Extraction optimization and structural characterization of pectin from persimmon fruit (Diospyros kaki Thunb. var. Rojo brillante)

Optimization of hypobaric and ultrasonic processing of persimmon rhamnogalacturonan-I to enhance drug-digestion interactions

The biological activity of polysaccharides used for nutraceuticals/drug excipients has been a neglected area of study. This work deals with the preparation, optimization, characterization, and evaluation of persimmon (Diospyros kaki Thunb.) fruit by-products and the study of the resultant dietary fiber (DF) interaction with other compounds, using acetaminophen as a model. Processing conditions for persimmon by-products were optimized to enhance antioxidant activity, with hypobaric, ultrasonic, and drying conditions tested at three levels of time and pH. The optimized DF was evaluated through in-vitro and ex-vivo release and permeation studies. Optimal conditions included three cycles of vacuum instantaneous expansion coupled with ultrasound waves (USEX), 42 min of ultrasound assisted extraction (UAE), and a pH of 1.5. After treatments, the antioxidant capacity (AC) increased six-fold, and zeta potential (ζ) analysis indicated polysaccharide aggregation at the optimized pH. The optimized polysaccharides, mainly formed by rhamnogalacturonan-I, displayed nuclear factor erythroid 2-related factor 2 (Nrf2)-dependent activity. In-vitro drug-DF interaction studies showed higher acetaminophen release during digestion. Permeation kinetics adhered to the Korsmeyer-Peppas model in both ex-vivo and in-vitro models, suggesting complex permeation mechanisms. Results suggest that the optimized DF enhances the bioavailability and controlled release of acetaminophen, indicating its potential for use in drug delivery systems and nutraceutical applications.

Optimization and characterization of physicochemical, morphological, structural, thermal, and rheological properties of microwave-assisted extracted pectin from Dillenia indica fruit

Microwave-assisted extraction of pectin from Dillenia indica (DI) fruit was optimized using Box-Behnken design to maximize yield and quality. Parameters such as solid:solvent (1:10-1:30), microwave power (200-600 W), and extraction time (4-10 min) were varied to determine the optimal conditions. Through experimentation, the optimized extraction parameters were identified as 1:23.66 solid:solvent, 400 W microwave power, and 7 min of extraction time, under which the predicted yield and equivalent weight were 19.68 % and 915.93, respectively. The optimized conditions were validated experimentally (yield:19.4 ± 0.35 %) and equivalent weight:914.57 ± 0.62), showing close agreement with predicted values. Physicochemical properties of the extracted pectin were determined, revealing an effective pore radius of 0.263 ± 0.005 mm and a swelling index order of: water(1) > pH 6(0.7) > HCl(0.3). Moisture content was measured as 7.23 ± 0.25 %, while ash content was found to be 2.23 ± 0.25 %. Further analysis included the determination of methoxyl value, anhydrouronic acid content, degree of esterification, and protein content, which were 9.61 ± 0.31 %, 73.56 ± 1.86 %, 74.15 ± 0.28 %, and 1.16 ± 0.16 %, respectively. Monosaccharide composition revealed presence of neutral sugars, glucose, arabinose and rhamnose and molecular weight was 71,489 g/mol. Morphological characteristics, assessed using scanning electron microscopy, showed a rough, irregular surface of DI fruit pectin. Fourier-transform infrared spectroscopy (FTIR) indicated similarity to standard high methoxyl pectin, while nuclear magnetic resonance (NMR) confirmed characteristic functional groups. Thermal behaviour, determined via differential scanning calorimetry (DSC), exhibited endothermic and exothermic transitions at 83.6 °C and 260.027 °C, respectively. Rheological and functional properties revealed DI fruit pectin solution as a non-Newtonian fluid with shear thinning behaviour, forming weak gels and that its emulsion capacity increased with increase in pectin concentration. Overall, this study provides a comprehensive characterization of microwave-assisted extracted pectin from Dillenia indica fruit, offering insights into its potential applications in food industries.

A critical review of persimmon-derived pectin: Innovations in extraction, structural characterization, biological potentials, and health-promoting effects

Persimmon-derived pectin (PP) is a versatile dietary polysaccharide with considerable industrial and biological significance, demonstrating a range of functionalities and health-promoting benefits. This review explores the changes in PP during postharvest and processing, detailing structural alterations and extraction techniques for optimal characteristics. Key functional attributes of PP-such as emulsification, rheology, antioxidant capacity, immunomodulation, and gut microbiota regulation-highlight its potential applications in food, healthcare, pharmaceuticals, and cosmetics. The review also explores methods to enhance the functional properties of PP through synergistic interactions with polyphenols. A strategic roadmap for advancing PP research is proposed, connecting extraction methods, structural characteristics, and functional properties to tailor PP for specific applications in food science and technology. Overall, persimmon-derived pectin is positioned as a valuable food-derived bioactive ingredient with diverse capabilities, poised to drive innovation and advance nutritional science across multiple sectors.

Improved exopolysaccharide production by Lactiplantibacillus plantarum Z-1 under hydrogen peroxide stress and its physicochemical properties

In this study, a strain with good exopolysaccharide (EPS)-producing ability was isolated from the fermented Benincasa hispida and identified as Lactiplantibacillus plantarum Z-1. Its EPS production was further improved by H2O2 stress under optimized culture conditions, increasing from 180 ± 0.45 mg/L to 409.52 ± 2.16 mg/L. Purification of EPS with DEAE-52 and subsequent Sephadex G-100 column chromatography provided three fractions, namely, EPS-0, EPS-1 and EPS-3, respectively. The molecular weight of EPS, EPS-0, EPS-1 and EPS-3 were 85.4, 25.7, 131.88 and 93.2 kDa, respectively. EPS, EPS-1 and EPS-3 were mainly composed of glucose, rhamnose, arabinose and galactose with molar ratios of 1:0.544:0.211:0.281, 1:1.279:0.807:0.704, and 1:1.459:0.759:0.75, respectively, along with small proportions of fucose, mannose and xylose. EPS-0 was composed of glucose, arabinose, galactose and xylose, with molar ratios of 1:0.618:0.206:0.275. The structural analysis indicated that EPS-3 was mainly consisted of (1,2,4)-β-Rhap, (1,2,3)-β-Araf, (1,4)-β-Galp, T-α-Glcp units. The three purified fractions showed typical characteristics of non-Newtonian fluids and good viscoelasticity. Congo red test revealed that irregular triple-helical conformation existed in EPS and EPS-3. These physicochemical properties of EPSs make them a potential candidate for the use as a health-beneficial food additive in the food processing industry.

Influence of pH on the emulsifying property of high methyl-esterified citrus pectin in the presence of calcium cations

High methyl-esterified citrus pectin (HMCP) is often used as a thickness in food products and is considered a poor emulsifier, especially in neutral pH solutions. Our previous findings show that the emulsifying capacity of HMCP could be significantly enhanced by calcium cations. Besides, the pH of the solution decreased in the presence of calcium cations. However, the impact of solution pH on HMCP emulsifying capacity in the presence of calcium cations is unclear. In this study, the pH of the HMCP solution was adjusted from 3.00 to 8.00 before adding calcium cations. The solution properties and emulsifying properties were analyzed in light of the existence of calcium cations. The results showed that the pH of the HMCP solutions decreased after bringing calcium cations into them. Calcium cations could change the solution rheological properties, particle size distributions and morphologies, and the particle microenvironmental hydrophobic areas in HMCP solutions while increasing the pH of HMCP solutions, contributing to improving the emulsifying capacity of HMCP. HMCP had the best emulsifying ability when the pH of the HMCP solutions was kept at a neutral level. This research gives us new ideas to adjust the emulsifying property of HMCP.

Tyramine-assisted fluorescent labeling of polysaccharides: Characterization, and interfacial properties

Fluorescence labeling has been widely used in various fields, including fluorescent sensors, biochemistry, medical and chemical research. This study proposed an efficient strategy for the detection and microanalysis of polysaccharides. Soy hull polysaccharide (SHP) was successfully labeled with fluorescein isothiocyanate (FITC) via an amination reaction using tyramine as a linker. The labeled polysaccharide (FTSHP) was characterized by fluorescence, UV-visible, flourier transform infrared (FT-IR), 1H NMR, differential scanning calorimetry (DSC) and interfacial tension. The results indicated that the labeling efficiency of FTSHP with different concentration of FITC (0.20-0.35 wt%) was 1.51 %, 1.58 %, 1.63 %, and 1.67 %, respectively, with fluorescence intensity increasing as FITC concentration increased. Moreover, the interfacial adsorption capacity and thermal stability of FTSHP were significantly improved compared to SHP. This labeling method offers a promising approach for detection and analysis of polysaccharides, providing new insights into the study of other natural polysaccharides.

Sunflower Meal Valorization through Enzyme-Aided Fractionation and the Production of Emerging Prebiotics

Recently, there has been a burgeoning interest in harnessing the potential of biomass and industry byproducts for the development of novel products and materials. In particular, this study explored the efficient valorization of sunflower meal (SFM), an underutilized byproduct of the oil extraction industry, usually discarded or used as low-value animal feed through enzyme-aided fractionation, specifically targeting the extraction and conversion of its abundant carbohydrate component, xylan, into emerging prebiotic compounds-xylo-oligosaccharides (XOSs)-which are recognized as promotors of a healthy gut microbiome and overall human wellbeing. An enzymatic treatment using Alcalase® 2.4 L was implemented for facilitating the recovery of a highly pure hemicellulosic fraction (92.2% carbohydrates) rich in β-(1→4)-linked xylose residues with arabinose and glucuronic acid substitutions (DP-xylan). A further enzymatic treatment of this substrate, using ROHALASE® SEP-VISCO under optimized conditions (70 °C, pH 6, 0.005% v/v enzyme concentration), produced 52.3% of XOSs with a polymerization degree (DP) less than 20 after two hours. Further analyses demonstrated that the majority of the obtained product had a DP less than 6, predominantly consisting of di- and trisaccharides (XOS2 and XOS3) without the significant generation of xylose. These findings highlight the significant potential of SFM for the generation of valuable prebiotic compounds in a sustainable manner.

Extraction and Structural Analysis of Sweet Potato Pectin and Characterization of Its Gel

Pectin is widely used in the food and pharmaceutical industries. However, data on sweet potato pectin extraction and structural property analyses are lacking. Here, for the high-value utilization of agricultural processing waste, sweet potato residue, a byproduct of sweet potato starch processing, was used as raw material. Ammonium oxalate, trisodium citrate, disodium hydrogen phosphate, hydrochloric acid and citric acid were used as extractants for the pectin constituents, among which ammonium oxalate had a high extraction rate of sweet potato pectin, low ash content and high molecular weight. Structural and gelation analyses were conducted on ammonium oxalate-extracted purified sweet potato pectin (AMOP). Analyses showed that AMOP is a rhamnogalacturonan-I-type pectin, with a molecular weight of 192.5 kg/mol. Chemical titration and infrared spectroscopy analysis confirmed that AMOP is a low-ester pectin, and scanning electron and atomic force microscopy demonstrated its linear molecular structure. Gelation studies have revealed that Ca2+ is the key factor for gel formation, and that sucrose significantly enhanced gel hardness. The highest AMOP gel hardness was observed at pH 4, with a Ca2+ concentration of 30 mg/g, pectin concentration of 2%, and sucrose concentration of 40%, reaching 128.87 g. These results provide a foundation for sweet potato pectin production and applications.

Sodium alginate/guar gum based nanocomposite film incorporating β-Cyclodextrin/persimmon pectin-stabilized baobab seed oil Pickering emulsion for mushroom preservation

The poor biological, mechanical and water-resistance properties of sodium alginate/guar gum film (SG) limit its application in food preservation. To overcome this disadvantage, we added β-Cyclodextrin/persimmon pectin-stabilized baobab seed oil Pickering emulsion (BOPE) to enhance the mechanical and water resistance properties of SG film, and added green synthesized silver nanoparticles (AgNPS) and Lycium ruthenicum extract (LA) to improve the biological properties of the film. The properties of BOPE was optimized using Box-Behnken design (BBD). Scanning electron microscope and Fourier transform infrared results revealed the change of structure and molecular interaction in the SG film after the addition of AgNPS, LA, and optimized BOPE. The 2.0%BOPE-loaded film containing AgNPS/LA with the enhanced mechanical, barrier, BO retention, and biological properties not only improved the preservation effect on mushroom (A. bisporus), but also maintained structural stability. Thus, the 2.0%BOPE-loaded SG/LA/AgNPS film has considerable potential in active packaging applications.

Chemical characterization-function relationship of pectins from persimmon fruit within different ripeness

This study investigated the structural and functional characteristics of two different molecular weight persimmon pectin extracted from unripe persimmon (PP-1) and ripe persimmon (PP-2). The molecular weight was determined as 117.8 kDa and 61.3 kDa for PP-1 and PP-2, which consisting of glucose, rhamnose, mannose, galactose, and xylose. AFM results indicated PP-1 with many linear chains, and short chains in while short chains, branching points, and heterogeneous clumps were found in PP-2.Emulsion characterization and storage stability experiments revealed that PP-1 with more stable emulsifying properties than PP-2 and commercial citrus pectin. In vitro fermentation of PP-1 and PP-2 by gut microbiota indicated that PP-1 and PP-2 groups were higher than inulin group in total SCFAs production after 48 h of fermentation. This study provided useful information for high value utilization of persimmon pectin.

Structural, chemical and technofunctional properties pectin modification by green and novel intermediate frequency ultrasound procedure

The impact of intermediate frequency ultrasound (IFUS, 582, 864 and 1144 kHz), mode of operation (continue and pulsed) and ascorbic acid (Aa) addition on the structural, chemical and technofunctional properties of commercial citrus high methoxyl-grade pectin (HMP) was investigated. The chemical dosimetry of IFUS, monitored by the triiodide formation rate (I3-), demonstrated that the pulsed ratio (1900 ms on/100 ms off) at the three frequencies was similar to that of continue mode but IFUS1144 kHz produced more acoustic streaming demonstrated by the height liquid measured using image analysis. In presence of Aa, HMP presented higher fragmentation than in its absence. IFUS did not give rise any changes in the main functional groups of the HMP. In general, a reduction in molecular weight was observed, being the presence of Aa the most influencing factor. Regarding monosaccharides, IFUS modified the structure of homogalacturonan and rhamnogalacturonan-I and increased of GalA contents of the HMP in presence of Aa at the above three frequencies. A reducing of the consistency index (k) and increasing of the flow index (n) of HMP were showed by IFUS frequency and Aa addition. The emulsifying activity and stability index were increased for HMP treated by IFUS in continue mode at all frequencies and in presence of Aa. The results presented in this research shown the effectiveness of IFUS as tool to modify pectin into different structures with different functionalities.

Gelling properties of lysine-amidated citrus pectins: The key role of pH in both amidation and gelation

The amidation of pectin by amino acids has been widely applied due to its safety and excellent gelling properties. This study systematically examined the effects of pH on the gelling properties of lysine-amidated pectin during amidation and gelation. Pectin was amidated over the range of pH 4-10, and the amidated pectin obtained at pH 10 showed the highest degree of amidation (DA, 27.0 %) due to the de-esterification, electrostatic attraction, and the stretching state of pectin. Moreover, it also exhibited the best gelling properties due to its greater numbers of calcium-binding regions (carboxyl groups) and hydrogen bond donors (amide groups). During gelation, the gel strength of CP (Lys 10) at pH 3-10 first increased and then decreased, with the highest gel strength at pH 8, which was due to the deprotonation of carboxyl groups, protonation of amino groups, and β-elimination. These results show that pH plays a key role in both amidation and gelation, with distinct mechanisms, and would provide a basis for the preparation of amidated pectins with excellent gelling properties. This will facilitate their application in the food industry.

Spontaneous gelation behaviors and mechanism of Ficus awkeotsang Makino pectin

Ficus awkeotsang Makino (jelly fig) can produce edible gels by rubbing its seeds in water at room temperature in which pectin is considered as the main gelling component. However, the spontaneous gelation mechanism of Ficus awkeotsang Makino (jelly fig) pectin (JFSP) is still unclear. This study aimed to reveal the structure, physicochemical properties, and spontaneous gelation behaviors and mechanism of JFSP. JFSP was first obtained by water extraction and alcohol precipitation method, with a pectin yield of 13.25 ± 0.42 % (w/w), weight-average molar mass (Mw) of 111.26 kDa, and methoxylation degree (DM) of 26.8 %. Analysis of monosaccharide compositions showed that JFSP was composed of 87.8 % galactose acid, indicating a high percentage of galacturonic acid blocks. Measurement on the gelling capacity suggested that JFSP gels can be easily formed by simply dispersing the pectin in water at room temperature without adding any co-solutes or metal ions. Gelation force analysis indicated that hydrogen bonding, hydrophobic interactions, and electrostatic interactions were the main factors contributing to gel formation. At 1.0 % (w/v) of pectin concentration, JFSP gels exhibited relatively high gel hardness (72.75 ± 1.15 g) and good thermal and freeze-thawing stability. Overall, these findings highlight the potential application of JFSP as a promising commercial pectin resource.

Structural characteristics and gel properties of pectin from citrus physiological premature fruit drop

This study is the first to extract and characterize pectin from citrus physiological premature fruit drop. The extraction yield of pectin reached 4.4 % by acid hydrolysis method. The degree of methoxy-esterification (DM) of citrus physiological premature fruit drop pectin (CPDP) was 15.27 %, indicating it was low-methoxylated pectin (LMP). The monosaccharide composition and molar mass test results showed CPDP was a highly branched macromolecular polysaccharide (β: 0.02, Mw: 2.006 × 10⁵ g/mol) with rich rhamnogalacturonan I domain (50.40 %) and long arabinose and galactose side chain (32.02 %). Based on the fact that CPDP is LMP, Ca²⁺ was used to induce CPDP to form gels. Textural and rheological tests showed that the gel strength and storage modulus of CPDP were higher than commercial citrus pectin (CP) used in this paper due to the lower DM and rich neutral sugar side chains of CPDP. Scanning electron microscope (SEM) results showed CPDP had stable gel network structure.

Green Technologies for Persimmon By-Products Revalorisation as Sustainable Sources of Dietary Fibre and Antioxidants for Functional Beverages Development

The use of green technologies such as ultrasound and natural deep eutectic solvents (NADES) for revalorisation of food and agricultural by-products represents a sustainable way to tackle waste and promote a healthier environment while delivering much-needed functional food ingredients for an increasingly unhealthy population. The processing of persimmon (Diospyros kaki Thunb.) generates large amounts of by-products rich in fibre-bound bioactive phytochemicals. This paper assessed the extractability of bioactive compounds through NADES and the functional properties of the persimmon polysaccharide-rich by-products to evaluate their suitability to be used as functional ingredients in commercial beverages. Although higher amounts of carotenoids and polyphenols were extracted after eutectic treatment vs. conventional extraction (p < 0.05), the fibre-bound bioactives remained abundant (p < 0.001) in the resulting persimmon pulp by-product (PPBP) and persimmon pulp dietary fibre (PPDF), showing also a strong antioxidant activity (DPPH^•, ABTS^•+ assays) and an improved digestibility and fibre fermentability. The main structural components of PPBP and PPDF are cellulose, hemicellulose and pectin. PPDF-added dairy-based drink showed more than 50% of preference over the control among panellists and similar acceptability scores to the commercial ones. Persimmon pulp by-products represent sustainable source of dietary fibre and bioactives and are suitable candidates to develop functional ingredients for food industry applications.

Composition, morphology, interfacial rheology and emulsifying ability of soy hull polysaccharides extracted with ammonium oxalate and sodium citrate as extractants

BACKGROUND

Soy hull, a by-product of crop processing, is rich in pectin-like polysaccharides that have potential for thickening, gelling and emulsifying applications. The effect of ammonium oxalate (SHPA) and sodium citrate (SHPS) on the conformation, physicochemical properties and emulsifying ability of soy hull polysaccharide (SHP) were investigated.

RESULTS

The composition analysis showed that SHPS had more polysaccharide, protein, and higher molecular weight than SHPA. Images of atomic force microscopy (AFM) and scanning electron microscopy (SEM) showed that SHPS molecules appeared spherical bodies with smooth and firm surfaces, while SHPA molecules appeared chain-like bodies with rough and wrinkled surface. At the oil-water interface, SHPS adsorbed faster and formed a more elastic interfacial layer than SHPA. The characterization of the prepared emulsions showed that the SHPS emulsion was a smaller particle size and more stable system within 30 days than SHPA emulsion, especially at the SHPS concentration of 9 mg mL^-1 . Images of cryo-scanning electron microscopy (cryo-SEM) also demonstrated SHPS formed clearer network structure on the surface of the oil droplets, compared to SHPA.

CONCLUSION

Overall, ammonium oxalate and sodium citrate significantly influenced the composition and properties of the SHP. SHPS exhibited a better emulsifying ability than SHPA, which was mainly due to the higher protein content of SHPS and the sodium ion (Na⁺ ) residue of sodium citrate. This study is useful for the extraction and application of SHP and other plant-based polysaccharides. © 2023 Society of Chemical Industry.

Purification, structural characterization and antioxidant activities of two neutral polysaccharides from persimmon peel

Two neutral polysaccharides (PPP1-1 and PPP1-2) were purified from persimmon peel. PPP1-1 (21.84 kDa) was mainly composed of arabinose (22.92 %), galactose (21.09 %), glucose (35.13 %), and xylose (19.09 %), while PPP1-2 (10.42 kDa) mainly contained arabinose (32.98 %), galactose (20.81 %), glucose (26.86 %), xylose (10.46 %), and mannose (7.63 %). Methylation and NMR spectra analysis demonstrated that the backbone of PPP1-1 appeared to be →6)-α-D-Glcp-(1→, →2,6)-α-D-Glcp-(1→, →5)-α-L-Araf-(1→, and →3,5)-α-L-Araf-(1 → residues with branches consisting of →3)-α-L-Araf-(1→, →4)-α-D-Glcp-(1→, →3)-β-D-Galp-(1→, →4)-β-D-Galp-(1→, →4)-β-D-Xylp-(1→, →6)-β-D-Galp-(1→, →4)-β-D-Manp-(1→, and α-L-Araf-(1 → residues. The main chain of PPP1-2 was composed of →6)-α-D-Glcp-(1→, →5)-α-L-Araf-(1→, and →3,5)-α-L-Araf-(1 → residues with branches consisting of →3)-α-L-Araf-(1→, →1,2)-α-D-Glcp-(6→, →4)-α-D-Glcp-(1→, →3)-β-D-Galp-(1→, →4)-β-D-Galp-(1→, →6)-β-D-Galp-(1→, →4)-β-D-Xylp-(1→, →4,6)-α-D-Glcp-(1→, and →4)-β-D-Manp-(1 → residues and terminal of α-L-Araf-(1 → residue. PPP1-2 exhibited stronger antioxidant activities and better thermal stability than PPP1-1. Our results provided the foundation for further investigating the structure and biological activities of persimmon peel polysaccharides and highlighted their potential to become potential antioxidants in functional food.

Extraction optimization and characterization of persimmon peel pectin extracted by subcritical water

•

Persimmon peel pectin (PPP) was extracted by subcritical water.

•

PPP had low M_w of 21.79 kDa and its degree of esterification was 40.61 %.

•

PPP attributed to a degradation temperature of 228.05 ℃.

•

The IC₅₀ of PPP to ABTS•+ was 9.8-times that of commercial citrus pectin in vitro.

•

PPP altered microbial intestinal communities in mice.

Persimmon peel pectin (PPP) was extracted by subcritical water via the response surface methodology. The optimal crude PPP extraction yield of 7.62 ± 0.7 % was found at 138 °C, 2.84 min, and liquid–solid ratio of 1:10.02. After treatment of deproteinization and decolorization with papain and hydrogen peroxide, 83.19 % of protein and 78.56 % of the colour in crude PPP were removed, respectively. PPP owned the M_w of 21.79 kDa and its uronic acids content was 64.03 %. PPP was further affirmed by fourier transform infrared, X-ray diffractometer and ¹H NMR analysis. Moreover, the degradation temperature (228.05 ℃) of PPP was verified via differential scanning calorimetry. Then, the IC₅₀ of PPP to ABTS•+ was 9.8 times that of commercial citrus pectin. Moreover, PPP could change microbial communities and selectively enrich Bacteroides, Cetobacterium, Erysipelatoclostridium, Parabacteroides and Phocaeicola sartorii. This study demonstrated that subcritical water was practicable for extraction of persimmon peel pectin.

Pulsed Vacuum Drying of Persimmon Slices: Drying Kinetics, Physicochemical Properties, Microstructure and Antioxidant Capacity

In order to explore an alternative drying method to enhance the drying process and quality of persimmon slices, pulsed vacuum drying (PVD) was employed and the effects of different drying temperatures (60, 65, 70, and 75 °C) on drying kinetics, color, rehydration ratio (RR), microstructure, bioactive compounds, and the antioxidant capacity of sliced persimmons were investigated in the current work. Results showed that the rehydration ratio (RR) of the samples under PVD was significantly higher than that of the traditional hot air-dried ones. Compared to the fresh samples, the dried persimmon slices indicated a decrease in the bioactive compounds and antioxidant capacity. The total phenolic content (TPC) of PVD samples at 70 °C was 87.96% higher than that of the hot air-dried persimmon slices at 65 °C. Interestingly, at 70 °C, the soluble tannin content and TPC of the PVD samples reached the maximum values of 6.09 and 6.97 mg GAE/g, respectively. The findings in the current work indicate that PVD is a promising drying method for persimmon slices as it not only enhances the drying process but also the quality attributes.

Extraction and characterization of a pectin from sea buckthorn peel

Sea buckthorn peel is the by-product of the sea buckthorn processing, which contains many bioactive compounds. In this paper, sea buckthorn high methoxyl pectin (SBHMP) was obtained, with a yield of 8% and a light-colored. The SBHMP was a high methoxyl with a degree of esterification of 57.75% and uronic acid content of 65.35%. The structural and morphological characterization of SBHMP were analyzed by high-performance liquid chromatography, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Results showed that SBHMP presented a sheet and layered stacked morphological, and was mainly composed of galacturonic acid, arabinose, galactose, rhamnose, and mannose, which indicated that SBHMP mainly consisted of homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) type pectin polysaccharides. In addition, SBHMP also presented significant gel, thickening, and emulsifying properties. The results exhibited that SBHMP could form jelly-like gels under acid and high sucrose conditions, presenting a shear-thinning behavior and increasing apparent viscosity with the enhancement of pectin and sucrose contents. Besides, SBHMP could form oil-in-water emulsions with pectin concentrations of 1.0–3.0%. When the SBHMP concentrations were 2.0 and 3.0%, the emulsions were stable during 7 days of storage. Findings in this paper demonstrated the potential of SBHMP to be a food thickener and emulsifier and support the in-depth utilization of sea buckthorn by-products.

Utilisation of Pectins Extracted from Orange Peels by Non Conventional Methods in the Formation of Edible Films in the Presence of Herbal Infusions

Edible films of three high methoxy pectins (DE: 70–75%) in the presence of dittany and anise infusions were studied. Apart from a commercial one, two more pectins, selected by their yield and DE from preliminary experiments on pectin extraction from orange peels using ultrasound- and microwave-assisted extraction or a combination of both, were used. Extracted pectins were darker, less surface active and had lower [η] and absolute zeta values. All three pectin solutions were Newtonian. Furthermore, all films had statistically the same thickness (~40 μm) and moisture content (~25.2%). For the same herbal infusion, all pectins resulted in films with the same density (~1.01 and ~1.19 g/cm3 for dittany and anise films, respectively). Values of 2–4.65 N and 76.62–191.80 kPa, for maximum force and modulus, respectively, were reported. The commercial pectin film with anise was the stronger, whereas that with dittany, the stiffer. Total phenolics content (TPC) and antioxidant activity (SA) were also measured for films and film-forming solutions (FFS). TPC values ranged from 0.035 to 0.157 mg GAE/0.5 mL and SA from ~62 to 91%. Films had greater TPC but lower SA than their FFS. The presence of both pectin and herbal infusions were significant for our observations.

New valorization approach of Algerian dates (Phoenix dactylifera L.) by ultrasound pectin extraction: Physicochemical, techno-functional, antioxidant and antidiabetic properties

To exploit the great fortune of date fruits, the current study aimed to valorize an Algerian common variety by extracting pectins. Response surface methodology (RSM) was applied as process optimization tool to achieve the highest yield using ultrasound-assisted extraction (UAE) as compared to conventional acid extraction (CAE). The experimental yield value (6.7%) was well matched with the predicted one (6.6%) at the optimum conditions (60 °C, 90 min, pH 1.5), confirming the validity of the model. The evaluation of the monomeric composition showed higher content of galacturonic acid and lower of neutral sugars in UAE pectin, as compared to CAE pectin. Conventional treatments decreased the molecular weight (Mw) of the extracted pectins (539 kDa) in a higher extent than ultrasound treatment (800 kDa). Fourier-Transform Infrared Spectroscopy (FT-IR) spectral analysis showed that both samples were low-methoxyl pectins. CAE gave rise to pectins with slightly upper technological samples in terms of water and oil holding capacity (5.2 and 3.8 g/g, respectively), and emulsifying activity (38.5 m²/g). Moreover, date pectins obtained by UAE presented enhanced antioxidant activity (24.3 and 61.0 mg/g DW for DPPH and FRAP assays, respectively), and in vitro antidiabetic properties, showing higher glucose adsorption capacity (4 mmol g^-1 at 200 min), as well as α-amylase inhibition (73.7%) and potential capacity to decrease glucose diffusion (1.4 mmol mM g^-1 at 150 min), which could improve the ability to retard starch digestion (0.1 mmol mM g-1 at 150 min), providing potential health-promoting properties.

The effect of sonication-synergistic natural deep eutectic solvents on extraction yield, structural and physicochemical properties of pectins extracted from mango peels

In this study, eco-friendly deep eutectic solvents (DESs) were used as extracting agents for the first time in the extraction of pectins from mango peel. Two novel green solvents including betaine-citric acid (Bet-CA) and choline chloride-malic acid (ChCl-MaA) were screened, and the extraction conditions were further optimized by full factor design experimental along with RSM. In addition, ultrasound treatment also had an influence on extraction yield, structural and physicochemical properties of extracted pectins. Two DES-extracted pectins had significantly higher yield, larger molecular weight and particles size than HCl-extracted pectin. High intensity ultrasound power enhanced the yield of low-ester pectins, but decreased the molecular weight and particles size of the pectins extracted. Monosaccharide compositions analysis showed that higher content of galacturonic acid (GalA) and larger HG region were observed in two DESs-extracted pectins. Fourier transform infrared spectra (FT-IR) of all pectins extracted were similar, with slight differences. Two DESs-extracted pectins exhibited higher DE values than HCl-extracted pectin. Thermal analysis and zeta potential results showed that HCl-extracted pectin had better stability than ChCl-MaA-extracted pectin. Additionally, HCl-extracted pectin had higher viscosity properties than two DESs-extracted pectins or commercial pectin (CP). Moreover, it was found that HCl-extracted pectin was in a colloid state, while two DESs-extracted pectins or CP were in a flow state. Ultrasound treatment significantly improved the yields of pectin/low-ester pectin. Additionally, ultrasound treatment remarkably decreased the viscosity and viscoelastic properties of the pectins extracted. The results were conducive to our understanding of the relationship between extraction conditions and physicochemical properties of the pectins extracted, which provides theoretical basis for the functional application of mango peel pectins in the food and pharmaceutical industry.

Physicochemical, structural and rheological properties of pectin isolated from citrus canning processing water

In order to better utilize the citrus pectin (CP) resource, the crude citrus pectin (CCP), obtained from the citrus fruit canning processing waste water, was purified by cellulose DEAE-52 column, providing neutral polysaccharide CP0 and two acidic polysaccharides (CP1 and CP3). CP1 had the highest yield among the three fractions, being 44.29%. The chemical composition, structure and morphology of these pectin components were analyzed. Monosaccharide composition analysis revealed that arabinose was the most abundant composition in these pectin samples. CCP, CP1 and CP3 were mainly composed of rhamnogalacturonan-I (RG-I) regions. Compared with CP3, CCP and CP1 had longer side chains, which are mainly consisted of arabinose. FT-IR and NMR analysis indicated that α-type glycosidic bonds are the main linkage in the four pectin components. These CP samples were found to possess different conformation, but no triple-helical conformation was observed in all these CP fractions. Scanning electron microscopy revealed that CCP, CP1 and CP3 all had irregular sheet-like structures and partly porous structures. The four pectin components showed the characteristics of non-Newtonian fluids and possessed good viscoelasticity. Due to these properties, the pectin might have potential application in food industry as food thickening agent.