Periodate oxidation of 4-O-methylglucuronoxylans: Influence of the reaction conditions

Tuning the mechanical properties of alginate dialdehyde-gelatin (ADA-GEL) bioinks for bioprinting approaches by varying the degree of oxidation

Extrusion-based 3D bioprinting is one of the most promising and widely used technologies in bioprinting. However, the development of bioprintable, biocompatible bioinks with tailored mechanical and biological properties remains a major challenge in this field. Alginate dialdehyde-gelatin (ADA-GEL) hydrogels face these difficulties and enable to tune the mechanical properties depending on the degree of oxidation (% DO) of ADA. Here, we present a holistic approach for characterizing the influence of the % DO on the mechanical properties of ADA-GEL hydrogels under multiple loading modes, compression, tension, and torsional shear in the large-strain regime. We evaluate complex mechanical characteristics including nonlinearity, hysteresis, conditioning, and stress relaxation. We calibrate hyperelastic material models to determine the corresponding material parameters inversely. Our results confirm that decreasing the % DO of ionically crosslinked ADA-GEL hydrogels leads to an increase in stiffness, more distinct nonlinearity, more pronounced hysteresis, and minor preconditioning effects, while the relaxation behavior is slightly affected. The fabrication technique - molding or printing - does only slightly affect the complex mechanical properties and stress relaxation behavior. Ionically and enzymatically dual-crosslinked ADA-GEL hydrogels showed higher stresses during cyclic loading and less viscous effects during stress relaxation in all three loading modes. We conclude that the % DO and the crosslinking procedure are crucial parameters to tune the mechanical behavior of ADA-GEL hydrogels. Careful choice of these parameters might facilitate the fabrication of biomaterials that closely mimic the properties of native tissues for advanced tissue engineering applications.

Developing and Characterizing a Biocompatible Hydrogel Obtained by Cross-Linking Gelatin with Oxidized Sodium Alginate for Potential Biomedical Applications

The main goal of this research was to create biocompatible hydrogels using gelatin and a double cross-linking technique involving both covalent and ionic bonds to immobilize propolis. The covalent bonds were formed through Schiff base cross-links between protein-free amino groups (NH2) from the lysine residue and aldehyde groups (CHO) produced by oxidizing sodium alginate with NaIO4, while the ionic bonds were achieved using Mg2+ ions. Hydrogel films were obtained by varying the molar ratios of -CHO/-NH2 under different pH conditions (3.5 and 5.5). The presence of aldehyde groups in the oxidized sodium alginate (OSA) was confirmed using FTIR and NMR spectroscopy. The oxidation degree was monitored over 48 h, and the influence of temperature was examined. Results showed that higher -CHO/-NH2 molar ratios led to increased conversion index values of NH2 groups, and a decrease in swelling degree values was observed in mediums with pH values of 5.5 and 7.4. The encapsulation and release efficiency of propolis decreased with an increase in the hydrogel cross-linking degree. UV irradiation enhanced the antioxidant activity of both free and encapsulated propolis. These findings offer valuable insights for the biomedical and pharmaceutical fields into designing biocompatible hydrogels for propolis immobilization, with potential for controlled release.

Oxidized Bacterial Cellulose Membranes Immobilized with Papain for Dressing Applications: Physicochemical and In Vitro Biological Properties

This research consolidates our group's advances in developing a therapeutic dressing with innovative enzymatic debridement, focusing on the physicochemical and in vitro biological properties of papain immobilized in wet oxidized bacterial cellulose (OxBC-Papain) dressing. OxBC membranes were produced with Komagataeibacter hansenii oxidized with NaIO4, and papain was immobilized on them. They were characterized in terms of enzyme stability (over 100 days), absorption capacity, water vapor transmission (WVT), hemocompatibility, cytotoxicity, and cell adhesion. The OxBC-Papain membrane showed 68.5% proteolytic activity after 100 days, demonstrating the benefit of using the OxBC wet membrane for papain stability. It had a WVT rate of 678 g/m2·24 h and cell viability of 99% and 86% for L929 and HaCat cells, respectively. The membranes exhibited non-hemolytic behavior and maintained 26% clotting capacity after 1 h. The wet OxBC-Papain membrane shows significant potential as a natural biomolecule-based therapeutic dressing for wound care, offering efficient debridement, moisture maintenance, exudate absorption, gas exchange, and hemostasis without cytotoxic effects or cell adhesion to the dressing. Further research, especially using in vivo models, is needed to assess its efficacy in inducing epithelialization. This study advances stomatherapy knowledge, providing a cost-effective solution for enzymatic debridement in healthcare.

Antioxidant isolation and characterization from the plant Tradescantia spathacea Sw. of the Commelinaceae family

A novel bioactive flavan glycoside was isolated by solvent extraction method with the help of Soxhlet apparatus from the methanolic extract of Tradescantia spathacea Sw. Flavan glycoside having molecular formula C20H22O10, melting point 175-1780C, molecular weight by ESI-MS m/z (M + H]+ 423, optical rotation was[α]21D-45.1(c 0.20 methanol). Its structure was determined (-)-epicatechin 7-O-alpha-L-arabinopyranoside. Various color reactions, chemical degradation (like acid hydrolysis, permethylation, and enzymatic hydrolysis), UV-Visible spectrophotometry, Fourier transforms infrared spectroscopy, electrospray ionization mass spectrometry, and nuclear magnetic resonance spectroscopy were used to establish the structure of compound (-)-(-)-epicatechin 7-O-alpha-L-arabinopyranoside.. A flavan glycoside was also tested with a DPPH assay method for antioxidant activity by using Ascorbic acid as standard. DPPH radical scavenging test data demonstrate that a flavan glycoside possesses potent antioxidant activity so this flavan glycoside can be utilized as a potent antioxidant agent.

Antibacterial Compound Isolation and Characterization from the Plant Cynotis axillaris Schult

A novel flavone glycoside was isolated from the methanolic extract of Cynotis axillaris Schult. Various analysis and characterization techniques were used to determine its structure and properties. The compound exhibited a melting point range of 231-232 °C and had a molecular formula of C27 H30 O14 . Several spectral characterization techniques were employed to establish the isolated compound's structure. These included UV-visible spectroscopy, FT-IR, LC-ESI-MS, and NMR spectroscopy. Based on these analyses, the structure of the isolated compound was determined to be 5,7,4'-trihydroxyflavone-8-α-L-rhamnopyranoside-4'-O-β-D-galactopyranosyl. This structure indicates that it is a flavone glycoside consisting of a flavone (5,7,4'-trihydroxyflavone) moiety attached to a sugar molecule (galactopyranosyl) at position 4', which further bears a rhamnose group at position 8 of the flavone. In addition, to the structural characterization, the compound also demonstrated significant antibacterial efficacy against various bacterial pathogens, including Gram-positive bacteria such as Bacillus subtilis MTCC441 and Gram-negative bacteria such as Escherichia coli MTCC1098, Proteus vulgarize MTCC426, and Salmonella Typhimurium MTCC3224. The antimicrobial activity was evaluated by measuring the zone of inhibition in millimetres, which provides an indication of the compound's ability to inhibit bacterial growth. The study successfully identified and characterized a novel flavone glycoside from Cynotis axillaris Schult. and its antimicrobial activity.

Modification of xylan via an oxidation-reduction reaction

Xylan is a biopolymer readily available from forest resources. Various modification methods, including oxidation with sodium periodate, have been shown to facilitate the engineering applications of xylan. However, modification procedures are often optimized for semicrystalline high molecular weight polysaccharide cellulose rather than for lower molecular weight and amorphous polysaccharide xylan. This paper elucidates the procedure for the periodate oxidation of xylan into dialdehyde xylan and its further reduction into a dialcohol form and is focused on the modification work up. The oxidation-reduction reaction decreased the molecular weight of xylan while increased the dispersity more than 50%. Unlike the unmodified xylan, all the modified grades could be solubilized in water, which we see essential for facilitating the future engineering applications of xylan. The selection of quenching and purification procedures and pH-adjustment of the reduction step had no significant effect on the degree of oxidation, molecular weight and only a minor effect on the hydrodynamic radius in water. Hence, it is possible to choose the simplest oxidation-reduction route without time consuming purification steps within the sequence.

Constructing a Novel Xylan-Based Film with Flexibility, Transparency, and High Strength

Xylan-based films have great potential to replace petroleum-based polymers used for packaging and coatings due to their excellent biocompatibility, biodegradability, and good gas barrier properties. However, fabricating a xylan-based film with flexible, transparent, water-proof, and excellent mechanical properties is an enormous challenge. Herein, we manufactured a series of degradable films with adjustable properties via solution-casting using a water-soluble xylan derivative. This is the first report of a pure xylan-based film with high performance, requiring no additives. The tensile strength of the xylan-based film could be controlled by adjusting the aldehyde content, which varied from 105.0 to 132.6 MPa. The smallest initial water contact angle of the xylan-based films is 93.26°, indicating that these films are hydrophobic. This work shows a simple and viable route toward manufacturing xylan-based films with high tensile strength, flexibility, and transparency, which can be used for packaging materials and coatings.

Molecular modification, structural characterization, and biological activity of xylans

The differences in the source and structure of xylans make them have various biological activities. However, due to their inherent structural limitations, the various biological activities of xylans are far lower than those of commercial drugs. Currently, several types of molecular modification methods have been developed to address these limitations, and many derivatives with specific biological activity have been obtained. Further research on structural characteristics, structure-activity relationship and mechanism of action is of great significance for the development of xylan derivatives. Therefore, the major molecular modification methods of xylans are introduced in this paper, and the primary structure and conformation characteristics of xylans and their derivatives are summarized. In addition, the biological activity and structure-activity relationship of the modified xylans are also discussed.

Review: Periodate oxidation of wood polysaccharides-Modulation of hierarchies

Periodate oxidation of polysaccharides has transitioned from structural analysis into a modification method for engineered materials. This review summarizes the research on this topic. Fibers, fibrils, crystals, and molecules originating from forests that have been subjected to periodate oxidation can be crosslinked with other entities via the generated aldehyde functionality, that can also be oxidized or reduced to carboxyl or alcohol functionality or used as a starting point for further modification. Periodate-oxidized materials can be subjected to thermal transitions that differ from the native cellulose. Oxidation of polysaccharides originating from forests often features oxidation of structures rather than liberated molecules. This leads to changes in macro, micro, and supramolecular assemblies and consequently to alterations in physical properties. This review focuses on these aspects of the modulation of structural hierarchies due to periodate oxidation.

Bioengineered Hybrid Collagen Scaffold Tethered with Silver-Catechin Nanocomposite Modulates Angiogenesis and TGF-β Toward Scarless Healing in Chronic Deep Second Degree Infected Burns

Management of burn wounds with diabetes and microbial infection is challenging in tissue engineering. The delayed wound healing further leads to scar formation in severe burn injury. Herein, a silver-catechin nanocomposite tethered collagen scaffold with angiogenic and antibacterial properties is developed to enable scarless healing in chronic wounds infected with Pseudomonas aeruginosa under diabetic conditions. Histological observations of the granulation tissues collected from an experimental rat model show characteristic structural organizations similar to normal skin, whereas the open wound and pristine collagen scaffold treated animals display elevated dermis with thick epidermal layer and lack of appendages. Epidermal thickness of the hybrid scaffold treated diabetic animals is lowered to 33 ± 2 µm compared to 90 ± 2 µm for pristine collagen scaffold treated groups. Further, the scar elevation index of 1.3 ± 0.1 estimated for the bioengineered scaffold treated diabetic animals is closer to the normal skin. Immunohistochemical analyses provide compelling evidence for the enhanced angiogenesis as well as downregulated transforming growth factor- β1 (TGF-β1) and upregulated TGF-β3 expressions in the hybrid scaffold treated animal groups. The insights from this study endorse the bioengineered collagen scaffolds for applications in tissue regeneration without scar in chronic burn wounds.

Modular synthesis of non-charged and ionic xylan carbamate derivatives from xylan carbonates

Novel non-charged and ionic xylan carbamate (XC) derivatives were synthesized in a modular approach from xylan phenyl carbonates (XPC) as reactive intermediates. XPC with varying degrees of substitution (DS) from 0.5 to 1.9 were converted with different non-ionic primary and secondary amines in different molar ratio to obtain the corresponding XC with high conversion rates of up to 100%. In a similar way, ionic amines were employed for the aminolysis of XPC to obtain charged XC. The XC were characterized by NMR- and infrared spectroscopy. XPC proofed to be highly versatile building blocks for the preparation of ionic xylan derivatives. The type and amount of charged groups could be tuned efficiently. Moreover, high DS values of up to 1.4 for cationic and 1.8 for anionic XC derivatives could be achieved, which is higher than reported previously for comparable ionic xylan derivatives that were prepared by "conventional" esterification and etherification reactions.

Development of High-Capacity Periodate Battery with Three-Dimensional-Printed Casing Accommodating Replaceable Flexible Electrodes

We present the development of a novel battery comprising iron(III) periodate complex cathode and zinc anode. The periodate complex [H₇Fe₄(IO₄)₃O₈] was prepared by a precipitation reaction between Fe(NO₃)₃ and NaIO₄ and was used in battery development for the first time. The periodate complex along with 14% carbon nanotubes and a polytetrafluoroethylene coating formed a stable flexible electrode, and the battery showed specific capacity as high as 300 mA h g^-1. Compared to single-electron processes in conventional cathode reactions, the possibility to significantly enhancing the cathode specific capacity via a multielectron process associated with valence change from I(VII) to I₂ is demonstrated. A novel three-dimensional printed reserve battery design comprising replaceable electrodes and acetic acid electrolyte is also presented.

Synthesis and Characterization of Periodate-Oxidized Polysaccharides: Dialdehyde Xylan (DAX)

The cleavage of the C2-C3 bond in the building units of 1 → 4-linked polysaccharides by periodate formally results in two aldehyde units, which are present in several masked forms. The structural elucidation of such polysaccharide dialdehydes remains a big challenge. Since polysaccharide derivatives are increasingly applied in materials technology, unveiling the exact structure is of utmost importance. To address this issue for xylan, dialdehyde xylan (DAX, oxidation degree of 91.5%) has been synthesized as water-soluble polymer. The ATR-FTIR spectrum of DAX showed free aldehyde to be absent and exhibited a characteristic absorption at 858 cm(-1) related to hemiacetal groups. By a combination of 1D and 2D NMR techniques, it was confirmed that oxidized xylan is present as poly(2,6-dihydroxy-3-methoxy-5-methyl-3,5-diyl-1,4-dioxane). Based on GPC analysis, the DAX polymer shows a slightly lower molar mass (6.6 kDa) compared to the starting material (7.7 kDa) right after oxidation, and degraded further after one month of storage in 0.1 M NaCl solution (4.3 kDa). The oxidized xylan demonstrated lower thermal stability upon TGA analysis and a greater amount of residual char (20.6%) compared to the unmodified xylan (13.7%).