Exploring extraction/dissolution procedures for analysis of starch chain-length distributions

Effects of Wx, SSIIa and FLO2 alleles and their interactions on the formation of multi-scale structures of rice starch

The multi-scale structures of rice starches from 16 recombinant inbred lines and their parents with different combinations of Wx, SSIIa and FLO2 alleles were investigated. Results indicated that the starch multi-scale structures were significantly affected by genotype, environment and genotype × environment interaction. Wx, SSIIa and FLO2 alleles and their interactions significantly affected the starch fine structure. Starches with Wxa allele had higher amylose content (AC) in different amylose chain regions (hAm,i∼iii), degree of polymerization (DP) of amylose peak (XAm), Bragg long period distance (dac), but lower relative crystallinity (RC) compared with Wxb. The starches with SSIIaGC allele had higher XAm, more amylopectin B1 chains (fb1) and RC, but less A chains (fa) and dac than those of SSIIaTT. The floury2 (flo2) mutant starch displayed increased ratio of the peak heights of amylopectin (hAP2/hAP1), fb2 and dac, but decreased RC compared to the wildtype. The Wx × SSIIa interaction had a significant impact on AC, XAP1, βAm,iii, average chain length of amylopectin molecules (X¯) and RC. The interaction effects of FLO2 × Wx were significant for AC, hAm/hAp1, hAm,ii, βAm,iii, hAm,iii, RC, D and dac. Significant FLO2 × SSIIa interaction was detected for XAM, hAP2/hAP1, βAm,ii, fb1, fb3 and RC. FLO2 × Wx×SSIIa effect was significant for XAP1, hAP2/hAP1, βAm,ii, fa, fb3 and X¯. This study provides insights into the individual and interactive effects of the Wx, SSIIa and FLO2 alleles, as well as environmental factors, on the starch fine structure. These results may promote high-quality rice breeding through structural modifications of starch.

Effects of amylose and amylopectin molecular structures on the emulsification performance of starch nanoparticles

Starch nanoparticles have increasing applications as emulsion stabilizers in functional foods and drug delivery. The effects of amylose and amylopectin molecular structures on the emulsification performance of starch nanoparticles obtained from anti-solvent precipitation are explored here. From size-exclusion chromatography results, ten different starch nanoparticles with distinct molecular structures possessed a molecular size ranging from 63 nm to 111 nm. Rice-starch nanoparticles showed near-neutral wettability (contact angle 90.25°) with 100 % emulsifying stability index (ESI). Correlation analysis indicated that the maximum size of the amylopectin component was positively associated with ESI, while the amount of amylopectin long chains and the lengths of amylose short chains negatively correlated with ESI. Mechanistic reasons for these observations are put forward. These findings can help design new emulsifiers using starch nanoparticles, and development of "clean-label" (i.e. having relatively few ingredients, "natural" ingredients, and few synthetic additives) food emulsions.

Mechanistic investigation of impact of malic acid, ultrasound and dual treatment on starch digestibility of cooked whole rice grains

Physical, chemical, and dual modifications can all significantly affect the digestibility of isolated rice granules, while their effects on the starch digestibility of whole cooked rice grains remain elusive. Therefore, the impact of malic acid, ultrasound, and ultrasound + malic acid dual treatment on the starch digestibility of cooked rice grains with different starch molecular structures was investigated in this study. Ultrasound mainly caused cavitation on the surface of rice grains, promoting the leaching of materials (> 11 %) and amylose during cooking. This led to a faster retrogradation rate, smaller pores, and a lower maximum starch digestion extent. In contrast, malic acid caused a faster digestion rate due to the significant degradation of starch molecules, although its moderate esterification smoothed the cooked rice grain surface and slightly reduced the maximum starch digestion extent. Compared to malic acid treatment, the dual treatment showed a much higher degree of esterification, which may thus contribute to its significantly lower maximum starch digestion extent (up to 21 %). Collectively, these findings suggest that both ultrasound and dual treatment can be effective strategies for producing cooked rice grains with slower starch digestibility, with implications for improving the public health.

Effects of ratios of A- and B-type wheat starch on liangpi (a starch gel food) quality and its potential mechanism

The fractionation and reconstitution method was employed to investigate the impact of different proportions of A-type (AS) and B-type (BS) wheat starch on the quality of liangpi and its potential mechanism, with traditional gluten-removed liangpi (RGL) as a control. The results demonstrated that a higher AS/BS ratio led to an increase in hardness, resilience, and chewiness. Moreover, the sensory scores for BS-dominated liangpi were significantly lower than those for AS-dominated liangpi, and liangpi with 60 % AS had the highest sensory scores. Additionally, as the AS/BS ratio increased, the G' and G″ values of the samples gradually rose, while the tan δ value exhibited a corresponding decrease. The morphological results showed that with the increase of AS/BS ratio, the microstructure of liangpi had larger but fewer pores. Furthermore, the XRD and FTIR analyses demonstrated an increase in ordered structures among starch granules with higher ratios of AS/BS, resulting in stronger hydrogen bonds in the AS-dominated liangpi. This study provides a comprehensive understanding of how the proportion of AS and BS influences the quality of liangpi, offering valuable insights for enhancing the quality of liangpi by adjusting the AS/BS ratio during the production process.

Saturated fatty acids as guest compounds in the annealing of high-amylose starch: Insights into fatty acid chain length and structural conformation

This study explores the effect of fatty acid chain length in regulating the structural changes and physicochemical properties of high-amylose maize starch (HAMS) induced by annealing with fatty acid solution (AFAS). AFAS was found to effectively regulate the conformation of amylose molecular chains within starch granules. Annealing with fatty acids of shorter chain length, such as lauric acid, promoted the formation of both double and single helices within HAMS granules. The single-helix fraction increased (up to 4.5 %) after AFAS treatment. HAMS modified with lauric acid exhibited the highest crystallinity (24.1 %). The level of structural changes varied for HAMS with shorter amylose chain length. Fatty acids with shorter chain lengths, such as lauric acid and myristic acid, induced higher levels of resistant starch (up to 65 %) under in vitro simulated digestion conditions. Pearson analysis revealed a significant negative correlation (p < 0.05) between the resistant starch content of the modified starch and the fatty-acid chain length complexed during AFAS. These findings suggest that the chain length of fatty acids affects the enzyme resistance of the modified starches, with shorter fatty-acid chain lengths being more effective in inducing ordered structures.

Influence of γ irradiation on the physicochemical properties of tapioca granular starch-ascorbyl palmitate complexes

The original starch was irradiated with γ-rays at doses ranging from 0 to 10 kGy to investigate how irradiation influences the formation of tapioca granular starch-ascorbyl palmitate (TGS-AP) complexes. The results indicated that the pretreatment of tapioca starch with appropriate irradiation doses effectively increased the content of AP encapsulated in the complex, and the loading efficiency increased from 22.74 % (0 kGy) to a maximum of 32.95 % (2.5 kGy). Compared with the control complexes, the rapid visco analyzer (RVA) pasting profiles of the TGS-AP complexes changed significantly, with new viscosity peaks appearing during the cooling and holding stages. The swelling power, relative crystallinity, and thermal stability of the complexes were remarkably elevated to maximum increases of 116.50 %, 21.45 %, and 82.61 %, respectively, and the melting enthalpies of the complexes increased slightly after the native tapioca starch was subjected to irradiation. This study could serve as a basis for the development of a green and efficient process for the production of starch-lipid complexes.

Formation of the rosette-like starch with enhanced V-type crystallization via modified solvent-shifting method

This research investigated the effect modified solvent-shifting method on the formation, ordered structure, and morphology of V-type starch. Ionic liquid (IL) dissolution and hot ethanol aqueous incubation in gradient concentrations from 30 % to 80 % (v/v) were applied to optimize the relative crystallinity of V-type starch. The results showed that this new method worked in producing V-type conformation, and higher ethanol concentration tended to yield V-type starch with higher crystallinity and more disk-like shape structure within the ethanol range of 30-50 % (v/v). Notably, the crystalline order of V-type starch reached the maximum with a specific rosette-like morphology under the condition of an ethanol concentration of 50 % (v/v). While the grown crystals organized into small-size flower-like assemblies and this morphology even disappeared accompanied by the V-type crystallization weakening when starch chains co-crystallized with the ethanol concentrations of 60 %-80 % (v/v). The molecular structure analysis indicated no significant correlation between the relative crystallinity of V-type starch and its fine structure. IL served to promote the formation of V-type starch, while it didn't participate in the formation process and could be removed during the washing process. The findings can provide new insights into developing a bottom-up pathway for regulating crystallization and morphology of V-type starch.

A novel starch from Trichosanthes kirilowii roots: A comparison of its composition, structure and physicochemical properties with conventional root starch

This study investigated the properties of a novel medicinal starch isolated from the roots of Trichosanthes kirilowii (TKRS). The multiscale structural and physicochemical properties of TKRS were characterized and compared with two common starches, sweet potato starch (SPS) and kudzu starch (KS), to elucidate the influence of structural characteristics on the physicochemical properties of these root starches. TKRS granules exhibited elliptical and irregular polygonal shapes, with the largest median particle size (14.48 μm). TKRS had a lower amylose content (15.03 %) and a lower molecular weight (8.40 × 107 g/mol). XRD analysis confirmed a C-type crystallinity pattern, with a higher crystallinity degree (21.51 %) and a high degree of short-range ordered structure. Further analysis of the chain length distribution revealed that TKRS contained a larger proportion of long-chain amylopectin. Compared to SPS and KS, TKRS showed a lower gelatinization temperature (72.65 °C) but a higher peak viscosity (7351 cP). Additionally, despite its relatively lower water retention capacity, TKRS exhibited higher storage modulus and loss modulus than conventional tuber starches. In vitro digestibility analysis indicated that TKRS had a lower rapidly digestible starch content and a higher resistant starch content, highlighting its potential for processing into healthy starch-based food products.

Oil-in-water emulsion activity and stability of short-term retrograded starches depend on starch molecular size, amylose content, and amylopectin chain length

BACKGROUND

Natural emulsifiers are increasingly preferred by the food industry to meet consumers' demand for 'clean-label' emulsion products. In the present study, 10 short-term retrograded starches with unique molecular structures were explored to examine the relationships between starch structures and their ability to form stable oil-in-water emulsions.

RESULTS

Waxy maize starch showed the largest value of contact angle and conductivity of emulsion, whereas potato and lentil starch showed the lowest value of contact angle and conductivity of emulsion, respectively. Emulsion prepared by rice starch showed the lowest, whereas that of sweet potato starch showed the highest value of viscosity. Consequentially, the emulsion stabilized with waxy maize and tapioca starch showed the smallest and less polydisperse droplets, resulting in a much higher emulsifying index. On the other hand, emulsion prepared with potato starch showed the highest stability compared to other starches. Correlation analysis suggested that starches with larger molecular size, a lower amylose content and shorter amylopectin short chains had a higher emulsification ability, whereas the amount of starch molecular interactions formed during short-term retrogradation revealed no obvious linking to emulsion performances.

CONCLUSION

These findings provided food industry with exciting opportunities to develop 'clean-label' emulsions with desirable properties. © 2024 Society of Chemical Industry.

Loss-of-function of SSIIa and SSIIIa confers high resistant starch content in rice endosperm

Rice (Oryza sativa L.) endosperm accumulates huge amounts of starch. Rice starch is highly digestible, potentially enhancing the occurrence of blood sugar- and intestine-related diseases such as type 2 diabetes. Resistant starch (RS) is hardly digestible in small intestine but can be converted into beneficial short-chain fatty acids in large intestine, potentially reducing the incidence of these diseases. However, it is still difficult to produce a high RS rice variety. Here, we report that simultaneous deficiency of soluble starch synthases IIa and IIIa confers high RS content in rice endosperm. The ssIIa ssIIIa exhibited higher RS content than did the ssIIIa ssIIIb, a mutant reported currently to have remarkably higher RS content than parental ssIIIa, under our experimental conditions. Loss-of-function of SSIIa and SSIIIa significantly elevated the activity of granule-bound starch synthase I and thus content of amylose. Furthermore, total lipid content increased in mutant seeds, implying that intermediate metabolites spilled out from starch biosynthesis into lipid biosynthesis. The increased amylose content and improved lipid synthesis coordinately contributed to high RS content in mutant seeds. These results further reveal the molecular mechanism of RS occurrence in rice endosperm and provide a critical genetic resource for breeding higher RS rice cultivars.

Mechanistic understanding of changes in physicochemical properties of different rice starches under high hydrostatic pressure treatment based on molecular and supramolecular structures

The molecular and supramolecular structures of japonica and waxy rice starches under high hydrostatic pressure treatment (450 MPa) were studied and the changes in physicochemical properties were analyzed based on these structures. The molecular structures of japonica and waxy rice starch cause differences in the lamellar structure and physicochemical properties. The thickness of amorphous lamella of japonica rice starch increased at 5 min (2.95 nm) followed by a gradual collapse of lamellar structure. Whereas the thickness of crystalline lamellae of waxy rice starch increased at 15 min (5.92 nm) and the lamellae collapsed suddenly at 20 min. The pasting, rheological and textural characteristics of both starches increased significantly within 10 to 15 min. The decreasing onset temperature and enthalpy of high hydrostatic pressure-treated starches indicated easier gelatinization. High hydrostatic pressure-treatment offers potential for developing starch-based products with low swelling capacity, easy gelatinization, high viscosity and hardness.

Targeting gut microbiota by starch molecular size and chain-length distribution to produce various short-chain fatty acids

The detailed relationships among starch fine molecular structures, gut microbiota, and short-chain fatty acids (SCFAs) are not fully understood. We hypothesized that specific starch molecular size and chain-length distribution are favored by gut bacteria for the secretion of SCFAs. To investigate this, different types of starches with diverse molecular size and chain-length distributions (e.g., amylose content ranging from about 1 % to 38 %) were subjected to in vitro fermentation with human fecal inocula. Tapioca and waxy maize starches were notably more effective at producing acetate and propionate compared to lentil, wheat, and pea starches (p < 0.05). Correlation analysis revealed, for the first time, that the number of amylose chains with a degree of polymerization between 500 and 5000 was positively correlated with the abundance of Bacteroides_coprocola_DSM_17136 and Bacteroides_plebeius, possibly relating to the higher production of acetate and propionate. These results indicate that starches with certain fine molecular structures could be used to target gut bacteria to produce various types of SCFAs, thereby amplifying beneficial effects on human health.

Green fabrication of hierarchical pore starch with controllable pore size and shape based on different amylose-amylopectin ratios

Porous starch (PS) was widely prepared for its large effective surface area, pore volume, and superior hydrophilic property, but its application is limited by enzyme and chemical use. In this study, a novel method to prepare PS with controllable hierarchical pores through ultrasound-ethanol precipitation and different amylose-amylopectin ratios is proposed. As shown in porous morphology and parameters, there were macropores, mesopores and micropores in the formed PS. Moreover, we found that the content of amylose (AM) was negatively related with the total pore volume and pore diameter in PS. The different surface tensions created through ethanol evaporation and water migration during oven drying are the main mechanisms of forming pores with controllable sizes. Based on the molecular information and the long-/short-range orders reflected by crystalline pattern, lamellas, and single-/double-helices, we conclude that AM is easier to form V-type inclusion complexes with ethanol. More single helix of V-amylose was transformed from B-type polymorph after ethanol exchange, which had significantly broadened dLozentz in PS. The TG spectra proved that the novel PS has the stable thermodynamic property. Overall, the finding of an objective regular between AM and pore sizes of PS in this study may support the other work related to PS.

Starch molecular structure and diabetes

Starch is a primary source of food energy for human beings. Its chain-length distribution (CLD) is a major structural feature influencing physiologically-important properties, such as digestibility and palatability, of starch-containing foods. Diabetes, which is of epidemic proportions in many countries, is related to the rate of starch digestion in foods. Isoforms of three biosynthesis enzymes, starch synthase, starch branching enzymes and debranching enzymes, control the CLDs of starch, which can be measured by methods such as size-exclusion chromatography and fluorophore-assisted carbohydrate electrophoresis. Fitting observed CLDs to biosynthesis-based models based on the ratios of the activities of those isoforms yields biosynthesis-related parameters describing CLD features. This review examines CLD measurement, fitting CLDs to models, relations between CLDs, the occurrence and management of diabetes, and how plant breeders can develop varieties to optimize digestibility and palatability together, to develop starch-based foods with both a lower risk of diabetes and acceptable taste.

Increasing degree of substitution inhibits acetate while promotes butyrate production during in vitro fermentation of citric acid-modified rice starch

Citric acid-modified starch functions as a resistant starch, while the combined effects of its fine molecular structure and degree of substitution on gut microbiota are not well understood. To this end, citric acid-modified starches with varying degrees of substitution were synthesized from rice starches with distinct molecular structures and their impact on gut microbiota composition and short-chain fatty acid (SCFA) production was analyzed. Notably, rice starch with a higher degree of substitution significantly reduced acetate production, while promoted butyrate production. Correlation analysis further suggested that amylopectin chains with 12 < DP ≤ 36 and amylose chains with 100 < DP ≤ 500 alter the growth of Faecalibacterium_prausnitzii and Bacteroides_vulgatus, consequentially determining the production of SCFAs. Collectively, these findings indicate that citric acid-modified rice starch with different degrees of substitution can target specific gut bacteria and SCFA production, thus conferring beneficial impact on human health.

Chromatographic analysis of branched and debranched starch structure: Variability of their results

Starch structure determination is crucial for understanding its properties and applications. However, method-dependent variations in size determination can lead to ambiguous interpretations. This study investigates the ambiguities in starch structure determination by evaluating the variation in size of four commercial branched starches as determined by average molar mass, gyration radius, hydrodynamic radius, and chain-length distribution. The starches were analyzed using high-performance size-exclusion chromatography (HPSEC) coupled with multi-angle laser light scattering (MALLS) and refractive index detector (RI), and after debranching by HPSEC-RI and high-performance anion-exchange chromatography (HPAEC) with pulsed amperometric detector (PAD). MALLS-derived MW values for amylose and amylopectin were higher than those obtained using the hydrodynamic volume method. The molecular weight of amylopectin chains, determined by the degree of polymerization (DP), ranged between 2.1 and 2.9 × 103 g/mol for short chains, and between 4.1 × 103 and 1.1 × 104 g/mol for long chains. Differences in amylopectin chain content were observed between HPSEC-RI and HPAEC-PAD, highlighting the complementary nature of these techniques. The study underscores the need for standardizing chromatography-based methodologies in starch research, particularly with the advent of new technologies.

Multi-scale structural insights on starch digestibility of instant rice

Multi-scale structures were investigated to understand starch digestibility of instant rice. A wide range of maximum starch digested ratio, up to about 20%, was observed among instant rice prepared from different rice varieties. Instant rice with a smooth and densely packed cross-section showed slower starch digestibility than those with a porous and loosely packed structure. All samples displayed B + V type crystallinity, with V-type crystallinity negatively correlating with maximum starch digested percentage. After digestion, starch chain-length distributions were significantly altered: rapidly digested starch comprised long amylose and short amylopectin chains, while slowly digested starch comprised chains with a peak degree of polymerization (DP) around 130. These results indicate that instant rice with a compact microstructure, high V-type crystallinity, and DP 130 fractions during digestion can reduce starch digestibility. This study provides insights for food industry to develop instant rice products with slow starch digestibility, potentially improving human health.

The accumulation and properties of starch are associated with the development of nutrient transport tissues at grain positions in the spikelet of wheat

A wheat spikelet accumulates several grains, which show significant positional effects in terms of size, weight, and material accumulation. However, few studies have investigated whether starch accumulation in these grains is related to the development of vascular bundles. This study analyzed the correlation between the morphology of vascular bundles and starch accumulation. The area of nutrient transport tissues in G1 and G2 was greater than that in G3 and G4. The proportion of A-type starch granules in G3 and G4 was significantly greater than that in G1 and G2, with the greatest proportion of C-type starch granules occurring in G2. The short-order structure of the starch granules in G1 was more developed than that in the other samples, and the crystalline region in G2 was the greatest. The area of the nucellar projection and vascular bundle was positively correlated with C- or B-type starch granules but negatively correlated with A-type starch granules and swelling power. The area of wall ingrowth was positively correlated with the proportion of branch chains (DP 25-36 and DP 37-100), and negatively correlated with the starch content. The above results indicate that the developmental status of the vascular bundles in the wheat grains controls the accumulation, composition, and characteristics of starch in the endosperm. The novelty of this study lies in elucidating the grain position effect on starch accumulation in wheat grains. This provides a new perspective for agricultural production, aiming to enhance the accumulation of carbohydrates in inferior grains, thereby facilitating their transformation into superior grains.

Impact of sugar and sugar alcohol on the pasting and retrogradation properties of starch with distinct molecular structures

The molecular structures of starch and sugar/sugar alcohol are recognized as critical determinants of starch pasting and retrogradation properties. However, their combined effects on these properties remain elusive. This study for the first time examined the pasting and retrogradation properties of nine starches with diverse molecular structures, both with and without the addition of glucose, sucrose, isomaltose, isomalt, and sorbitol. The presence of sugar/sugar alcohol significantly enhanced starch pasting viscosity. In particular, the variations of the peak viscosity of wheat starch were more pronounced than other starches, possibly due to its distinct molecular structures. The changes in melting temperatures and enthalpy of retrograded starches were complex, varying depending on the type of starch and sugar/sugar alcohol used. For example, the melting peak temperature ranged from 56.45 °C (TS) to 61.9 °C (WMS), and the melting enthalpy ranged from 0.16 J/g (TS) to 5.6 J/g (PES). The micromorphology of retrograded starch revealed agglomeration and needle-like structures, instead of a network structure, after the addition of glucose and sorbitol, respectively. Correlations between starch molecular structure and pasting properties remained largely unchanged, while the relationship between starch molecular structure and retrogradation properties exhibited notable variations after the addition of sugars or sugar alcohols. These findings help a better understanding of the effects of starch molecular structure and the presence of sugar/sugar alcohol on starch pasting and retrogradation properties.

The effect of cold plasma on starch: Structure and performance

The inherent side effects of the physico-chemical properties of native starches often severely limit their use in food and non-food industries. Plasma is a non-thermal technology that allows rapid improvement of functional properties. This review provides a comprehensive summary of the sources and mechanisms of action of cold plasma and assesses its effects on starch morphology, crystal structure, molecular chain structure and physicochemical properties. The complex relationship between structure and function of plasma-treated starch is also explored. Potential applications of plasma-modified starch are also discussed in detail. The outcome of the modification process is influenced by factors such as starch type and concentration, plasma source, intensity and duration. The properties of starch can be effectively optimised using plasma technology. Plasma-based technologies therefore have the potential to modify starch to create a range of functionalities to meet the growing market demand for clean label ingredients.

Normal and abnormal glycogen structure - A review

Glycogen, a complex branched glucose polymer, is found in animals and bacteria, where it serves as an energy storage molecule. It has linear (1 → 4)-α glycosidic bonds between anhydroglucose monomer units, with branch points connected by (1 → 6)-α bonds. Individual glycogen molecules are referred to as β particles. In organs like the liver and heart, these β particles can bind into larger aggregate α particles, which exhibit a rosette-like morphology. The mechanisms and bonding underlying the aggregation process are not fully understood. For example, mammalian liver glycogen has been observed to be molecularly fragile under certain conditions, such as glycogen from diabetic livers fragmenting when exposed to dimethyl sulfoxide (DMSO), while glycogen from healthy livers is much less fragile; this indicates some difference, as yet unknown, in the bonding between β particles in healthy and diabetic glycogen. This fragility may have implications for blood sugar regulation, especially in pathological conditions such as diabetes.

High-Resistant Starch Based on Amylopectin Cluster via Extrusion: From the Perspective of Chain-Length Distribution and Structural Formation

Resistant starch (RS) has the advantage of reshaping gut microbiota for human metabolism and health, like glycemic control, weight loss, etc. Among them, RS3 prepared from pure starch is green and safe, but it is hard to achieve structural control. Here, we regulate the crystal structure of starch with different chain-length distributions (CLDs) via extrusion at low/high shearing levels. The change in CLDs in extruded starch was obtained, and their effects on the fine structure (Dm, dBragg, dLorentz, degree of order and double helix, degree of crystal) of RS and its physicochemical properties were investigated by SAXS, FTIR, XRD and 13C NMR analyses. The results showed that the RS content under a 250 r/min extrusion condition was the highest at 61.52%. Furthermore, the crystalline system induced by high amylopectin (amylose ≤ 4.78%) and a small amount of amylose (amylose ≥ 27.97%) was favorable for obtaining a high content of RS3-modified products under the extruding environment. The control of the moderate proportion of the A chains (DP 6-12) in the starch matrix was beneficial to the formation of RS.

The importance of starch chain-length distribution for in vitro digestion of ungelatinized and retrograded foxtail millet starch

The digestibility of ungelatinized, short-term retrograded and long-term retrograded starch from foxtail millet was investigated and correlated with starch chain length distributions (CLDs). Some variations in starch CLDs of different varieties were obtained. Huangjingu and Zhonggu 9 had higher average chain lengths of debranched starch and lower average chain length ratios of amylopectin and amylose than Dajinmiao and Jigu 168. Compared to ungelatinized starch, retrogradation significantly increased the estimated glycemic index (eGI), whereas significantly decreased the resistant starch (RS). In contrast, long-term retrograded starches have lower eGI (93.33-97.37) and higher RS (8.04-14.55%) than short-term retrograded starch. PCA and correlation analysis showed that amylopectin with higher amounts of long chains and longer long chains contributed to reduced digestibility in ungelatinized starch. Both amylose and amylopectin CLDs were important for the digestibility of retrograded starch. This study helps a better understanding of the interaction of starch CLDs and digestibility during retrogradation.

Amylopectin chain length distributions and amylose content are determinants of viscoelasticity and digestibility differences in mung bean starch and proso millet starch

This study aimed to reveal the underlying mechanisms of the differences in viscoelasticity and digestibility between mung bean starch (MBS) and proso millet starch (PMS) from the viewpoint of starch fine molecular structure. The contents of amylopectin B2 chains (14.94-15.09 %), amylopectin B3 chains (14.48-15.07 %) and amylose long chains (183.55-198.84) in MBS were significantly higher than PMS (10.45-10.76 %, 12.48-14.07 % and 70.59-88.03, respectively). MBS with higher amylose content (AC, 28.45-31.80 %) not only exhibited a lower weight-average molar mass (91,750.65-128,120.44 kDa) and R1047/1022 (1.1520-1.1904), but also was significantly lower than PMS in relative crystallinity (15.22-23.18 %, p < 0.05). MBS displayed a higher storage modulus (G') and loss modulus (G'') than PMS. Although only MBS-1 showed two distinct and discontinuous phases, MBS exhibited a higher resistant starch (RS) content than PMS (31.63-39.23 %), with MBS-3 having the highest RS content (56.15 %). Correlation analysis suggested that the amylopectin chain length distributions and AC played an important role in affecting the crystal structure, viscoelastic properties and in vitro starch digestibility of MBS and PMS. These results will provide a theoretical and scientific basis for the development of starch science and industrial production of low glycemic index starchy food.

The important role of starch fine molecular structures in starch gelatinization property with addition of sugars/sugar alcohols

The relationship between the fine structure of starch and its gelatinization properties is not well studied, particularly in relation to the influence of sugar or sugar alcohol. In this study, seven starches with distinct molecular structures were investigated to determine how different sugars and sugar alcohols affect their gelatinization properties. The inclusion of sugars and sugar alcohols resulted in a significant elevation of starch gelatinization temperatures (∼ 8 °C), especially with sucrose, isomaltose and isomalt. Nevertheless, the influence of these sugars/ sugar alcohols on the gelatinization temperature range and enthalpy change varied depending on the particular starch varieties. According to the correlation analysis, sugars and sugar alcohols mainly exert their impact on the starch gelatinization temperature range and enthalpy change by possibly interacting with amylose chains possessing a degree of polymerization ranging from 100 to 1000 (p < 0.05) and inhibiting the amylose leaching during gelatinization. These findings help a better understanding of the complex relationship between starch fine structure and gelatinization properties under the influence of sugars and sugar alcohols.

Structure and functional characteristics of starch from different hulled oats cultivated in China

This work aimed to evaluate the structure and functional characteristics of starch from ten hulled oat cultivars grown in different locations in China. The protein, phosphorus, amylose, and starch contents were 0.2-0.4 %, 475.7-691.8 ppm, 16.2-23.0 %, and 93.6-96.7 %, respectively. All the starches showed irregular polygonal shapes and A-type crystallization with molecular weights ranging from 7.2 × 107 to 4.5 × 108 g/mol. The amounts of amylopectin A (DP 6-12), B1 (DP 13-24), B2 (DP 25-36), and B3 (DP > 36) chains were in the ranges of 10.3-16.0 %, 54.5-64.8 %, 16.5-21.1 %, and 4.9-13.1 %, respectively. The starches differed significantly in gelatinization temperatures, pasting viscosity, solubility, swelling power, rheological properties, and digestion parameters. The results revealed that the larger particle size could increase the peak viscosity of the starch paste. The presence of phosphorus increased the gelatinization temperature and enhanced the resistant starch content. The starch granules with higher crystallinity contained a higher proportion of phosphate, which increased final viscosity and setback viscosity but decreased rapidly digestible starch. Overall, oat starch with a high phosphorus content could be used to prepare low-glycemic-index food for diabetes patients.

Structural characteristics and biological activities of polysaccharides from barley: a review

Barley (Hordeum vulgare L.) is rich in starch and non-starch polysaccharides (NSPs), especially β-glucan and arabinoxylan. Genotypes and isolation methods may affect their structural characteristics, properties and biological activities. The structure-activity relationships of NSPs in barley have not been paid much attention. This review summarizes the extraction methods, structural characteristics and physicochemical properties of barley polysaccharides. Moreover, the roles of barley β-glucan and arabinoxylan in the immune system, glucose metabolism, regulation of lipid metabolism and absorption of mineral elements are summarized. This review may help in the development of functional products in barley.

Importance of both leached and residual starch molecular structures in determining cooked rice texture at different rice-to-water cooking ratios

Although texture of cooked rice has been investigated with regard to its relation to starch structure, it remains unclear how starch molecular structure and water content together affect its texture. Thus, the texture, and starch molecular structure of 10 rice varieties and their leachates during cooking were studied with a range of rice-to-water ratios. Although hardness of cooked rice decreased, no trend for the alteration of stickiness observed over the increase of water content. Generally, more amylopectin with DP 12-36 and amylose with DP 5000-20,000 in leachate, less starch molecules with DP > 36 in residual materials resulted in a higher stickiness of cooked rice, which is rationalized by their slower retrogradation tendency and higher amount of non-reducing ends available for binding to textural probe. Rice-to-water ratio was another crucial factor in determining relations between starch structures and cooked rice texture. For example, more leached amylopectin with DP 12-100 resulted in a higher stickiness of cooked rice, while this was not the case for rice cooked at rice-to-water ratios of 1: 1.2 and 1: 1.4. These results give new insights on the effects of starch molecular structure and water content on the cooked rice texture.

Effects of nitrogen application on physicochemical properties of rice starch under elevated temperature

Nitrogen fertilization can mitigate the negative effects of high temperatures on rice. In this study, we simulated dynamic field temperature increases using a free-air temperature enhancement system. Changes in the physicochemical properties of starch were investigated under increasing nitrogen fertilization during the grain-filling stage. We observed that the application of nitrogen at elevated temperatures (ETN) did not change the chain length distribution compared with elevated temperatures (ET) alone; however, it did significantly increase the heights of the first and second amylose peaks. Specifically, ETN significantly decreased the height of fifth amylopectin and relative crystallinity, and the changes it introduced in the physicochemical properties of starch were greater than those of ET. Overall, these changes in starch properties may be associated with the ability of nitrogen to facilitate the maintenance of rice quality at high temperatures.

A comparative study of grain quality and physicochemical properties of premium japonica rice from three typical production regions

Grain quality indicates rice commodity value. This research compared grain quality and physicochemical properties of premium japonica rice from three production regions, Yangtze River downstream of China (YRDCN), Northeast region of China (NECN) and Japan. Results showed that there were distinct quality and physicochemical characteristics variance among the three groups of japonica rice, while CVs of most quality parameters from low to high was Japan, YRDCN and NECN. YRDCN rice presented obvious lower apparent amylose content (AAC) and ratio of each chain-length sections of amylopectin, and showed higher protein contents especially glutelin and ratio in short and intermediate amylopectin molecules. Among three rice groups, YRDCN rice presented weaker appearance, whereas did not show inferior cooking and eating properties, which was primarily linked to lower AAC. Rice AAC and starch fine structure significantly correlated with pasting parameters, swelling power and solubility, while protein content had close relation with taste analyzer parameters. Results of this study indicated improvement direction for japonica rice of YRDCN, and also provided reference for consumers' rice purchasing selection in accordance with individual taste preference.

Altered leaching composition of maize starch granules by irradiative depolymerization: The key role of degraded molecular structure

The molecular composition of starch leachates from starch-based foods has been recently recognised as a crucial determinant of food properties. However, there is limited knowledge on the regulation of this composition through irradiative depolymerization of starch. This research investigates the leaching behaviour of maize starch depolymerized by electron beam irradiation, and the relationship between the composition of leached starch and structures of modified starch granules. The analysis using 1H NMR spectroscopy confirmed a decrease in the degree of branching (from 4.4 % to 2.8 %), while size-exclusion chromatography identified a newly-derived amylopectin fraction of a smaller hydrodynamic radius (approximately 60-80 nm). The structural properties of the starch granules were also analysed, revealing an increased BET-area of granules and reduced total crystallinity after depolymerization. In the leachates of swollen granules, the bimodal distribution of starch molecules evolves into unimodal with the increase of the irradiative dosage, while modified starch leached more starch molecules with Rh < 10 nm. The results of principal component analysis and Pearson correlation analysis indicate that the degree of branching of degraded starch molecules, as well as the newly-derived amylopectin fraction, significantly correlates (p < 0.01) with the molecular size of leached starch molecules (Rh < 10 nm). It is thus proposed that the cleavage of α-1,6 linkage may be a critical factor in controlling the leaching process of irradiated starch granules. This study highlights the potential of irradiative degradation to control the molecular composition and structure of starch leachates, thereby optimizing the properties of starch-based foods.

Altering structure and enzymatic resistance of high-amylose maize starch by irradiative depolymerization and annealing with palmitic acid as V-type inclusion compound

This study explored a new physical modification approach to regulate enzymatic resistance of high-amylose starch for potentially better nutritional outcomes. High-amylose maize starch (HAMS) was subjected to chain depolymerization by electron beam irradiation (EBI), followed by inducing ordered structure through annealing in palmitic acid solution (APAS). APAS treatment significantly promotes the formation of ordered structure. Starch after the combinative modification showed up to 5.2 % increase in total crystallinity and up to 1.2 % increase in V-type fraction. The EBI-APAS modification led to increased gelatinization temperature (from 66.1 to 87.6 °C) and reduced final digested percentage under in vitro stimulated digestion conditions. The moderate extent of depolymerization resulted in higher enzymatic resistance, indicating that the extent of depolymerization is crucial in EBI-APAS modification. Pearson analysis showed a significant correlation between gelatinization onset temperature and digestion kinetic parameter (k1, rate constant of fast-phase digestion). Overall, the result suggests that ordered structures of degraded molecules induced by the combinative modification contribute to the enzymatic resistance of starch. This study sheds lights on future applications of EBI-APAS approach to regulate multi-scale structures and nutritional values of high-amylose starch.

Starch chain-length distributions determine cooked foxtail millet texture and starch physicochemical properties

Starch chain-length distributions play an important role in controlling cereal product texture and starch physicochemical properties. Cooked foxtail millet texture and starch physicochemical properties were investigated and correlated with starch chain-length distributions in eight foxtail millet varieties. The average chain lengths of amylopectin and amylose were in the range of DP 24-25 and DP 878-1128, respectively. The percentage of short amylopectin chains (Ap1) was negatively correlated with hardness but positively correlated with adhesiveness and cohesion. Conversely, the amount of amylose intermediate chains was positively correlated with hardness but negatively correlated with adhesiveness and cohesion. Additionally, the amount of amylose long chains was negatively correlated with adhesiveness and chewiness. The relative crystallinity (RC) of starch decreased with reductions in the length of amylopectin short chains in foxtail millet. Pasting properties were mainly influenced by the relative length of amylopectin side chains and the percentage of long amylopectin branches (Ap2). Longer amylopectin long chains resulted in lower gelatinization temperature and enthalpy (ΔH). The amount of starch branched chains had important effects on the gelatinization temperature range (ΔT). These results can provide guidance for breeders and food scientists in the selection of foxtail millet with improved quality properties.

Periodic changes in chain lengths distribution parameters of wheat starch during endosperm development

This study analyzed the molecular structure of developing wheat endosperm starch at different stages after anthesis (DAA) using chain length distribution analysis by size exclusion chromatography (SEC) and fluorophore-assisted carbohydrate electrophoresis. Our results revealed periodic changes in the content of both amylose and amylopectin fractions. Specifically, the content of amylose chains with a degree of polymerization (DP) > 100 significantly decreased from 5 to 10 DAA (28% to 21%) and from 15 to 20 DAA (29% to 26%), but increased between 10 and 15 DAA (21% to 29%) and 20 to 25 DAA (30.0% to 33%). Conversely, the content of short amylopectin chains with DP ≤ 32 showed the opposite trend. Interestingly, mRNA expression levels of key starch biosynthesis genes did not exhibit periodic changes. These findings contribute to our understanding of starch biosynthesis and provide important insights for the development of starch-based products.

Effects of Starch Molecular Structure and Physicochemical Properties on Eating Quality of Indica Rice with Similar Apparent Amylose and Protein Contents

It is important to clarify the effects of starch fine structure and protein components on the eating quality of indica rice. In this study, seven indica rice varieties with similar apparent amylose content (AAC) and protein content (PC) but different sensory taste values were selected and compared systematically. It was found that except for AAC and PC, these varieties showed significant differences in starch molecular structure and protein components. Compared with rice varieties with a low sensory taste value, varieties with a higher sensory taste value showed significantly lower amylose and higher amylopectin short chains (degree of polymerization 6-12) content; the protein component showed that the varieties with good taste value had higher albumin and lower globulin and glutelin content (p < 0.05). Rice varieties with lower AC, globulin, and glutelin content, as well as a higher content of albumin and amylopectin short chains, resulted in a higher swelling factor, peak viscosity, breakdown value, and ratio of hardness to stickiness, in which condition cooked rice showed a higher sensory taste value. Moreover, this study indicated that rice varieties with a higher content of albumin and amylopectin short chains were conducive to the good appearance of cooked rice. This study lays the foundation for the taste evaluation of good-tasting indica rice.

Critical examination of the characterization techniques, and the evidence, for the existence of extra-long amylopectin chains

It has been suggested that amylopectin can contain small but significant amounts of extra-long chains (ELCs), which could affect functional properties, and also would have implications for the mechanism of starch biosynthesis. However, current evidence for the existence of ELCs is ambiguous. The amylose/amylopectin separation and the characterization techniques used for the investigation of ELCs are reviewed, problems in those techniques are examined, and studies of ELCs of amylopectin are discussed. A model for the biosynthesis of amylopectin chains in terms of conventional biosynthesis enzymes, which provides an excellent fit to a large amount of experimental data, is used to provide a rigorous definition of ELCs. In addition, current investigations of ELCs, involving separation, is hindered by the lack of a method to quantitatively separate all the amylopectin from starch without any traces of residual amylose (which would have long chains). Unambiguous evidence for the existence of ELCs can be obtained using two-dimensional (2D) characterization, these dimensions being the degree of polymerization of a chain and the size of the whole molecule. Available 2D data indicate that there are no ELCs present in currently detectable quantities in native rice starches. However, concluding this more rigorously requires improvements in the resolution of current 2D methods.

Hierarchical structural modification of starch via non-thermal plasma: A state-of-the-art review

The hierarchical architecture of natural and processed starches with different surface and internal structures determines their final physicochemical properties. However, the oriented control of starch structure presents a significant challenge, and non-thermal plasma (cold plasma, CP) has gradually been used to design and tailor starch macromolecules, though without clear illustration. In this review, the multi-scale structure (i.e., chain-length distribution, crystal structure, lamellar structure, and particle surface) of starch is summarized by CP treatment. The plasma type, mode, medium gas and mechanism are also illustrated, as well as their sustainable food applications, such as in food taste, safety, and packaging. The effects of CP on the chain-length distribution, lamellar structure, amorphous zone, and particle surface/core of starch includes irregularity due to the complex of CP types, action modes, and reactive conditions. CP-induced chain breaks lead to short-chain distributions in starch, but this rule is no longer useful when CP is combined with other physical treatments. The degree but not type of starch crystals is indirectly influenced by CP through attacking the amorphous region. Furthermore, the CP-induced surface corrosion and channel disintegration of starch cause changes in functional properties for starch-related applications.

Effects of the Molecular Structure of Starch in Foods on Human Health

Starch provides approximately half of humans' food energy, and its structural features influence human health. The most important structural feature is the chain length distribution (CLD), which affects properties such as the digestibility of starch-containing foods. The rate of digestion of such foods has a strong correlation with the prevalence and treatment of diseases such as diabetes, cardiovascular disease and obesity. Starch CLDs can be divided into multiple regions of degrees of polymerization, wherein the CLD in a given region is predominantly, but not exclusively, formed by a particular set of starch biosynthesis enzymes: starch synthases, starch branching enzymes and debranching enzymes. Biosynthesis-based models have been developed relating the ratios of the various enzyme activities in each set to the CLD component produced by that set. Fitting the observed CLDs to these models yields a small number of biosynthesis-related parameters, which, taken together, describe the entire CLD. This review highlights how CLDs can be measured and how the model-based parameters obtained from fitting these distributions are related to the properties of starch-based foods significant for health, and it considers how this knowledge could be used to develop plant varieties to provide foods with improved properties.

Importance of amylose chain-length distribution in determining starch gelatinization and retrogradation property of wheat flour in the presence of different salts

Although starch gelatinization and retrogradation properties of wheat flour have been studied with respect to their relations to starch structures, it remains less understood how starch structure and salt (a common food additive) together determine these properties. Gelatinization and retrogradation properties of seven wheat flours with distinct starch structures were thus investigated after adding different salts. NaCl most efficiently increased starch gelatinization temperatures, while KCl showed highest efficiency in retarding the retrogradation degree. Both gelatinization and retrogradation parameters were significantly affected by amylose structural parameters and types of salts. E.g., wheat flours with longer amylose long chains had more heterogeneous amylopectin double helices during gelatinization, while this relationship disappeared after adding NaCl. More amylose short chains increased the heterogeneity of retrograded short-range starch double helices, while the relationship was opposite after adding NaCl. These results help a better understanding of the complex relationship between starch structure and physicochemical property.

A procedure for determining the number and pattern of digestible starch fractions in multiphasic food digestograms

BACKGROUND

Plant-based foods are frequently heterogenous systems, containing multiple starch fractions with distinct digestion rate constants. An unbiased determination of the number and digestion pattern of these fractions is a prerequisite for understanding the digestive characteristics of food.

RESULTS

A non-linear least-squares procedure based on a conditional selection of simple first-order kinetics or a combination of parallel and sequential kinetics models was developed. The procedure gave robust results fitting manually generated data, and was applied to in vitro experimental digestion data of retrograded rice starches. By correlating fitting parameters with starch structural parameters, it showed that rice starches with a lower amylose content, longer amylose chains, and amylopectin intermediate chains had more digestible starch fractions after long-term retrogradation.

CONCLUSION

This procedure enables the structural basis of starch digestibility and the development of food products with slow starch digestibility to be better understood. © 2022 Society of Chemical Industry.

Pho1 cooperates with DPE1 to control short maltooligosaccharide mobilization during starch synthesis initiation in rice endosperm

Plastidial α-glucan phosphorylase is a key factor that cooperates with plastidial disproportionating enzyme to control short maltooligosaccharide mobilization during the initiation process of starch molecule synthesis in developing rice endosperm. Storage starch synthesis is essential for grain filling. However, little is known about how cereal endosperm controls starch synthesis initiation. One of core events for starch synthesis initiation is short maltooligosaccharide (MOS) mobilization consisting of long MOS primer production and excess MOS breakdown. By mutant analyses and biochemical investigations, we present here functional identifications of plastidial α-glucan phosphorylase (Pho1) and disproportionating enzyme (DPE1) during starch synthesis initiation in rice (Oryza sativa) endosperm. Pho1 deficiency impaired MOS mobilization, triggering short MOS accumulation and starch synthesis reduction during early seed development. The mutant seeds differed significantly in MOS level and starch content at 15 days after flowering and exhibited diverse endosperm phenotypes during mid-late seed development: ranging from pseudonormal to shrunken (Shr), severely or excessively Shr. The level of DPE1 was almost normal in the PN seeds but significantly reduced in the Shr seeds. Overexpression of DPE1 in pho1 resulted in plump seeds only. DPE1 deficiency had no obvious effects on MOS mobilization. Knockout of DPE1 in pho1 completely blocked MOS mobilization, resulting in severely and excessively Shr seeds only. These findings show that Pho1 cooperates with DPE1 to control short MOS mobilization during starch synthesis initiation in rice endosperm.

Identification of a new allele of soluble starch synthase IIIa involved in the elongation of amylopectin long chains in a chalky rice mutant

A chalky endosperm mutant (GM03) induced from an indica rice GLA4 was used to investigate the functional gene in starch biosynthesis. Bulked segregant analysis and sanger sequencing determined that a novel mutation in soluble starch synthase IIIa (SSIIIa) is responsible for the chalky phenotype in GM03. Complementary test by transforming the active SSIIIa gene driven by its native promoter to GM03 recovered the phenotype to its wildtype. The expression of SSIIIa was significantly decreased, while SSIIIa protein was not detected in GM03. The mutation of SSIIIa led to increased expression of most of starch synthesis related genes and elevated the levels of most of proteins in GM03. The CRISPR/Cas9 technology was used for targeted disruption of SSIIIa, and the mutant lines exhibited chalky endosperm which phenocopied the GM03. Additionally, the starch fine structure in the knockout mutant lines ss3a-1 and ss3a-2 was similar with the GM03, which showed increased amylose content, higher proportions of B1 and B2 chains, much lower proportions of B3 chains and decreased degree of crystallinity, leading to altered thermal properties with lower gelatinization temperature and enthalpy. Collectively, these results suggested that SSIIIa plays an important role in starch synthesis by elongating amylopectin long chains in rice.

Combined Effects of BEIIb and SSIIa Alleles on Amylose Contents, Starch Fine Structures and Physicochemical Properties of Indica Rice

Starch branching enzyme IIb (BEIIb) and soluble starch synthase IIa (SSIIa) play important roles in starch biosynthesis in cereals. Deficiency in the BEIIb gene produces the amylose extender (ae) mutant rice strain with increased amylose content (AC) and changes in the amylopectin structure. The SSIIa gene is responsible for the genetic control of gelatinization temperature (GT). The combined effects of BEIIb and SSIIa alleles on the AC, fine structures, and physicochemical properties of starches from 12 rice accessions including 10 recombinant inbred lines (RIL) and their two parents were examined in this study. Under the active BEIIb background, starches with the SSIIa-GC allele showed a higher GT than those with the SSIIa-TT allele, resulting from a lower proportion of A chain and a larger proportion of B1 chains in the amylopectin of SSIIa-GC. However, starch with the BEIIb mutant allele (be2b) in combination with any SSIIa genotype displayed more amylose long chains, higher amylose content, B2 and B3 chains, and molecular order, but smaller relative crystallinity and proportion of amylopectin A and B1 chains than those with BEIIb, leading to a higher GT and lower paste viscosities. These results suggest that BEIIb is more important in determining the structural and physicochemical properties than SSIIa. These results provide additional insights into the structure-function relationship in indica rice rather than that in japonica rice and are useful for breeding rice with high amylose content and high resistant starch.

The Effects of Starch Molecular Fine Structure on Thermal and Digestion Properties of Rice Starch

Whole white rice is a major staple food for human consumption, with its starch digestion rate and location in the gastrointestinal tract having a critical role for human health. Starch has a multi-scale structure, which undergoes order-disorder transitions during rice cooking, and this structure is a major determinant of its digestibility. The length distributions of amylose and amylopectin chains are important determinants of rice starch gelatinization properties. Starch chain-length and molecular-size distributions are important determinants of nucleation and crystal growth rates, as well as of intra- and intermolecular interactions during retrogradation. A number of first-order kinetics models have been developed to fit starch digestograms, producing new information on the structural basis for starch digestive characteristics of cooked whole rice. Different starch digestible fractions with distinct digestion patterns have been found for the digestion of rice starch in fully gelatinized and retrograded states, the digestion kinetics of which are largely determined by starch fine molecular structures. Current insights and future directions to better understand digestibility of starch in whole cooked rice are summarized, pointing to ways of developing whole rice into a healthier food by way of having slower starch digestibility.

Relationship between starch fine structure and simulated oral processing of cooked japonica rice

Background

Simulated oral processing can be used to evaluate the palatability of cooked rice. Previously, we established a simulated oral processing method using a texture analyzer equipped with a multiple extrusion cell probe (TA/MEC). However, the relationship between oral processing and starch fine structure remains unknown.

Methods

In this study, we analyzed the oral processing properties using TA/MEC and characterized the starch fine structure of japonica rice by size-exclusion chromatography (SEC) and fluorophore-assisted capillary electrophoresis (FACE). The relationship between starch fine structure and oral processing of cooked japonica rice was further investigated.

Results

Cooked rice structure contains fast-breakdown (Type I structure), slow-breakdown (Type II structure) and unbreakable structures (Type III structure). Fast-breakdown and slow-breakdown structure were positively correlated with the content of amylose and shorter amylopectin branches. The content of longer amylopectin branches was positively correlated with the contribution of unbreakable structure.

Conclusion

The results indicated that cooked japonica rice varieties with more amylose and shorter amylopectin branches tend to form a harder texture and need more work to break down the fast and slow breakdown structures related to rice kernel fragmentation. Meanwhile, cooked japonica rice varieties possess stronger molecular entanglements due to their longer amylopectin branches and contribute more to the breakdown of unbreakable structures. These results can guide breeders to select rice varieties with desirable eating qualities for cultivation.

Comparative transcriptome analyses revealed key genes involved in high amylopectin biosynthesis in wheat

High amylopectin starch is an important modified starch for food processing industries. Despite a thorough understanding of starch biosynthesis pathway, the regulatory mechanism responsible for amylopectin biosynthesis is not well explored. The present study utilized transcriptome sequencing approach to understand the molecular basis of high amylopectin content in three high amylopectin mutant wheat lines ('TAC 6', 'TAC 358', and 'TAC 846') along with parent variety 'C 306'. Differential scanning calorimetry (DSC) of high amylopectin starch identified a high thermal transition temperature and scanning electron microscopy (SEM) revealed more spherical starch granules in mutant lines compared to parent variety. A set of 4455 differentially expressed genes (DEGs) were identified at two-fold compared to the parent variety in high amylopectin wheat mutants. At ten-fold, 279 genes, including two starch branching genes (SBEIIa and SBEIIb), were up-regulated and only 30 genes, including the starch debranching enzyme (DBE), were down-regulated. Among the genes, different isoforms of sucrose non-fermenting-1-related protein kinase-1 (TaSnRK1α2-3B and TaSnRK1α2-3D) and its regulatory subunit, sucrose non-fermenting-4 (SNF-4-2A, SNF-4-2B, and SNF-4-5D), were found to be highly up-regulated. Further, expression of the DEGs related to starch biosynthesis pathway and TaSnRK1α2 and SNF-4 was performed using qRT-PCR. High expression of TaSnRK1α2, SNF-4, and SBEII isoforms suggests their probable role in high amylopectin starch biosynthesis in grain endosperm.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-022-03364-3.