Engineering three-dimensional cartilage- and bone-like tissues using human dermal fibroblasts and macroporous gelatine microcarriers

Advances in the role and mechanism of fibroblasts in fracture healing

With the development of social population ageing, bone fracture has become a global public health problem due to its high morbidity, disability and mortality. Fracture healing is a complex phenomenon involving the coordinated participation of immigration, differentiation and proliferation of inflammatory cells, angioblasts, fibroblasts, chondroblasts and osteoblasts which synthesize and release bioactive substances of extracellular matrix components, Mortality caused by age-related bone fractures or osteoporosis is steadily increasing worldwide as the population ages. Fibroblasts play an important role in the process of fracture healing. However, it is not clear how the growth factors and extracellular matrix stiffness of the bone-regeneration microenvironment affects the function of osteoblasts and fibroblasts in healing process. Therefore, this article focuses on the role of fibroblasts in the process of fracture healing and mechanisms of research progress.

Low-Intensity Nanosecond Pulsed Electric Field Accelerates Osteogenic Transformation of Human Dermal Fibroblasts by Enhancing Cell Pluripotency

Autologous human fibroblasts have the potential to differentiate into the osteogenic lineage under specific conditions and can be utilized for bone regeneration. However, their efficiency is currently unsatisfactory. Recently, low-intensity nanosecond pulsed electric field (nsPEF) stimulation has been demonstrated to enhance cell pluripotency by activating epigenetic regulatory pathways. In this study, human dermal fibroblasts were exposed to different intensities of nsPEF to assess whether these exposures resulted in changes in proliferation rate, calcium salt deposition, and expression of differentiation-related markers in different experimental groups. The results showed a significant increase in cell proliferation, pluripotency, bone marker expression, and osteogenic differentiation efficiency when stimulating cells with 5 kV/cm of nsPEF. However, cell proliferation and differentiation significantly decreased at 25 kV/cm. Additionally, the proliferation and efficiency of osteogenic differentiation were reduced when the nsPEF intensity was increased to 50 kV/cm. Treatment with a 5 kV/cm of nsPEF led to increased and concentrated expression of Yes-Associated Protein (YAP) in the nucleus. These observations suggest that human dermal fibroblasts possess a heightened potential to differentiate into osteogenic cells when activated with nsPEF at 5 kV/cm. Consequently, the nsPEF strengthening strategy shows promise for fibroblast-based tissue-engineered bone repair research.

Personalized 3D printed bone scaffolds: A review

3D printed bone scaffolds have the potential to replace autografts and allografts because of advantages such as unlimited supply and the ability to tailor the scaffolds' biochemical, biological and biophysical properties. Significant progress has been made over the past decade in additive manufacturing techniques to 3D print bone grafts, but challenges remain in the lack of manufacturing techniques that can recapitulate both mechanical and biological functions of native bones. The purpose of this review is to outline the recent progress and challenges of engineering an ideal synthetic bone scaffold and to provide suggestions for overcoming these challenges through bioinspiration, high-resolution 3D printing, and advanced modeling techniques. The article provides a short overview of the progress in developing the 3D printed scaffolds for the repair and regeneration of critical size bone defects. STATEMENT OF SIGNIFICANCE: Treatment of critical size bone defects is still a tremendous clinical challenge. To address this challenge, diverse sets of advanced manufacturing approaches and materials have been developed for bone tissue scaffolds. 3D printing has sparked much interest because it provides a close control over the scaffold's internal architecture and in turn its mechanical and biological properties. This article provides a critical overview of the relationships between material compositions, printing techniques, and properties of the scaffolds and discusses the current technical challenges facing their successful translation to the clinic. Bioinspiration, high-resolution printing, and advanced modeling techniques are discussed as future directions to address the current challenges.

Photothermal heating of titanium nitride nanomaterials for fast and uniform laser warming of cryopreserved biomaterials

Titanium nitride (TiN) is presented as an alternative plasmonic nanomaterial to the commonly used gold (Au) for its potential use in laser rewarming of cryopreserved biomaterials. The rewarming of vitrified, glass like state, cryopreserved biomaterials is a delicate process as potential ice formation leads to mechanical stress and cracking on a macroscale, and damage to cell walls and DNA on a microscale, ultimately leading to the destruction of the biomaterial. The use of plasmonic nanomaterials dispersed in cryoprotective agent solutions to rapidly convert optical radiation into heat, generally supplied by a focused laser beam, proposes a novel approach to overcome this difficulty. This study focuses on the performance of TiN nanoparticles (NPs), since they present high thermal stability and are inexpensive compared to Au. To uniformly warm up the nanomaterial solutions, a beam splitting laser system was developed to heat samples from multiple sides with equal beam energy distribution. In addition, uniform laser warming requires equal distribution of absorption and scattering properties in the nanomaterials. Preliminary results demonstrated higher absorption but less scattering in TiN NPs than Au nanorods (GNRs). This led to the development of TiN clusters, synthetized by nanoparticle agglomeration, to increase the scattering cross-section of the material. Overall, this study analyzed the heating rate, thermal efficiency, and heating uniformity of TiN NPs and clusters in comparison to GNRs at different solution concentrations. TiN NPs and clusters demonstrated higher heating rates and solution temperatures, while only clusters led to a significantly improved uniformity in heating. These results highlight a promising alternative plasmonic nanomaterial to rewarm cryopreserved biological systems in the future.

Inflammatory Immune Responses Trigger Rejection of Allogeneic Fibroblasts Transplanted into Mouse Skin

Fibroblasts, or their homolog stromal cells, are present in most tissues and play an essential role in tissue homeostasis and regeneration. As a result, fibroblast-based strategies have been widely employed in tissue engineering. However, while considered to have immunosuppressive properties, the survival and functionality of allogeneic fibroblasts after transplantation remain controversial. Here, we evaluated innate and adaptive immune responses against allogeneic fibroblasts following intradermal injection into different immune-deficient mouse strains. While allogeneic fibroblasts were rejected 1 week after transplantation in immunocompetent mice, rejection did not occur in immunodeficient γ chain–deficient NOD-SCID (NSG) mice. T-cell- and B-cell-deficient RAG1 knockout mice showed greater loss of fibroblasts by day 5 after transplantation compared with NSG mice (P ≤ 0.05) but prolonged persistence compared with wild-type recipient (P ≤ 0.005). Loss of fibroblasts correlated with the expression of proinflammatory chemokine genes and infiltration of myeloid cells in the transplantation site. Depletion of macrophages and neutrophils delayed rejection, revealing the role of innate immune cells in an early elimination of fibroblasts that is followed by T-cell-mediated rejection in the second week. These findings indicate that the application of allogeneic fibroblasts in tissue engineering products requires further improvements to overcome cell rejection by innate and adaptive immune cells.

Osteogenic differentiation of human mesenchymal stromal cells and fibroblasts differs depending on tissue origin and replicative senescence

The need for an autologous cell source for bone tissue engineering and medical applications has led researchers to explore multipotent mesenchymal stromal cells (MSC), which show stem cell plasticity, in various human tissues. However, MSC with different tissue origins vary in their biological properties and their capability for osteogenic differentiation. Furthermore, MSC-based therapies require large-scale ex vivo expansion, accompanied by cell type-specific replicative senescence, which affects osteogenic differentiation. To elucidate cell type-specific differences in the osteogenic differentiation potential and replicative senescence, we analysed the impact of BMP and TGF-β signaling in adipose-derived stromal cells (ASC), fibroblasts (FB), and dental pulp stromal cells (DSC). We used inhibitors of BMP and TGF-β signaling, such as SB431542, dorsomorphin and/or a supplemental addition of BMP-2. The expression of high-affinity binding receptors for BMP-2 and calcium deposition with alizarin red S were evaluated to assess osteogenic differentiation potential. Our study demonstrated that TGF-β signaling inhibits osteogenic differentiation of ASC, DSC and FB in the early cell culture passages. Moreover, DSC had the best osteogenic differentiation potential and an activation of BMP signaling with BMP-2 could further enhance this capacity. This phenomenon is likely due to an increased expression of activin receptor-like kinase-3 and -6. However, in DSC with replicative senescence (in cell culture passage 10), osteogenic differentiation sharply decreased, and the simultaneous use of BMP-2 and SB431542 did not result in further improvement of this process. In comparison, ASC retain a similar osteogenic differentiation potential regardless of whether they were in the early (cell culture passage 3) or later (cell culture passage 10) stages. Our study elucidated that ASC, DSC, and FB vary functionally in their osteogenic differentiation, depending on their tissue origin and replicative senescence. Therefore, our study provides important insights for cell-based therapies to optimize prospective bone tissue engineering strategies.

Transplantation of autologous cells and porous gelatin microcarriers to promote wound healing

Definitive treatment to achieve wound healing in major burns frequently include skin transplantation, where split-thickness skin grafts is considered gold standard. This method is associated with several drawbacks. To overcome these hurdles, efforts have been made to develop tissue engineered skin substitutes, often comprised of a combination of cells and biomaterials. In the present study, we aimed to investigate transplantation of autologous keratinocytes and fibroblasts seeded on porous gelatin microcarriers using a porcine wound model. Pre-seeded microcarriers were transplanted to a total of 168 surgical full-thickness wounds (2cm diameter) on eight adult female pigs and covered with occlusive dressings. The experimental groups included wounds transplanted with microcarriers seeded with the combination of keratinocytes and fibroblasts, microcarriers seeded with each cell type individually, microcarriers without cells, each cell type in suspension, and NaCl control. Wounds were allowed to heal for one, two, four or eight weeks before being excised and fixated for subsequent histological and immunohistochemical analysis. In vitro, we confirmed that viable cells populate the surface and the pores of the microcarriers. In vivo, the microcarriers were to a large extent degraded after two weeks. After one week, all treatment groups, with the exception of microcarriers alone, displayed significantly thicker neo-epidermis compared to controls. After two weeks, wounds transplanted with microcarriers seeded with cells displayed significantly thicker neo-epidermis compared to controls. After four weeks there was no difference in the thickness of neo-epidermis. In conclusion, the experiments performed illustrate that autologous cells seeded on porous gelatin microcarriers stimulates the re-epithelialization of wounds. This method could be a promising candidate for skin transplantation. Future studies will focus on additional outcome parameters to evaluate long-term quality of healing following transplantation.

Elastin-like recombinamers in collagen-based tubular gels improve cell-mediated remodeling and viscoelastic properties

The partial substitution of collagen with elastin-like recombinamers in tubular gels improves cell-mediated remodeling, elastic moduli and strength during maturation.

P34HB electrospun fibres promote bone regeneration in vivo

Objective

Bone tissue engineering was introduced in 1995 and provides a new way to reconstruct bone and repair bone defects. However, the design and fabrication of suitable bionic bone scaffolds are still challenging, and the ideal scaffolds in bone tissue engineering should have a three‐dimensional porous network, good biocompatibility, excellent biodegradability and so on. The purpose of our research was to investigate whether a bioplasticpoly3‐hydroxybutyrate4‐hydroxybutyrate (P34HB) electrospun fibre scaffold is conducive to the repair of bone defects, and whether it is a potential scaffold for bone tissue engineering.

Materials and methods

The P34HB electrospun fibre scaffolds were prepared by electrospinning technology, and the surface morphology, hydrophilicity, mechanical properties and cytological behaviour of the scaffolds were tested. Furthermore, a calvarial defect model was created in rats, and through layer‐by‐layer paper‐stacking technology, the P34HB electrospun fibre scaffolds were implanted into the calvarial defect area and their effect on bone repair was evaluated.

Results

The results showed that the P34HB electrospun fibre scaffolds are interwoven with several fibres and have good porosity, physical properties and chemical properties and can promote cell adhesion and proliferation with no cytotoxicity in vitro. In addition, the P34HB electrospun fibre scaffolds can promote the repair of calvarial defects in vivo.

Conclusions

These results demonstrated that the P34HB electrospun fibre scaffold has a three‐dimensional porous network with good biocompatibility, excellent biosafety and ability for bone regeneration and repair; thus, the P34HB electrospun fibre scaffold is a potential scaffold for bone tissue engineering.

Tissue Engineering in Hand Surgery: A Technology Update

The field of hand surgery is constantly evolving to meet the challenges of repairing intricate anatomical structures with limited availability of donor tissue. The past 10 years have seen an exponential growth in tissue engineering, which has broadened the perspectives of tackling these age-old problems. Various fabrication techniques such as melt electrospinning and fused deposition modelling have been employed to synthesize 3-dimensional bioscaffolds that can be used to replace lost tissue. These bioscaffolds with strategic biomimicry have been shown to allow for integrative and functional repair of tissue injuries. This review article summarizes the most current advances in tissue engineering and its applications in the field of hand surgery. It outlines the current tissue engineering techniques commonly used for tackling musculoskeletal problems and highlights the most promising approaches according to clinical evidence. In particular, the paper explores regenerative medicine concepts applied to specific tissues including nerve, bone, cartilage, tendon, ligament, and vessels. In the face of innovative and pioneering research, tissue engineering will undoubtedly play a key role in reconstructive hand surgery in the not too distant future.

Proliferation and osteogenic activity of fibroblasts induced with fibronectin

The aim of this study was to determine the proliferation and osteogenic activity of fibroblasts induced with fibronectin and their possible dose-dependent relationship. The fibroblasts obtained by tissue explants adherent method were induced with fibronectin at different concentrations of 0, 10, 20, 40, 60, and 80 μg/mL for 14 days. The ³H-thymidine and ³H-proline incorporation test was used to evaluate the synthesis of DNA and collagen by fibroblasts, respectively. The mineralized nodules and osteocalcin secretion, as vital osteogenic indicators, were detected with tetracycline labeling and ¹²⁵I-labeled competitive immunoassay, respectively. Fibronectin significantly increased the synthesis of DNA and collagen by fibroblasts, especially at the concentration of 40 μg/mL (P<0.05). The increased secretion of osteocalcin in the supernatant was also statistically significant at the concentration of 40 μg/mL (P<0.05). The mineralized nodules with trabecula-like structure derived from induced fibroblasts were positive for tetracycline labeling. The granulation tissue-derived fibroblasts induced with fibronectin exhibited increased proliferative, functional and osteogenic potential. Fibroblasts are considered a possible in situ stem cell in tissue engineering.

Concise Review: Human Dermis as an Autologous Source of Stem Cells for Tissue Engineering and Regenerative Medicine

The exciting potential for regenerating organs from autologous stem cells is on the near horizon, and adult dermis stem cells (DSCs) are particularly appealing because of the ease and relative minimal invasiveness of skin collection. A substantial number of reports have described DSCs and their potential for regenerating tissues from mesenchymal, ectodermal, and endodermal lineages; however, the exact niches of these stem cells in various skin types and their antigenic surface makeup are not yet clearly defined. The multilineage potential of DSCs appears to be similar, despite great variability in isolation and in vitro propagation methods. Despite this great potential, only limited amounts of tissues and clinical applications for organ regeneration have been developed from DSCs. This review summarizes the literature on DSCs regarding their niches and the specific markers they express. The concept of the niches and the differentiation capacity of cells residing in them along particular lineages is discussed. Furthermore, the advantages and disadvantages of widely used methods to demonstrate lineage differentiation are considered. In addition, safety considerations and the most recent advancements in the field of tissue engineering and regeneration using DSCs are discussed. This review concludes with thoughts on how to prospectively approach engineering of tissues and organ regeneration using DSCs. Our expectation is that implementation of the major points highlighted in this review will lead to major advancements in the fields of regenerative medicine and tissue engineering.

SIGNIFICANCE

Autologous dermis-derived stem cells are generating great excitement and efforts in the field of regenerative medicine and tissue engineering. The substantial impact of this review lies in its critical coverage of the available literature and in providing insight regarding niches, characteristics, and isolation methods of stem cells derived from the human dermis. Furthermore, it provides analysis of the current state-of-the-art regenerative approaches using human-derived dermal stem cells, with consideration of current guidelines, to assist translation toward therapeutic use.

Past, present, and future of microcarrier-based tissue engineering

The top issue in tissue engineering is how to obtain more seed cells quickly and to preserve their characteristic morphology during in vitro expansion culture of cells. Microcarriers can help to amplify cell numbers and maintain the appropriate phenotype for tissue repair and restoration of function. In addition, microtissue with cell microcarriers can be used to repair diseased tissues or organs. This review introduces the materials used for, and classification of, microcarriers and the improvements in, and potential applications of, microtissues with cell microcarriers in tissue engineering.

Biomimetic approaches in bone tissue engineering: Integrating biological and physicomechanical strategies

The development of responsive biomaterials capable of demonstrating modulated function in response to dynamic physiological and mechanical changes in vivo remains an important challenge in bone tissue engineering. To achieve long-term repair and good clinical outcomes, biologically responsive approaches that focus on repair and reconstitution of tissue structure and function through drug release, receptor recognition, environmental responsiveness and tuned biodegradability are required. Traditional orthopedic materials lack biomimicry, and mismatches in tissue morphology, or chemical and mechanical properties ultimately accelerate device failure. Multiple stimuli have been proposed as principal contributors or mediators of cell activity and bone tissue formation, including physical (substrate topography, stiffness, shear stress and electrical forces) and biochemical factors (growth factors, genes or proteins). However, optimal solutions to bone regeneration remain elusive. This review will focus on biological and physicomechanical considerations currently being explored in bone tissue engineering.

Dynamic cell culture on porous biopolymer microcarriers in a spinner flask for bone tissue engineering: a feasibility study

Porous microspherical carriers have great promise for cell culture and tissue engineering. Dynamic cultures enable more uniform cell population and effective differentiation than static cultures. Here we applied dynamic spinner flask culture for the loading and multiplication of cells onto porous biopolymer microcarriers. The abilities of the microcarriers to populate cells and to induce osteogenic differentiation were examined and the feasibility of in vivo delivery of the constructs was addressed. Over time, the porous microcarriers enabled cell adhesion and expansion under proper dynamic culture conditions. Osteogenic markers were substantially expressed by the dynamic cell cultures. The cell-cultured microcarriers implanted in the mouse subcutaneous tissue for 4 weeks showed excellent tissue compatibility, with minimal inflammatory signs and significant induction of bone tissues. This first report on dynamic culture of porous biopolymer microcarriers providing an effective tool for bone tissue engineering.

Isolation and characterization of multipotent cells from human fetal dermis

We report that cells from human fetal dermis, termed here multipotent fetal dermal cells, can be isolated with high efficiency by using a nonenzymatic, cell outgrowth method. The resulting cell population was consistent with the definition of mesenchymal stromal cells by the International Society for Cellular Therapy. As multipotent fetal dermal cells proliferate extensively, with no loss of multilineage differentiation potential up to passage 25, they may be an ideal source for cell therapy to repair damaged tissues and organs. Multipotent fetal dermal cells were not recognized as targets by T lymphocytes in vitro, thus supporting their feasibility for allogenic transplantation. Moreover, the expansion protocol did not affect the normal phenotype and karyotype of cells. When compared with adult dermal cells, fetal cells displayed several advantages, including a greater cellular yield after isolation, the ability to proliferate longer, and the retention of differentiation potential. Interestingly, multipotent fetal dermal cells expressed the pluripotency marker SSEA4 (90.56 ± 3.15% fetal vs. 10.5 ± 8.5% adult) and coexpressed mesenchymal and epithelial markers (>80% CD90(+)/CK18(+) cells), coexpression lacking in the adult counterparts isolated under the same conditions. Multipotent fetal dermal cells were able to form capillary structures, as well as differentiate into a simple epithelium in vitro, indicating skin regeneration capabilities.

Chondrogenic potential of human dermal fibroblasts in a contractile, soft, self-assembling, peptide hydrogel

The present paper describes a simple approach to obtain three-dimensional (3D) cartilage constructs using human normal dermal fibroblasts (hNDFs) cultured in a self-assembling peptide nanofibre scaffold. During the first days of culture, the 3D constructs underwent morphological changes consisting of a substantial contraction process that ended in a small compact structure. During this process the system became sensitive to induction with standard chondrogenic medium, evidenced by the expression of specific markers of mature cartilage. First, it was detected that the samples become highly stained with toluidine blue dye over time (40-50 days), indicating that the system produced significantly high amounts of glycosaminoglycans. By quantitative PCR, it was confirmed that the system significantly upregulated the expression of the proteoglycan aggrecan, a good indicator of cartilage commitment. Moreover, collagen type II was upregulated at protein level, confirming that the system differentiated to a chondrocyte-like construct. Additionally, during the first days of culture in control medium analysed hNDFs proliferation capacity in this 3D system was analysed. This platform could be used in the future to obtain an autologous source of cells from a simple patient skin biopsy, which could be easily translated into a low-cost and effective regenerative therapy.

A temperature-cured dissolvable gelatin microsphere-based cell carrier for chondrocyte delivery in a hydrogel scaffolding system

In this study, a novel therapeutic cell delivery methodology in the form of hydrogel encapsulating cell-laden microspheres was developed and investigated. As a model cell for cartilage tissue engineering, chondrocytes were successfully encapsulated in gelatin-based microspheres (mostly of diameter 50-100 μm, centred at 75-100 μm) with high cell viability during the formation of microspheres via a water-in-oil single emulsion process under a low temperature without any chemical treatment. These cell-laden microspheres were then encapsulated in alginate-based hydrogel constructs. By elevating the temperature to 37°C, the cell-laden microspheres were completely dissolved within 2 days, resulting in the same number of same-sized spherical cavities in hydrogel bulk, along with which the encapsulated cells were released from the microspheres and suspended inside the cavities to be cultivated for further development. In this cell delivery system, the microspheres played a dual role as both removable cell vehicles and porogens for creation of the intra-hydrogel cavities, in which the delivered cells were provided with both free living spaces and a better permeable environment. This temperature-cured dissolvable gelatin microsphere-based cell carrier (tDGMC) associating with cell-laden hydrogel scaffold was attempted and evaluated through WST-1, quantitative polymerase chain reaction, biochemical assays and various immunohistochemistry and histology stains. The results indicate that tDGMC technology can facilitate the delivery of chondrocytes, as a non-anchorage-dependent therapeutic cell, with significantly greater efficiency.

Cell expansion of human articular chondrocytes on macroporous gelatine scaffolds-impact of microcarrier selection on cell proliferation

This study investigates human chondrocyte expansion on four macroporous gelatine microcarriers (CultiSpher) differing with respect to two manufacturing processes-the amount of emulsifier used during initial preparation and the gelatine cross-linking medium. Monolayer-expanded articular chondrocytes from three donors were seeded onto the microcarriers and cultured in spinner flask systems for a total of 15 days. Samples were extracted every other day to monitor cell viability and establish cell counts, which were analysed using analysis of variance and piecewise linear regression. Chondrocyte densities increased according to a linear pattern for all microcarriers, indicating an ongoing, though limited, cell proliferation. A strong chondrocyte donor effect was seen during the initial expansion phase. The final cell yield differed significantly between the microcarriers and our results indicate that manufacturing differences affected chondrocyte densities at this point. Remaining cells stained positive for chondrogenic markers SOX-9 and S-100 but extracellular matrix formation was modest to undetectable. In conclusion, the four gelatine microcarriers supported chondrocyte adhesion and proliferation over a two week period. The best yield was observed for microcarriers produced with low emulsifier content and cross-linked in water and acetone. These results add to the identification of optimal biomaterial parameters for specific cellular processes and populations.

Large-scale production of murine embryonic stem cell-derived osteoblasts and chondrocytes on microcarriers in serum-free media

The generation of tissue-engineered constructs from stem cells for the treatment of musculoskeletal diseases may have immense impact in regenerative medicine, but there are difficulties associated with stem cell culture and differentiation, including the use of serum. Here we present serum-free protocols for the successful production of murine embryonic stem cell (mESC) derived osteoblasts and chondrocytes on CultiSpher S macroporous microcarriers in stirred suspension bioreactors. Various inoculum forms and agitation rates were investigated. Produced osteogenic cells were implanted ectopically into SCID mice and orthotopically into a murine burr-hole fracture model. Osterix, osteocalcin and collagen type I were upregulated in osteogenic cultures, while aggrecan and collagen type II were upregulated in chondrogenic cultures. Histological analysis using alizarin red S, von Kossa and alcian blue staining confirmed the presence of osteoblasts and chondrocytes, respectively in cultured microcarriers and excised tissue. Finally, implantation of derived cells into a mouse fracture model revealed cellular integration without any tumor formation. Overall, microcarriers may provide a supportive scaffold for ESC expansion and differentiation in a serum-free bioprocess for in vivo implantation. These findings lay the groundwork for the development of clinical therapies for musculoskeletal injuries and diseases using hESCs and iPS cells.

Polymer-based microparticles in tissue engineering and regenerative medicine

Different types of biomaterials, processed into different shapes, have been proposed as temporary support for cells in tissue engineering (TE) strategies. The manufacturing methods used in the production of particles in drug delivery strategies have been adapted for the development of microparticles in the fields of TE and regenerative medicine (RM). Microparticles have been applied as building blocks and matrices for the delivery of soluble factors, aiming for the construction of TE scaffolds, either by fusion giving rise to porous scaffolds or as injectable systems for in situ scaffold formation, avoiding complicated surgery procedures. More recently, organ printing strategies have been developed by the fusion of hydrogel particles with encapsulated cells, aiming the production of organs in in vitro conditions. Mesoscale self-assembly of hydrogel microblocks and the use of leachable particles in three-dimensional (3D) layer-by-layer (LbL) techniques have been suggested as well in recent works. Along with innovative applications, new perspectives are open for the use of these versatile structures, and different directions can still be followed to use all the potential that such systems can bring. This review focuses on polymeric microparticle processing techniques and overviews several examples and general concepts related to the use of these systems in TE and RE applications. The use of materials in the development of microparticles from research to clinical applications is also discussed.

Markers distinguishing mesenchymal stem cells from fibroblasts are downregulated with passaging

Expansion of plastic-adherent bone marrow-derived mesenchymal stem cells (MSCs) results in gradual loss of osteogenic potential after passage 5-6. One explanation is contamination of MSC cultures with mature cells including fibroblasts. Identification and elimination of fibroblasts from MSC cultures could improve MSC yield and differentiation potential and also prevent tumor formation after MSC transplantation. However, no specific markers currently exist that can reliably discriminate between MSCs and fibroblasts. Flow cytometry analysis demonstrated that markers currently used to define MSCs, such as CD105, CD166, CD90, CD44, CD29, CD73, and CD9, are also expressed on human skin or lung fibroblasts. However, the level of expression of CD166 was significantly higher and that of CD9 was significantly lower in MSCs than in fibroblasts. CD146 was expressed only in MSCs. Using small focused microarrays, new markers differentially expressed in MSCs and fibroblasts were identified. Real-time polymerase chain reaction confirmed that expression of CD106, integrin alpha 11, and insulin-like growth factor-2 in MSCs was at least 10-fold higher than in fibroblasts; whereas expression of matrix metalloproteinase 1 and matrix metalloproteinase 3 was almost 100-fold lower. Flow cytometry and immunostaining demonstrated that CD106 protein expression on cell surface could be upregulated in MSCs but not in fibroblasts by the treatment with tumor necrosis factor-alpha. Comparison of surface expression of commonly used and newly identified MSC markers in MSCs cultures of passage 2 and passage 6 demonstrated that CD106 (with and without tumor necrosis factor-alpha treatment), integrin alpha 11, and CD146 were downregulated in MSCs of passage 6, and CD9 was upregulated; whereas all other markers did not change. Newly identified markers that have robust differences of expression in MSCs and fibroblasts on gene and protein level could be used for quality control of MSC cultures after expansion, cryopreservation, gene transfection, and other manipulations.

In vitro and in vivo osteogenesis of porcine skin-derived mesenchymal stem cell-like cells with a demineralized bone and fibrin glue scaffold

In vitro and in vivo osteogenesis of skin-derived mesenchymal stem cell-like cells (SDMSCs) with a demineralized bone (DMB) and fibrin glue scaffold were compared. SDMSCs isolated from the ears of adult miniature pigs were evaluated for the expression of transcriptional factors (Oct-4, Sox-2, and Nanog) and MSC marker proteins (CD29, CD44, CD90, and vimentin). The isolated SDMSCs were cocultured in vitro with a mixed DMB and fibrin glue scaffold in a nonosteogenic medium for 1, 2, and 4 weeks. Osteonectin, osteocalcin, and Runx2 were expressed during the culture period and reached maximum at 2 weeks after in vitro coculture. von Kossa-positive bone minerals were also noted in the cocultured medium at 4 weeks. Autogenous porcine SDMSCs (1 x 10(7)) labeled with a tracking dye, PKH26, were grafted into the maxillary sinus with a DMB and fibrin glue scaffold. In the contralateral side, only a scaffold was grafted without SDMSCs (control). In vivo osteogenesis was evaluated from two animals euthanized at 2 and 4 weeks after grafting. In vivo PKH26 staining was detected in all the specimens at both time points. Trabecular bone formation and osteocalcin expression were more pronounced around the grafted materials in the SDMSC-grafted group compared with the control group. New bone generation was initiated from the periphery to the center of the grafted material. The number of proliferating cells increased over time and reached a peak at 4 weeks in both in vivo and in vitro specimens. These findings suggest that autogenous SDMSC grafting with a DMB and fibrin glue scaffold can serve as a predictable alternative to bone grafting in the maxillary sinus floor.