Study on improving the stability of adsorption-encapsulation immobilized Laccase@ZIF-67

Enhancing industrial biocatalyst performance and cost-efficiency through adsorption-based enzyme immobilization: A review

Various enzymes such as lipases, proteases and laccases have been extracted for use in various industrial applications. However, most natural enzymes possess characteristics that make them unsuitable for the harsh conditions often associated with industrial processes. To overcome these limitations, various methods and techniques have been developed to enhance the suitability of enzymes as industrial biocatalysts, making them a viable alternative to chemical catalysts. One of the most effective approaches is enzyme immobilization, which improves enzyme properties such as thermal stability, organic solvent stability, enhanced efficiency, catalytic performance, prolonged storage, operational stability, and reusability. These improved characteristics lower manufacturing costs and provide more effective catalysts, making them essential for industrial applications. Enzyme immobilization typically involves attaching the enzyme to a solid support, and the microenvironment including the pH of the binding solution and the nature of the support often influences the immobilization rate. Immobilization techniques also play a crucial role in the success of the process. The adsorption method is being widely used due to its simplicity and minimal impact on enzyme structure. Through hydrogen bonds, ionic interactions, Van der Waals forces, and hydrophobic interactions, this method preserves the enzyme's active site, making it the preferred choice in industrial settings.

CoCu@NC Nanozyme with pH-Switchable and Dual Enzymatic Activity: Highly Sensitive Colorimetric Sensing of Doxorubicin and Naked-Eye Detection of H2O2-Induced DNA Damage

The development of nanomaterials with multienzyme activity for advanced sensing and biosensing assays has attracted attention. In this study, a Cu-Co bimetallic nitrogen-doped carbon catalyst (CoCu@NC) was synthesized. The prepared nanomaterials exhibit catalase- and oxidase-like mimicking activities by adjusting the pH. The catalase-like activity of the CoCu@NC was investigated by quenching of terephthalic acid (TA) fluorescence at pH 11 in the presence of H2O2, while its oxidase behavior was confirmed by oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) as chromogenic substrate in the presence of O2 at pH 3. Furthermore, CoCu@NC's oxidase-like activity was used successfully to detect hydroquinone (HQ) at a concentration range of 1-900 nM with a detection limit of 0.22 nM and the anticancer drug doxorubicin (DOX) with a wide linear response ranging from 5 fM to 200 pM and an exceptionally low detection limit of 1.66 fM by reduction of oxTMB to TMB. DOX interacts in situ with single-stranded (ssDNA) and double-stranded DNA (dsDNA), reducing the quinone ring in its structure to hydroquinone (HQ) and oxidizing guanine bases to 8-oxoguanine. Based on this phenomenon, we designed a label-free colorimetric sensor for measuring DNA damage (ranging from 1 pM to 1 μM), in which this sensor operates by the disappearance of the blue oxTMB solution and the presence of the DNA/DOX. Furthermore, this designed sensor is sensitive to the number of guanine bases in ssDNA and dsDNA. As the number of guanine bases (1-12) in DNA sequences increases, a greater color change is observed. Finally, in the presence of H2O2-induced DNA damage, no intercalation occurred between DOX and the DNA-damaged sequences, with the color change observable with the naked eye. Therefore, this visualization assay demonstrates a low-cost, simple, rapid, sensitive, and effective method for detecting DOX drug and damaged DNA. Additionally, CoCu@NC magnetic nanostructures could be easily recollected and reused by applying a magnetic field.

Exploring the multifaceted roles of metal-organic frameworks in ecosystem regulation

Achieving microecological balance is a complex environmental challenge. This is because the equilibrium of microecological systems necessitates both the eradication of harmful microorganisms and preservation of the beneficial ones. Conventional materials predominantly target the elimination of pathogenic microorganisms and often neglect the protection of advantageous microbial species. Metal-organic frameworks (MOFs) with excellent physicochemical properties (such as crystalline particles of various dimensions with highly porous network topology, variable local networking structures, diverse compositions with functional groups, high specific surface areas and pore volumes for surface and porous guest molecular adsorption/adhesion/affinity/binding and separation) have been extensively studied as a type of bactericidal material. However, only recently, studies on using MOFs to protect microorganisms have been reported. This review provides a comprehensive analysis of the mechanisms and applications of various MOFs (such as ZIF-8, ZIF-90, HKUST-1, MOF-5, and MIL-101) in both microbial eradication and protection. Insights into previous studies on MOF development, the material-bacteria interaction mechanisms, and potential clinical and environmental applications are also elucidated. MOFs with different framework structures/topologies (zeolite, sodalite, scaffolding, diamond, one-dimensional, and spherical/cylindrical cavities/pore networks), particle dimensions, polyhedral, cubic, rod and open/uncoordinated metal centers or fully coordinated metal centers, and ligand functional groups are discussed to understand the varying degrees of activation and interaction of microorganisms. This review holds potential in guiding future research on the design, synthesis, utilization, and integration of MOFs for the targeted eradication and protection of microorganisms and generating novel MOFs with selective antimicrobial and protective properties. Moreover, this review delivers a timely update and outlines future prospects for MOFs and their interaction with microorganisms, emphasizing their potential as a promising candidate among the next generation of smart materials in the field of ecosystem regulation.

Growth of the metal-organic framework ZIF-67 on cellulosic substrates for triboelectric nanogenerators

Metal-organic frameworks (MOFs) are porous crystalline materials with a metal ion coordinated to a ligand molecule. Recently, MOFs are being explored extensively for energy harvesting via triboelectrification. However, the majority of MOFs are brittle and hard to grow, thus leading to poor device stability and flexibility. Herein, the growth of ZIF-67 MOF is achieved on a cellulosic filter paper (CFP) and cotton fabric (CF) separately to use as the active layer in a TENG. The grown ZIF-67 MOFs were used for the fabrication of CFP-TENG and CF-TENG in vertical contact separation mode. The CF-TENG device exhibited a high durability with no significant change in the electrical output for a period of 14 000 s. Additionally, the device generated a maximum electrical output of 60 V and 3 μA with an output power density of 5 mW m-2 at a load resistance of 800 MΩ. The robustness of the MOF grown on cotton fabric was demonstrated by fabricating a contact separation and rotating TENG device. The rotating TENG device produced an output voltage of ∼100 V and current of 3.5 μA, thus confirming the strong adherence of MOFs on the fabric. The CF-TENG was demonstrated for powering electronics via flexible circuits and for biomechanical energy harvesting by utilising finger tapping, hand tapping, jogging and running movements.

Graphene oxide dispersed mesoporous ZIF-8-encapsulated laccase for removal of toluidine blue with multiple enhanced stability

The extensive use and discharge of toluidine blue have caused serious problems to the water environment. As a green biocatalyst, laccase has the ability to decolorize the dyes, but it is limited by poor reusability and low stability. Metal-organic frameworks (MOFs) are a good platform for enzyme immobilization. However, due to the weak dispersion of MOFs, the enzyme activity is inevitably inhibited. Herein, we proposed to use graphene oxide (GO) as the dispersion medium of mesoporous ZIF-8 to construct MZIF-8/GO bi-carrier for laccase (FL) immobilization. On account of the narrower bandgap energy of FL@MZIF-8/GO (4.07 eV) than that of FL@MZIF-8 (4.69 eV), electron transport was enhanced which later increased the catalytic activity of the immobilized enzyme. Meanwhile, the improved hydrophilicity characterized by contact angle and full infiltration time further promoted the efficiency of the enzymatic reaction. Benefiting from such regulatory effects of GO, the composite showed excellent storage stability and reusability, as well as multifaceted enhancements including pH, thermal, and solvent adaptation. On the basis of the characterized synergistic effect of adsorption and degradation, FL@MZIF-8/GO was successfully applied to the degradation of toluidine blue (TB) with a removal rate of 94.8%. Even in actual treated wastewater, the highest removal rate still reached more than 80%. Based on the inner mechanism analysis and the universality study, this material is expected to be widely used in the degradation of pollutants in real water under complex environmental conditions.

Tailor-made novel electrospun polycaprolactone/polyethyleneimine fiber membranes for laccase immobilization: An all-in-one material to biodegrade textile dyes and phenolic compounds

In spite of many works on the biodegradation of textile dyes and phenolic compounds, we propose a new, inexpensive, environmentally friendly, and sustainable material based on electrospun fiber and immobilized laccase. The polycaprolactone (PCL)/polyethyleneimine (PEI) electrospun fibers were optimized and prepared by electrospinning technique according to the operational parameters like PCL concentration (12 wt%), PEI concentration (10 wt%), voltage (16 kV), needle tip-collector distance (20 cm), and injection speed (0.7 mL/h). Next, characterization studies were performed to investigate the morphology and structure of the electrospun fibers without and with laccase. The crude laccase was obtained by cultivating the white rot fungus T. trogii (TT), and T. versicolor (TV). The resulting electrospun fibers showed a smooth surface with a mean diameter of around 560 nm, and larger diameters were observed after laccase immobilization. According to the results, immobilization increased the stability properties of laccase such as storage, and operational. For instance, the residual activity of the PCL/PEI/TTL and PCL/PEI/TVL after 10 repeated cycles, was 33.2 ± 0.2% and 26.0 ± 0.9%, respectively. After 3 weeks of storage, they retained around 30% of their original activity. Moreover, the PCL/PEI/TTL and PCL/PEI/TVL were found to possess high decolorization yield to remove Orange II and Malachite Green textile dyes from solutions imitating polluted waters. Among them, the PCL/PEI/TTL exhibited the highest decolorization efficiencies of Orange II and Malachite Green after 8 continuous uses at pH 5 and a temperature of 50 °C, reaching over 86%, and 46%, respectively. Moreover, PCL/PEI/TTL and PCL/PEI/TVL effectively degraded the 2,6-dichlorophenol phenolic compound at an optimal pH and temperature range and exhibited maximum removal efficiency of 52.6 ± 0.1% and 64.5 ± 7.6%, respectively. Our approach combines the advantageous properties of electrospun fiber material and immobilization strategy for the efficient use of industrial scale important enzymes such as laccase in various enzymatic applications.

Corn Cob as a Green Support for Laccase Immobilization-Application on Decolorization of Remazol Brilliant Blue R

The high demand for food and energy imposed by the increased life expectancy of the population has driven agricultural activity, which is reflected in the larger quantities of agro-industrial waste generated, and requires new forms of use. Brazil has the greatest biodiversity in the world, where corn is one of the main agricultural genres, and where over 40% of the waste generated is from cobs without an efficient destination. With the aim of the valorization of these residues, we proposed to study the immobilization of laccase from Aspergillus spp. (L_Asp) in residual corn cob and its application in the degradation of Remazol Brilliant Blue R (RBBR) dye. The highest yields in immobilized protein (75%) and residual activity (40%) were obtained at pH 7.0 and an enzyme concentration of 0.1 g.mL⁻¹, whose expressed enzyme activity was 1854 U.kg⁻¹. At a temperature of 60 °C, more than 90% of the initial activity present in the immobilized biocatalyst was maintained. The immobilized enzyme showed higher efficiency in the degradation (64%) of RBBR dye in 48 h, with improvement in the process in 72 h (75%). The new biocatalyst showed operational efficiency during three cycles, and a higher degradation rate than the free enzyme, making it a competitive biocatalyst and amenable to industrial applications.

Characterization of D-Allulose-3-Epimerase From Ruminiclostridium papyrosolvens and Immobilization Within Metal-Organic Frameworks

D-allulose is one sort of C-3 epimer of D-fructose with the low calorie (0.4 kcal/g) and high sweetness (70% of the relative sweetness of sucrose), which can be biosynthesized by D-allulose-3-epimerase (DAE). In this work, we report the characterization of a novel DAE from Ruminiclostridium papyrosolvens (RpDAE) by genome mining approach. The activity of RpDAE reached maximum at pH 7.5 and 60°C, supplemented with 1 mM Co²⁺. Using D-fructose (500 g/L) as the substrate for epimerization reaction, RpDAE produced D-allulose (149.5 g/L). In addition, RpDAE was immobilized within the microporous zeolite imidazolate framework, ZIF67, by in situ encapsulation at room temperature. The synthesized bio-composites were characterized by powder X-ray diffraction and Fourier transform infrared spectroscopy. RpDAE-ZIF67 maintained 56% of residual activity after five reaction cycles. This study provides helpful guidance for further engineering applications and industrial production of D-allulose.

Design of laccase-metal-organic framework hybrid constructs for biocatalytic removal of textile dyes

This study aims to present a simple and effective carrier matrix to immobilize laccase as opposed to complex and tedious immobilization processes and also to use it in the removal of textile dyes. For this purpose, Cobalt (Co) and Copper (Cu) based metal-organic frameworks (MOFs) were prepared and laccase was immobilized on two different MOFs via encapsulation. The characterization outcomes showed that laccase was well immobilized into MOF supports. Optimum pH and temperature were found for Lac/Co-MOF (pH 4.5 at 50 °C) and Lac/Cu-MOF (pH 5.0 at 50 °C). The Km (0.03 mM) and Vmax (97.4 μmol/min) values of Lac/Cu-MOF were lower than those of Lac/Co-MOF (Km = 0.13 mM, Vmax = 230.7 μmol/min). The immobilized laccases showed good reusability as well as improved resistance to temperature denaturation and high storage stability. For instance, the Lac/Co-MOF and Lac/Cu-MOF retained more than 58% activity after 4 weeks of storage at room temperature. Meanwhile, Lac/Co-MOF and Lac/Cu-MOF maintained 56.5% and 55.8% of their initial activity, respectively, after 12 reuse cycles. Moreover, thermal deactivation kinetic studies of immobilized laccases displayed lower k value, higher t_1/2, and enhancement of thermodynamic parameters, which means better thermostability. Finally, the decolorization activities for the Lac/Co-MOF were 78% and 61% at the 5th cycle for Reactive Blue 171 and Reactive Blue 198, respectively. In conclusion, it can be inferred that the MOFs are more sustainable and beneficial support for laccase immobilization and they can be efficient for removing textile dyes from industrial wastes.

Enhancing the Thermostability of Engineered Laccases in Aqueous Betaine-Based Natural Deep Eutectic Solvents

In recent years, natural deep eutectic solvents (NADESs) have gained increasing attention as promising nontoxic solvents for biotechnological applications, due to their compatibility with enzymes and ability to enhance their activity. Betaine-based NADESs at a concentration of 25 wt % in a buffered aqueous solution were used as media to inhibit thermal inactivation of POXA1b laccase and its five variants when incubated at 70 and 90 °C. All the tested laccases showed higher residual activity when incubated in NADES solutions, with a further enhancement achieved also for the most thermostable variant. Furthermore, the residual activity of laccases in the presence of NADESs showed a clear advantage over the use of NADESs' individual components. Molecular docking simulations were performed to understand the role of NADESs in the stabilization of laccases toward thermal inactivation, evaluating the interaction between each enzyme and NADESs' individual components. A correlation within the binding energies between laccases and NADES components and the stabilization of the enzymes was demonstrated. These findings establish the possibility of preincubating enzymes in NADESs as a facile and cost-effective solution to inhibit thermal inactivation of enzymes when exposed to high temperatures. This computer-aided approach can assist the tailoring of NADES composition for every enzyme of interest.

Hydrogenation of furfural over Pd@ZIF-67 derived catalysts: direct hydrogenation and transfer hydrogenation

Pd particles coated with ZIF-67 (Pd@ZIF-67) was prepared from the self-reduction of palladium acetate.

The study of laccase immobilization optimization and stability improvement on CTAB-KOH modified biochar

BACKGROUND

Although laccase has a good catalytic oxidation ability, free laccase shows a poor stability. Enzyme immobilization is a common method to improve enzyme stability and endow the enzyme with reusability. Adsorption is the simplest and common method. Modified biochar has attracted great attention due to its excellent performance.

RESULTS

In this paper, cetyltrimethylammonium bromide (CTAB)-KOH modified biochar (CKMB) was used to immobilize laccase by adsorption method (laccase@CKMB). Based on the results of the single-factor experiments, the optimal loading conditions of laccase@CKMB were studied with the assistance of Design-Expert 12 and response surface methods. The predicted optimal experimental conditions were laccase dosage 1.78 mg/mL, pH 3.1 and 312 K. Under these conditions, the activity recovery of laccase@CKMB was the highest, reaching 61.78%. Then, the CKMB and laccase@CKMB were characterized by TGA, FT-IR, XRD, BET and SEM, and the results showed that laccase could be well immobilized on CKMB, the maximum enzyme loading could reach 57.5 mg/g. Compared to free laccase, the storage and pH stability of laccase@CKMB was improved greatly. The laccase@CKMB retained about 40% of relative activity (4 °C, 30 days) and more than 50% of relative activity at pH 2.0-6.0. In addition, the laccase@CKMB indicated the reusability up to 6 reaction cycles while retaining 45.1% of relative activity. Moreover, the thermal deactivation kinetic studies of laccase@CKMB showed a lower k value (0.00275 min^- 1) and higher t_1/2 values (252.0 min) than the k value (0.00573 min^- 1) and t_1/2 values (121.0 min) of free laccase.

CONCLUSIONS

We explored scientific and reasonable immobilization conditions of laccase@CKMB, and the laccase@CKMB possessed relatively better stabilities, which gave the immobilization of laccase on this cheap and easily available carrier material the possibility of industrial applications.

Succinic anhydride-based chemical modification making laccase@Cu3(PO4)2 hybrid nanoflowers robust in removing bisphenol A in wastewater

To prepare a robust biocatalyst and enhance the removal of bisphenol A in wastewater, succinic anhydride was reacted with laccase to obtain succinic anhydride-modified laccase (SA-laccase) and then co-crystallized with Cu₃(PO₄)₂ to form SA-laccase@Cu₃(PO₄)₂ hybrid nanoflowers (hNFs). The activity of SA-laccase@Cu₃(PO₄)₂ reached 5.27 U/mg, 1.86-, 2.88- and 2.15-fold those of bare laccase@Cu₃(PO₄)₂, laccase@Ca₃(PO₄)₂ and laccase@epoxy resin, respectively. Compared with free laccase, the obtained hNFs present enhanced activity and tolerance to pH and high temperature in the removal of BPA. Under the optimum conditions of pH 6.0 and 35 °C, BPA removal reached 93.2% using SA-laccase@Cu₃(PO₄)₂ hNFs, which was 1.21-fold of that using free laccase. In addition, the obtained SA-laccase@Cu₃(PO₄)₂ hNFs retained nearly 90% of their initial catalytic activity for BPA removal after 8 consecutive batch cycles. This efficient method for preparing immobilized laccase can also be further developed and improved to acquire green biocatalysts for removing persistent organic pollutants in wastewater.

Solid-Phase Extraction of Aristolochic Acid I from Natural Plant Using Dual Ionic Liquid-Immobilized ZIF-67 as Sorbent

(1) Background: ZIF-67 is one of the most intriguing metal–organic frameworks already applied in liquid adsorption. To increase its adsorption performance, dual ionic liquids were immobilized on ZIF-67 in this research; (2) Methods: The obtained sorbent was used to adsorb aristolochic acid I (AAI) in standard solutions. Then, the sorbent was applied in solid-phase extraction to remove AAI from Fibraurea Recisa Pierre extracted solution. (3) Results: By analyzing the adsorption models, the highest adsorption capacity of immobilized sorbent (50.9 mg/g) was obtained at 25 °C within 120 min. In the SPE process, 0.02 mg of AAI was removed per gram of herbal plant, the adequate recoveries were in the range of 96.2–100.0%, and RSDs were 3.5–4.0%; (4) Conclusions: The provided experimental data revealed that ZIF-67@EIM-MIM was an excellent potential sorbent to adsorb and remove AAI from herbal plant extract, and the successful separation indicated that this sorbent could be an ideal material for the pretreatment of herbal plants containing AAI.