Optimization, purification and structural characterization of a dextran produced by L. mesenteroides isolated from Chinese sauerkraut

Fermentative optimization and characterization of exopolysaccharides from Enterococcus faecium F58 isolated from traditional fresh goat cheese

This study focused on optimizing the fermentation-based production of Exopolysaccharides (EPS) from Enterococcus faecium F58 initially isolated from traditional Moroccan Jben, a fresh goat cheese. Using the central composite design, yeast extract, MnSO4, and time affect EPS concentration. The highest experimental and predicted EPS production yields were 2.46 g/L ± 0.38 and 2.86 g/L, respectively. Optimal concentrations of yeast extract (4.46 g/L) and MnSO4 (0.011 g/L) were identified after 26 h at 30 °C. Characterization of EPS was conducted using SEM with EDX, XRD, and FTIR analyses. These tests revealed a specific morphology and an amorphous structure. Additionally, thermogravimetric analysis indicated adequate EPS stability up to 200 °C with anti-adhesion properties against different pathogens. This study offers valuable insights into the optimized production of EPS from Enterococcus faecium F58, which exhibits significant structural and functional properties for various applications in the food and biotechnology industries.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-023-01424-9.

Effect of exopolysaccharides yield and addition concentration of Lactobacillus helveticus on the processing characteristics of fermented milk and its mechanism

Exopolysaccharides (EPS) yield and added concentration of lactic acid bacteria can greatly affect the processing characteristics of fermented milk. In order to investigate the effects and mechanisms of EPS yield and added concentration on fermented milk, researchers extracted EPS from 50 strains of Lactobacillus helvedicus (L. helvedicus) and selected the two strains with the largest difference in EPS yield (L. helvedicus LH18 and L. helvetigus LH33) for subsequent experiments. The physicochemical properties of EPS-LH18 and EPS-LH33 were analyzed. The gel characteristics and protein conformation of fermented milk were studied by means of texture analyzer, rheometer, scanning electron microscopy, nuclear magnetic resonance machine, fluorescence spectrophotometer and circular dichroism. The results indicate that the monosaccharide compositions of EPS-LH18 and EPS-LH33 are the same and have good thermal stability. The texture and rheological properties of L. helveticus LH18 fermented milk are significantly superior to other fermented milk. The reason is that L. helveticus LH18 EPS has the highest yield, which leads to a denser gel structure, lower surface hydrophobicity and free sulfhydryl content of its fermented milk. According to circular dichroism analysis, β- sheet and random coil are the internal factors leading to the difference in fermented milk gel. In addition, the fermented milk improved even more favorably as the concentration of the two EPS additions increased. As described above, L. helveticus LH18 has the potential to be an excellent yogurt starter, and both of the above EPS can be used as probiotic stabilizer alternatives for fermented dairy products.

Exopolysaccharides of lactic acid bacteria: Structure, biological activity, structure-activity relationship, and application in the food industry: A review

Over the past few decades, researchers have discovered that probiotics play an important role in our daily lives. With the further deepening of research, more and more evidence show that bacterial metabolites have an important role in food and human health, which opens up a new direction for the research of lactic acid bacteria (LAB) in the food and pharmaceutical industry. Many LAB have been widely studied because of the ability of exopolysaccharides (EPS). Lactic acid bacteria exopolysaccharides (LAB EPS) not only have great potential in the treatment of human diseases but also can become natural ingredients in the food industry to provide special qualitative structure and flavor. This paper has organized and summarized the biosynthesis, strain selection, production process parameters, structure, and biological activity of LAB EPS, filling in the monotony and incompleteness of previous articles' descriptions of LAB EPS. Therefore, this paper focuses on the general biosynthetic pathway, structural characterization, structure-activity relationship, biological activity of LAB EPS, and their application in the food industry, which will help to deepen people's understanding of LAB EPS and develop new active drugs from LAB EPS. Although the research results are relatively affluent, the low yield, complex structure, and few clinical trials of EPS are still the reasons that hinder its development. Therefore, future knowledge expansion should focus on the regulation of structure, physicochemical properties, function, higher production of EPS, and clinical trial applications, which can further increase the commercial significance and value of EPS. Furthermore, better understanding the structure-function relationship of EPS in food remains a challenge to date.

Glucans with Different Degrees of Polymerization from Leuconostoc mesenteroides CICC6055: Analysis of Physicochemical Properties and Intestinal Prebiotic Function

This study explored the physicochemical properties and prebiotic activities of glucans and oligoglucans. Oligoglucans were obtained through the fermentation of Leuconostoc mesenteroides CICC6055 and the glucansucrase of strain CICC6055, while glucans were obtained only through fermentation. Thin-layer chromatography and high-performance liquid chromatography identified enzymatically synthesized oligoglucans with a higher yield. Differential scanning calorimetry and derivative thermogravimetry analyses revealed the heat resistance of the glucans and oligoglucans at 280-300 °C. Fourier transform-infrared spectroscopy and nuclear magnetic resonance analyses demonstrated that their main chains were linked with α-1,6-glycosidic bonds accompanied by glucose residue branching. In vitro fermentation experiments demonstrated that they not only improved the contents of short-chain fatty acids but also raised the abundance of predominant flora, such as Bacteroides, Firmicutes, Verrucomicrobia, and Proteobacteria. These results implicate glucansucrase as an efficacious tool for the enzyme synthesis of oligoglucans. Furthermore, both polysaccharides with different degrees of polymerization may be beneficial in maintaining a healthy human gut.

Structural Characterization and Immunomodulatory Activity of a Mannose-Rich Polysaccharide Isolated from Bifidobacterium breve H4-2

In this study, a novel homogeneous mannose-rich polysaccharide named EPS-1 from the fermentation broth of Bifidobacterium breve H4-2 was isolated and purified by anion exchange column chromatography and gel column chromatography. The primary structure of EPS-1 was analyzed by high-performance liquid chromatography, Fourier-transform infrared spectroscopy, gas chromatography-mass spectrometry, and nuclear magnetic resonance. The results indicated that EPS-1 had typical functional groups of polysaccharides. EPS-1 with an average molecular weight of 3.99 × 104 Da was mainly composed of mannose (89.65%) and glucose (5.84%). The backbone of EPS-1 was →2,6)-α-d-Manp-(1→2)-α-d-Manp-(1→2,6)-α-d-Manp-(1→2)-α-d-Manp-(1→2,6)-α-d-Manp-(1→6)-α-d-Glcp-(1→ simultaneously containing two kinds of branched chains (α-d-Manp-(1→3)-α-d-Manp-(1→ and α-d-Manp-(1→). Besides, EPS-1 had a triple-helical conformation and exhibited excellent thermal stability. Moreover, the immunomodulatory activity of EPS-1 was evaluated by RAW 264.7 cells. Results indicated that EPS-1 significantly enhanced the viability of RAW 264.7 cells. EPS-1 could also be recognized by toll-like receptor 4, thereby activating the nuclear factors-κB (NF-κB) signaling pathway, promoting phosphorylation of related nuclear transcription factors, improving cell phagocytic activity, and promoting the secretion of NO, IL-6, IL-1β, and TNF-α. Thus, EPS-1 could activate the TLR4-NF-κB signaling pathway to emerge immunomodulatory activity on macrophages. The above results indicate that EPS-1 can serve as a potential immune-stimulating polysaccharide.

Evaluation of antioxidation, regulation of glycolipid metabolism and potential as food additives of exopolysaccharide from Sporidiobolus pararoseus PFY-Z1

At present, there are relatively few studies on the production of exopolysaccharide (EPS) by yeasts. Therefore, exploring the properties of EPS produced by yeast can not only enrich the source of EPS, but also play an important role in its future application in the food field. The aim of this study was to explore the biological activities of EPS (named SPZ) from Sporidiobolus pararoseus PFY-Z1, as well as the dynamic changes in physical and chemical properties that occur during simulated gastrointestinal digestion, and the effects of SPZ on microbial metabolites during fecal fermentation in vitro. The results revealed that SPZ had good water solubility index, water-holding capacity, emulsifying ability, coagulated skim milk, antioxidant properties, hypoglycemic activities, and bile acid-binding abilities. Furthermore, the content of reducing sugars increased from 1.20 ± 0.03 to 3.34 ± 0.11 mg/mL after gastrointestinal digestion, and had little effect on antioxidant activities. Moreover, SPZ could promote the production of short-chain fatty acids during fermentation for 48 h, in particular, propionic acid and n-butyric acid increased to 1.89 ± 0.08 and 0.82 ± 0.04 mmol/L, respectively. Besides this, SPZ could inhibit LPS production. In general, this study can help us to better understand the potential bioactivities, and the changes in bio-activities of compounds after digestion of SPZ.

Structural characterization of exopolysaccharide from Leuconostoc mesenteroides P35 and its binding interaction with bovine serum albumin using surface plasmon resonance biosensor

This paper describes the structural elucidation of Leuconostoc mesenteroides P35 exopolysaccharide (EPS-LM). Ln. mesenteroides P35 strain was isolated from a French goat cheese for its capacity to produce EPS increasing the viscosity of a whey-based fermentation medium. The chemical structure of EPS-LM analysis was elucidated by determination of optical rotation degree, macromolecular characterization, sugar units and methylation analyses, FT-IR, 1D NMR spectroscopy (1H and 13C NMR), 2D NMR spectroscopy (1H1H COSY, HSQC and HMBC). EPS-LM was a high molecular weight (ranging from 6.7 × 106 Da to 9.9 × 106 Da) dextran that is composed of only d-glucose units containing α (1 → 6) linkages and paltry α (1 → 3) branches. Since polysaccharide-protein interactions can be exploited to control and design food matrices, EPS-LM interactions with bovine serum albumin (the main constituent of bovine plasma) were investigated by surface plasmon resonance (SPR). Kinetic properties of EPS-LM binding with immobilized BSA via showed an increase of EPS-LM affinity (equilibrium constant (Kd)) for BSA from (2.50 ± 0.01) × 10-5 M-1 at 298 K to (9.21 ± 0.05) × 10-6 M-1 at to 310 K. The thermodynamic parameters revealed that van der Waals and hydrogen binding forces play a major role in the interaction of EPS-LM with BSA. However, EPS-LM-BSA interaction was non-spontaneous, entropy driven and an EPS-LM - BSA binding process was endothermic (ΔG > 0). The structural findings suggested that Ln. mesenteroides P35 α-D-glucan might find widespread technological applications in the biopolymer, medical and food industries.

The effects of ultrasound on probiotic functionality: an updated review

The effects of ultrasound (US) on probiotics, as health-promoting microbes, have attracted the attention of researchers in fermentation and healthy food production. This paper aims to review recent advances in the application of the US for enhancing probiotic cells' activity, elaborate on the mechanisms involved, explain how probiotic-related industries can benefit from this emerging food processing technology, and discuss the perspective of this innovative approach. Data showed that US could enhance fermentation, which is increasingly used to enrich agri-food products with probiotics. Among the probiotics, recent studies focused on Lactiplantibacillus plantarum, Lactobacillus brevis, Lactococcus lactis, Lactobacillus casei, Leuconostoc mesenteroides, Bifidobacteria. These bacteria proliferated in the log phase when treated with US at relatively low-intensities. Also, this non-thermal technology increased extracellular enzymes, mainly β-galactosidase, and effectively extracted antioxidants and bioactive compounds such as phenolics, flavonoids, and anthocyanins. Accordingly, better functional and physicochemical properties of prebiotic-based foods (e.g., fermented dairy products) can be expected after ultrasonication at appropriate conditions. Besides, the US improved fermentation efficiency by reducing the production time, making probiotics more viable with lower lactose content, more oligosaccharide, and reduced unpleasant taste. Also, US can enhance the rheological characteristics of probiotic-based food by altering the acidity. Optimizing US settings is suggested to preserve probiotics viability to achieve high-quality food production and contribute to food nutrition improvement and sustainable food manufacturing.

Purification of exopolysaccharides from Lactobacillus rhamnosus and changes in their characteristics by regulating quorum sensing genes via polyphenols

To explore the effect of Lonicera caerulea fruit polyphenols (LCP) on caries-causing bacteria, strain RYX-01 with high production of biofilm and exopolysaccharides (EPS) was isolated from the oral cavity of caries patients and was identified as Lactobacillus rhamnosus by 16S rDNA analysis and morphology. The characteristics of EPS produced by RYX-01 (EPS-CK) and those produced by adding L. caerulea fruit polyphenols (EPS-LCP) were compared to reveal whether LCP reduced the cariogenicity of RYX-01 by influencing the structure and composition of EPS. The results showed that LCP could increase the content of galactose in EPS and destroy the original aggregation state of EPS-CK but had no significant effect on the molecular weight and functional group composition of EPS (p > 0.05). At the same time, LCP could inhibit the growth of RYX-01, reduce EPS and biofilm formation and inhibit the expression of quorum sensing (QS, luxS)- and biofilm formation (wzb)-related genes. Therefore, LCP could change the surface morphology, content and composition of RYX-01 EPS and reduce the cariogenic effect of EPS and biofilm. In conclusion, LCP can be used as a potential plaque biofilm inhibitor and QS inhibitor in drugs and functional foods.

Structural characterization and partial properties of dextran produced by Leuconostoc mesenteroides RSG7 from pepino

Exopolysaccharides (EPSs) produced by lactic acid bacteria possess various bioactivities and potential attractions for scientific exploration and commercial development. An EPS-producing bacterial strain, RSG7, was previously isolated from the pepino and identified as Leuconostoc mesenteroides. Based on the analyses of high-performance size exclusion chromatography, high-performance ion chromatography, Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, and methylation, the RSG7 EPS was identified as a dextran with a molecular weight of 5.47 × 10⁶ Da and consisted of α-(1→6) glycosidic linkages as backbone and α-(1→2), α-(1→3), α-(1→4), and α-(1→6) glycosidic linkages as side chains. Scanning electron microscopy observed a honeycomb-like porous structure of RSG7 dextran, and this dextran formed aggregations with irregular hill-shaped lumps according to atomic force microscopy analysis. Physical-chemical investigations suggested that RSG7 dextran possessed excellent viscosity at high concentration, low temperature, and high pH; showed a superior emulsifying capacity of tested vegetable oils than that of hydrocarbons; and owned the maximal flocculating activity (10.74 ± 0.23) and flocculating rate (93.46 ± 0.07%) in the suspended solid of activated carbon. In addition, the dextran could coagulate sucrose-supplemented milk and implied potential probiotics in vitro. Together, these results collectively describe a valuable dextran with unique characteristics for exploitation in food applications.

Characterization of Dextran Biosynthesized by Glucansucrase from Leuconostoc pseudomesenteroides and Their Potential Biotechnological Applications

Glucansucrase was purified from Leuconostoc pseudomesenteroides. The glucansucrase exhibited maximum activity at pH 5.5 and 30 °C. Ca²⁺ significantly promoted enzyme activity. An exopolysaccharide (EPS) was synthesized by this glucansucrase in vitro and purified. The molecular weight of the EPS was 3.083 × 10⁶ Da. Fourier transform infrared (FT-IR) and nuclear magnetic resonance (NMR) spectroscopy showed that the main structure of glucan was 97.3% α-(1→6)-linked D-glucopyranose units, and α-(1→3) branched chain accounted for 2.7%. Scanning electron microscopy (SEM) observation of dextran showed that its surface was smooth and flaky. Atomic force microscopy (AFM) of dextran revealed a chain-like microstructure with many irregular protuberances in aqueous solution. The results showed that dextran had good thermal stability, water holding capacity, water solubility and emulsifying ability (EA), as well as good antioxidant activity; thus it has broad prospects for development in the fields of food, biomedicine, and medicine.

Conventional optimization and characterization of microbial dextran using treated sugarcane molasses

This study focuses the comparison on yield of microbial dextran using treated sugarcane molasses (SCM) as a feed stock from different treatment methods. The suitable method for treatment of SCM was identified on the basis of microbial dextran production. The different factors namely the concentrations of total sugars, nitrogen sources, inoculum size, shaking speed, initial medium pH, and phosphate sources influencing the production of microbial dextran were studied. The maximum yield of dextran was obtained to be 17.18 ± 0.08 g L^-1 using the conventional optimization. The structural analysis of produced dextran from SCM with various treatment techniques was compared using Fourier-transform infra-red analysis and nuclear magnetic resonance spectroscopy. Later, the rheological behavior of produced microbial dextran was examined and found to be a non-Newtonian. To the best of our knowledge, the comparison on the production of microbial dextran through fermentation using SCM with various treatment strategies has not been performed yet.

Statistical Optimization of Novel Medium to Maximize the Yield of Exopolysaccharide From Lacticaseibacillus rhamnosus ZFM216 and Its Immunomodulatory Activity

The traditional media used for the fermentation of Lactobacilli always contain carbohydrate polymers, which interfere with the analysis of the exopolysaccharide (EPS) produced by the bacteria. In this investigation, a novel medium formulation that could avoid such interference was successfully developed. The beef extract, yeast extract, and peptone used in this formulation were subjected to the removal of polysaccharides before use. The factors affecting the EPS production were optimized by a single factor test, Plackett–Burman design, and Box–Behnken design. The optimum formula was ascertained as: 7.5 g L–1 yeast extract, 12.5 g L–1 beef extract, 10 g L–1 peptone, 21.23 g L–1 maltose, 5.51 g L–1 yeast nitrogen base, 2 g L–1 K2HPO4, 5 g L–1 anhydrous sodium acetate, 2 g L–1 ammonium citrate, 0.58 g L–1 MgSO4⋅7H2O, 0.25 g L–1 MnSO4⋅H2O, and 1 mL L–1 Tween 80. The initial pH of the medium was 6.5. The optimized conditions for fermentation of the strain to produce EPS were as follows: seed size 1%, culture temperature 37°C, and culture time 20 h. Optimum results showed that EPS yield was 496.64 ± 3.15 mg L–1, being 76.70% higher than that of unoptimized conditions (281.07 ± 5.90 mg L–1). The EPS was mainly comprised of glucose and guluronic acid, with a weight average molecular weight of 19.9 kDa; it was also characterized by Fourier transform infrared spectroscopy and UV analysis. EPS was found to significantly enhance the phagocytic capacity, promote the NO, TNF-α, IL-1β, and IL-6 secretion, and improve mRNA expression of cytokines in RAW 264.7 macrophages, indicating its considerable immunomodulatory activity. Western bolt and immunofluorescence results demonstrated that the EPS was able to increase p65 nuclear translocation in the macrophages, indicating that EPS enhanced immunity via the NF-κB signaling pathway. EPS investigated in this work has potential as an attractive functional food supplement candidate for the hypoimmunity population.

Structural Characterization of Exopolysaccharide Produced by Leuconostoccitreum B-2 Cultured in Molasses Medium and Its Application in Set Yogurt

Sugarcane molasses is an agricultural by-product containing sucrose. In this study, the exopolysaccharide (M-EPS) produced by Leuconostoc citreum B-2 in molasses-based medium was characterized, optimized, and its application in set yogurt was investigated. The structure analysis, including gel permeation chromatography, Fourier transform infrared spectroscopy, and nuclear magnetic resonance, revealed that the M-EPS was a linear dextran composed of D-glucose units, which were linked by α-(1→6) glycosidic bonds with 19.3% α-(1→3) branches. The M-EPS showed a lower molecular weight than that produced from sucrose. The M-EPS was added into the set yogurt, and then the water holding capacity, pH, and microstructure of set yogurt were evaluated. Compared with the controls, the addition of M-EPS improved the water holding capacity and reduced the pH of set yogurt. Meanwhile, the structure of the three-dimensional network was also observed in the set yogurt containing M-EPS, indicating that M-EPS had a positive effect on the stability of set yogurt. The results provide a theoretical basis for the cost-effective utilization of sugarcane molasses.

Analysis of the structure and properties of dextran produced by Weissella confusa

An EPS produced by Weissella confusa H2 was purified through Sephadex G-100, and the preliminary structure characteristics and biological activities of H2 EPS were analyzed. Molecular mass of purified H2 EPS was 2.705 × 10⁶ Da as measured with gel permeation chromatography (GPC). Composition of monosaccharides, nuclear magnetic resonance (NMR) spectroscopy spectroscopy and fourier transform infrared (FT-IR) showed that the EPS was a linear homopolysaccharide, mainly constituted of glucose and it is suggested that the EPS was dextran with α-(1 → 6) glycosidic bonds and a few α-(1 → 3) branches. Atomic force micrograph (AFM) and scanning electron microscopy (SEM) analysis of dextran further revealed sheets branched microstructure anchored with many irregular protuberances in aqueous solution. The XRD pattern reflected non-crystalline amorphous nature. In addition, the solubility, water-holding capacity, thermal property, rheological property and heavy metal chelating activity of the purified H2 dextran were determined. The dissolution percentage and water holding capacity of the dextran were 98.78 ± 1.37% and 426.03 ± 7.26%, respectively. The dextran exhibited good hydrophilicity, thermal stability and heavy metal chelating activity. Rheological studies exhibited rotational speed, pH, temperature, metal ions solutions dependent semiviscous nature. These results support its use as an additive in the food and environmental protection fields.

Structural characterization of a novel polysaccharide from sweet corncob that inhibits glycosylase in STZ-induced diabetic rats : Structural characterization of a novel polysaccharide

In the current study, we extracted a polysaccharide from sweet corncob and evaluated its hypoglycemic function. After collection in water, alcohol precipitation, and purification by DEAE-52 and Sephadex G-100 columns, we obtained a polysaccharide (SCP50) that was composed primarily of mannose and glucose (9.73:190.27), with a molecular weight of 9280.33 Da. We demonstrated that SCP50 exhibited significant inhibition of α-glucosidase activity, with an IC50 of 4.866 mg/mL, K_m of 1.297 × 10^-3, and V_max of 0.076 mol/L·min^-1 in vitro. We also observed that SCP50 markedly attenuated disaccharidase (maltase, sucrase, and lactase) activity in a rat model of T2DM. We conclude that SCP50 exerts a hypoglycemic effect via inhibition of intestinal glycosylase. These results thus provide new insight into the hypoglycemic action underlying sweet corncob polysaccharide's effects.

Exopolysaccharides synthesized by lactic acid bacteria: biosynthesis pathway, structure-function relationship, structural modification and applicability

Probiotics and their fermentation products are increasingly been focused on due to their health-boosting effects. Exopolysaccharides (EPS) synthetized by lactic acid bacteria (LAB) are widely applied as texture modifiers in dairy, meat and bakery products owning to their improved properties. Moreover, LAB-derived EPS have been confirmed to possess diverse physiological bioactivities including antioxidant, anti-biofilm, antiviral, immune-regulatory or antitumor. However, the low production and high acquisition cost hinder their development. Even though LAB-derived EPS have been extensively studied for their production-improving, there are only few reports on the systematic elucidation and summary of the relationship among biosynthesis pathway, strain selection, production parameter, structure-function relationship. Therefore, a detailed summary on biosynthesis pathway, production parameter and structure-function relationship of LAB-derived EPS is provided in this review, the structural modifications together with the current and potential applications are also discussed in this paper.

Variability of Bacterial Homopolysaccharide Production and Properties during Food Processing

Various homopolysaccharides (HoPSs) can be produced by bacteria: α- and β-glucans, β-fructans and α-galactans, which are polymers of glucose, fructose and galactose, respectively. The synthesis of these compounds is catalyzed by glycosyltransferases (glycansucrases), which are able to transfer the monosaccharides in a specific substrate to the medium, which results in the growth of polysaccharide chains. The range of HoPS sizes is very large, from 10⁴ to 10⁹ Da, and mostly depends on the carbon source in the medium and the catalyzing enzyme. However, factors such as nitrogen nutrients, pH, water activity, temperature and duration of bacterial culture also impact the size and yield of production. The sequence of the enzyme influences the structure of the HoPS, by modulating the type of linkage between monomers, both for the linear chain and for the ramifications. HoPSs' size and structure have an effect on rheological properties of some foods by their influence on viscosity index. As a consequence, the control of structural and environmental factors opens ways to guide the production of specific HoPS in foods by bacteria, either by in situ or ex situ production, but requires a better knowledge of HoPS production conditions.

The response surface optimization of exopolysaccharide produced by Saccharomyces cerevisiae Y3 and its partial characterization

Response surface methodology (RSM) was used to optimize the conditions of exopolysaccharides (EPSs) by Saccharomyces cerevisiae Y3. The results indicated that the yield of EPS reached 4.52 ± 0.14 g/L with 10.30% (w/v) sucrose, 0.64% (w/v) yeast extract, liquid volume 141.5 mL, which was 2.40 times the original EPS yield. Y3 EPS contained 83.65 ± 0.16% of total sugars, 15.27 ± 0.26% of uronic acid, 0.78 ± 0.02% of protein and 0.30 ± 0.12% of sulfuric acid groups. Y3 EPS maintained a relatively low viscosity, with intrinsic viscosities of 306.58 mL/g (25 °C) and 200.91 mL/g (35 °C), respectively. The EPS had high water solubility index (WSI), high water holding capacity (WHC) and good emulsifying ability (EA). Meanwhile, the EPS could absorb metal ions such as Cu²⁺, Fe²⁺ and Zn²⁺. In addition, Y3 EPS exhibited good antioxidant properties and coagulated skim milk with a concentration-dependent manner. These results indicated that S. cerevisiae Y3 EPS had applicable prospects in medicine, food, especially the dairy industry.

Some Important Metabolites Produced by Lactic Acid Bacteria Originated from Kimchi

Lactic acid bacteria (LAB) have been used for various food fermentations for thousands of years. Recently, LAB are receiving increased attention due to their great potential as probiotics for man and animals, and also as cell factories for producing enzymes, antibodies, vitamins, exopolysaccharides, and various feedstocks. LAB are safe organisms with GRAS (generally recognized as safe) status and possess relatively simple metabolic pathways easily subjected to modifications. However, relatively few studies have been carried out on LAB inhabiting plants compared to dairy LAB. Kimchi is a Korean traditional fermented vegetable, and its fermentation is carried out by LAB inhabiting plant raw materials of kimchi. Kimchi represents a model food with low pH and is fermented at low temperatures and in anaerobic environments. LAB have been adjusting to kimchi environments, and produce various metabolites such as bacteriocins, γ-aminobutyric acid, ornithine, exopolysaccharides, mannitol, etc. as products of metabolic efforts to adjust to the environments. The metabolites also contribute to the known health-promoting effects of kimchi. Due to the recent progress in multi-omics technologies, identification of genes and gene products responsible for the synthesis of functional metabolites becomes easier than before. With the aid of tools of metabolic engineering and synthetic biology, it can be envisioned that LAB strains producing valuable metabolites in large quantities will be constructed and used as starters for foods and probiotics for improving human health. Such LAB strains can also be useful as production hosts for value-added products for food, feed, and pharmaceutical industries. In this review, recent findings on the selected metabolites produced by kimchi LAB are discussed, and the potentials of metabolites will be mentioned.

Production, Characterization, and Antioxidant Activities of an Exopolysaccharide Extracted from Spent Media Wastewater after Leuconostoc mesenteroides WiKim32 Fermentation

Bacterial exopolysaccharides (EPSs) are important alternatives to plant polysaccharides in fermented products and exhibit antioxidant activity, which is particularly desirable for functional foods. This study evaluated the use of spent media wastewater (SMW) derived from kimchi fermentation for the production of an EPS and analyzed the characterization and antioxidant activity of the resulting EPS. The EPS concentration and conversion yields of sequential purification were 7.7-9.0 g/L and 38.6-45.1%, respectively. Fourier transform infrared spectra and NMR spectra indicated that the EPS was a linear glucan with α-(1 → 6) linkages. The EPS also exhibited thermal tolerance to high temperatures. In vitro antioxidant activity analyses indicated the scavenging activity on 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals, thiobarbituric acid reactance (TBAR), and ferric ion reducing antioxidant power (FRAP) values of 71.6-79.1, 28.2-33.0%, and 0.04-0.05 mM FeCl3, respectively. These results reveal that the EPS extracted from SMW has potential as a thermally tolerant, nontoxic, and natural antioxidant for industrial applications.

Characterization of exopolysaccharides produced by Weissella confusa XG-3 and their potential biotechnological applications

In this study, exopolysaccharides (EPSs) produced by Weissella confusa XG-3 were characterized. The monosaccharide composition of XG-3 EPS was determined to include glucose according to GC data, and its molecular weight was 3.19 × 10⁶ Da, as determined by HPLC. Scanning electron microscopy (SEM) revealed a smooth, porous, and branched structure, and atomic force microscopy (AFM) confirmed the presence of round lumps and chains on irregular surfaces of XG-3 EPS. The results of the Fourier transform infrared (FT-IR) and nuclear magnetic resonance (NMR) analyses suggested that XG-3 EPS is a linear α-(1,6)-linked dextran. X-ray diffraction (XRD) data confirmed the noncrystalline amorphous structure, and the results of the Congo red assay corresponded to the random coiled chain conformation of XG-3 dextran. XG-3 dextran exhibited good radical scavenging activity and reducing power and possessed high thermal stability, with a degradation temperature (Td) of 306.8 °C. The absolute value of the zeta potential and particle size of XG-3 dextran continually increased with increasing dextran concentration. The water contact angle showed that XG-3 dextran had relatively high hydrophobicity in the presence of sucrose. XG-3 dextran stimulated the growth of Lactobacillus spp. and Bifidobacterium spp. These findings indicate that XG-3 dextran has unique characteristics and can be potentially applied as a food additive and an antioxidant.

Weissella cibaria EIR/P2-derived exopolysaccharide: A novel alternative to conventional biomaterials targeting periodontal regeneration

Healing and regeneration of periodontium are considered as a complex physiological process. Therefore, treatments need to be addressed with highly effective components modulating the multiple pathways. In this study, exopolysaccharide (EPS) produced by Weissella cibaria EIR/P2, was partially purified from the culture supernatant and subjected to characterization within the aim of evaluating its potential for periodontal regeneration. High-Performance Liquid Chromatography analysis revealed a single-peak corresponding to the glucose which identified the EPS as dextran. Fourier transform-infrared spectra were also displayed characteristic peaks for polysaccharides. According to the results of gel permeation/size exclusion-chromatography, the molecular mass was determined to be 8 × 10⁶ Da. To clarify its anti-bacterial activity on Streptococcus mutans, effects on viability and biofilm formation was evaluated. At 50 mg/mL, dextran exhibited a bactericidal effect with 70% inhibition on biofilm formation. Besides, dose-dependent antioxidant effects were also detected. The efficacy of dextran in enhancing the viability of human periodontal ligament fibroblast cells (hPDLFCs) was evaluated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium-bromide (MTT) assay, and an increase was observed in the viability of hPDLFCs. In conclusion, dextran derived from W. cibaria can be potentially used as a multi-functional bioactive polymer in the design of new therapeutic strategies to promote healing and regeneration of periodontium.

Isolation, characterization and cytoprotective effects against UV radiation of exopolysaccharide produced from Paenibacillus polymyxa PYQ1

A novel exopolysaccharide (EPS) from Paenibacillus polymyxa PYQ1 was extracted, well purified and characterized. This EPS was homogeneous glucomannan-type polysaccharide with the average molecular weight of 4.38 × 10⁶ Da. Structural characterization indicated that the monosaccharides of EPS were pyranoses connected by β-glycosidic linkages. Furthermore, our results showed the protective benefits of EPS against UVC induced cytotoxicity in HaCaT cells through scavenging excessive reactive oxygen species, mitigating the decrease of mitochondrial membrane potential, improving catalase activity and maintaining membrane integrity. Taken together, this study qualified EPS from P. polymyxa PYQ1 was a promising natural polymer which worth further investigation as a skin-care agent.

What Is in Store for EPS Microalgae in the Next Decade?

Microalgae and their metabolites have been an El Dorado since the turn of the 21st century. Many scientific works and industrial exploitations have thus been set up. These developments have often highlighted the need to intensify the processes for biomass production in photo-autotrophy and exploit all the microalgae value including ExoPolySaccharides (EPS). Indeed, the bottlenecks limiting the development of low value products from microalgae are not only linked to biology but also to biological engineering problems including harvesting, recycling of culture media, photoproduction, and biorefinery. Even respecting the so-called "Biorefinery Concept", few applications had a chance to emerge and survive on the market. Thus, exploiting EPS from microalgae for industrial applications in some low-value markets such as food is probably not a mature proposition considering the competitiveness of polysaccharides from terrestrial plants, macroalgae, and bacteria. However, it does not imply drawing a line on their uses but rather "thinking them" differently. This review provides insights into microalgae, EPS, and their exploitation. Perspectives on issues affecting the future of EPS microalgae are also addressed with a critical point of view.

Optimization and partial characterization of ca-independent α-amylase from Bacillus amyloliquefaciens BH1

Strain Bacillus amyloliquefaciens BH1 was evaluated for the generation of α-amylase. Culture conditions and medium components were optimized by a statistical approach for the optimal generation of α-amylase with response surface methodology (RSM) method. The Plackett-Burman (PB) design was executed to select the fermentation variables and Central composite design (CCD) for optimizing significant factors influencing production. The optimum levels for highest generation of α-amylase activity (198.26 ± 3.54 U/mL) were measured. A 1.69-fold improve generation was acquired in comparison with the non-optimized. Partial characterization of the α-amylase indicated optimal pH and temperature at 7.0 and 40 °C, respectively. Crude α-amylase maintained a constant pH range 5.0-8.0 and 30-70 °C. The α-amylase was independent of Ca²⁺, and the activity was inhibited by Fe³⁺, Co²⁺, Cu²⁺, and Hg²⁺. The thermo and pH stability of the α-amylase indicate its extensive application in the food and pharmaceutical industries.

Purification and characterization of exopolysaccharide produced by Weissella cibaria YB-1 from pickle Chinese cabbage

An exopolysaccharide (EPS) was produced by Weissella cibaria YB-1 isolated from pickle Chinese cabbage. The EPS was purified and characterized. The monosaccharide composition of the EPS was glucose, and its molecular mass was 3.89 × 10⁶ Da, as determined by gas chromatography (GC) and high performance liquid chromatography (HPLC). The structural characterization of purified EPS determined by Fourier transform infrared (FT-IR) spectra and nuclear magnetic resonance (NMR) spectra demonstrated that W. cibaria YB-1 synthesized a linear dextran that predominately had α-(1 → 6) glycosidic linkages with only a few α-(1 → 3) (4.3%) linked branches. The water solubility index (WSI), water holding capacity (WHC) and emulsifying activity (EA) of YB-1 dextran were 95.23 ± 4.45, 287.84 ± 16.23 and 84.43 ± 3.65%, respectively. The in-vitro antioxidant activities of the dextran showed good scavenging effects on superoxide anion radical and hydroxyl radical.

Isolation, purification and characterization of exopolysaccharide produced by Leuconostoc pseudomesenteroides YF32 from soybean paste

A water-soluble exopolysaccharide (EPS)-producing strain YF32 was isolated from soybean paste, which was then identified as Leuconostoc pseudomesenteroides. After culturing the strain in Man-Rogosa-Sharpe (MRS) medium containing 5% sucrose at 30°C for 48h, the EPS was purified, and a yield of 12.5g/L was achieved. The weight-average molecular weight (Mw) was 5.54×106Da by high-performance size-exclusion chromatography (HPSEC). The structural characterization of the purified EPS was determined by gas chromatography (GC), Fourier transform infrared (FT-IR), 1H, 13C nuclear magnetic resonance (NMR) spectroscopy. The results demonstrated that the exopolysaccharide was glucan with a peak, a linear backbone composed of consecutive α-(1→6)-linked d-glucopyranose units. No branching was observed in the dextran structure. The degradation temperature (Td) of EPS was 307.62°C, which suggested that dextran exhibited high thermal stability. YF32 dextran also showed high water solubility and emulsibility. All results suggested that dextran has the potential to be applied in food fields as a food additive.

Purification, characterization and antioxidant activity of dextran produced by Leuconostoc pseudomesenteroides from homemade wine

An exopolysaccharide (EPS) was produced by Leuconostoc pseudomesenteroides DRP-5 isolated from homemade wine. The EPS was obtained with ethanol extraction, which was further purified by chromatography of Sephadex G-100 to get a purified fraction. The monosaccharide composition of the EPS was glucose, and its molecular weight (Mw) was 6.23 × 10⁶ Da, as determined by gas chromatography (GC) and high-performance size-exclusion chromatography (HPSEC). Fourier transform infrared spectra (FT-IR) and nuclear magnetic resonance spectra (NMR) showed that the EPS was a linear glucan with α-(1→6)-linked glucosidic bonds. The water holding capacity (WHC), water solubility index (WSI) and emulsifying activity (EA) of DRP-5 EPS were 296.76 ± 18.93%, 98.62 ± 3.57% and 87.22 ± 2.18%, respectively. DRP-5 EPS have a higher degradation temperature of 278.36 °C, suggesting high thermal stability of the EPS. Also, DRP-5 EPS was found to have moderate 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical, hydroxyl radical, superoxide anion radical, 2,2'-Azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) radical, Fe²⁺ scavenging activities and reducing power. All these characteristics suggest that DRP-5 EPS might have potential applications in the pharmaceutical, cosmetic and food industries.