment of sagittal fracture of mandibular condyle (SFMC) by using occlusal splint in children

This study was designed to investigate the effects of occlusal splints in the treatment of sagittal fractures of the mandibular condyle in children. From January 1995 to December 2011, 37 sagittal fractures of the mandibular condyle in 30 patients aged 4-8 years old were included in this study. All the patients were treated with 1-2mm occlusal splints in the molar region. The mouths of the patients were kept slightly open by the occlusal splints for 3-6 months, and we reviewed the clinical and radiological remodelling of the affected condyles after treatment. Excellent (n=20) and good (n=10) clinical outcomes were achieved with full radiological remodelling seen in 19 and partial remodelling in 11. Treatment with occlusal splints is effective in delivering good results and function with minimal morbidity in children with sagittal fractures of the condyle, while permitting ongoing remodelling and growth in the short term.