The effects of mechanically loaded osteocytes and inflammation on bone remodeling in a bisphosphonate-induced environment

Biomechanical analysis of alveolar bones with compromised quality supporting a 4-unit implant bridge; a possible association with implant-related sequestration (IRS)

OBJECTIVES

This study aimed to investigate the strain in the bone surrounding dental implants supporting a 4-unit bridge and assess the role of excessive strain as a possible risk factor for implant related sequestration (IRS) or peri-implant medication-related osteonecrosis of the jaw (PI-MRONJ).

MATERIALS AND METHODS

A 3D-mandibular model was constructed using computed tomography and segmented it into cortical and cancellous bones. The 4-unit implant-supported bridges replacing the mandibular posteriors were constructed, and each featuring two, three, and four implants, respectively. The Young's modulus was assigned based on the quality of the bone. A maximum occlusal force of 200 N was applied to each implant in the axial and in a 30-degree oblique direction.

RESULTS

The maximum principal strain of the fatigue failure range (> 3000 µε) in the bone was analyzed. The volume fraction of fatigue failure was higher in poor-quality bone compared to normal bone and oblique load than in axial load. An increasing number of implants may dissipate excessive strain in poor-quality bones.

CONCLUSIONS

Occlusal force applied to poor-quality bone can result in microdamage. Given that unrepaired microdamage may initiate medication-related osteonecrosis of the jaw, long-term occlusal force on fragile bones might be a risk factor.

CLINICAL RELEVANCE

When planning implant treatment for patients with compromised bone status, clinical modifications such as strategic placement of implants and optimization of restoration morphology should be considered to reduce excessive strain which might be associated with IRS or PI-MRONJ.

Effect of agents affecting bone homeostasis on short- and long-term implant failure

OBJECTIVES

To review the current evidence on the relationship between agents that affect bone homeostasis and dental implant failures.

MATERIALS AND METHODS

Electronic searches for bisphosphonates, denosumab, methotrexate, corticosteroids, romosozumab, sunitinib, and bevacizumab were performed using PubMed, MEDLINE (OVID), EMBASE (OVID), Cochrane Central Register of Controlled Trials (Cochrane Library), Cochrane Oral Health Group Trials Register (Cochrane Library) and Web of Science (Thomson Reuters). Manual searches were also conducted to complement the digital searches for recent issues.

RESULTS

Previous publications suggested that bisphosphonates do not compromise the survival of dental implants. However, one study documented an increased risk of implant failure in patients who had received high-dose of intravenous bisphosphonate therapy after implant rehabilitation. There has been an issue of MRONJ around implants in patients who have successfully received implant therapy before and after antiresorptive therapy, leading to late implant failure. Despite evidence on the detrimental effects of denosumab, methotrexate and corticosteroids on bone metabolism, their role in implant survival is not conclusive.

CONCLUSIONS

At present, there is insufficient evidence to establish a potential connection between agents that affects bone homeostasis and implant failure. However, some studies have reported negative results for implant therapy. In addition, implant-related sequestration in patients who received anti-resorptive therapy, despite of successful osseointegration, is also noticeable. Although limited studies are available at present, clinicians should still carefully consider the potential hazards and take appropriate precautions to minimize the risks associated with the medications and implant therapy.

Osteogenesis and osteoclastogenesis on a chip: Engineering a self-assembling 3D coculture

Healthy bone is maintained by the process of bone remodeling. An unbalance in this process can lead to pathologies such as osteoporosis which are often studied with animal models. However, data from animals have limited power in predicting the results that will be obtained in human clinical trials. In search for alternatives to animal models, human in vitro models are emerging as they address the principle of reduction, refinement, and replacement of animal experiments (3Rs). At the moment, no complete in vitro model for bone-remodeling exists. Microfluidic chips offer great possibilities, particularly because of the dynamic culture options, which are crucial for in vitro bone formation. In this study, a scaffold free, fully human, 3D microfluidic coculture model of bone remodeling is presented. A bone-on-a-chip coculture system was developed in which human mesenchymal stromal cells differentiated into the osteoblastic lineage and self-assembled into scaffold free bone-like tissues with the shape and dimensions of human trabeculae. Human monocytes were able to attach to these tissues and to fuse into multinucleated osteoclast-like cells, establishing the coculture. Computational modeling was used to determine the fluid flow induced shear stress and strain in the formed tissue. Furthermore, a set-up was developed allowing for long-term (35 days) on-chip cell culture with benefits including continuous fluid-flow, low bubble formation risk, easy culture medium exchange inside the incubator and live cell imaging options. This on-chip coculture is a crucial advance towards developing in vitro bone remodeling models to facilitate drug testing.

Bone-on-a-chip platforms and integrated biosensors: Towards advanced in vitro bone models with real-time biosensing

Bone diseases, such as osteoporosis and bone defects, often lead to structural and functional deformities of the patient's body. Understanding the complicated pathophysiology and finding new drugs for bone diseases are in dire need but challenging with the conventional cell and animal models. Bone-on-a-chip (BoC) models recapitulate key features of bone at an unprecedented level and can potentially shift the paradigm of future bone research and therapeutic development. Nevertheless, current BoC models predominantly rely on off-chip analysis which provides only endpoint measurements. To this end, integrating biosensors within the BoC can provide non-invasive, continuous monitoring of the experiment progression, significantly facilitating bone research. This review aims to summarize research progress in BoC and biosensor integrations and share perspectives on this exciting but rudimentary research area. We first introduce the research progress of BoC models in the study of bone remodeling and bone diseases, respectively. We then summarize the need for BoC characterization and reported works on biosensor integration in organ chips. Finally, we discuss the limitations and future directions of BoC models and biosensor integrations as next-generation technologies for bone research.

Quantification of cell contractile behavior based on non-destructive macroscopic measurement of tension forces on bioprinted hydrogel

Contraction assay based on surface measurement have been widely used to evaluate cell contractility in 3D models. This method is straightforward and requires no specific equipment, but it does not provide quantitative data about contraction forces generated by cells. We expanded this method with a new biomechanical model, based on the work-energy theorem, to provide non-destructive longitudinal monitoring of contraction forces generated by cells in 3D. We applied this method on hydrogels seeded with either fibroblasts or osteoblasts. Hydrogel mechanical characteristics were modulated to enhance (condition HCA_High: hydrogel contraction assay high contraction) or limit (condition HCA_Low: hydrogel contraction assay low contraction) cell contractile behaviors. Macroscopic measures were further correlated with cell contractile behavior and descriptive analysis of their physiology in response to different mechanical environments. Fibroblasts and osteoblasts contracted their matrix up to 47% and 77% respectively. Contraction stress peaked at day 5 with 1.1 10^-14 Pa for fibroblasts and 3.5 10^-14 Pa for osteoblasts, which correlated with cell attachment and spreading. Negligible contraction was seen in HCA_Low. Both fibroblasts and osteoblasts expressed α-SMA contractile fibers in HCA_High and HCA_Low. Failure to contract HCA_Low was attributed to increased cross-linking and resistance to proteolytic degradation of the hydrogel.

Effects of Osteocyte Shape on Fluid Flow and Fluid Shear Stress of the Loaded Bone

This study was conducted to better understand the specific behavior of the intraosseous fluid flow. We calculated the number and distribution of bone canaliculi around the osteocytes based on the varying shapes of osteocytes. We then used these calculated parameters and other bone microstructure data to estimate the anisotropy permeability of the lacunar-canalicular network. Poroelastic finite element models of the osteon were established, and the influence of the osteocyte shape on the fluid flow properties of osteons under an axial displacement load was analyzed. Two types of boundary conditions (BC) that might occur in physiological environments were considered on the cement line of the osteon. BC1 allows free fluid passage from the outer elastic restraint boundary, and BC2 is impermeable and allows no free fluid passage from outer displacement constrained boundary. They both have the same inner boundary conditions that allow fluid to pass through. Changes in the osteocyte shape altered the maximum value of pressure gradient (PG), pore pressure (PP), fluid velocity (FV), and fluid shear stress (FSS) relative to the reference model (spherical osteocytes). The maximum PG, PP, FV, and FSS in BC2 were nearly 100% larger than those in BC1, respectively. It is found that the BC1 was closer to the real physiological environment. The fluid flow along different directions in the elongated osteocyte model was more evident than that in other models, which may have been due to the large difference in permeability along different directions. Changes in osteocyte shape significantly affect the degrees of anisotropy of fluid flow and porous media of the osteon. The model presented in this study can accurately quantify fluid flow in the lacunar-canalicular network.

Occlusal Trauma and Bisphosphonate-Related Osteonecrosis of the Jaw in Mice

Osteonecrosis of the jaw (ONJ) is a serious adverse event that is associated with antiresorptive agents, and it manifests as bone exposure in the maxillofacial region. Previous clinical reports suggest that mechanical trauma would trigger ONJ in a manner that is similar to tooth extractions. To the best of our knowledge, there have been few detailed pathophysiological investigations of the mechanisms by which occlusal/mechanical trauma influences ONJ. Here, we developed a novel mouse model that exhibits ONJ following experimental hyperocclusion and nitrogen-containing bisphosphonate (N-BP) treatment. This in vivo model exhibited ONJ in alveolar bone, particularly in the mandible. Moreover, the experimental hyperocclusion induced remarkable alveolar bone resorption in both mouse mandible and maxilla, whereas N-BP treatment completely prevented alveolar bone resorption. In this study, we also modeled trauma by exposing clumps of mesenchymal stem cells (MSCs)/extracellular matrix complex to hydrostatic pressure in combination with N-BP. Hydrostatic pressure loading induced lactate dehydrogenase (LDH) release by calcified cell clumps that were differentiated from MSCs; this LDH release was enhanced by N-BP priming. These in vivo and in vitro models may contribute further insights into the effect of excessive mechanical loading on ONJ onset in patients with occlusal trauma.

Impacts of bisphosphonates on the bone and its surrounding tissues: mechanistic insights into medication-related osteonecrosis of the jaw

Bisphosphonates are widely used as anti-resorptive agents for the treatment of various bone and joint diseases, including advanced osteoporosis, multiple myeloma, bone metastatic cancers, Paget's disease of bone, and rheumatoid arthritis. Bisphosphonates act as an anti-osteoclast via the induction of osteoclast apoptosis, resulting in a decreased rate of bone resorption. Unfortunately, there is much evidence to demonstrate that the long-term use of bisphosphonates is associated with osteonecrosis. The pathogenesis of osteonecrosis includes the death of osteoblasts, osteoclasts, and osteocytes. In addition, the functions of endothelial cells, epithelial cells, and fibroblasts are impaired in osteonecrosis, leading to disruptive angiogenesis, and delayed wound healing. Osteonecrosis is most commonly found in the jawbone and the term medication-related osteonecrosis of the jaw (MRONJ) has become the condition of greatest clinical concern among patients receiving bisphosphonates. Although surgical treatment is an effective strategy for the treatment of MRONJ, several non-surgical interventions for the attenuation of MRONJ have also been investigated. With the aim of increasing understanding around MRONJ, we set out to summarize and discuss the holistic effects of bisphosphonates on the bone and its surrounding tissues. In addition, non-surgical interventions for the attenuation of bisphosphonate-induced osteonecrosis were reviewed and discussed.

Mechanical stimuli-mediated modulation of bone cell function-implications for bone remodeling and angiogenesis

Bone remodeling, expressed as bone formation and turnover, is a complex and dynamic process closely related to its form and function. Different events, such as development, aging, and function, play a critical role in bone remodeling and metabolism. The ability of the bone to adapt to new loads and forces has been well known and has proven useful in orthopedics and insightful for research in bone and cell biology. Mechanical stimulation is one of the most important drivers of bone metabolism. Interestingly, different types of forces will have specific consequences in bone remodeling, and their beneficial effects can be traced using different biomarkers. In this narrative review, we summarize the major mediators and events in bone remodeling, focusing on the effects of mechanical stimulation on bone metabolism, cell populations, and ultimately, bone health.

Evaluation of a collagen matrix in a mandible defect in rats submitted to the use of bisphosphonates

Purpose:

To assess the effect of a collagen matrix (Mucograft^®) on the inflammatory process in a semi-critical experimental defect model in rats treated with bisphosphonates.

Methods:

Eighteen Wistar rats were randomly divided into three groups: saline (CG), alendronate (ALD) 5mg/kg (AG) or zoledronic acid (ZA) 0.2mg/kg (ZG). ALD was administered orally for 10 weeks and ZA was administered intravascularly on days 0, 7 and 14 and 49. On day 42, a 2mm defect was created and filled with Mucograft^® collagen matrix. The contralateral side was filled with a clot (control side). The animals were euthanized 70 days after the beginning of the experiment and the hemimandibles were radiographically and histologically (counting of empty osteocyte lacunae (%), apoptotic (%) and total osteoclasts, neutrophil and mononuclear inflammatory cells) analyzed. The variables were submitted to ANOVA/Bonferroni and t test (parametric data) (p <0.05, GraphPad Prism 5.0).

Results:

Significant bone repair occurred in the groups treated with Mucograft^®. High number of total inflammatory cells and neutrophils cells were showed in AG (p=0.026 and p=0.035) and AZ groups (p=0.005, p=0.034) on the control sides associated with delayed bone repair and the presence of devitalized bone tissue in AG and ZG on the Mucograft^® side.

Conclusion:

Mucograft^® collagen matrix attenuated the inflammatory process in a mandible defect in rats submitted to the use of bisphosphonates (AG and ZG).

Oral Rehabilitation With Dental Implants and the Importance of a Preventive Evaluation for Osteonecrosis of the Jaws Associated With Medications

Osteonecrosis of the jaw is a possible oral complication resulting from antiresorptive therapies, such as bisphosphonates (Bfs). Although the etiology is not entirely clear, it has been shown to be dependent on several factors, with the traumatic stimulation caused by the placement of teeth implants indicated as one of the predisposing factors to this pathology. The indications and preventive methods for performing these procedures have been questioned, making it essential to determine the proper protocols. Thus, the present study aims to discuss the risks of the development of osteonecrosis in patients undergoing dental implant surgery who use Bfs as well as to discuss related local and systemic factors and possible methods for preventing this side effect. The study also aims to present a clinical case of an osteopenic patient who used Bfs and underwent rehabilitation through implants according to specific protocols, which resulted in successful treatment.

Cellular considerations for optimizing bone cell culture and remodeling in a lab-on-a-chip platform

Our lab has developed a lab-on-a-chip platform for bone remodeling that enables long-term culturing of bone cells out to 7 weeks and serves as a foundation toward a multicellular organ-on-a-chip system. Here, we optimized culturing protocols for osteoblasts, osteoclasts and osteocytes within the lab-on-a-chip and performed functional activity assays for quantifying bone formation and resorption. We analyzed cell seeding densities, feeding schedules and time in culture as a basis for optimizing culturing protocols. Further, we addressed concerns of sterility, cytotoxicity and leakage during the extended culture period within the polydimethylsiloxane chip. This system provides a method for quantifying the soluble effects of mechanically stimulated osteocytes on bone remodeling (formation/resorption).