Nanocomposite starch-based films containing silver nanoparticles synthesized with lemon juice as reducing and stabilizing agent

Recent advances of silver nanoparticle-based polymer nanocomposites for biomedical applications

Silver nanoparticle-polymer nanocomposites (AgNP-PNCs) represent a transformative advancement in biomedical material science, integrating the potent antimicrobial properties of AgNPs with the structural versatility of polymer matrices. This synergy enables enhanced infection control, mechanical stability, and controlled drug delivery, making these nanocomposites highly suitable for applications such as wound healing, medical coatings, tissue engineering, and biosensors. Recent progress in synthesis and functionalization has led to greater control over particle morphology, dispersion, and stability, optimizing AgNP-PNCs for clinical and translational applications. However, challenges related to cytotoxicity, long-term stability, immune response, and scalability persist, necessitating systematic improvements in surface functionalization, hybridization strategies, and biocompatibility assessments. This review critically evaluates the latest advancements in AgNP-PNC development, focusing on their functionalization techniques, regulatory considerations, and emerging strategies to overcome biomedical challenges. Additionally, it discusses preclinical and translational aspects, including commercialization barriers and regulatory frameworks such as FDA and EMA guidelines, ensuring a comprehensive outlook on their clinical feasibility. By bridging the gap between innovation and practical application, this review investigates the transformative potential of AgNP-PNCs in advancing next-generation biomedical materials.

Physical and thermal improvement of bioplastics based on potato starch/agar composite functionalized with biogenic ZnO nanoparticles

This study investigated potato starch/agar-based bioplastics' structure, properties, and biodegradability by adding ZnO nanoparticles (NPs) biogenically synthesized using Coriandrum sativum extract. ZnO NPs presented crystalline structure, good optical properties, and a size of 6.75 ± 1.4 nm, which were added at various concentrations (419.66-104.23 ppm) in bioplastics and their presence was confirmed via EDS elemental analysis and X-ray fluorescence. The highest NPs concentration contributed to a smoother surface, while FTIR and Raman analyses suggested interactions between the NPs and functional groups of the biopolymeric matrix. ZnO NPs addition slightly reduced bioplastic transparency but significantly improved UV-A and UV-B blocking capacities. It also increased hydrophobicity, evidenced by a 22 % reduction in water absorption and a 55 % increase in contact angle. Thermogravimetric analysis (TGA) indicated that NPs raised the bioplastic's thermal stability. Mechanical property tests showed that ZnO NPs concentrations had negligible or negative effects probably due to the heterogeneous distribution of NPs, or the non-isotropic characteristic of the bioplastic. Finally, biodegradability assays in seawater and soil revealed over 43.5 % and 66 % degradation after 15 and 28 days, respectively. Therefore, biosynthesized ZnO NPs mainly enhanced the bioplastic's UV-blocking capacity, hydrophobicity, and thermal properties, offering an eco-friendly option for future studies/applications.

Progress in food packaging applications of biopolymer-nanometal composites - A comprehensive review

Eco-friendly nanotechnology-enabled biopolymers are one of the novel concepts of packaging materials to substitute traditional synthetic polymers and their composites. This article succinctly reviews the recent developments of introducing additional functionalities to biopolymers using metal and metal oxide nanoparticles. The functionality of metal nanoparticles such as silver, zinc oxide, titanium dioxide, copper oxide, gold, and magnesium oxide, as food packaging materials were discussed. The addition of nanoparticles in biopolymers improves mechanical properties, gas barrier properties, durability, temperature stability, moisture stability, antimicrobial activity, antioxidant property, and UV absorbance and can prevent the presence of ethylene and oxygen, hence extending the shelf life of foodstuffs. Other than this, the functional activity of these biopolymer composite films helps them to act like smart or intelligent packaging. The selection of metal nanoparticles, particle migration, toxicological effect, and potential future scope in the food packaging industry are also reviewed.

A bioinspired and sustainable route for the preparation of Ag-crosslinked alginate fibers decorated with silver nanoparticles

Functional materials obtained through green and sustainable routes are attracting particular attention due to the need to reduce the environmental impact of the chemical industry. In this work we propose a bioinspired approach for the preparation of alginate fibers containing silver nanoparticles (AgNPs), to be used for antimicrobial purposes. We demonstrate that filiform polymeric structures with length of a few meters can be easily obtained by extruding an alginate solution in an aqueous Ag+-containing bath (i.e. wet spinning) and that treating the fibers with freshly-squeezed lemon juice leads to the formation of AgNPs homogeneously distributed within the polymeric network. Using mixtures of ascorbic and citric acid to mimic lemon juice composition we highlight the influence of the aforementioned molecules on the nanoparticles formation process as well as on the properties of the fibers. Varying the amount of citric and ascorbic acid used for the treatment allows to finely tune the thermal, morphological and water absorption properties of the fibers. This evidence, along with the possibility to easily monitor the preparation through FT-IR spectroscopy, endows the fibers with a high application potential in several fields such as wound healing, water/air purification and agriculture.

Sustainable and Bio-Based Food Packaging: A Review on Past and Current Design Innovations

Food loss and waste occur for many reasons, from crop processing to household leftovers. Even though some waste generation is unavoidable, a considerable amount is due to supply chain inefficiencies and damage during transport and handling. Packaging design and materials innovations represent real opportunities to reduce food waste within the supply chain. Besides, changes in people's lifestyles have increased the demand for high-quality, fresh, minimally processed, and ready-to-eat food products with extended shelf-life, that need to meet strict and constantly renewed food safety regulations. In this regard, accurate monitoring of food quality and spoilage is necessary to diminish both health hazards and food waste. Thus, this work provides an overview of the most recent advances in the investigation and development of food packaging materials and design with the aim to improve food chain sustainability. Enhanced barrier and surface properties as well as active materials for food conservation are reviewed. Likewise, the function, importance, current availability, and future trends of intelligent and smart packaging systems are presented, especially considering biobased sensor development by 3D printing technology. In addition, driving factors affecting fully biobased packaging design and materials development and production are discussed, considering byproducts and waste minimization and revalorization, recyclability, biodegradability, and other possible ends-of-life and their impact on product/package system sustainability.

Comparison of Physicochemical Properties of Silver and Gold Nanocomposites Based on Potato Starch in Distilled and Cold Plasma-Treated Water

Nanometal-containing biocomposites find wide use in many industries and fields of science. The physicochemical properties of these materials depend on the character of the polymer, the size and shape of the metallic nanoparticles, and the interactions between the biopolymer and the nanoparticles. The aim of the work was to synthesise and study the effect of plasma-treated water on the properties of the obtained metallic nanoparticles as well as the physicochemical and functional properties of nanocomposites based on potato starch. The metallic nanoparticles were synthesised within a starch paste made in distilled water and in distilled water exposed to low-temperature, low-pressure plasma. The materials produced were characterised in terms of their physicochemical properties. Studies have shown that gold and silver nanoparticles were successfully obtained in a matrix of potato starch in distilled water and plasma water. SEM (Scanning Electron Microscopy) images and UV-Vis spectra confirmed the presence of nanosilver and nanosilver in the obtained composites. On the basis of microscopic images, the size of nanoparticles was estimated in the range from 5 to 20 nm for nanoAg and from 15 to 40 nm for nanoAu. The analysis of FTIR-ATR spectra showed that the type of water used and the synthesis of gold and silver nanoparticles did not lead to changes in the chemical structure of potato starch. DLS analysis showed that the nanoAg obtained in the plasma water-based starch matrix were smaller than the Ag particles obtained using distilled water. Colour analysis showed that the nanocomposites without nanometals were colourless, while those containing nanoAg were yellow, while those with nanoAu were dark purple. This work shows the possibility of using plasma water in the synthesis of nanometals using potato starch, which is a very promising polysaccharide in terms of many potential applications.

Antibacterial Activity of Biodegradable Films Incorporated with Biologically-Synthesized Silver Nanoparticles and the Evaluation of Their Migration to Chicken Meat

The food industry has been exploring the association of polymers with nanoparticles in packaging production, and active products are essential to increase the shelf life of food and avoid contamination. Our study developed starch-poly (adipate co-terephthalate butyl) films with silver nanoparticles produced with Fusarium oxysporum components (bio-AgNPs), intending to control foodborne pathogens. The bio-AgNPs showed activity against different Salmonella serotypes, including multidrug-resistant Salmonella Saint Paul and Salmonella Enteritidis, with minimum bactericidal concentrations ranging from 4.24 to 16.98 µg/mL. Biodegradable films with bio-AgNPs inhibited the growth of up to 10⁶Salmonella isolates. Silver migration from the films to chicken was analyzed using electrothermal atomic absorption spectrophotometry, and the results showed migration values (12.94 mg/kg and 3.79 mg/kg) above the limits allowed by the European Food Safety Authority (EFSA) (0.05 mg/kg). Thus, it is necessary to improve the technique to avoid the migration of silver to chicken meat, since these concentrations can be harmful.

Recent advances in biobased and biodegradable polymer nanocomposites, nanoparticles, and natural antioxidants for antibacterial and antioxidant food packaging applications

Inorganic nanoparticles (NPs) and natural antioxidant compounds are an emerging trend in the food industry. Incorporating these substances in biobased and biodegradable matrices as polysaccharides (e.g., starch, cellulose, and chitosan) and proteins has highlighted the potential in active food packaging applications due to more significant antimicrobial, antioxidant, UV blocking, oxygen scavenging, water vapor permeability effects, and low environmental impact. In recent years, the migration of metal NPs and metal oxides in food contact packaging and their toxicological potential have raised concerns about the safety of the nanomaterials. In this review, we provide a comprehensive overview of the main biobased and biodegradable polymer nanocomposites, inorganic NPs, natural antioxidants, and their potential use in active food packaging. The intrinsic properties of NPs and natural antioxidant actives in packaging materials are evaluated to extend shelf-life, safety, and food quality. Toxicological and safety aspects of inorganic NPs are highlighted to understand the current controversy on applying some nanomaterials in food packaging. The synergism of inorganic NPs and plant-derived natural antioxidant actives (e.g., vitamins, polyphenols, and carotenoids) and essential oils (EOs) potentiated the antibacterial and antioxidant properties of biodegradable nanocomposite films. Biodegradable packaging films based on green NPs-this is biosynthesized from plant extracts-showed suitable mechanical and barrier properties and had a lower environmental impact and offered efficient food protection. Furthermore, AgNPs and TiO₂ NPs released metal ions from packaging into contents insufficiently to cause harm to human cells, which could be helpful to understanding critical gaps and provide progress in the packaging field.

Starch Nanocomposite Films: Migration Studies of Nanoparticles to Food Simulants and Bio-Disintegration in Soil

In this work, films containing AgNPs were obtained by different green synthesis techniques (AgNP in situ and AgNP L). The inclusion of nanoparticles in the starch matrix improved both mechanical and barrier properties. The migration of AgNPs from the nanocomposite material to three food simulants (water, 3% v/v acetic acid and 15% v/v ethanol) was studied. The experimental data were fitted by using different widely accepted mathematical models (Fickian, Ritger and Peppas, and Weibull), indicating that the AgNP migration followed a complex mechanism. The silver concentration (mg Ag per kg of simulant) that was released from the nanocomposite films was higher for the samples with AgNPs in situ than for those containing AgNP L. Likewise, the maximum release value (0.141 mg/dm² for AgNPs in situ in acetic acid simulant) was lower than the limits proposed by the legislation (European Commission and MERCOSUR; 10 and 8 mg/dm², respectively). The replacement of conventional plastic materials by biodegradable ones requires the evaluation of bio-disintegration tests in soil. In this sense, a period of 90 days was necessary to obtain ≥50% weight loss in both nanocomposite films. Additionally, the bio-disintegration of the samples did not contribute with phytotoxic compounds to the soil, allowing the germination of fast-growing seeds.

Edible film of native jicama starch, agarwood Aetoxylon Bouya essential oil and calcium propionate: Processing, mechanical, thermal properties and structure

The objective of this study was to determine the properties of natural jicama starch and edible film made from the starch. The film was prepared by adding agarwood aetoxylon bouya essential oil and calcium propionate to investigate its properties as an edible coating for fruit or vegetables. The microstructure of the edible film was observed using scanning electron microscopy. The three main materials mostly had significant effects (P < 0.05) on the properties of the sample films, and starch film incorporating essential oil‑calcium propionate showed optimum properties as an edible coating material because it had the highest elongation of 10.81%, the lowest stiffness with a Young's modulus of about 2.53 MPa, the lowest of water vapor transmission rate and permeability of 0.117 g h^-1 m^-2 and 3.092 g mm h^-1 m^-2 kPa^-1, respectively, and the lowest weight loss of 75.30%. It was also found that the microstructure of starch-essential oil‑calcium propionate film had a homogeneous surface and the presence of essential oil droplets was not visible.

Cellulose Nanofiber-Assisted Dispersion of Halloysite Nanotubes via Silane Coupling Agent-Reinforced Starch–PVA Biodegradable Composite Membrane

HNTs (halloysite nanotubes) are widely used in reinforcing material, often used in material reinforcement and particle loading. However, their easy agglomeration causes them to have great limitations in application. In this work, two kinds of silane coupling agents (KH560 and KH570) were introduced to graft the CNF/HNT (cellulose nanofiber) nanoparticles used to reinforce the starch-polyvinyl alcohol (PVA) composite membranes. The mechanical properties, water resistance properties and thermal performance of the composite membrane were tested. The results showed that the CNF/HNTs nanoparticle system modified by two silane coupling agents enhanced the tensile strength (TS) of the starch–PVA composite membranes by increments of 60.11% and 68.35%, and, in addition, the water resistance of starch–PVA composite membrane improved. The introduction of chemical bonds formed associations and a compact network structure, which increased the thermal stability and the crystallinity of the starch–PVA composite membrane. In the study, we creatively used CNF to disperse HNTs. CNF and HNTs were combined under the action of the silane coupling agent, and then mixed into the starch–PVA membranes matrix to prepare high-performance degradable biological composite membranes.

Fast and Sensitive Determination of Bioflavonoids Using a New Analytical System Based on Label-Free Silver Triangular Nanoplates

Optical sensors based on silver triangular nanoplates (AgTNPs) are insufficiently studied as probes for the spectrophotometric determination of biologically active compounds. In the present article, an interaction between label-free AgTNPs and bioflavonoids in the presence of silver(I) ions was assessed to outline the possibilities of AgTNPs as a colorimetric probe for the fast and sensitive determination of bioflavonoids. It is shown that the interaction was accompanied by a bathochromic shift of the local surface plasmon resonance band of nanoparticles and an increase in its intensity. Seven bioflavonoids differing in their structure were tested. The influence of the structure of analytes and the main external factors on the analytical signal is discussed in detail. It was found that the detection limits of bioflavonoids in the selected optimal conditions increased in the series morin < rutin = quercetin < taxifolin and came to 0.9, 1.2, 1.2, and 2.0 μmol L-1, respectively. Chrysin, naringenin, and naringin were found not to affect the spectral characteristics of AgTNPs. The suggested approach was applied for the spectrophotometric determination of flavonoids in pharmaceuticals and onion peel.

Biobased composites from agro-industrial wastes and by-products

The greater awareness of non-renewable natural resources preservation needs has led to the development of more ecological high-performance polymeric materials with new functionalities. In this regard, biobased composites are considered interesting options, especially those obtained from agro-industrial wastes and by-products. These are low-cost raw materials derived from renewable sources, which are mostly biodegradable and would otherwise typically be discarded. In this review, recent and innovative academic studies on composites obtained from biopolymers, natural fillers and active agents, as well as green-synthesized nanoparticles are presented. An in-depth discussion of biobased composites structures, properties, manufacture, and life-cycle assessment (LCA) is provided along with a wide up-to-date overview of the most recent works in the field with appropriate references. Potential uses of biobased composites from agri-food residues such as active and intelligent food packaging, agricultural inputs, tissue engineering, among others are described, considering that the specific characteristics of these materials should match the proposed application.

Insights into the correlations between the size of starch at nano- to microscale and its functional properties based on asymmetrical flow field-flow fractionation

In this study, the starches were isolated from three botanical sources (i.e., rice, sweet potato, and lotus seed). The size distributions of starch granules and molecules were determined by asymmetrical flow field-flow fractionation (AF4), and compared with those measured from optical microscopy (OM) and dynamic light scattering (DLS). Furthermore, the starches were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). AF4 coupled online with UV-visible, multiangle light scattering (MALS), and differential refractive index (dRI) detectors (AF4-UV-MALS-dRI) was employed for the investigation of the digestion and retrogradation properties of starches. Meanwhile, the relationships between the size of starch at nano- to microscale and its functional properties (i.e., digestibility, retrogradation, and thermal properties) were studied by Pearson correlation analysis. AF4-UV-MALS-dRI was proved to be a rapid and gentle method for the separation and size characterization of starches at both micro- and nano-molecule levels. Moreover, it was demonstrated that AF4-UV-MALS-dRI is a useful tool for the monitoring of the digestion and retrogradation properties of starches. The results suggested that the sizes of starch granules and molecules were to some extent correlated with their thermal properties and digestibility, but not with retrogradation property.

Active Double-Layered Films Enriched with AgNPs in Great Water Dock Root and Pu-Erh Extracts

A novel, eco-friendly, and biocompatible method was applied to form silver nanoparticles (AgNPs) in great water dock (Lapathi radix) (KB) and pu-erh (Camellia sinensis) (PE) extracts. The surface plasma resonance peak of green synthesized AgNPs at 451.8 nm for AgNPs+KB and 440.8 nm for AgNPs+PE was observed via spectral analysis of UV absorbance. In this study, double-layered biopolymer films (FUR/CHIT+HGEL) with AgNPs incorporated in KB solution (AgNPs+KB) and AgNPs in PE solution (AgNPs+PE), were successfully prepared using the casting method. The SEM, XRD, zeta potential and size analyses confirmed the presence of AgNP in the films. The addition of AgNPs in plant extracts improved antimicrobial and antioxidant activity and thermal stability, whereas WVTR experienced a decrease. The nanocomposite films’ orange-brown colour may aid in the protection of food products against UV rays. The composite films demonstrated antibacterial activity against food-borne pathogens and may offer potential in food packaging applications.

High-Throughput Fabrication of Antibacterial Starch/PBAT/AgNPs@SiO2 Films for Food Packaging

In this current work, antimicrobial films based on starch, poly(butylene adipate-co-terephthalate) (PBAT), and a commercially available AgNPs@SiO₂ antibacterial composite particle product were produced by using a melt blending and blowing technique. The effects of AgNPs@SiO₂ at various loadings (0, 1, 2, 3, and 4 wt%) on the physicochemical properties and antibacterial activities of starch/PBAT composite films were investigated. AgNPs@SiO₂ particles were more compatible with starch than PBAT, resulting in preferential distribution of AgNPs@SiO₂ in the starch phase. Infusion of starch/PBAT composite films with AgNPs@SiO₂ marginally improved mechanical and water vapor barrier properties, while surface hydrophobicity increased as compared with films without AgNPs@SiO₂. The composite films displayed superior antibacterial activities against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. The sample loaded with 1 wt% AgNPs@SiO₂ (SPA-1) showed nearly 90% inhibition efficiency on the tested microorganisms. Furthermore, a preliminary study on peach and nectarine at 53% RH and 24 °C revealed that SPA-1 film inhibited microbial spoilage and extended the product shelf life as compared with SPA-0 and commercial LDPE packaging materials. The high-throughput production method and strong antibacterial activities of the starch/PBAT/AgNPs@SiO₂ composite films make them promising as antimicrobial packaging materials for commercial application.

[Development of an asymmetrical flow field-flow fractionation system for the size characterization of starch granules]

淀粉颗粒粒径与分子尺寸分别在1~100 μm和20~250 nm之间,是影响淀粉功能特性的重要因素之一。非对称场流分离(AF4)是一种基于样品与外力场相互作用机制的分离技术,已应用于表征淀粉分子尺寸分布。商品化的AF4系统的粒径检测范围为1 nm~10 μm,对于淀粉颗粒粒径表征具有一定的局限性。该文研制了AF4分离系统;考察了其在微米尺度下对红薯、莲子和大米淀粉颗粒粒径表征的性能;采用微米尺寸的聚苯乙烯乳化球(PS)标准样品验证了构建的AF4系统的分离性能。实验结果显示,构建的AF4系统对PS混合样品(粒径2、6、12、20 μm)实现了基线分离,同商品化AF4相比提高了检测上线,具有分离表征淀粉颗粒的潜力。此外,该文研究了载液组成对淀粉颗粒分离表征的影响;通过光学显微镜验证了构建的AF4系统在微米尺度上对淀粉颗粒粒径分布的表征能力。最后,采用商品化的AF4系统串联多角度激光光散射检测器和示差折光检测器对3种淀粉分子进行了分离表征,考察了淀粉的溶解温度对其表征结果的影响。在摩尔质量10 ⁶~10⁸ g/mol范围内,红薯和莲子淀粉的回转半径和水合半径的比值(R_g/R_h)在0.9~1.1之间,大米淀粉的R_g/R_h在1.2~1.4之间。实验结果证明构建的AF4系统是一种快速、准确的淀粉颗粒粒径表征方法,与商品化的AF4系统结合可为研究淀粉尺寸分布与其功能性质之间的关系提供技术支持。

Polysaccharide-Based Nanocomposites for Food Packaging Applications

The article presents a review of the literature on the use of polysaccharide bionanocomposites in the context of their potential use as food packaging materials. Composites of this type consist of at least two phases, of which the outer phase is a polysaccharide, and the inner phase (dispersed phase) is an enhancing agent with a particle size of 1-100 nm in at least one dimension. The literature review was carried out using data from the Web of Science database using VosViewer, free software for scientometric analysis. Source analysis concluded that polysaccharides such as chitosan, cellulose, and starch are widely used in food packaging applications, as are reinforcing agents such as silver nanoparticles and cellulose nanostructures (e.g., cellulose nanocrystals and nanocellulose). The addition of reinforcing agents improves the thermal and mechanical stability of the polysaccharide films and nanocomposites. Here we highlighted the nanocomposites containing silver nanoparticles, which exhibited antimicrobial properties. Finally, it can be concluded that polysaccharide-based nanocomposites have sufficient properties to be tested as food packaging materials in a wide spectrum of applications.

Starch-Mucilage Composite Films: An Inclusive on Physicochemical and Biological Perspective

In recent years, scientists have focused on research to replace petroleum-based components plastics, in an eco-friendly and cost-effective manner, with plant-derived biopolymers offering suitable mechanical properties. Moreover, due to high environmental pollution, global warming, and the foreseen shortage of oil supplies, the quest for the formulation of biobased, non-toxic, biocompatible, and biodegradable polymer films is still emerging. Several biopolymers from varied natural resources such as starch, cellulose, gums, agar, milk, cereal, and legume proteins have been used as eco-friendly packaging materials for the substitute of non-biodegradable petroleum-based plastic-based packaging materials. Among all biopolymers, starch is an edible carbohydrate complex, composed of a linear polymer, amylose, and amylopectin. They have usually been considered as a favorite choice of material for food packaging applications due to their excellent forming ability, low cost, and environmental compatibility. Although the film prepared from bio-polymer materials improves the shelf life of commodities by protecting them against interior and exterior factors, suitable barrier properties are impossible to attain with single polymeric packaging material. Therefore, the properties of edible films can be modified based on the hydrophobic-hydrophilic qualities of biomolecules. Certain chemical modifications of starch have been performed; however, the chemical residues may impart toxicity in the food commodity. Therefore, in such cases, several plant-derived polymeric combinations could be used as an effective binary blend of the polymer to improve the mechanical and barrier properties of packaging film. Recently, scientists have shown their great interest in underutilized plant-derived mucilage to synthesize biodegradable packaging material with desirable properties. Mucilage has a great potential to produce a stable polymeric network that confines starch granules that delay the release of amylose, improving the mechanical property of films. Therefore, the proposed review article is emphasized on the utilization of a blend of source and plant-derived mucilage for the synthesis of biodegradable packaging film. Herein, the synthesis process, characterization, mechanical properties, functional properties, and application of starch and mucilage-based film are discussed in detail.

Exploiting of Green Synthesized Metal Oxide Nanoparticles for Spectrophotometric Determination of Levofloxacin, Cephalexin, and Cefotaxime Sodium in Commercial Products

In this study, two metal oxide nanoparticles NiO and MnO₂ were synthesized from green sources Mentha spicata (M. spicata) extract and Malus domestica (M. domestica) peel extract, respectively. The optical and physical properties of the synthesized nanoparticles were characterized using spectroscopic and microscopic techniques. Simple, precise, and new spectrophotometric probes were suggested for the determination of three cephalosporin antibiotics, including levofloxacin (LVX), cephalexin (CPX), and cefotaxime sodium (CTX) in their pure form and commercial products. The spectrophotometric detection of the selected drugs is based on the catalytic enhancement of NiO and MnO₂ nanoparticles (NPs) due to their unique optical properties. Linear relationships with main correlation coefficients 0.999 were obtained at 0.1–20, 1.0–80, and 0.001–100 µg mL⁻¹ for the three drugs in the presence of NiONPs, whereas 0.01–60, 0.1–160, and 0.01–80 µg mL⁻¹ were obtained in the presence of MnO₂NPs at absorption wavelengths 290, 262, and 235 nm for LVX, CPX and CTX, respectively. The analytical methods were validated and successfully used for determination of the instigated drugs in their bulk and commercial dosage forms.