Microbial technology for the sustainable development of energy and environment

Toxic response of antimony in the Comamonas testosteroni and its application in soil antimony bioremediation

Antimony (Sb) is toxic to ecosystems and potentially to public health via its accumulation in the food chain. Bioavailability and toxicity of Sb have been reduced using various methods for the remediation of Sb-contaminated soil in most studies. However, Sb-contaminated soil remediation by microbial agents has been rarely evaluated. In this study, we evaluated the potential for the use of Comamonas testosteroni JL40 in the bioremediation of Sb-contamination. Strain JL40 immobilized more than 30 % of the Sb(III) in solution and oxidized over 18 % to Sb(V) for detoxification. Meanwhile, strain JL40 responds to Sb toxicity through such as Sb efflux, intracellular accumulation, biofilm production, and scavenging of reactive oxygen species (ROS), etc. The results of the pot experiment showed the average Sb content of the brown rice was decreased by 59.1%, 38.8%, and 48.4%, for 1.8, 50, and 100 mg/kg Sb spiked soils, respectively. In addition, the results of plant, soil enzyme activity, and rice agronomic trait observations showed that the application of strain JL40 could maintain the health of plants and soil and improve rice production. The single-step and sequential extraction of Sb from rhizosphere soil showed that strain JL40 also plays a role in Sb immobilization and oxidation in the soil environment. During rice potted cultivation, bacterial community analysis and plate counting showed that the strain JL40 could still maintain 103 CFU/g after 30 days of inoculation. With phenotypic and differential proteomics analysis, strain JL40 conferred Sb(III) tolerance by a combination of immobilization, oxidation, efflux and scavenging of ROS, etc. Our study demonstrates the application of Sb-immobilizing and oxidizing bacteria to lower soil Sb and reduce accumulation of Sb in rice. Our results provide guidance for bacterial remediation of Sb-contaminated soil.

Microbial cellulase production and its potential application for textile industries

Purpose

The textile industry’s previous chemical use resulted in thousands of practical particulate emissions, such as machine component damage and drainage system blockage, both of which have practical implications. Enzyme-based textile processing is cost-effective, environmentally friendly, non-hazardous, and water-saving. The purpose of this review is to give evidence on the potential activity of microbial cellulase in the textile industry, which is mostly confined to the realm of research.

Methods

This review was progressive by considering peer-reviewed papers linked to microbial cellulase production, and its prospective application for textile industries was appraised and produced to develop this assessment. Articles were divided into two categories based on the results of trustworthy educational journals: methods used to produce the diversity of microorganisms through fermentation processes and such approaches used to produce the diversity of microbes through microbial fermentation. Submerged fermentation (SMF) and solid-state fermentation (SSF) techniques are currently being used to meet industrial demand for microbial cellulase production in the bio textile industry.

Results

Microbial cellulase is vital for increasing day to day due to its no side effect on the environment and human health becoming increasingly important. In conventional textile processing, the gray cloth was subjected to a series of chemical treatments that involved breaking the dye molecule’s amino group with Cl − , which started and accelerated dye(-resistant) bond cracking. A cellulase enzyme is primarily derived from a variety of microbial species found in various ecological settings as a biotextile/bio-based product technology for future needs in industrial applications.

Conclusion

Cellulase has been produced for its advantages in cellulose-based textiles, as well as for quality enhancement and fabric maintenance over traditional approaches. Cellulase’s role in the industry was microbial fermentation processes in textile processing which was chosen as an appropriate and environmentally sound solution for a long and healthy lifestyle.

Production of Biosurfactant Using Bacillus subtilis Natto Fermentation

Biosurfactants are microbial amphiphiles produced as primary metabolites by varieties of microorganisms. They are preferred over chemically derived surfactants owing to their intrinsic properties, such as superior environmental compatibility, biodegradability, anti-inflammatory and antimicrobial activity, and higher tolerance towards extreme environmental conditions such as temperature, salinity, and pH levels. However, commercial production of biosurfactants is still lacking. The main reason for this is the low yields obtained from fermentation processes, which causes them to be unable to compete compared to chemical surfactants. The present study conducted a one-factor-at-a-time (OFAT) analysis on fermentation conditions to enhance biosurfactant yield from a probiotic strain, Bacillus subtilis Natto. The fermentation was conducted by varying parameters such as nitrogen source, vegetable oils, inoculum size, amino acids, and pH of the fermentation medium. Results showed a significant improvement of 45% in biosurfactant production from B. subtilis Natto when the initial pH of the fermentation medium was adjusted to pH 6.8, urea as the nitrogen source, inoculum size of 6% v/v and the addition of palm olein at a concentration of 2% v/v as a substrate in the fermentation medium.

Techno-Economic Analysis for Direct Processing of Wet Solid Residues Originated from Grain and Inedible Plant Wastes

Large number of solid wastes is produced from ethanol and wine plants sourcing from grain and inedible plant wastes, for example, WDGS (wet distiller's grain with soluble) and DDGS (dry distiller's grain with soluble) produced from ethanol plants using corn. This study investigates alternative methods for using these co-products through combustion and anaerobic digestion. Process simulation and economic analysis were conducted using current market prices to evaluate the viability of the processes. Products in the form of energy are produced. Optimization of the corn ethanol plant was also explored for re-using the heat and electricity produced in those processes. These processes will supply more viable options to utilisation of those wastes. The anaerobic digestion of WDGS to produce electricity scenario was found to have the biggest profit among the four scenarios which can bring the annual income of 14.1 million Australian dollar to the ethanol plant. An environmental analysis of the CO₂ emissions was also conducted. Using the Australian state emission factor, the amount of CO₂ offset through both combustion and anaerobic digestion can be seen. The anaerobic digestion of WDGS to supply heat to the plant was proved having the largest CO₂ abatement with the value of 0.58 kg-CO₂e/L-EtOH.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12155-022-10501-6.

Toxicity of insecticidal proteins from entomopathogenic bacteria to Galleria mellonella larvae

Entomopathogenic bacteria have great potential in insect control in the agricultural production because they produce a large variety of protein toxins that can kill their hosts by damaging the insect midgut. However, the mechanisms on how these toxins or specific insecticidal proteins act on insects are very diverse and elusive. Here we select Galleria mellonella larvae as the host to explore the effects of insecticidal proteins on the activities of three protective enzymes (SOD, POD, and CAT) and on the morphology of the midgut tissues. As a result, the activities of the three enzymes consistently increased and then decreased when the host was injected with the insecticidal proteins from the entomopathogenic bacterium Enterobacter cloacae. Moreover, the microscopy analysis showed that tissues, cells, and organelles of the host midgut are all diseased after uptake of the insecticidal proteins. Remarkably, the protein toxins contributed to the deformation of the midgut, blackening of the midgut surface, dissolution of cell membrane, shrinkage of cell nucleus, and chromatin condensation. Our findings will advance the explanation of G. mellonella pathogenesis caused by the insecticidal proteins.

Synthetic Organic Compounds From Paper Industry Wastes: Integrated Biotechnological Interventions

Synthetic organic compounds (SOCs) are reported as xenobiotics compounds contaminating the environment from various sources including waste from the pulp and paper industries: Since the demand and production of paper is growing increasingly, the release of paper and pulp industrial waste consisting of SOCs is also increasing the SOCs' pollution in natural reservoirs to create environmental pollution. In pulp and paper industries, the SOCs viz. phenol compounds, furans, dioxins, benzene compounds etc. are produced during bleaching phase of pulp treatment and they are principal components of industrial discharge. This review gives an overview of various biotechnological interventions for paper mill waste effluent management and elimination strategies. Further, the review also gives the insight overview of various ways to restrict SOCs release in natural reservoirs, its limitations and integrated approaches for SOCs bioremediation using engineered microbial approaches. Furthermore, it gives a brief overview of the sustainable remediation of SOCs via genetically modified biological agents, including bioengineering system innovation at industry level before waste discharge.

Assessment of Greenhouse Gases and Pollutant Emissions in the Road Freight Transport Sector: A Case Study for São Paulo State, Brazil

This study analyzes the road freight sector of São Paulo state to identify the best options to reduce greenhouse gases emissions and local pollutants, such as particulate matter, nitrogen oxides, carbon monoxide, and hydrocarbons. Additionally, the investment cost of each vehicle is also analyzed. Results show that electric options, including hybrid, battery, and hydrogen fuel-cell electric vehicles represent the best options to reduce pollutants and greenhouse gases emissions concomitantly, but considerable barriers for their deployment are still in place. With little long-term planning on the state level, electrification of the transport system, in combination with increased renewable electricity generation, would require considerable financial support to achieve the desired emissions reductions without increasing energy insecurity.