Solar photo-Fenton-like process at neutral pH: Fe(III)-EDDS complex formation and optimization of experimental conditions for degradation of pharmaceuticals

Green synthesis of carbon quantum dots from nutshells for enhanced performance in dye-sensitized solar cells

This study presents a sustainable approach to large scale synthesis of carbon quantum dots (CQDs) from nutshells, a widely available waste from biomass, using hydrogen peroxide (H2O) as the oxidizing agent in a hydrothermal process. The conditions of synthesis, including concentration of H2O2, reaction temperature and time, have been systematically optimized. The results show that optimal conditions include a concentration of 2.5% H2O2, a reaction temperature of 180 °C and a reaction time of 12 hours. The obtained CQDs have an average size of 3 nm and excellent fluorescence. The 2 L Parr reactor has been used to increase the production process and make it more viable for industrial applications. By-products of the reaction, including gas, liquid and solid residues, have been analyzed to understand the distribution of carbon. In addition, CQDs have been incorporated in dye-sensitive solar cells (DSSCs) where they have significantly improved the photovoltaic performance, with increased current density and overall efficiency. This work highlights the potential of biomass-based CQDs for the sustainable production of nanomaterials and for energy conversion applications, and offers a scalable and environmentally friendly alternative to synthesis of CQDs.

Remarkable simultaneous degradation of cephalexin and amoxicillin employing magnetic nano-catalyst supported on bentonite by heterogeneous photo-Fenton

In the present study, the heterogeneous catalysts were synthesized using a facile, economical and environmentally friendly method supported on the natural mineral bentonite to degrade amoxicillin (AMX) and cephalexin (CLX) in the aqueous solutions by employing the photo-Fenton process. The characterization tests including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscope (FESEM), energy dispersive X-ray (EDAX), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS) and vibrating sample magnetometer (VSM) were evaluated to distinguish the physical and chemical properties of the nanocomposites. The adsorption capacity and catalytic performance of the prepared samples for the removal of AMX were investigated in order to compare the presented catalysts, in addition to the structural analysis. Among the fabricated samples, the magnetic nano-catalyst derived from two different sources of iron (ferrous sulfate and ferric nitrate) named FSF-Be was selected as the appropriate catalyst due to its high efficiency for the simultaneous degradation of CLX and AMX. Response surface method (RSM-central composite design (CCD)) was also applied to determine the effect of the operating conditions encompassing pH, initial concentration of contaminants, dosage of catalyst and hydrogen peroxide concentration for the degradation of CLX and AMX, simultaneously. The quadratic mathematical models were developed with high correlation coefficient (0.9454 and 0.9564) for the removal efficiency of AMX and CLX, respectively. Therefore, the maximum degradation efficiency of CLX and AMX was obtained to be about 96.36% and 81.61%, respectively, at the optimal conditions (pH of 3, H2O2 concentration of 12 mM, catalyst dosage of 0.24 g/L and initial concentration of 23 mg/L) in half hour. The ozonation and the combined photo-Fenton/ozone process were investigated. The mineralization analysis illustrated that the photo-Fenton process was able to remove TOC by 73.35%, while only 2.44% of TOC removal was reached by ozonation. The degradation efficiency of CLX and AMX in the photo-Fenton/ozone system within 15 min of reaction was measured as 87.69% and 70.02%, respectively, and 61.9% mineralization was achieved in this system. However, the results showed that the photo-Fenton using FSF-Be was more efficient. The regeneration and reusability of the prepared nanocomposite was also carried out by five consecutive cycles which showed an acceptable performance in the industrial applications. The achievements demonstrated that the removal efficiency of CLX and AMX decreased about 24 and 18% after fifth cycle.

Toxicological effect of acetaminophen, metamizole, and nimesulide cocktail on early development of zebrafish

BACKGROUND

Several countries' most incorrectly discarded medicines are acetaminophen (ACM), metamizole (MTZ), and nimesulide (NMS). These xenobiotics easily reach the aquatic environment; such contamination is very important for the health of humans and other species, yet little explored.

OBJECTIVES

To evaluate the cocktail effect of ACM, MTZ, and NMS during zebrafish's initial development.

METHODS

Zebrafish embryos 6-8 h post-fertilization (hpf) were exposed to different concentrations of ACM, MTZ, and NMS, separately, to obtain the 50% lethal concentrations (LC50). Next, the embryos were exposed to distinct concentrations of the cocktail (LC50/2, LC50/5, LC50/10, and LC50/20) in a semi-static system. Samples were analyzed 0, 24, 48, and 96 h after exposure, and the drugs' concentrations in E3 medium were assessed by high-performance liquid chromatography. For embryotoxicity evaluation, the mortality, hatching, and heart rates; total length; and pericardial and yolk sac areas were determined. In addition, body malformations, edemas, presence of pigmentation, and histopathological assessments were also recorded.

RESULTS

The LC50 values obtained for MTZ, ACM, and NMS were 4.69 mgmL-1, 799.98 μgmL-1, and 0.92 μgmL-1, respectively. No difference was observed between the drugs' nominal and observed concentrations at each time point. The cocktail significantly induced mortality and decreased hatching in the LC50/10, LC50/5, and LC50/2 groups. Additionally, body malformations, pigmentation loss, and yolk sac and pericardial edemas were observed in the cocktail groups. The cocktail groups' larvae had decreased total length and slower heart rates compared to the controls (p < 0.05). The histopathological assessment showed that yolk sac edema promoted severe histological changes in the esophageal-intestine junction and intestine in larvae treated with cocktails. Moreover, PAS-positive structures decreased in the esophageal-intestine junction, intestine, and liver in larvae exposed to pharmaceutical cocktails.

CONCLUSION

This study's findings suggest the cocktail of ACM, MTZ, and NMS may be hazardous to aquatic organisms in case of environmental contamination.

Optimization, kinetics, and pathways of pharmaceutical pollutant degradation using solar Fenton technique

Solar Fenton is an important and extensively used advanced oxidation process (AOP) to degrade pharmaceutical pollutants. The objective of this study was to evaluate the performance of simultaneous degradation of the mixed pollutants (amoxicillin, acetaminophen, and ciprofloxacin) for an aqueous solution using the solar Fenton process. Operating parameters such as pH, iron doses, H2O2 doses, pollutant concentrations, and time were studied. From the experimental results, the ideal conditions were obtained for the removal of mixed pollutants such as pH 3, Fe2+ 0.04 mM, H2O2 4 mM, the concentration of the mixed pollutants 5 mg/L, solar radiation 400 W/m2, and time 10 min, respectively. The pseudo-first-order kinetics were utilized to investigate the degradation efficacy of the mixed pollutants. The result of the study indicates that the degradation efficiency was > 99% for the mixed pollutants. A maximum of 63% mineralization was observed, and hydroxyl radical scavenger effects were studied. The best optimal conditions were applied to assess the spiked wastewater (municipal wastewater (MWW) and hospital wastewater (HWW)). The highest elimination rates for AMX, ACET, and CIP were observed as 65%, 89%, and 85% for MWW and 76%, 92%, and 80% for HWW, respectively. The degraded by-products were detected by LC-ESI-MS in the water matrix (aqueous solution and spiked wastewater), and ECOSAR analysis was performed for the transformed products. The study concluded that the solar Fenton technique is promising and effective for the removal of mixed pollutants from the water matrix.

Molecular level removal of antibiotic resistant bacteria and genes: A review of interfacial chemical in advanced oxidation processes

As a kind of novel and persistent environmental pollutants, antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) have been frequently detected in different aquatic environment, posing potential risks to public health and ecosystems, resulting in a biosecurity issue that cannot be ignored. Therefore, in order to control the spread of antibiotic resistance in the environment, advanced oxidation technology (such as Fenton-like, photocatalysis, electrocatalysis) has become an effective weapon for inactivating and eliminating ARB and ARGs. However, in the process of advanced oxidation technology, studying and regulating catalytic active sites at the molecular level and studying the adsorption and surface oxidation reactions between catalysts and ARGs can achieve in-depth exploration of the mechanism of ARGs removal. This review systematically reveals the catalytic sites and related mechanisms of catalytic antagonistic genes in different advanced oxidation processes (AOPs) systems. We also summarize the removal mechanism of ARGs and how to reduce the spread of ARGs in the environment through combining a variety of characterization methods. Importantly, the potential of various catalysts for removing ARGs in practical applications has also been recognized, providing a promising approach for the deep purification of wastewater treatment plants.

Chelating agents supported solar photo-Fenton and sunlight/H2O2 processes for pharmaceuticals removal and resistant pathogens inactivation in quaternary treatment for urban wastewater reuse

In this work, Fe³⁺-iminodisuccinic acid (Fe:IDS) based solar photo Fenton (SPF), an Italian patented method, was investigated in quaternary treatment of real urban wastewater and compared to Fe³⁺-ethylenediamine-N,N'-disuccinic acid (Fe:EDDS) for the first time. Three pharmaceuticals (PCs) (sulfamethoxazole, carbamazepine and trimethoprim) and four pathogens (Escherichia coli, somatic and F-plus coliphages, Clostridium perfringens, consistently with the new EU regulation for wastewater reuse (2020/741)), were chosen as target pollutants. SPF with Fe:EDDS was more effective in PCs removal (80%, 10 kJ L^-1) than the SPF with Fe:IDS (58%), possibly due to the higher capability of generating hydroxyl radicals. On the contrary, Fe:IDS was more effective (4.3 log inactivation for E. coli) than Fe:EDDS (1.9 log) in pathogens inactivation, possibly due to a lower iron precipitation and turbidity which finally promoted an improved intracellular photo-Fenton mechanism. Fe:L based SPF was subsequently coupled to sunlight/H₂O₂. Interestingly, while its combination with Fe:EDDS based SPF slightly increased disinfectant efficacy (2.3 vs 1.9 log inactivation for E. coli), the combination with Fe:IDS decreased inactivation efficiency (3.4 vs 4.3 log reduction). In conclusion, due to the good compromise between PCs removal and disinfection efficiency, Fe:IDS SPF alone is an attractive option for quaternary treatment for urban wastewater reuse.

Photo-Fenton oxidation of cylindrospermopsin at neutral pH with LEDs

Cylindrospermopsin (CYN) is a potent cyanobacterial toxin found in freshwaters worldwide. In this work, the feasibility of the photo-Fenton process under neutral pH using light emitting diodes as irradiation source for the removal of this hazardous cyanotoxin from freshwater was investigated. The impact of the kind of iron chelating agent (ethylenediamine-N, N'-disuccinic acid vs. ethylenedinitrilotetraacetic acid) as well as the effect of the main operating conditions viz. H₂O₂ dose, Fe(III) load, initial CYN concentration, and Fe(III):EDDS molar ratio on the performance of the process was systematically evaluated. EDDS was selected as the most appropriate iron chelating agent considering the kinetics of the process and the environmental impact (Vibrio fischeri and Artemia salina). Under optimized conditions ([H₂O₂] = 30 mg L^-1; [Fe(III)] = 5 mg L^-1; Fe(III):ligand = 1:0.5 (molar ratio)), complete removal of CYN was achieved in 15-min reaction time. Furthermore, the catalytic system showed to be effective in real water matrices (river and reservoir waters) spiked with CYN. Although the presence of inorganic ions (mainly HCO₃^-/CO₃^2-) and dissolved organic carbon decreased the oxidation rate of CYN due to scavenging reactions and iron coordination, respectively, complete elimination of the cyanotoxin was achieved in all cases. The fate of EDDS along the process was also evaluated to demonstrate that the catalytic system investigated, apart from its effectiveness, warrants the complete absence of residues after reaction. Therefore, the proposed system constitutes a promising method for cyanotoxin treatment either as a drinking water treatment step in conventional plants or as a potential remediation strategy in the natural environment.

Two-stage preparation of highly mesoporous carbon for super-adsorption of paracetamol and tetracycline in water: Important contribution of pore filling and π-π interaction

This study aimed to develop an extremely highly porous activated carbon derived from soybean curd residues (SCB-AC) through two-step pyrolyzing coupled with KOH activating process and then apply it for removing paracetamol (PRC) and tetracycline (TCH) from water. The optimal conditions for chemical activation were 800 °C and the ratio of KOH to material (4/1; wt./wt.). SCB-AC adsorbents (before and after adsorption) were characterized by Brunauer-Emmet-Teller (BET) analyser, Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy, and Raman spectroscopy. Adsorption kinetics, isotherm, and thermodynamics were concluded under batch experiments. The effects of pH (2-10) and NaCl (0-1 M) on adsorption processes were investigated. Reusable properties of laden SCB-AC were evaluated by studying desorption and cycles of adsorption/desorption. Results indicated that SCB-AC exhibited a large specific surface area (3306 m²/g) and high total pore volume (2.307 cm³/g), with mesoporous volume accounting for 86.9%. Its porosity characteristics (average pore width: 2.725 nm) are very appropriate for adsorbing two pharmaceuticals through pore-filling mechanism. Adsorption processes were less affected by the parameters: pH, NaCl, and water matrixes. The kinetics for adsorbing PRC reached a faster equilibrium than that for TCH. The Langmuir maximum adsorption capacity of SCB-AC (pH_eq 7.0 and 25 °C) was 1235 mg/g (for adsorbing TCH) and 646 mg/g (PRC). Pore filling (confirmed by BET analyser) and π-π interaction (confirmed by FTIR and Raman spectroscopy) were dominant adsorption mechanisms. Those mechanisms were physisorption (ΔH° = 13.71 and -21.04 kJ/mol for adsorbing TCH and PRC, respectively). SCB-AC can serve as an outstanding material for removing pharmaceuticals from water.

Challenges on solar oxidation as post-treatment of municipal wastewater from UASB systems: Treatment efficiency, disinfection and toxicity

The application of solar photo-Fenton as post-treatment of municipal secondary effluents (MSE) in developing tropical countries is the main topic of this review. Alternative technologies such as stabilization ponds and upflow anaerobic sludge blanket (UASB) are vastly applied in these countries. However, data related to the application of solar photo-Fenton to improve the quality of effluents from UASB systems are scarce. This review gathered main achievements and limitations associated to the application of solar photo-Fenton at neutral pH and at pilot scale to analyze possible challenges associated to its application as post-treatment of MSE generated by alternative treatments. To this end, the literature review considered studies published in the last decade focusing on CECs removal, toxicity reduction and disinfection via solar photo-Fenton. Physicochemical characteristics of effluents originated after UASB systems alone and followed by a biological post-treatment show significant difference when compared with effluents from conventional activated sludge (CAS) systems. Results obtained for solar photo-Fenton as post-treatment of MSE in developed countries indicate that remaining organic matter and alkalinity present in UASB effluents may pose challenges to the performance of solar advanced oxidation processes (AOPs). This drawback could result in a more toxic effluent. The use of chelating agents such as Fe³⁺-EDDS to perform solar photo-Fenton at neutral pH was compared to the application of intermittent additions of Fe²⁺ and both of these strategies were reported as effective to remove CECs from MSE. The latter strategy may be of greater interest in developing countries due to costs associated to complexing agents. In addition, more studies are needed to confirm the efficiency of solar photo-Fenton on the disinfection of effluent from UASB systems to verify reuse possibilities. Finally, future research urges to evaluate the efficiency of solar photo-Fenton at natural pH for the treatment of effluents from UASB systems.

Use of organic fertilizers in solar photo-Fenton process as potential technology to remove pineapple processing wastewater in Costa Rica

Background: This work studied the use of the organic fertilizers DTPA-Fe and EDDS-Fe as iron chelates for solar driven photo-Fenton process at natural pH. This process was proposed to investigate its performance on removing a mixture of agrochemicals (propiconazole, imidacloprid and diuron) from pineapple processing wastewater to obtain a suitable effluent to be reused in the agricultural sector. Methods: Experiments were carried out in a solar simulator with a stirred cylindric photoreactor, with a volume of 150 mL and controlled temperature (20°C). The first set of experiments was carried out with ultrapure water to determine optimal iron and H 2O 2 concentrations. The second was performed with simulated wastewater of pineapple processing. Results: The optimized operational conditions for both iron complexes were 10 mg L -1 of Fe (III) and 25 mg L -1 of H 2O 2, since more than 80% of micropollutants (MP) (at an initial concentration of 1 mg L -1 of each compound) were removed in only 20 min with both DTPA-Fe and EDDS-Fe. The effect of organic matter and inorganic salts on radicals scavenging and chelates stability was also investigated in the experiments performed with synthetic pineapple processing wastewater. The results disclosed differences depending on the iron complex. Nitrites were the principal component influencing the tests carried out with EDDS-Fe. While carbonates at low concentration only significantly affected the experiments performed with DTPA-Fe, they were the major influence on the MPs removal efficiency decrease. In contrast, the presence of Ca 2+ and Mg 2+ only influence on this last one. Finally, the results of phytotoxicity disclosed the suitability of treated effluent to be reused in the agricultural sector.  Conclusions: This work demonstrated that solar powered photo-Fenton catalysed by iron fertilizer EDDS is a suitable technology for depolluting water streams coming from pineapple processing plants at circumneutral pH, and its subsequent reuse for crop irrigation.

A critical review on paracetamol removal from different aqueous matrices by Fenton and Fenton-based processes, and their combined methods

Paracetamol (PCT), also known as acetaminophen, is a drug used to treat fever and mild to moderate pain. After consumption by animals and humans, it is excreted through the urine to the sewer systems, wastewater treatment plants, and other aquatic/natural environments. It has been detected in trace amounts in effluents of wastewater plant treatments, sewage sludge, hospital wastewaters, surface waters, and drinking water. PCT can cause genetic code damage, oxidative degradation of lipids, and denaturation of protein in cells, and its toxicity has been well-proven in bacteria, algae, macrophytes, protozoan, and fishes. To avoid its harmful health problems over living beings, powerful Fenton and Fenton-based treatments as pre-eminent advanced oxidation processes (AOPs) have been developed because of the inefficient treatment by conventional treatments. This paper presents a comprehensive and critical review over the application of such Fenton technologies to remove PCT from natural waters, synthetic wastewaters, and real wastewaters. The characteristics and main results obtained using Fenton, photo-Fenton, electro-Fenton, and photoelectro-Fenton are described, making special emphasis in the oxidative action of the generated reactive oxygen species. Hybrid processes based on the coupling with ultrasounds, gamma radiation, photocatalysis, photoelectrocatalysis, zero-valent iron-activated persulfate, adsorption, and microbial fuel cells, are analyzed. Sequential treatments involving the initiation with plasma gliding arc discharge and post-biological process are detailed. Comparative results with other available AOPs are also described and discussed. Finally, 13 aromatic by-products and 9 short-linear aliphatic carboxylic acid detected during the PCT removal by Fenton and Fenton-based processes are reported, with the proposal of three parallel pathways for its initial degradation.

Roles of reactive oxygen species in antibiotic resistant bacteria inactivation and micropollutant degradation in Fenton and photo-Fenton processes

Reactive oxygen species play a critical role in degrading chemical or biological contaminants in advanced oxidation processes. However, it is still not clear whether conventional Fenton and photo-Fenton processes generate different reactive oxygen species, respectively. This study revealed the roles of reactive oxygen species (ROS) for simultaneous removal of antibiotic resistant bacteria (ARB) and recalcitrant micropollutant using three processes, i.e., conventional Fenton, photo-Fenton, and ethylenediamine-N, N'-disuccinic acid (EDDS) modified photo-Fenton. Both chemical scavengers and electron paramagnetic resonance spectroscopy confirmed the generation of various ROS and their contribution towards bacterial inactivation and micropollutant degradation. Results showed ARB and carbamazepine (CBZ) elimination efficiency in the order: EDDS modified photo-Fenton process > photo-Fenton process > Fenton process. The ARB detection limit (6-log ARB) was observed within 10 min at lower doses of 0.1 mM Fe³⁺, 0.2 mM EDDS, and 0.5 mM hydrogen peroxide (H₂O₂). With the same dose, it took longer (60 min) to remove CBZ, while 2.5 times higher H₂O₂ dose (1.25 mM) removed around 99% of CBZ within 10 min treatment. The present study highlighted that the hydroxyl radical (HO^•) plays a dominant role, while singlet oxygen (¹O₂) and superoxide radical anion (O₂^•-) exhibit moderate effects to remove the hazards. Our findings provide mechanistic insights into the role of various reactive oxygen species on degrading micropollutants and inactivating ARB.

Mechanistic investigations on the removal of diclofenac sodium by UV/S2O82-/Fe2+, UV/HSO5-/Fe2+ and UV/H2O2/Fe2+-based advanced oxidation processes

This study reports the comparative removal of an emerging contaminant diclofenac sodium (DCF) by UV-254 nm-based advanced oxidation processes (AOPs), i.e. UV/S₂O₈^2-/Fe²⁺, UV/HSO₅^-/Fe²⁺ and UV/H₂O₂/Fe²⁺ processes. The results demonstrated that by applying [DCF]₀ = 0.30 mM and [H₂O₂]₀ = [S₂O₈^2-]₀ = [HSO₅^-]₀ = 3 mM, k_app values were 0.082, 0.166, 0.221, 0.485 and 2.014 min^-1 for UV-only, UV/Fe²⁺, UV/H₂O₂/Fe²⁺, UV/S₂O₈^2-/Fe²⁺ and UV/HSO₅^-/Fe²⁺ processes, respectively. At different [DCF]₀ from 0.30 to 0.90 mM, the degradation rate was increased from 0.01 mM min^-1 to 0.12 mM min^-1, while the corresponding k_app values were decreased from 2.01 min^-1 to 1.04 min^-1. The removal performance of the applied AOP was significantly influenced by the presence of natural water contaminants (NO₃^-, Cl^-, HCO₃^-, SO₄^2- and humic acid (HA)) and [pH]₀. The inhibition of these natural water contaminants on the removal of DCF by UV/HSO₅-/Fe²⁺ process was in the order of HA > NO₂^- > SO₄^2- > HCO₃^- ≈ Cl^- > NO₃^-. Furthermore, seven (07) degradation products (DPs) of DCF were explored by UPLC-MS/MS and accordingly degradation pathways of DCF were suggested. The practical applications of the proposed AOPs towards the removal of DCF were further strengthened by calculating total organic carbon removal and toxicity assessment.

Effective treatment of hospital wastewater with high-concentration diclofenac and ibuprofen using a promising technology based on degradation reaction catalyzed by Fe0 under microwave irradiation

Real hospital wastewater was effectively treated by a promising technology based on degradation reaction catalyzed by Fe⁰ under microwave irradiation in this work. Fe⁰ powders were synthesized and characterized by different techniques, resulting in a single-phase sample with spherical particles. Optimum experimental conditions were determined by a central composite rotatable design combined with a response surface methodology, resulting in 96.8% of chemical oxygen demand reduction and 100% organic carbon removal, after applying MW power of 780 W and Fe⁰ dosage of 0.36 g L^-1 for 60 min. Amongst the several organic compounds identified in the wastewater sample, diclofenac and ibuprofen were present in higher concentrations; therefore, they were set as target pollutants. Both compounds were completely degraded in 35 min of reaction time. Their plausible degradation pathways were investigated and proposed. Overall, the method developed in this work effectively removed high concentrations of pharmaceuticals in hospital wastewater.

Toxicity reduction of persistent pollutants through the photo-fenton process and radiation/H2O2 using different sources of radiation and neutral pH

The presence of toxic compounds in aquatic bodies is of great concern, and the Fenton, photo-Fenton and radiation/H₂O₂ processes can be applied in the remediation of these compounds due to their efficiency and advantages. However, these processes need to be investigated to make them more viable and environmentally friendly. Thus, the reduction of toxicity was evaluated, through ecotoxicological tests with Artemia salina and Lactuca sativa, of the compounds 2,4-D, diazepam, nicotine and paracetamol (acetaminophen) by the Fenton, photo-Fenton and radiation/H₂O₂ process with UVC, UVA and natural solar radiation at neutral pH with low concentrations of Fe²⁺ and H₂O₂. The UVC/H₂O₂ process was efficient in the degradation of nicotine (74%), the photo-Fenton process was more efficient in the degradation of 2,4-D (82%), diazepam (27%) and paracetamol (85%) using solar radiation, UVA and UVC respectively. The toxicity and total organic carbon (TOC) tests showed a reduction in the toxicity of the compounds after treatment, except for diazepam, which was more resistant to the process, leading to a higher mortality of Artemia salinas (92%) and less relative seed germination of Lactuca sativa (40%).

Simultaneous removal of antibiotic resistant bacteria, antibiotic resistance genes, and micropollutants by a modified photo-Fenton process

Although photo-driven advanced oxidation processes (AOPs) have been developed to treat wastewater, few studies have investigated the feasibility of AOPs to simultaneously remove antibiotic resistant bacteria (ARB), antibiotic resistance genes (ARGs) and micropollutants (MPs). This study employed a modified photo-Fenton process using ethylenediamine-N,N'-disuccinic acid (EDDS) to chelate iron(III), thus maintaining the reaction pH in a neutral range. Simultaneous removal of ARB and associated extracellular (e-ARGs) and intracellular ARGs (i-ARGs), was assessed by bacterial cell culture, qPCR and atomic force microscopy. The removal of five MPs was also evaluated by liquid chromatography coupled with mass spectrometry. A low dose comprising 0.1 mM Fe(III), 0.2 mM EDDS, and 0.3 mM hydrogen peroxide (H₂O₂) was found to be effective for decreasing ARB by 6-log within 30 min, and e-ARGs by 6-log within 10 min. No ARB regrowth occurred after 48-h, suggesting that the proposed process is an effective disinfectant against ARB. Moreover, five recalcitrant MPs (carbamazepine, diclofenac, sulfamethoxazole, mecoprop and benzotriazole at an initial concentration of 10 μg/L each) were >99% removed after 30 min treatment in ultrapure water. The modified photo-Fenton process was also validated using synthetic wastewater and real secondary wastewater effluent as matrices, and results suggest the dosage should be doubled to ensure equivalent removal performance. Collectively, this study demonstrated that the modified process is an optimistic 'one-stop' solution to simultaneously mitigate both chemical and biological hazards.

Chemical and toxicological evaluation along with unprecedented transformation products during photolysis and heterogeneous photocatalysis of chloramphenicol in different aqueous matrices

As the presence of antibiotics in environmental waters enhances antimicrobial resistance, photolysis and heterogeneous photocatalysis of chloramphenicol (CAP) were evaluated in deionized water (DW) and in sewage treatment plant (STP) effluent under black light and solar irradiation. Processes were compared in terms of CAP degradation, reaction kinetics, and electrical energy per order, as well as regarding theoretical toxicity, biodegradability, carcinogenicity, and mutagenicity of transformation products (TPs). Rate constants obtained under photolysis (0.008 min^-1) and heterogeneous photocatalysis (0.18 min^-1) only differed in DW. This is due to the generation of photo-active reactive oxygen species (HO^· and HO₂^·-/O₂^·-) under photolysis in STP effluent, as verified by experiments in the presence of 2-propanol and chloroform. Natural organic matter and HCO₃^- were the main responsible for reducing CAP degradation in STP effluent. Fifteen TPs were identified during both processes in DW, 13 of which are unprecedented. TPs were formed mainly via HO^· preferential attack on the aromatic ring and on the α-carbon, and some of them were classified as persistent and toxic, genotoxic, or carcinogenic by Toxtree software. Results confirm that solar photocatalysis is less costly than to photocatalysis under black light for wastewater treatment.

Developments in the intensification of photo-Fenton and ozonation-based processes for the removal of contaminants of emerging concern in Ibero-American countries

Contaminants of emerging concern (CECs), such as pharmaceuticals, personal care products, pesticides, synthetic and natural hormones and industrial chemicals, are frequently released into the environment because of the inability of conventional processes in municipal wastewater treatment plants to remove them. Some examples of alternative options to remove such pollutants are photo-Fenton and ozone-based processes, which are two techniques widely studied in Ibero-American countries. In fact, this region has been responsible for delivering frequently publications and conferences on advanced oxidation processes. This work is a critical review of recent developments in the intensification of the two aforementioned advanced oxidation techniques for CECs elimination in the Ibero-American region. Specifically for the photo-Fenton process (pF), this study analyses strategies such as iron-complexation with artificial substances (e.g., oxalic acid and ethylenediamine-N,N'-disuccinic acid) and natural compounds (such as humic-like substances, orange juice or polyphenols) and hybrid processes with ultrasound. Meanwhile, for ozonation, the enhancement of CECs degradation by adding hydrogen peroxide (i.e., peroxone), ultraviolet or solar light, and combining (i.e., photolytic ozonation) with catalysts (i.e., catalytic ozonation) was reviewed. Special attention was paid to how efficient these techniques are for removing contaminants from water matrices, and any potentialities and weak points of the intensified processes.

Degradation of 2,4-Dichlorophenol by Ethylenediamine-N,N′-disuccinic Acid-Modified Photo-Fenton System: Effects of Chemical Compounds Present in Natural Waters

This paper describes a study of the treatment of 2,4-dichlorophenol (2,4-DCP) with an ethylenediamine-N,N′-disuccinic-acid (EDDS)-modified photo-Fenton system in ultrapure water and different natural waters. The results showed that the EDDS-modified photo-Fenton system is adequate for 2,4-DCP degradation. Compared with a medium containing a single organic pollutant, the removal of pollutants in a more complex medium consisting of two organic compounds is slower by around 25 to 50% as a function of the organic pollutant. Moreover, 2,4-DCP can be further effectively degraded in the presence of organic materials and various inorganic ions. However, the photodegradation of 2,4-DCP in different natural waters, including natural lake water, effluent from domestic sewage treatment plants, and secondary effluent from pulp and paper mill wastewaters, is inhibited. Chemical compounds present in natural waters have different influences on the degradation of 2,4-DCP by adopting the EDDS-modified photo-Fenton system. In any case, the results obtained in this work show that the EDDS-modified photo-Fenton system can effectively degrade pollutants in a natural water body, which makes it a promising technology for treating pollutants in natural water bodies.

Reducing toxicity and antimicrobial activity of a pesticide mixture via photo-Fenton in different aqueous matrices using iron complexes

This is the first study to investigate ethylenediamine-N,N'-disuccinic acid (EDDS)/photo-Fenton process to polish real wastewater containing pesticides for possible water reuse. To this end, simultaneous degradation of pesticides ametrine, atrazine, imidacloprid and tebuthiuron was evaluated in distilled water (DW) and in sewage treatment plant (STP) effluent at initial pH 6.0. Several operational parameters (Fe³⁺-EDDS concentration, Fe³⁺-EDDS molar ratio, EDDS addition patterns and radiation source) were evaluated. 80-98% removal of target pesticides were obtained in DW using 30 μmol L^-1 of Fe³⁺-EDDS with a molar ratio of 1:2 (300 μmol L^-1 of H₂O₂). In addition, the proposed Fe³⁺-EDDS photo-Fenton at pH 6 was more efficient than classic photo-Fenton at pH 2.7 (30-84% removal). Experiments conducted in the presence of radical trapping agents (2-propanol or chloroform) revealed that HO^• was the most active radical during treatment. Matrix composition strongly affected the degradation of target pesticides as a six-fold higher concentration of reagents (180 μmol L^-1 of Fe³⁺-EDDS and 1800 μmol L^-1 of H₂O₂) was needed to reach the same efficiency in STP compared to DW. Even so, first order rate constants corresponding to the degradation of pesticides in DW (k = 0.098-0.85 min^-1) were nearly two-fold higher than in STP (k = 0.079-0.49 min^-1) under the same radiation source (black-light or solar radiation). Finally, acute toxicity towards Vibrio fischeri and Drosophila melanogaster flies, and antibacterial activity assessed for Escherichia coli were eliminated after the application of the proposed treatment, thus indicating environmental safety for either discharge or reuse of treated wastewater for crop irrigation in agriculture.

Proposal of a new, fast, cheap, and easy method using DLLME for extraction and preconcentration of diazepam and its transformation products generated by a solar photo-Fenton process

This work evaluated the formation of transformation products (TPs) during the degradation of diazepam (DZP) by a solar photo-Fenton process. Six TPs were identified, three of them for the first time. After elucidation of the TPs, a new, cheap, fast, and easy method was employed to extract and preconcentrate DZP and its TPs, using dispersive liquid-liquid microextraction (DLLME). The method was optimized using factorial and Doehlert designs, with the best results obtained using acetonitrile as disperser solvent and chloroform as extraction solvent, with volumes of 1000 and 650 µL, respectively. When DZP degradation was performed in ultrapure water, the extraction/preconcentration of DZP and its TPs by DLLME was very similar to the results obtained using a traditional SPE method. However, when hospital wastewater was used as the matrix, more limited extraction efficiency was obtained using DLLME, compared to SPE. Meanwhile, all the TPs extracted by SPE were also extracted by the DLLME technique. Furthermore, DLLME was much less expensive than SPE, besides being faster, easier, and requiring only small amounts of organic solvents. This work reports a new and very important tool for the extraction and preconcentration of TPs formed during degradation using techniques such as advanced oxidation processes (AOPs), since without this step it would not be possible to identify all the TPs formed in some complex wastewater matrices.

Efficient inactivation of antibiotic resistant bacteria and antibiotic resistance genes by photo-Fenton process under visible LED light and neutral pH

Antibiotic resistance has been recognized as a major threat to public health worldwide. Inactivation of antibiotic resistant bacteria (ARB) and degradation of antibiotic resistance genes (ARGs) are critical to prevent the spread of antibiotic resistance in the environment. Conventional disinfection processes are effective to inactivate water-borne pathogens, yet they are unable to completely eliminate the antibiotic resistance risk. This study explored the potential of the photo-Fenton process to inactivate ARB, and to degrade both extracellular and intracellular ARGs (e-ARGs and i-ARGs, respectively). Using Escherichia coli DH5α with two plasmid-encoded ARGs (tetA and bla_TEM-1) as a model ARB, a 6.17 log ARB removal was achieved within 30 min of applying photo-Fenton under visible LED and neutral pH conditions. In addition, no ARB regrowth occurred after 48-h, demonstrating that this process is very effective to induce permanent disinfection on ARB. The photo-Fenton process was validated under various water matrices, including ultrapure water (UPW), simulated wastewater (SWW) and phosphate buffer (PBS). The higher inactivation efficiency was observed in SWW as compared to other matrices. The photo-Fenton process also caused a 6.75 to 8.56-log reduction in eARGs based on quantitative real-time PCR of both short- and long amplicons. Atomic force microscopy (AFM) further confirmed that the extracellular DNA was sheared into short DNA fragments, thus eliminating the risk of the transmission of antibiotic resistance. As compared with e-ARGs, a higher dosage of Fenton reagent was required to damage i-ARGs. In addition, the tetA gene was more easily degraded than the bla_TEM-1 gene. Collectively, our results demonstrate the photo-Fenton process is a promising technology for disinfecting water to prevent the spread of antibiotic resistance.

Degradation of the anticancer drug flutamide by solar photo-Fenton treatment at near-neutral pH: Identification of transformation products and in silico (Q)SAR risk assessment

Flutamide (FLUT) is a non-steroidal drug mainly used in the treatment of prostate cancer and has been detected in the aquatic environment at ng L^-1 levels. The environmental fate and effects of FLUT have not yet been studied. Conventional treatment technologies fail to completely remove pharmaceuticals, so the solar photo-Fenton process (SPF) has been proposed as an alternative. In this study, the degradation of FLUT, at two different initial concentrations in ultra-pure water, was carried out by SPF. The initial SPF conditions were pH₀ 5, [Fe²⁺]₀ = 5 mg L^-1, and [H₂O₂]₀ = 50 mg L^-1. Preliminary elimination rates of 53.4% and 73.4%. The kinetics of FLUT degradation could be fitted by a pseudo-first order model and the k_obs were 6.57 × 10^-3 and 9.13 × 10^-3 min^-1 t_30W and the half-life times were 95.62 and 73.10 min t_30W were achieved for [FLUT]₀ of 5 mg L^-1 and 500 μg L^-1, respectively. Analysis using LC-QTOF MS identified thirteen transformation products (TPs) during the FLUT degradation process. The main degradation pathways proposed were hydroxylation, hydrogen abstraction, demethylation, NO₂ elimination, cleavage, and aromatic ring opening. Different in silico (quantitative) structure-activity relationship ((Q)SAR) freeware models were used to predict the toxicities and environmental fates of FLUT and the TPs. The in silico predictions indicated that these substances were not biodegradable, while some TPs were classified near the threshold point to be considered as PBT compounds. The in silico (Q)SAR predictions gave positive alerts concerning the mutagenicity and carcinogenicity endpoints. Additionally, the (Q)SAR toolbox software provided structural alerts corresponding to the positive alerts obtained with the different mutagenicity and carcinogenicity models, supporting the positive alerts with more proactive information.

A review on the use of chelating agents as an alternative to promote photo-Fenton at neutral pH: Current trends, knowledge gap and future studies

In this review, we have critically examined the alternatives to conventional photo-Fenton process such as the strategies to perform it in circumneutral pH in the so-called photo-Fenton like process. They include iron chelation, iron replacement with another metal and use of iron immobilized on surfaces of solid materials, use of iron oxides, among others. The use of such strategies can be employed to overcome the challenges identified in conventional photo-Fenton, moreover, advantages and drawback of each technique must be clarified and the recent achievements should be shared with the scientific community. The use of a chelating agent to make iron soluble at circumneutral pH presents many advantages when compared to other current techniques. However, the correct understanding of the chelating process, complex activity and the complex resistance along with the mechanism of radical production should be taken into account to prepare an effective photo-Fenton with complexed iron. The review also identifies the current trends in chelate assisted photo-Fenton process and the unexplored areas in this field of study. A discussion about the environmental and safety issues in the application of these methods, with emphasis to the Fe chelation strategy, was also considered with detailed review over the past ten years.

Expanding the application of photoelectro-Fenton treatment to urban wastewater using the Fe(III)-EDDS complex

This work reports the first investigation on the use of EDDS as chelating agent in photoelectro-Fenton (PEF) treatment of water at near-neutral pH. As a case study, the removal of the antidepressant fluoxetine was optimized, using an electrochemical cell composed of an IrO₂-based anode an air-diffusion cathode for in-situ H₂O₂ production. Electrolytic trials at constant current were made in ultrapure water with different electrolytes, as well as in urban wastewater (secondary effluent) at pH 7.2. PEF with Fe(III)-EDDS (1:1) complex as catalyst outperformed electro-Fenton and PEF processes with uncomplexed Fe(II) or Fe(III). This can be explained by: (i) the larger solubilization of iron ions during the trials, favoring the production of ^•OH from Fenton-like reactions between H₂O₂ and Fe(II)-EDDS or Fe(III)-EDDS, and (ii) the occurrence of Fe(II) regeneration from Fe(III)-EDDS photoreduction, which was more efficient than conventional photo-Fenton reaction with uncomplexed Fe(III). The greatest drug concentration decays were achieved at low pH, using only 0.10 mM Fe(III)-EDDS, although complete removal in wastewater was feasible only with 0.20 mM Fe(III)-EDDS due to the greater formation of ^•OH. The effect of the applied current and anode nature was rather insignificant. A progressive destruction of the catalytic complex was unveiled, whereupon the mineralization mainly progressed thanks to the action of ^•OH adsorbed on the anode surface. Despite the incomplete mineralization using BDD as the anode, a remarkable toxicity decrease was determined. Fluoxetine degradation yielded F^- and NO₃^- ions, along with several aromatic intermediates. These included two chloro-organics, as a result of the anodic oxidation of Cl^- to active chlorine. A detailed mechanism for the Fe(III)-EDDS-catalyzed PEF treatment of fluoxetine in urban wastewater is finally proposed.

A zinc-quinone battery for paired hydrogen peroxide electrosynthesis

Hydrogen peroxide is a commodity chemical with immense applications as an environmentally benign disinfectant for water remediation, a green oxidant for synthetic chemistry and pulp bleaching, an energy carrier molecule and a rocket propellant. It is typically synthesized by indirect batch anthraquinone process, where sequential hydrogenation and oxidation of anthraquinone molecules generates H₂O₂. This highly energy demanding catalytic sequence necessitates the advent of new reaction pathways with lower energy expenditure. Here we demonstrate a Zn-quinone battery for paired H₂O₂ electrosynthesis at the three phase boundary of its cathodic half-cell during electric power generation. The catalytic quinone half-cell of the Zn-quinone battery, mediates proton coupled electron transfer with molecular oxygen during its chemical regeneration thereby pairing peroxide electrosynthesis with electricity generation. Hydrogen peroxide synthesizing Zn-quinone battery (HPSB) demonstrated a peak power density of ~90 mW/cm² at a peak current density of ~145 mA/cm² while synthesizing ~230 mM of H₂O₂. HPSB offers immense opportunities as it distinctly couples electric power generation with peroxide electrosynthesis which in-turn transforms energy conversion in batteries truly multifunctional.

Total dissolved iron and hydrogen peroxide determination using the PhotoMetrixPRO application: A portable colorimetric analysis tool for controlling important conditions in the solar photo-Fenton process

The use of the solar photo-Fenton process for water treatment requires monitoring of the main conditions, especially the total dissolved iron concentration and the consumption of hydrogen peroxide. In this study, a new methodology using the PhotoMetrixPRO application was validated for rapid monitoring of total dissolved iron and hydrogen peroxide concentrations, and was tested in the solar photo-Fenton process. A comparison was made between the results obtained using a reference spectrophotometric method and the PhotoMetrixPRO application employing a portable device. Both methods were validated in terms of linearity, sensitivity, precision, robustness, and matrix effects. The degree of dispersion between the series of measurements obtained using UV-vis and portable device tool was low and was in compliance with the established Brazilian and ICH validation criteria. Additionally, PhotoMetrixPRO enabled the use of a smaller sample volume. The total volume generated of each sample is 1 mL, reducing 6 and 10 times the wastes produced in different validated methods. These results evidencing that the miniaturization can provide positive advantages in terms of simplicity, cost effectiveness, and less environmental impact. PhotoMetrixPRO offers significant advantages including rapid analysis, smaller sample volumes, and greater portability and accessibility.