Noble metal-free CeO 2 -based mixed oxides for CO and soot oxidation

Two decades of ceria nanoparticle research: structure, properties and emerging applications

Cerium oxide nanoparticles (CeNPs) are versatile materials with unique and unusual properties that vary depending on their surface chemistry, size, shape, coating, oxidation states, crystallinity, dopant, and structural and surface defects. This review encompasses advances made over the past twenty years in the development of CeNPs and ceria-based nanostructures, the structural determinants affecting their activity, and translation of these distinct features into applications. The two oxidation states of nanosized CeNPs (Ce3+/Ce4+) coexisting at the nanoscale level facilitate the formation of oxygen vacancies and defect states, which confer extremely high reactivity and oxygen buffering capacity and the ability to act as catalysts for oxidation and reduction reactions. However, the method of synthesis, surface functionalization, surface coating and defects are important factors in determining their properties. This review highlights key properties of CeNPs, their synthesis, interactions, and reaction pathways and provides examples of emerging applications. Due to their unique properties, CeNPs have become quintessential candidates for catalysis, chemical mechanical planarization (CMP), sensing, biomedical applications, and environmental remediation, with tremendous potential to create novel products and translational innovations in a wide range of industries. This review highlights the timely relevance and the transformative potential of these materials in addressing societal challenges and driving technological advancements across these fields.

Soot Erased: Catalysts and Their Mechanistic Chemistry

Soot formation is an inevitable consequence of the combustion of carbonaceous fuels in environments rich in reducing agents. Efficient management of pollution in various contexts, such as industrial fires, vehicle engines, and similar applications, relies heavily on the subsequent oxidation of soot particles. Among the oxidizing agents employed for this purpose, oxygen, carbon dioxide, water vapor, and nitrogen dioxide have all demonstrated effectiveness. The scientific framework of this research can be elucidated through the following key aspects: (i) This review situates itself within the broader context of pollution management, emphasizing the importance of effective soot oxidation in reducing emissions and mitigating environmental impacts. (ii) The central research question of this study pertains to the identification and evaluation of catalysts for soot oxidation, with a specific emphasis on ceria-based catalysts. The formulation of this research question arises from the need to enhance our understanding of catalytic mechanisms and their application in environmental remediation. This question serves as the guiding principle that directs the research methodology. (iii) This review seeks to investigate the catalytic mechanisms involved in soot oxidation. (iv) This review highlights the efficacy of ceria-based catalysts as well as other types of catalysts in soot oxidation and elucidate the underlying mechanistic strategies. The significance of these findings is discussed in the context of pollution management and environmental sustainability. This study contributes to the advancement of knowledge in the field of catalysis and provides valuable insights for the development of effective strategies to combat air pollution, ultimately promoting a cleaner and healthier environment.

Evolution hydrothermal aging mechanism for Ag/CeO2 catalysts in regeneration of catalytic diesel particulate filter with DFT calculation

In order to avoid the high cost of existing precious metal catalyst like Pt, Ag/CeO₂ was the most promising catalysts for mobile source soot emission control technologies, but there was a clear trade-off between hydrothermal aging resistance and catalytic oxidation performance hindered the application of this catalyst. In order to reveal the hydrothermal aging mechanism of Ag/CeO₂ catalysts, the TGA (thermogravimetric analysis) experiments were investigated to reveal the mechanism of Ag modification on catalytic activity of CeO₂ catalyst between fresh and hydrothermal aging and were also characterized with the related characterization experiments to in-depth research the lattice morphology and valence changes. The degradation mechanism of Ag/CeO₂ catalysts in vapor with high-temperature was also explained and demonstrated based on density functional and molecular thermodynamics theories. The experimental and simulation data showed that the catalytic activity of soot combustion within Ag/CeO₂ decreased more significantly after hydrothermal aging than CeO₂ due to the less agglomerated, which caused by the decreased in O_II/O_I and Ce³⁺/Ce⁴⁺ compared with CeO₂. As shown in density function theory (DFT) calculation, the decreased surface energy and the increased oxygen vacancy formation energy of the low Mille index surface after Ag modification led to the instability structure and the high catalytic activity. Ag modification also increased the adsorption energy and Gibbs free energy of H₂O on the low Miller index surface compared to CeO₂, indicating that the desorption temperature of H₂O molecules in (1 1 0) and (1 0 0) was higher than (1 1 1) in CeO₂ and Ag/CeO₂, which led to the migration of (1 1 1) crystal surfaces to (1 1 0) and (1 0 0) in the vapor environment. These conclusions can provide a valuable addition to the regenerative application of Ce-based catalysts in diesel exhaust aftertreatment system the aerial pollution.

Au Nanoparticles Supported on Iron-Based Oxides for Soot Oxidation: Physicochemical Properties Before and After the Reaction

The catalytic performance of Au nanoparticles (NPs) supported on different transition-metal oxides for soot oxidation was studied in this paper. The changes in the morphology, phase structure, and physicochemical properties of Au-supported iron-based oxides before and after the reaction with soot particles were observed by high-resolution transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and temperature-programed reduction. It was found that the catalytic activity of Fe₃O₄, Fe₂O₃, Co₃O₄, and NiO for soot oxidation was significantly improved after loading Au NPs. Especially, under the action of Au/Fe₂O₃ and Au/Fe₃O₄, the oxidation of soot was close to 20% below 420 °C, and their T ₁₀ values were 73 and 50 °C, respectively. When Au/Fe₂O₃ and Au/Fe₃O₄ reacted with soot, the size of the catalysts increased, and the active oxygen and Fe 2p components decreased. Au promoted the reduction of iron ions to a lower temperature, which was beneficial to improving the oxidation performance of iron-based oxides.

Experimental Evaluation on the Catalytic Activity of a Novel CeZrK/rGO Nanocomposite for Soot Oxidation in Catalyzed Diesel Particulate Filter

A nanostructured solid solution catalyst CeZrK/rGO for soot oxidation in catalyzed diesel particulate filter was synthesized using the dipping method. The reduced graphene oxide (rGO) was used as the catalyst carrier, and CeO2, ZrO2, and K2O were mixed with the molar ratio of 5:1:1, 5:2:2 and 5:3:3, which were referred to as Ce5Zr1K1/rGO, Ce5Zr2K2/rGO, and Ce5Zr3K3/rGO, respectively. The structure, morphology and catalytic activity of the CeZrK/rGO nanocomposites were thoroughly investigated and the results show that the CeZrK/rGO nanocomposites have nanoscale pore structure (36.1–36.9 nm), high-dispersion quality, large specific surface area (117.2–152.4 m2/g), small crystallite size (6.7–8.3 nm), abundant oxygen vacancies and superior redox capacity. The 50% soot conversion temperatures of Ce5Zr1K1/rGO, Ce5Zr2K2/rGO, and Ce5Zr3K3/rGO under tight contact condition were decreased to 352 °C, 339 °C and 358 °C respectively. The high catalytic activity of CeZrK/rGO nanocomposites can be ascribed to the following factors: the doping of Zr and K ions causes the nanocrystalline phase formation in CeZrK solid solutions, reduces the crystallite size, generates abundant oxygen vacancies and improves redox capacity; the rGO as a carrier provides a large specific surface area, thereby improving the contact between soot and catalyst.

Synergistic Effect of Simultaneous Doping of Ceria Nanorods with Cu and Cr on CO Oxidation and NO Reduction

Ceria particles play a key role in catalytic applications such as automotive three-way catalytic systems in which toxic CO and NO are oxidized and reduced to safe CO2 and N2 , respectively. In this work, we explore the incorporation of Cu and Cr metals as dopants in the crystal structure of ceria nanorods prepared by a single-step hydrothermal synthesis. XRD, Raman and XPS confirm the incorporation of Cu and Cr in the ceria crystal lattices, offering ceria nanorods with a higher concentration of oxygen vacancies. XPS also confirms the presence of Cr and Cu surface species. H2 -TPR and XPS analysis show that the simultaneous Cu and Cr co-doping results in a catalyst with a higher surface Cu concentration and a much-enhanced surface reducibility, in comparison with either undoped or singly doped (Cu or Cr) ceria nanorods. While single Cu doping enhances catalytic CO oxidation and Cr doping improves catalytic NO reduction, co-doping with both Cu and Cr enhances the benefits of both dopants in a synergistic manner employing roughly a quarter of dopant weight.

Effect of Different Aging Conditions on the Soot Oxidation by Thermogravimetric Analysis

Diesel particulate filter is an effective device to reduce diesel particulate emission. The particles in diesel particulate filter are usually affected by the aging of high-temperature exhaust gas before the regeneration process. In order to investigate the effect of aging conditions on the soot oxidation process, the effect of aging temperature and aging time on the oxidation process of carbon black (Printex-U, PU) and the PU/catalyst/ash mixture are studied by thermogravimetric analysis. The aging PU particles have lower starting temperature, peaking temperature, ending temperature, and activation energy. Compared with the particles without aging, the PU particles with a 400 °C aging temperature and 20 h aging time are able to reduce the activation energy from 191.2 to 158 kJ/mol. Low aging temperatures (200-300 °C) and the catalyst have a certain synergistic effect on the improvement of PU oxidation activity. The PU/CeO2 mixture with a 300 °C aging temperature and 20 h aging time decreases the activation energy from 178.4 to the lowest 113.6 kJ/mol. The addition of CaSO4 in PU particles cannot stop the improvement of its oxidation activity by aging, but it reduces the effect of aging. This work is helpful to reveal the mechanism of aging on PU and the PU/catalyst/ash mixture in air environment.

Influence of Nanoscale Surface Arrangements on the Oxygen Transfer Ability of Ceria–Zirconia Mixed Oxide

Ceria-based materials, and particularly CeO2–ZrO2 (CZ) solid solutions are key ingredient in catalyst formulations for several applications due to the ability of ceria to easily cycling its oxidation state between Ce4+ and Ce3+. Ceria-based catalysts have a great soot oxidation potential and the mechanism deeply relies on the degree of contact between CeO2 and carbon. In this study, carbon soot has been used as solid reductant to better understand the oxygen transfer ability of ceria–zirconia at low temperatures; the effect of different atmosphere and contact conditions has been investigated. The difference in the contact morphology between carbon soot and CZ particles is shown to strongly affect the oxygen transfer ability of ceria; in particular, increasing the carbon–ceria interfacial area, the reactivity of CZ lattice oxygen is significantly improved. In addition, with a higher degree of contact, the soot oxidation is less affected by the presence of NOx. The NO oxidation over CZ in the presence of soot has also been analyzed. The existence of a core/shell structure strongly enhances reactivity of interfacial oxygen species while affecting negatively NO oxidation characteristics. These findings are significant in the understanding of the redox chemistry of substituted ceria and help determining the role of active species in soot oxidation reaction as a function of the degree of contact between ceria and carbon.

Facet-, composition- and wavelength-dependent photocatalysis of Ag2MoO4

Faceted β-Ag2MoO4 microcrystals are prepared by controlled nucleation and growth in diethylene glycol (DEG) or dimethylsulfoxide (DMSO). Both serve as solvents for the liquid-phase synthesis and surface-active agents for the formation of faceted microcrystals. Due to its reducing properties, truncated β-Ag2MoO4@Ag octahedra are obtained in DEG. The synthesis in DMSO allows avoiding the formation of elemental silver and results in β-Ag2MoO4 cubes and cuboctahedra. Due to its band gap of 3.2 eV, photocatalytic activation of β-Ag2MoO4 is only possible under UV-light. To enable β-Ag2MoO4 for absorption of visible light, silver-coated β-Ag2MoO4@Ag and Ag2(Mo0.95Cr0.05)O4 with partial substitution of [MoO4]2- by [CrO4]2- were prepared, too. The photocatalytic activity of all the faceted microcrystals (truncated octahedra, cubes, cuboctahedra) and compositions (β-Ag2MoO4, β-Ag2MoO4@Ag, β-Ag2(Mo0.95Cr0.05)O4) is compared with regard to the photocatalytic decomposition of rhodamine B and the influence of the respective faceting, composition and wavelength.

Function of various levels of hierarchical organization of porous Ce0.9REE0.1O1.95 mixed oxides in catalytic activity

Each level of hierarchical structure of the star-like Ce_0.9REE_0.1O_1.95 mixed oxides has its own functionality and is susceptible to modification.

Structure–redox reactivity relationships in Co1−xZnxFe2O4: the role of stoichiometry

The strong relation between the cationic distribution and catalytic properties of Co–Zn ferrite nanoparticles was studied and the new antistructure modeling approach has been proposed for identification of the active centers in the redox reaction.

Tuning the metal-support interaction in the thermal-resistant Au-CeO2 catalysts for CO oxidation: influence of a mild N2 pretreatment

Pretreatment is very important for altering the catalytic properties of the supported noble metal catalysts in many heterogeneous reactions. In this study, a simple and mild pretreatment with N₂ has been reported to re-activate the Au–CeO₂ catalysts that were prepared by a deposition–precipitation method followed by calcination at 600 °C. Upon N₂ pretreatment at 200 °C, the metal-support interaction between Au nanoparticles (NPs) and CeO₂ was observed with the evidence of particular coverage of Au nanoparticles by CeO₂, electronic interactions and changes in CO adsorption ability. As a result, the CO oxidation activity of the pretreated Au–CeO₂ catalysts largely improved compared with those without any pretreatment and even with those subjected to H₂ and O₂ pretreatments. N₂ pretreatment also makes the Au NPs more resistant to sintering at high temperature. Furthermore, this mild pretreatment strategy can provide a potential approach to improve the thermal stability of other supported noble metal catalysts.

The degree of encapsulation for Au–CeO₂ catalysts was identical to the catalysts exhibiting metal-support interaction, which improved the CO oxidation activity.

Ag/CeO2 Composites for Catalytic Abatement of CO, Soot and VOCs

Nowadays catalytic technologies are widely used to purify indoor and outdoor air from harmful compounds. Recently, Ag–CeO2 composites have found various applications in catalysis due to distinctive physical-chemical properties and relatively low costs as compared to those based on other noble metals. Currently, metal–support interaction is considered the key factor that determines high catalytic performance of silver–ceria composites. Despite thorough investigations, several questions remain debating. Among such issues, there are (1) morphology and size effects of both Ag and CeO2 particles, including their defective structure, (2) chemical and charge state of silver, (3) charge transfer between silver and ceria, (4) role of oxygen vacancies, (5) reducibility of support and the catalyst on the basis thereof. In this review, we consider recent advances and trends on the role of silver–ceria interactions in catalytic performance of Ag/CeO2 composites in low-temperature CO oxidation, soot oxidation, and volatile organic compounds (VOCs) abatement. Promising photo- and electrocatalytic applications of Ag/CeO2 composites are also discussed.

Superior catalytic performance of a CoOx/Sn–CeO2 hybrid material for catalytic diesel soot oxidation

A Co₃O₄/Sn–CeO₂ hybrid catalyst exhibited superior soot oxidation activity due to the existence of synergism among the multivalent cations and the stepped surface of the hybrid catalyst.