Ce-doped ZnO as photocatalyst for carbamazepine degradation

Insight into homogeneous activation of sodium hypochlorite by dithionite coupled with dissolved oxygen (DO@NaClO/DTN) for carbamazepine degradation

Emerging contaminants (ECs) including carbamazepine (CBZ) in aquatic systems pose non-target risks to wildlife. We introduce an innovative advanced oxidation process (AOP) utilizing sodium hypochlorite (NaClO), which achieved 45.3 % degradation and mineralization of CBZ within 60 mins. Natural saturated state dissolved oxygen (DO, ∼7.5 mg·L-1) played a crucial role in synergistically activating NaClO with dithionite (DTN) without extra energy consumption. In DO@NaClO/DTN system, scavenging tests and electron spin resonance (ESR) analysis confirmed that ·OH and Cl· were dominant for CBZ degradation. The critical DO was responsible for the direct simultaneous production of ·OH and Cl·, confirmed by the greater thermodynamic data ΔG from density functional theory (DFT) calculation. These reactive species participate in subsequent transformations of SO4·-, O2·-, and 1O2. Preferential hydroxylation of CBZ first occurred due to the attacking at the reactive sites of C(21) and C(22) atoms. LC-MS/MS detection and DFT theoretical calculations also verified the sequent mechanisms of Meinwald rearrangement, deamidation and hydroxylation, cyclized hydroxylated and dehydrated with the decreasing ΔG. Ubiquitous Cl- accelerated CBZ degradation remarkably, regardless of its concentration. The significant enhancement of Cl- for CBZ degradation in DO@NaClO/DTN system suggest its promising application for ECs degradation in high-chloride seawater including offshore wastewater and tailwater in mariculture.

Effect of crystallite size reduction and widening of optical phonon vibration due to AC variation on ZnO/Mg composites in implementation of methylene blue degradation

The fashion industry's reliance on dyes contributes significantly to environmental pollution, which disturbs the ecological balance. To address this issue, we used ZnO/Mg combined with activated carbon (AC) at various concentrations (0.1 g, 0.5 g, and 1 g), which were synthesized via sol-gel and mechanical alloying processes. The analysis of X-ray diffraction shows reduced crystallite size, with d-spacing change ( → d ← ) for ZnO/Mg/AC (0.5 g) and ( ← d → ) for ZnO/Mg/AC (1 g), respectively. The results of the IR spectrum indicated the main vibrations is MgO and Zn-O bonds at wave numbers 673 cm-1 and 467 cm-1. It was found that ZnO/Mg/AC (1 g) shows high degradation performance D % : 86.15% as a consequence of reduced crystallite size: 22.67 nm, decreased skin depth: 0.002 cm, widening of optical phonon vibration ( Δ ( LO - TO ) ): 252 cm-1 and increased E g : 4.6 eV as a function AC variation. Moreover, the finding of high photocatalytic performance ≥  80% for 0.25 mL MB dissolved in 250 mL distilled water is obtained from all composites. Based on these results, ZnO/Mg/AC shows potential as a photocatalyst to solve the MB waste problem.

Green Synthesis of Er-Doped ZnO Nanoparticles: An Investigation on the Methylene Blue, Eosin, and Ibuprofen Removal by Photodegradation

We present a study on the green synthesis of undoped and Er-doped ZnO compounds using Mangifera indica gum (MI). A set of tests were conducted to assess the structure of the material. The tests included X-ray diffraction, Raman, and Fourier-transform infrared spectroscopy. Optical properties were studied using diffuse reflectance and photoluminescence. Morphological and textural investigations were done using SEM images and N2 adsorption/desorption. Furthermore, photocatalytic tests were performed with methylene blue (MB), yellow eosin (EY), and the pharmaceutical drug ibuprofen (IBU) under UV irradiation. The study demonstrated that replacing the stabilizing agent with Mangifera indica gum is an effective method for obtaining ZnO nanoparticles. Additionally, the energy gap of the nanoparticles exhibits a slight reduction in value. Photoluminescence studies showed the presence of zinc vacancies and other defects in both samples. In the photocatalytic test, the sample containing Er3+ exhibited a degradation of 99.7% for methylene blue, 81.2% for yellow eosin, and 52.3% for ibuprofen over 120 min. In the presence of methyl alcohol, the degradation of MB and EY dyes is 16.7% and 55.7%, respectively. This suggests that hydroxyl radicals are responsible for the direct degradation of both dyes. In addition, after the second reuse, the degradation rate for MB was 94.08%, and for EY, it was 82.35%. For the third reuse, the degradation rate for MB was 97.15%, and for EY, it was 17%. These results indicate the significant potential of the new semiconductor in environmental remediation applications from an ecological synthesis.

Degradation of carbamazepine in surface water: performance of Pd-modified TiO2 and Ce-modified ZnO as photocatalysts

Carbamazepine is a widely used antiepileptic drug to control and treat a variety of disorders that is frequently detected in surface water, and in municipal and urban wastewater. This recalcitrant pollutant could be removed by alternative advanced oxidation technology such as heterogeneous photocatalysis. Ce-modified ZnO and Pd-modified TiO2 were synthesized by a microwave-assisted sol-gel method. According to the characterizations (Raman spectroscopy, UV-Vis diffuse reflectance spectroscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy), a mixture of oxides was determined in both materials: CeO2/ZnO and PdO/TiO2. Photocatalytic degradation of carbamazepine in pure water under visible light (3 h) was assayed. The degradation percentage obtained with each catalyst was 80%, 53%, 20%, and 9% for ZnO, Ce-modified ZnO, TiO2, and Pd-modified TiO2, respectively. The leaching of Zn as a possible source of water contamination was tested, finding the lowest value for Ce-modified ZnO by adjusting the initial pH up to neutrality. Later, an environmentally relevant concentration of carbamazepine (228 µg L-1) was assayed, using local surface water (pH = 8.3). Despite the presence of other compounds in the real water matrix, after 5 h of photocatalysis, a 56% of degradation of the pharmaceutical and low leaching of Zn were achieved. The use of Ce-modified ZnO activated by visible light is a promising strategy for the abatement of pharmaceutical active compounds.

Emerging aspects of metal ions-doped zinc oxide photocatalysts in degradation of organic dyes and pharmaceutical pollutants - A review

In recent periods, a broad assortment of continual organic contaminants has been released into our natural water resources. Indeed, it is exceedingly poisonous and perilous to living things; thus, the elimination of these organic pollutants before release into the water bodies is vital. A variety of techniques have been utilized to remove these organic pollutants with advanced oxidation photocatalytic methods with zinc oxide (ZnO) nanoparticles being commonly used as a capable catalyst for contaminated water treatment. Nevertheless, its broad energy gap, which can be only stimulated under an ultraviolet (UV) light source, and high recombination pairs of electrons and holes limit their photocatalytic behaviors. However, numerous methods have been suggested to decrease its energy gap for visible regions. Including, the doping ZnO with metal ions (dopant) can be considered as an effectual route not only the reason for a movement of the absorption edges toward the higher (visible light) region but also to lower the electron-hole pair (e--h+) recombination. This review concentrated on the impact of dissimilar types of metal ions (dopants) on the advancement in the degradation performance of ZnO. So, this work demonstrates a vital review of contemporary attainments in the alteration of ZnO nanoparticles for organic pollutants eliminations. Besides, the effect of doping ions including transition metals, rare earth metals, and metal ions (substitutional and interstitial) concerning numerous types of altered ZnO are summarized. The photodegradation mechanisms for pristine and metal-modified ZnO nanoparticles are also conferred.

Photocatalytic degradation of Reactive Black dye using ZnO-CeO2 nanocomposites

This study presents the photocatalytic efficiency of ZnO-CeO₂ nanocomposites for the degradation of a model Reactive Black (RB) dye. Nano-CeO₂ was synthesized using cerium nitrate precursor solution via chemical precipitation. Synthesized nano-CeO₂ was mixed with ZnO nanoparticles in different mass ratios to obtain ZnO-CeO₂ heterojunction photocatalyst. The morphology of the nanocomposites was examined using transmission electron microscope (TEM). X-ray diffraction patterns of the CeO₂ corresponded well with (1 1 1) plane of cubic-phase CeO₂. The band gap of the ZnO-CeO₂ nanocatalyst synthesized was determined to be 3.08 eV, which was lower than that of the pristine CeO₂ and ZnO powders, respectively. The results indicate that 1:1 wt. ratio ZnO-CeO₂ nanocomposite provides about 85% RB degradation within 90 min under UV light under alkaline pH conditions. Degradation rate of RB dye achieved with ZnO-CeO₂ nanocomposite was almost 1.5 times greater than that obtained with pristine ZnO. Increasing CeO₂ ratio beyond 1:1 wt. ratio did not significantly increase RB degradation. The results demonstrate that addition of CeO₂ to ZnO results in lowering its band gap energy and aids charge carrier separation resulting in enhanced oxidation of RB dye under UV light.

Metal-oxide coated Graphene oxide nano-composite for the treatment of pharmaceutical compound in photocatalytic reactor: Batch, Kinetics and Mathematical Modeling using Response Surface Methodology and Artificial Neural Network

Titanium dioxide (TiO₂) photocatalyst has gained constant interest in the treatment of wastewater because of its greater stability, lower cost, low-toxicity, high efficiency, and more reactivity under UV radiation. On the other hand, Graphene oxide (GO) possesses high electron mobility, and therefore when GO is combined with TiO_2, the photocatalytic activity of TiO₂ is increased. In this study, nano-composite was synthesized in a hydrothermal reactor using two types of TiO₂ nanoparticles (TiO₂ consisting of a mixture of rutile and anatase phase (Type 1) and bioreduced TiO₂ (Type 2)) and the efficiency of both the TiO₂-GO nanocomposite to remove the drug Carbamazepine (CBZ) was investigated. The TiO₂-GO nanocomposite with the Type 1 TiO₂ exhibited greater efficiency hence further studies were conducted with that composite. The efficiency of TiO₂-GO nanocomposite for the purpose of removing CBZ were investigated in presence of different types of incident radiation like Solar radiation, white light and three type of Ultraviolet radiation (A, B, C). The removal of the drug by TiO₂-GO composite has been optimized using response surface methodology and artificial neural network. From this study, the maximum reduction was observed was 91.2% and whereas in case of the RSM optimization study the maximum removal that was observed was 91.7%. The validation of the RSM model was done using the mathematical analysis of the model equation of RSM. Different kinetics models was also analyzed using the experimental data and it was observed that it followed pseudo-second-order kinetics. The optimization using ANN also showed a close interaction with the experimental results.

Zinc oxide hollow spheres decorated with cerium dioxide. The role of morphology in the photoactivity of semiconducting oxides

The photochemical activity of the recently proposed CeO₂-ZnO photocatalytic material active under visible light has been improved by means of significant modifications of its morphology. A polymeric templating agent (Pluronic) has been used in the synthesis obtaining a particle morphology based on hollow spheres that is better defined in the case of high template concentration. The charge separation ability and the light-induced surface electron transfer under irradiation with visible polychromatic light in various ranges of wavelengths has been investigated by electron paramagnetic resonance. The reactivity of the photogenerated holes has been monitored by the spin trapping technique in the presence of DMPO. The hollow spheres morphology achieved through the synthesis here reported leads to systems with a higher photoactivity under visible irradiation than the same system displaying the classic platelets morphology. A parallel increase of the photocatalytic activity of this novel system in pollution remediation reactions is therefore predictable.

Magnetically separable type-II semiconductor based ZnO/MoO3 photocatalyst: a proficient system for heteroarenes arylation and rhodamine B degradation under visible light

Shedding light on a magnetically retrievable ZnO/MoO3 photocatalyst that efficiently coupled diazonium substituted arenes with heteroarene substrates along with efficient degradation of toxic Rhodamine B.

Cerium-, Europium- and Erbium-Modified ZnO and ZrO2 for Photocatalytic Water Treatment Applications: A Review

In the last decades photocatalysis has become one of the most employed technologies for the implementation of the so-called Advanced Oxidation Processes (AOPs) for the removal of harmful pollutants from wastewaters. The materials identified as the best photocatalysts are transition metal oxides, in which the band structure allows charge carrier separation upon solar irradiation. The photoinduced charge carrier can thus cause oxidative and reductive redox reactions at the surface, inducing the formation of the radical species able to initiate the AOPs. Despite the great advantages of this process (non-toxic, cheap and environmentally clean), the main drawback lies in the fact that the most efficient semiconductors are only able to absorb UV irradiation, which accounts for only 5% of the total solar irradiation at the Earth’s surface and not enough to generate the required amount of electron-hole pairs. On the other hand, many efforts have been devoted to the sensitization of wide band gap transition metal oxides to visible light, which represents a higher percentage (almost 45%) in the solar electromagnetic spectrum. Among all the strategies to sensitize transition metal oxides to visible irradiation, doping with lanthanides has been less explored. In this regard, lanthanides offer a unique electronic configuration, consisting in 4f orbitals shielded by a 5s5p external shell. This occurrence, coupled with the different occupation of the localized 4f orbitals would provide an astounding opportunity to tune these materials’ properties. In this review we will focus in depth on the modification of two promising photocatalytic transition metal oxides, namely ZnO and ZrO2, with cerium, europium and erbium atoms. The aim of the work is to provide a comprehensive overview of the influence of lanthanides on the structural, optical and electronic properties of the modified materials, emphasizing the effect of the different 4f orbital occupation in the three considered doping atoms. Moreover, a large portion of the discussion will be devoted to the structural-properties relationships evidencing the improved light absorption working mechanism of each system and the resulting enhanced photocatalytic performance in the abatement of contaminants in aqueous environments.

A comparative study of 0D and 1D Ce-ZnO nanocatalysts in photocatalytic decomposition of organic pollutants

Nanosized zinc oxide is an intriguing material that can be applied in various fields. In this study, Ce doped ZnO nano-catalysts (Ce-ZnO) were synthesized by two different methods (i.e., hydrothermal (Ce-ZnO-HT) and polymer gel combustion (Ce-ZnO-CB) methods) to compare their photodegradation efficiency. The prepared material characteristics were investigated using XRD, SEM, TEM, FTIR, UV-Vis, PL, XPS, EDS, and BET. The bandgap of both nanoparticles (NPs) was 2.95 eV, despite the fact that the morphology of Ce-ZnO-HT NPs was 1D-rod-shaped and that of Ce-ZnO-CB NPs was 0D-spherical. However, the surface area and oxygen vacancy rate of Ce-ZnO-HT NPs were higher than those of Ce-ZnO-CB NPs. These differences are directly related to the photocatalytic activity of Ce-ZnO NPs. Accordingly, the results showed that photocatalytic efficiency was classified in the order Ce-ZnO-HT > Ce-ZnO-CB > pure ZnO, and the photocatalytic reaction rate constant of Ce-ZnO-HT used to decompose MB was 3.0 times higher than that of Ce-ZnO-CB. Interestingly, the photodegradation mechanism study revealed that hydroxyl radicals and holes were shown to be more important contributors to methyl blue degradation than photo-induced electrons and superoxide radical ions.

Ce doped ZnO nano-catalysts were synthesized by two different methods i.e., hydrothermal and polymer gel combustion method, to compare their photodegradation efficiency.

A Brief Photocatalytic Study of ZnO Containing Cerium towards Ibuprofen Degradation

Ibuprofen (IBU) is one of the most-sold anti-inflammatory drugs in the world, and its residues can reach aquatic systems, causing serious health and environmental problems. Strategies are used to improve the photocatalytic activity of zinc oxide (ZnO), and thosethat involvethe inclusion of metalhave received special attention. The aim of this work was to investigate the influence of the parameters and toxicity of a photoproduct using zinc oxide that contains cerium (ZnO-Ce) for the photodegradation of ibuprofen. The parameters include the influence of the photocatalyst concentration (0.5, 0.5, and 1.5 g L-1) as well as the effects of pH (3, 7, and 10), the effect of H2O2, and radical scavengers. The photocatalyst was characterized by Scanning Electron Microscopy-Energy Dispersive Spectroscopy, Transmission electron microscopy, Raman, X-Ray Diffraction, surface area, and diffuse reflectance. The photocatalytic activity of ibuprofen was evaluated in an aqueous solution under UV light for 120 min. The structural characterization by XRD and SEM elucidated the fact that the nanoparticle ZnO contained cerium. The band gap value was 3.31 eV. The best experimental conditions for the photodegradation of IBU were 60% obtained in an acidic condition using 0.50 g L-1 of ZnO-Ce in a solution of 20 ppm of IBU. The presence of hydrogen peroxide favored the photocatalysis process. ZnO-Ce exhibited good IBU degradation activity even after three photocatalytic cycles under UV light. The hole plays akey role in the degradation process of ibuprofen. The toxicity of photolyzed products was monitored against Artemia salina (bioindicator) and did not generate toxic metabolites. Therefore, this work provides a strategic design to improve ZnO-Ce photocatalysts for environmental remediation.

Structural and thermal properties of pure and chromium doped zinc oxide nanoparticles

Abstract

Pure ZnO and Cr-doped ZnO nanoparticles have been synthesized via a facile chemical co-precipitation route and their structural, thermal characteristics were discussed systematically. In the experimental producer, the doping concentration has varied the range, 0.05–0.1 M, while calcined at 600 °C. The influence of Cr-doping on the physical characteristics of ZnO nanoparticles was investigated and addressed. As-prepared samples were analyzed via XRD, FTIR, TGA/DTA, BET, and ICP-MS. XRD analysis shows that ZnO and Cr doped ZnO nanoparticles with average particle sizes between 23 and 39 nm were successfully developed with hexagonal wurtzite structure. The FTIR spectroscopy analysis confirms the existence of chromium in the doped ZnO nanoparticles and the formation of ZnO. The TGA/DTA analysis shows that Cr–ZnO nanoparticles are more thermally stable than ZnO nanoparticles. Moreover, the dopant concentration has been analyzed via ICP-MS and showed a good agreement with the expected chromium concentration. The BET surface area measurement shows that 176.25 m2/g and 287.17 m2/g for un-doped ZnO, and 0.1 M Cr-doped ZnO nanoparticles, respectively. Hence, doping of Cr enhances the surface area and thermal stability. Thus, Cr–ZnO nanoparticles show good thermal stability, and high surface area, which is an excellent characteristices of nanomaterials.

Graphic abstract