Wind tunnel tests of inter-flat pollutant transmission characteristics in a rectangular multi-storey residential building, part B: Effect of source location

Effects of Radiant Floor Heating Integrated with Natural Ventilation on Flow and Dispersion in a Newly Decorated Residence

To date, few studies have been conducted on the characteristics of flow and dispersion caused by indoor radiant floor heating integrated with natural ventilation. In this study, we employed reduced-scale numerical models validated by wind-tunnel experiments to investigate the influence of radiant floor heating integrated with natural ventilation on airflow, heat transfer, and pollutant dispersion within an isolated building. The Richardson number (Ri) was specified to characterize the interaction between the inflow inertia force and the buoyancy force caused by radiant floor heating. Several Ri cases from 0 to 26.65, coupled with cross- or single-sided ventilation, were considered. Model validation showed that the numerical model coupled with the RNG k-ε model was able to better predict the indoor buoyant flow and pollutant dispersion. The results showed that the similarity criterion of Ri equality should be first satisfied in order to study indoor mixed convection using the reduced-scale model, followed by Re-independence. For cross-ventilation, when Ri < 5.31, the incoming flow inertia force mainly dominates the indoor flow structure so that the ACH, indoor temperature, and pollutant distributions remain almost constant. When Ri > 5.31, the thermal buoyancy force becomes increasingly important, causing significant changes in indoor flow structures. However, for single-sided ventilation, when Ri > 5.31 and continues to increase, the buoyancy force mainly dominates the indoor flow structure, causing a significant increase in ACH, thus reducing the indoor average temperature and pollutant accumulation.

Airborne transmission of biological agents within the indoor built environment: a multidisciplinary review

The nature and airborne dispersion of the underestimated biological agents, monitoring, analysis and transmission among the human occupants into building environment is a major challenge of today. Those agents play a crucial role in ensuring comfortable, healthy and risk-free conditions into indoor working and leaving spaces. It is known that ventilation systems influence strongly the transmission of indoor air pollutants, with scarce information although to have been reported for biological agents until 2019. The biological agents' source release and the trajectory of airborne transmission are both important in terms of optimising the design of the heating, ventilation and air conditioning systems of the future. In addition, modelling via computational fluid dynamics (CFD) will become a more valuable tool in foreseeing risks and tackle hazards when pollutants and biological agents released into closed spaces. Promising results on the prediction of their dispersion routes and concentration levels, as well as the selection of the appropriate ventilation strategy, provide crucial information on risk minimisation of the airborne transmission among humans. Under this context, the present multidisciplinary review considers four interrelated aspects of the dispersion of biological agents in closed spaces, (a) the nature and airborne transmission route of the examined agents, (b) the biological origin and health effects of the major microbial pathogens on the human respiratory system, (c) the role of heating, ventilation and air-conditioning systems in the airborne transmission and (d) the associated computer modelling approaches. This adopted methodology allows the discussion of the existing findings, on-going research, identification of the main research gaps and future directions from a multidisciplinary point of view which will be helpful for substantial innovations in the field.

Influencing Factors on Airflow and Pollutant Dispersion around Buildings under the Combined Effect of Wind and Buoyancy-A Review

With the rapid growth of populations worldwide, air quality has become an increasingly important issue related to the health and safety of city inhabitants. There are quite a few factors that contribute to urban air pollution; the majority of studies examining the issue are concerned with environmental conditions, building geometries, source characteristics and other factors and have used a variety of approaches, from theoretical modelling to experimental measurements and numerical simulations. Among the environmental conditions, solar-radiation-induced buoyancy plays an important role in realistic conditions. The thermal conditions of the ground and building façades directly affect the wind field and pollutant dispersion patterns in the microclimate. The coupling effect of wind and buoyancy on the urban environment are currently hot and attractive research topics. Extensive studies have been devoted to this field, some focused on the street canyon scale, and have found that thermal effects do not significantly affect the main airflow structure in the interior of the street canyon but strongly affect the wind velocity and pollutant concentration at the pedestrian level. Others revealed that the pollutant dispersion routes can be obviously different under various Richardson numbers at the scale of the isolated building. The purpose of this review is therefore to systematically articulate the approaches and research outcomes under the combined effect of wind and buoyancy from the street canyon scale to an isolated building, which should provide some insights into future modelling directions in environmental studies.

Ventilation strategies and design impacts on indoor airborne transmission: A review

The COVID-19 outbreak has brought the indoor airborne transmission issue to the forefront. Although ventilation systems provide clean air and dilute indoor contaminated air, there is strong evidence that airborne transmission is the main route for contamination spread. This review paper aims to critically investigate ventilation impacts on particle spread and identify efficient ventilation strategies in controlling aerosol distribution in clinical and non-clinical environments. This article also examines influential ventilation design features (i.e., exhaust location) affecting ventilation performance in preventing aerosols spread. This paper shortlisted published documents for a review based on identification (keywords), pre-processing, screening, and eligibility of these articles. The literature review emphasizes the importance of ventilation systems' design and demonstrates all strategies (i.e., mechanical ventilation) could efficiently remove particles if appropriately designed. The study highlights the need for occupant-based ventilation systems, such as personalized ventilation instead of central systems, to reduce cross-infections. The literature underlines critical impacts of design features like ventilation rates and the number and location of exhausts and suggests designing systems considering airborne transmission. This review underpins that a higher ventilation rate should not be regarded as a sole indicator for designing ventilation systems because it cannot guarantee reducing risks. Using filtration and decontamination devices based on building functionalities and particle sizes can also increase ventilation performance. This paper suggests future research on optimizing ventilation systems, particularly in high infection risk spaces such as multi-storey hotel quarantine facilities. This review contributes to adjusting ventilation facilities to control indoor aerosol transmission.

Probable cross-corridor transmission of SARS-CoV-2 due to cross airflows and its control

A COVID-19 outbreak occurred in May 2020 in a public housing building in Hong Kong - Luk Chuen House, located in Lek Yuen Estate. The horizontal cluster linked to the index case' flat (flat 812) remains to be explained. Computational fluid dynamics simulations were conducted to obtain the wind-pressure coefficients of each external opening on the eighth floor of the building. The data were then used in a multi-zone airflow model to estimate the airflow rate and aerosol concentration in the flats and corridors on that floor. Apart from flat 812 and corridors, the virus-laden aerosol concentrations in flats 811, 813, 815, 817 and 819 (opposite to flat 812, across the corridor) were the highest on the eighth floor. When the doors of flats 813 and 817 were opened by 20%, the hourly-averaged aerosol concentrations in these two flats were at least four times as high as those in flats 811, 815 and 819 during the index case's home hours or the suspected exposure period of secondary cases. Thus, the flats across the corridor that were immediately downstream from flat 812 were at the highest exposure risk under a prevailing easterly wind, especially when their doors or windows that connected to the corridor were open. Given that the floorplan and dimension of Luk Chuen House are similar to those of many hotels, our findings provide a probable explanation for COVID-19 outbreaks in quarantine hotels. Positive pressure and sufficient ventilation in the corridor would help to minimise such cross-corridor infections.

Gaseous pollutant transport from an underground parking garage in a Mediterranean multi-story building-Effect of temporal resolution under varying weather conditions

Indoor air dynamics and quality in high density residential buildings can be complex as it is affected by both building parameters, pollution sources, and outdoor meteorological conditions. The present study used CONTAM simulations to investigate the intra-building transport and concentration of an inert pollutant continuously emitted from an underground garage of a 15-floor building under moderate Mediterranean weather. The effects of outdoor meteorological conditions (air temperature, wind speed and direction) on indoor distribution of the emitted pollutant was tested under constant conditions. The importance of using actual transient meteorological data and the impact of their temporal resolution on calculated concentrations and exposure levels were also investigated. Vertical profiles of air exchange rate (AER) and CO concentration were shown to be sensitive to indoor-outdoor temperature difference, which controls the extent of the stack effect and its importance relative to wind effect. Even under constant conditions, transient mode simulations revealed that the time needed for pollutant distribution to reach steady state can be quite long (>24h in some cases). The temporal resolution (1h vs. 8h) of the meteorological data input was also found to impact calculated exposure levels, in an extent that varied with time, meteorological conditions and apartment position.

Effects of Neighboring Units on the Estimation of Particle Penetration Factor in a Modeled Indoor Environment

Ingress of air from neighboring apartments is an important source of fine particulate matter (PM2.5) in residential multi-story buildings. It affects the measurement and estimation of particle deposition rate and penetration factor. A blower-door method to measure the particle deposition rate and penetration factor has previously been found to be more precise than the traditional decay-rebound method as it reduces variability of PM2.5 ingress from outside. CONTAM is a multi-zone indoor air quality and ventilation analysis computer program to aid the prediction of indoor air quality. It was used in this study to model the indoor PM2.5 concentrations in an apartment under varying PM2.5 emission from neighboring apartments and window opening and closing regimes. The variation of indoor PM2.5 concentration was also modeled for different days to account for typical outdoor variations. The calibrated CONTAM model aimed to simulate environments found during measurement of particle penetration factor, thus identifying the source of error in the estimates. Results show that during simulated measurement of particle penetration factors using the blower-door method for three-hour periods under a constant 4 Pa pressure difference, the indoor PM2.5 concentration increases significantly due to PM2.5 generated from adjacent apartments, having the potential to cause an error of more than 20% in the estimated value of particle penetration factor. The error tends to be lower if the measuring time is extended. Simulated measurement of the decay-rebound method showed that more PM2.5 can penetrate inside if the PM2.5 was generated from apartments below under naturally variable weather conditions. A multiple blower-door fan can be used to reduce the effects of neighboring emission and increase the precision of the penetration estimates.

Numerical investigation of gaseous pollutant cross-transmission for single-sided natural ventilation driven by buoyancy and wind

Single-sided natural ventilation was numerically investigated to determine the impact of buoyancy and wind on the cross-transmission of pollution by considering six window types commonly found in multistory buildings. The goal of this study was to predict the gaseous pollutant transmission using computational fluid dynamics based on the Reynolds-averaged Navier-Stokes equations and baseline k-ω turbulence equations. The results indicated that ventilation rates generally increased with increasing wind speeds if the effects of buoyancy and wind were not suppressed; however, the re-entry ratio representing the proportion of expelled air re-entering other floors and the corresponding risk of infection decreased. If the source of the virus was on a central floor, the risk of infection was the highest on the floors closest to the source. Different window types were also considered for determining their effectiveness in controlling cross-transmission and infection risk, depending on the source location and driving force (e.g., buoyancy and wind).

Numerical investigation of gaseous pollutant cross-transmission for single-sided natural ventilation driven by buoyancy and wind

Single-sided natural ventilation was numerically investigated to determine the impact of buoyancy and wind on the cross-transmission of pollution by considering six window types commonly found in multistory buildings. The goal of this study was to predict the gaseous pollutant transmission using computational fluid dynamics based on the Reynolds-averaged Navier-Stokes equations and baseline k-ω turbulence equations. The results indicated that ventilation rates generally increased with increasing wind speeds if the effects of buoyancy and wind were not suppressed; however, the re-entry ratio representing the proportion of expelled air re-entering other floors and the corresponding risk of infection decreased. If the source of the virus was on a central floor, the risk of infection was the highest on the floors closest to the source. Different window types were also considered for determining their effectiveness in controlling cross-transmission and infection risk, depending on the source location and driving force (e.g., buoyancy and wind).

Investigation of interunit dispersion in 2D street canyons: A scaled outdoor experiment

Interunit dispersion problems have been studied previously mainly through on-site measurements, wind tunnel tests, and CFD simulations. In this study, a scaled outdoor experiment was conducted to examine the interunit dispersion characteristics in consecutive two-dimensional street canyons. Tracer gas ( C O 2 ) was continuously released to simulate the pollutant dispersion routes between the rooms in street canyons. The wind velocity, wind direction, air temperature, and tracer gas concentrations were monitored simultaneously. Two important parameters, the air exchange rate and reentry ratio, were analyzed to reveal the ventilation performance and interunit dispersion of the rooms in the street canyons. Based on the real-time weather conditions, it was found that the ventilation performance of the source room varied according to the room location. The air exchange rate distribution of the leeward-side room was more stable than that of the windward side. The tracer gas was mainly transported in the vortex direction inside the street canyon, and the highest reentry ratio was observed at the room nearest to the source room along the transportation route. In addition, under real weather conditions, the rooms in the street canyon have a high probability of experiencing a high reentry ratio based on the maximum reentry ratio of each room. This study provides authentic airflow and pollutant dispersion information in the street canyons in an urban environment. The dataset of this experiment can be used to validate further numerical simulations.

Investigation of interunit dispersion in 2D street canyons: A scaled outdoor experiment

Interunit dispersion problems have been studied previously mainly through on-site measurements, wind tunnel tests, and CFD simulations. In this study, a scaled outdoor experiment was conducted to examine the interunit dispersion characteristics in consecutive two-dimensional street canyons. Tracer gas ( C O 2 ) was continuously released to simulate the pollutant dispersion routes between the rooms in street canyons. The wind velocity, wind direction, air temperature, and tracer gas concentrations were monitored simultaneously. Two important parameters, the air exchange rate and reentry ratio, were analyzed to reveal the ventilation performance and interunit dispersion of the rooms in the street canyons. Based on the real-time weather conditions, it was found that the ventilation performance of the source room varied according to the room location. The air exchange rate distribution of the leeward-side room was more stable than that of the windward side. The tracer gas was mainly transported in the vortex direction inside the street canyon, and the highest reentry ratio was observed at the room nearest to the source room along the transportation route. In addition, under real weather conditions, the rooms in the street canyon have a high probability of experiencing a high reentry ratio based on the maximum reentry ratio of each room. This study provides authentic airflow and pollutant dispersion information in the street canyons in an urban environment. The dataset of this experiment can be used to validate further numerical simulations.

Dispersion Characteristics of Hazardous Gas and Exposure Risk Assessment in a Multiroom Building Environment

The leakage of hazardous chemicals during storage and transport processes is a kind of commonly occurring accident that can pose a serious threat to people's lives and property. This paper aims to investigate the airflow and dispersion characteristics of hazardous gas around a multiroom building, and evaluate the corresponding exposure risks. The effects on indoor air quality (IAQ) when polluted air enters a room under different indoor and external conditions were examined by using a computational fluid dynamics technique. First, the numerical model established herein was verified by the available wind-tunnel experimental data, and acceptable agreement was found between the predicted and measured velocities. Subsequently, the effects of different natural ventilation paths, wall porosities and outdoor pollutant source characteristics on the airflow and contaminant distribution were evaluated. The study not only reveals the airflow pattern and concentration distribution in indoor spaces under different natural ventilation conditions but also quantitatively analyzes the relationship between the probability of death and the corresponding source strength under the circumstance of pollutant leakage near a building. The results can be useful for the prevention and control of hazardous chemical gas leakages and provide some guidance on evacuation after an accidental or routine leakage.

CFD simulation of urban microclimate: Validation using high-resolution field measurements

Heat stress in urban areas can have detrimental effects on human health, comfort and productivity. In order to mitigate heat stress, Computational Fluid Dynamics (CFD) simulations of urban microclimate are increasingly used. The validation of these simulations however requires high-quality experimental data to be compared with the simulation results. Due to lack of available high-resolution high-quality experimental data, CFD validation of urban microclimate for real urban areas is normally performed based on either a limited number of parameters measured at a limited number of points in space, or on experiments for idealized generic configurations. In this study, CFD simulations of urban microclimate are performed for a dense highly heterogeneous district in Nicosia, Cyprus and validated using a high-resolution dataset of on-site measurements of air temperature, wind speed and surface temperature conducted for the same district area. The CFD simulations are performed based on the 3D Unsteady Reynolds-Averaged Navier-Stokes (URANS) equations and the simulated period covers four consecutive days in July 2010. It is shown that the CFD simulations can predict air temperatures with an average absolute difference of 1.35 °C, wind speed with an average absolute difference of 0.57 m/s and surface temperatures with an average absolute difference of 2.31 °C. Based on the comparative results, conclusions are made regarding the performance of URANS for the selected application and possible reasons for deviations between measured and simulated results are discussed.

CFD investigation on the effects of wind and thermal wall-flow on pollutant transmission in a high-rise building

The solar radiation can heat the building outer surface, and then cause the upward natural convection flows adjacent to the wall. This phenomenon is especially obvious on a windless sunny day. The near wall thermal plume can drive gaseous pollutants released from lower floors to upper floors. Combined with the effect of ambient approaching wind, the transmission routes will be very complicated. The paper aims to investigate the airflow patterns and pollutant transmission within a building under the effects of wind and thermal forces. A hypothetical twenty-storey slab-shape high-rise building in Shanghai with single-sided natural ventilation is set as the research object in the present study. The intensity of solar radiation on a typical day during transition season is theoretically analysed. The temperature difference between the heated building envelope and the ambient air is calculated by a simplified heat balance model. Finally, the tracer gas method is employed in the numerical simulation to analyse the influence of the wind and wall thermal plume flow on the inter-flat pollutant transmission characteristics. The results show that, the temperature difference between sunward and shady side wall is about 10 K at noon on the designate day. When the source is set as a point with steady intensity and the buoyancy is stronger than or approximately equivalent to the wind, the reentry ratio of the flat immediately above the source can be around 25%.