Sustainable preparation of surface functionalized cellulose nanocrystals and their application for Pickering emulsions

Cellulose and lignin nanoparticles from an Ayurvedic waste stream for essential oil-based active packaging to extend shelf life of strawberries

Cellulose and lignin nanoparticles (NCP and LNP) were successfully extracted from Dashamoola spent material (DSM), a residue from an Ayurvedic decoction. NCP had a particle size of 493.6 nm and a zeta potential of -30.9 mV, indicating good colloidal stability. FTIR confirmed the removal of non-cellulosic components, while TGA demonstrated thermal stability, with major degradation between 260 °C and 350 °C. A semi-crystalline structure of nanocellulose was indicated via XRD analysis. Oil-in-water emulsions of tea tree oil (TTO) were prepared using NCP (C at 4 %), LNP (L at 4 %), and a combination blend (2 % each of C and L in CL_TTO), with 16 % TTO, all in w/v. Among these, CL_TTO emulsions had the smallest particle size and highest stability. PVOH-based films, prepared with a 4 % w/v mixture of CL_TTO emulsion, PVOH, and glycerol, demonstrated improved tensile strength, Young's modulus, water vapour barrier properties, and water repellence. These films blocked 95 % UV transmittance, providing appreciable protection to light-sensitive products. PVOH-CL_TTO films also exhibited strong antioxidant activity (85 % DPPH scavenging) and antimicrobial property against E. coli. These films extended the shelf life of strawberries by preserving lightness, firmness, and pH for 14 days under chilling (4 °C). These findings highlight the potential of NCP and LNP obtained from DSM for producing sustainable active packaging which would valorizing Ayurvedic waste stream.

Formic-oxalic synergy unlocks bamboo nanocellulose with high-thermal-stability and superior dispersion

Nanocellulose is among the most promising sustainable materials, with the potential to replace petroleum-based counterparts. However, its application process is often hindered by challenges related to reduced thermal stability and dispersibility. We firstly devised a novel strategy for preparing bamboo cellulose nanocrystals (CNCs) via the synergistic catalysis of formic acid and oxalic acid. Meanwhile, we conducted a comparative study on the thermal and dispersion stabilities of bamboo nanocellulose prepared by multiple methods, including mechanical, sulfuric acid, formic acid, oxalic acid and citric acid ones. The initial decomposition temperature of CNC prepared by this new method can reach 308.1 °C, and the maximum thermal decomposition temperature can reach 344.1 °C. The findings demonstrate that the high thermal stability of bamboo nanocellulose is primarily attributed to the ester groups grafted onto the cellulose-OH groups. Furthermore, the simultaneous introduction of carboxyl groups makes the CNCs exhibit an exceptional zeta potential of -43.87 mV, indicating excellent dispersion stability. The study underscores the critical role of surface ester group content in determining the thermal property of nanocellulose. Overall, the development of high-performance nanocellulose has been developed, contributing to the expanded application of nanocellulose in bio-based composites.

Corn Stover-derived nanocellulose and lignin-modified particles: Pickering emulsion stabilizers and potential quercetin sustained-release carriers

Pickering emulsions (PEs) have wide applications in delivering nutraceuticals. However, the impact of extracting nanocellulose from corn stover on stabilizing PEs and delivering nutraceuticals remains unclear. In this study, four types of nanocellulose, cellulose nanocrystals (CNC), cellulose nanofibers (CNF), lignin-containing cellulose nanocrystals (LCNC), and lignin-containing cellulose nanofibers (LCNF) were successfully prepared from corn stover, an agricultural waste. Among them, LCNC and LCNF exhibited stable reticulated microstructures, lower crystallinity, and excellent thermal stability. Besides, lignin enhanced the nanoparticles' hydrophobicity, promoting the formation of more ideally amphiphilic particles, resulting in denser emulsions at the oil-water interface. Furthermore, emulsions stabilized by LCNC and LCNF demonstrated remarkable resistance to quercetin degradation under UV light exposure (with residual level exceeding 90 %) and improved quercetin's bioaccessibility during the in vitro digestion tests, achieving the highest bioaccessibility of 48.3 %. This study provided an innovative perspective on utilizing stover-derived materials for stabilizing PEs and delivering lipophilic nutrients.

Lignin-containing cellulose nanocrystals from maple leaves: A natural Pickering emulsion stabilizer for food preservation

Cellulose nanocrystals have been obtained from maple leaves for stabilizing Pickering emulsions, but a chemical modification is required to improve hydrophobicity and the yield is relatively low due to the removal of non-cellulose components. Herein, lignin was retained while isolating cellulose from maple leaves, and the prepared lignin-containing cellulose nanocrystals (LCNCs) were applied as natural Pickering emulsion stabilizers. Rod-like shaped LCNCs with tunable lignin contents had suitable hydrophobicity and high aspect ratios, resulting in long-term stability of LCNC-stabilized Pickering emulsions. The obtained emulsions provided good encapsulation and protection of cinnamaldehyde, and the controlled release of cinnamaldehyde promoted sustained antibacterial efficacy. Both direct-contact and non-contact preservation modes were investigated for shrimp preservation, where headspace release of cinnamaldehyde from emulsions at non-contact mode was more effective in inhibiting bacterial proliferation compared to direct-contact (spray-coating) mode. This work demonstrates the feasibility of developing value-added LCNCs from maple leaves as sustainable Pickering emulsion stabilizers.

High thermal conductive and photothermal phase change material microcapsules via cellulose nanocrystal stabilized Pickering emulsion for solar harvesting and thermal energy storage

Phase change materials (PCMs) are promising for thermal energy storage due to their high latent enthalpy and constant phase change temperature. However, organic PCMs suffer from leaking, low thermal conductivity, and flammability. Herein, high thermal conductivity, photothermal and flame-proof docosane microcapsules with melamine-formaldehyde (MF) and polypyrrole (PPy) (C22-CMFP) were reported with cellulose nanocrystal (CNC) stabilized Pickering emulsion droplets as templates through in-situ polymerization. CNCs showed outstanding C22 Pickering emulsifying ability with the presence of NaCl and provided ideal templates for C22 microcapsules. The obtained C22-CMFP microcapsules displayed high enthalpy (205.7 J/g), C22 core ratio (86.1 %), and stability. The C22-CMFP microcapsules retained an outstanding enthalpy remaining ratio (98.9 %) after 100 times cooling/heating cycles and could tolerate 100 °C for 12 h without leaking due to the robust hybrid CMFP shell. PPy significantly improved the thermal conductivity and photothermal conversion efficiency of C22-CMFP microcapsules. The C22-CMFP microcapsules exhibited a high thermal conductivity of 0.683 W/(m·K). The maximum temperature of C22-CMFP microcapsules under light irradiation for 18 min was 60.4 °C. Moreover, C22-CMFP microcapsules showed superb flame-proof properties. This study provides a facile approach to fabricate high enthalpy, stable, thermal conductive, photothermal, and flame-proof PCM microcapsules for solar harvesting and thermal energy storage.

Multifunctional composite film of curcumin Pickering emulsion stabilized by lignocellulose nanofibrils isolated from bamboo shoot shells for monitoring shrimp freshness

Concerns about food safety and environmental impact from chemical surfactants have prompted interest in natural lignocellulosic materials as alternatives. In this study, we combined hydrated deep eutectic solvent (DES) pretreatment with ultrasound treatment to prepare lignocellulosic nanofibrils (LCNF) from bamboo shoot shells with appropriate surface properties for stabilizing Pickering emulsions. The pretreatment intensity effectively modulated the surface characteristics of LCNF, achieving desirable wettability through lignin retention and in-situ esterification. The resulting LCNF/curcumin Pickering emulsion (CPE) demonstrated curcumin protection and pH-responsive color changes, while the ensuing CPE/PVA composite film exhibited ultraviolet shielding, mechanical strength, oxygen barrier, and antioxidant properties. Furthermore, the CPE/PVA film showed promise as a real-time indicator for monitoring shrimp freshness, maintaining sensitivity to spoilage even after six months of storage. These findings advance the advancement of green LCNF technologies, providing eco-friendly solutions for valorizing bamboo shoot shells and enhancing the application of LCNF in Pickering emulsions.

Cellulose-derived raw materials towards advanced functional transparent papers

Pulp and paper are gradually transforming from a traditional industry into a new green strategic industry. In parallel, cellulose-derived transparent paper is gaining ground for the development of advanced functional materials for light management with eco-friendly, high performance, and multifunctionality. This review focuses on methods and processes for the preparation of cellulose-derived transparent papers, highlighting the characterization of raw materials linked to responses to different properties, such as optical and mechanical properties. The applications in electronic devices, energy conversion and storage, and eco-friendly packaging are also highlighted with the objective to showcase the untapped potential of cellulose-derived transparent paper, challenging the prevailing notion that paper is merely a daily life product. Finally, the challenges and propose future directions for the development of cellulose-derived transparent paper are identified.

Carbon-based single-atom catalysts derived from biomass: Fabrication and application

Single-atom catalysts (SACs) with active metals dispersed atomically have shown great potential in heterogeneous catalysis due to the high atomic utilization and superior selectivity/stability. Synthesis of SACs using carbon-neutral biomass and its components as the feedstocks provides a promising strategy to realize the sustainable and cost-effective SACs preparation as well as the valorization of underused biomass resources. Herein, we begin by describing the general background and status quo of carbon-based SACs derived from biomass. A detailed enumeration of the common biomass feedstocks (e.g., lignin, cellulose, chitosan, etc.) for the SACs preparation is then offered. The interactions between metal atoms and biomass-derived carbon carriers are summarized to give general rules on how to stabilize the atomic metal centers and rationalize porous carbon structures. Furthermore, the widespread adoption of catalysts in diverse domains (e.g., chemocatalysis, electrocatalysis and photocatalysis, etc.) is comprehensively introduced. The structure-property relationships and the underlying catalytic mechanisms are also addressed, including the influences of metal sites on the activity and stability, and the impact of the unique structure of single-atom centers modulated by metal/biomass feedstocks interactions on catalytic activity and selectivity. Finally, we end this review with a look into the remaining challenges and future perspectives of biomass-based SACs. We expect to shed some light on the forthcoming research of carbon-based SACs derived from biomass, manifestly stimulating the development in this emerging research area.

Green and facile fabrication of multifunctional cellulose nanocrystal and carvacrol together reinforced chitosan bio-nanocomposite coatings for fruit preservation

The continuous development of sustainable food-active packaging materials and practices with high performance is a response to the increasing challenges posed by microbial food safety and environmental contamination. In this study, a multifunctional bio-nanocomposite composed primarily of chitosan, cellulose nanomaterials and carvacrol was proposed as a conformal coating for fruit preservation. The coating exhibits excellent antioxidant and antibacterial activities owing to the incorporation of the carvacrol. The inhibition rate of the coating on E. coli and S. aureus is enhanced by 57.13 % and 62.18 %, respectively. And its antioxidant activities is also improved by 77.45 %. In addition, the oxygen permeability (OP) and water vapor permeability (WVP) of this CS/CNC coating are significantly lowered by 67 % and 46 %, respectively, comparing with the CS coating. The coating exhibited excellent biosafety and cytocompatibility because of over 90 % of the HepG2 cells remained alive in each concentration of the coating after 24 h incubation. Additionally, the efficacy of the coating in prolonging the freshness and visual appeal of perishable fruits is substantiated by the experiment involving two fruit specimens. Furthermore, the coating's ease of production, ingestibility, washability, and utilization of cost-effective and easily accessible biomaterials, including renewable waste materials, indicate its potential as a viable economic substitute for commercially accessible fruit coatings.

Preparation and functionalization of cellulose nanofibers using a naturally occurring acid and their application in stabilizing linseed oil/water Pickering emulsions

Finding efficient and environmental-friendly methods to produce and chemically modify cellulose nanofibers (CNFs) remains a challenge. In this study, lactic acid (LA) treatment followed by microfluidization was employed for the isolation and functionalization of CNFs. Small amounts of HCl (0.01, 0.1, and 0.2 M) were used alongside LA to intensify cellulose hydrolysis. FTIR spectroscopy and solid-state 13C NMR confirmed the successful functionalization of CNFs with lactyl groups during isolation, while SEM, AFM, and rheological tests revealed that the addition of HCl governed the fibers' sizes and morphology. Notably, the treatment with LA and 0.2 M HCl resulted in a more efficient defibrillation, yielding smaller nanofibers sizes (62 nm) as compared to the treatment with LA or HCl alone (90 and 108 nm, respectively). The aqueous suspension of CNFs treated with LA and 0.2 M HCl showed the highest viscosity and storage modulus. LA-modified CNFs were tested as stabilizers for linseed oil/water (50/50 v/v) emulsions. Owing to the lactyl groups grafted on their surface and higher aspect ratio, CNFs produced with 0.1 and 0.2 M HCl led to emulsions with increased stability (a creaming index increase of only 3 % and 1 %, respectively, in 30 days) and smaller droplets sizes of 23.4 ± 1.2 and 35.5 ± 0.5 μm, respectively. The results showed that LA-modified CNFs are promising stabilizers for Pickering emulsions.

Nanocellulose-graphene composites: Preparation and applications in flexible electronics

In recent years, the pursuit of high-performance nano-flexible electronic composites has led researchers to focus on nanocellulose-graphene composites. Nanocellulose has garnered widespread interest due to its exceptional properties and unique structure, such as renewability, biodegradability, and biocompatibility. However, nanocellulose materials are deficient in electrical conductivity, which limits their applications in flexible electronics. On the other hand, graphene boasts remarkable properties, including a high specific surface area, robust mechanical strength, and high electrical conductivity, making it a promising carbon-based nanomaterial. Consequently, research efforts have intensified in exploring the preparation of graphene-nanocellulose flexible electronic composites. Although there have been studies on the application of nanocellulose and graphene, there is still a lack of comprehensive information on the application of nanocellulose/graphene in flexible electronic composites. This review examines the recent developments in nanocellulose/graphene flexible electronic composites and their applications. In this review, the preparation of nanocellulose/graphene flexible electronic composites from three aspects: composite films, aerogels, and hydrogels are first introduced. Next, the recent applications of nanocellulose/graphene flexible electronic composites were summarized including sensors, supercapacitors, and electromagnetic shielding. Finally, the challenges and future directions in this emerging field was discussed.

Ultrastable High Internal Phase Pickering Emulsions: Forming Mechanism, Processability, and Application in 3D Printing

High internal phase Pickering emulsions (HIPPEs) are versatile platforms for various applications owing to their low-density, solid-like structure, and large specific surface area. Here, naturally occurring polysaccharide-protein hybrid nanoparticles (PPH NPs) were used to stabilize HIPPEs with an internal phase fraction of 80% at a PPH NP concentration of 1.5%. The obtained HIPPEs displayed a gel-like behavior with excellent stability against centrifugation (10000g, 10 min), temperature (4-121 °C), pH (1.0-11.0), and ionic strength (0-500 mM). Confocal laser scanning microscope and cryo-scanning electron microscopy results showed that PPH NPs contributed to the stability of HIPPEs by effectively adsorbing and anchoring on the surface of the emulsion droplets layer by layer to form a dense 3D network barrier to inhibit droplet coalescence. The rheological analysis showed that the HIPPEs possessed a higher viscosity and lower frequency dependence with increasing PPH NP concentration, suggesting the potential application of such HIPPEs in three-dimensional (3D) printing, which was subsequently confirmed by a 3D printing experiment. This work provides highly stable and processable HIPPEs, which can be developed as facile and reusable materials for numerous applications. They can also be directly used for future food manufacturing, drug and nutrient delivery, and tissue reconstruction.

Properties of Pickering emulsions stabilized by cellulose nanocrystals extracted from litchi peels

The development of Pickering emulsions which are applicable to the food industry still remains challenges due to the limited availability for biocompatible, edible and natural emulsifiers. The purpose of this study was to extract cellulose nanocrystals from litchi peels (LP-CNCs), and evaluate their emulsifying properties. The results showed that the LP-CNCs were needle-like and they possessed high crystallinity (72.34 %) and aspect ratio. When the concentrations of LP-CNCs were >0.7 wt% or the contents of oil were no >0.5, stable Pickering emulsions were obtained. The microstructures of emulsions confirmed that LP-CNCs formed dense interfacial layers on the surface of oil droplets, which functioned as barriers to prevent aggregation and flocculation among droplets. Rheological results showed that the emulsions exhibited typical shear thinning behavior. The elastic of emulsions was dominant, and their gel strength could be enhanced by regulating the contents of emulsifiers or oil. Additionally, the Pickering emulsions stabilized by LP-CNCs showed extremely high pH, ionic strength, and temperature tolerance. This strategy provides an innovative alternative to tackle the dilemma of preparing highly stable Pickering emulsions using natural particles in food products.

The catalytic hydrodeoxygenation of bio-oil for upgradation from lignocellulosic biomass

The increasing depletion of oil resources and the environmental problems caused by using much fossil energy in the rapid development of society. The bio-oil becomes a promising alternative energy source to fossil. However, bio-oil cannot be directly utilized, owing to its high proportion of oxygenated compounds with low calorific value and poor thermal stability. Catalytic hydrodeoxygenation (HDO) is one of the most effective methods for refining oxygenated compounds from bio-oil. HDO catalysts play a crucial role in the HDO reaction. This review emphasizes the description of the main processing of HDO and various catalytic systems for bio-oil, including noble/non-noble metal catalysts, porous organic polymer catalysts, and polar solvents. A discussion based on recent studies and evaluations of different catalytic materials and mechanisms is considered. Finally, the challenges and future opportunities for the development of catalytic hydrodeoxygenation for bio-oil upgradation are looked forward.

Green remediation of cadmium-contaminated soil by cellulose nanocrystals

Cellulose nanocrystals (CNC) were used as a novel, green eluent to remediate Cd-contaminated soil in this study. The influence of washing conditions on the removal of Cd, including CNC concentration, pH value, liquid/solid (L/S) ratio, contact time and temperature were investigated. The effect of CNC remediation of Cd-contaminated soil on soil health and the possible remediation mechanism were also explored. The results showed that CNC concentration, pH value and contact time had a significant effect on the removal efficiency of Cd. CNC rapidly removed heavy metals in soil within 30 min. When the pH value of the eluent was 9.0, the removal efficiency of Cd could reach 86.3 %. The eluent mainly removed exchangeable and reducible fractions of Cd, which could effectively reduce the bioavailability of heavy metals. CNC washing had no negative effects on seed growth, species abundance and Shannon index. C-O, -COO^- groups on CNC played an important role in the reaction between CNC and soil Cd, and other oxygen-containing functional groups on CNC could also assist in adsorption, ion exchange and chemical complexation processes. Therefore, cellulose nanocrystals had the potential to remediate heavy metal-contaminated soils in a green and efficient manner.

Hemicellulose-based hydrogels for advanced applications

Hemicellulose-based hydrogels are three-dimensional networked hydrophilic polymer with high water retention, good biocompatibility, and mechanical properties, which have attracted much attention in the field of soft materials. Herein, recent advances and developments in hemicellulose-based hydrogels were reviewed. The preparation method, formation mechanism and properties of hemicellulose-based hydrogels were introduced from the aspects of chemical cross-linking and physical cross-linking. The differences of different initiation systems such as light, enzymes, microwave radiation, and glow discharge electrolytic plasma were summarized. The advanced applications and developments of hemicellulose-based hydrogels in the fields of controlled drug release, wound dressings, high-efficiency adsorption, and sensors were summarized. Finally, the challenges faced in the field of hemicellulose-based hydrogels were summarized and prospected.

Nanocellulose/two dimensional nanomaterials composites for advanced supercapacitor electrodes

With the emerging of the problems of environmental pollution and energy crisis, the development of high-efficiency energy storage technology and green renewable energy is imminent. Supercapacitors have drawn great attention in wearable electronics because of their good performance and portability. Electrodes are the key to fabricate high-performance supercapacitors with good electrochemical properties and flexibility. As a biomass based derived material, nanocellulose has potential application prospects in supercapacitor electrode materials due to its biodegradability, high mechanical strength, strong chemical reactivity, and good mechanical flexibility. In this review, the research progress of nanocellulose/two dimensional nanomaterials composites is summarized for supercapacitors in recent years. First, nanocellulose/MXene composites for supercapacitors are reviewed. Then, nanocellulose/graphene composites for supercapacitors are comprehensively elaborated. Finally, we also introduce the current challenges and development potential of nanocellulose/two dimensional nanomaterials composites in supercapacitors.